Why only gets one node when select many nodes of tree in DWCS4 on Mac OS

I use tag <mm:treecontrol> to create tree in DWCS4 on Mac OS.
When I select many nodes in tree, but I only get one node by method: selectedNodes.
codes of created tree as following:
<mm:treecontrol name='tree' size='20' multiple noheaders>
     <mm:treecolumn state='hidden'>
          <mm:treenode value='A' state='expanded'></mm:treenode>
          <mm:treenode value='B' state='expanded'></mm:treenode>
          <mm:treenode value='C' state='expanded'></mm:treenode>
</mm:treecontrol>
Who can tell me reasons?
Thanks!
comments: if don't use tag <mm:treecolumn>, tree will not show on Mac OS.

Hi macbig,
I finally got to look at my sister's computer. The HDD "Repair Disk" found missing threads, missing directory records, etc. and ended with:
Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-
up files.
Then, I tried "Verify Disk" and it found invalid volume file count and ended with:
The volume Macintosh HD was found corrupted and needs to be repaired.
Error: This disk needs to be repaired. Click Repair Disk
I guess running Apple Hardware Test is not going to happen. :/
I've ordered online a new 2.5 disk, make a Maverick boot USB, and start from scratch. Do you have any other suggestions?
As for the corrupted old hard drive, do you have any suggestions of how to get out the data somehow?
Thank you so much!

Similar Messages

HT2954 In Mail Preferences Color & Fonts I select Georgia Bold Italic 14 for all fonts. Why do I only get Georgia 14 when writing?

In Mail Preferences>Color & Fonts I select Georgia Bold Italic 14 for all fonts. Why do I only get Georgia 14 when writing messages/replies?

Have you checked “Use classic layout”?

Mt iPhoto library has disappeared from my laptop after syncing my new iPhone with the laptop. I now have a new iPhoto library with no photos. I have tried pressing option when opening iPhoto but I only get one library option and can't find my old one

My iPhone4s was recently replaced by apple due to grey out on wifi. when I went to sync with my laptop my iPhoto library disapeared and I was left with an empty library. I cannot find my old library on my laptop. I only get one option for a library when i open iPhoto while holding down option key. I am worried I have lost all my photos. there seems ot be no iPhoto library on my iCloud either.
Any suggestions?

Syncing with an iPhone should not delete the iPhoto library on your mac. It only will upload photos to the phone (iTunes sync) or import (connecting by USB). How did you sync your phone?
TD, do you know of any way, that a sync could delete an iPhoto Library on a Mac?
You may have opened a wrong library or may be working from a different user account. Are you using the same user name and Apple ID as before?
How have you searched for iPhoto libraries? Have you searched with Spotlight?
Each iPhoto library contains a file called "Library6.iPhoto" - even if your iPhoto library should no longer be recognisable as photolibrary, this file should be found:
Type "Library6" into the "Spotlight" search field in the upper right corner of your screen, like this:
When you see a list of files, select one of them and hold down the key combination ⌥⌘ to reveal the path to the file.
If Spotlight cannot find the file in the packages, use "FindAnyFile" http://apps.tempel.org/FindAnyFile
Regards
Léonie

I am looking to upgrade to the entire CC suite from the Lightroom/Photoshop package. The packages page says the complete suite is available to existing customers for 29.99 monthly. But when I try to upgrade I only get one option for 599.99 yearly. Can I g

I am looking to upgrade to the entire CC suite from the Lightroom/Photoshop package. The packages page says the complete suite is available to existing customers for 29.99 monthly. But when I try to upgrade I only get one option for 599.99 yearly. Can I get clarification on the $29.99 offer and who it is available for. Thank you

Hi there
The 29.99 introductory offer is for existing CS customers ie customers with a CS3-CS6 product (suite or individual product).
Hope this clarifies matters.
Thanks
Bev

Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition

just bough OSX Mountain Lion, my laptop operating with v10.6.8. Can't install OSX Mountain Lion, on the disk selection screen i cant select the Macintosh HD to install OSX giving a message (This disk cannot be used to start up your computer).only have one disk to select and my partition map scheme is GUID partition table. 24.44gb disk available.

Verify your computer can run Mountain Lion:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Open Disk Utility and verify the drive is partitioned using GUID and formatted Mac OS Extended, Journaled. If it is then do this:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now try installing Mountain Lion.

Why i get x icon when i see bex report in web browser??

Hi Experts,
why i get x icon when i see bex report in web browser?? How can i avoid it..??
DV

DVMC,
This could be of two reasons. One is formula collision if you are using formulas in the report. You can set from the properties which formula to act.
Secondly, if you are having key figures data with diff dimensions i.e diff units or currencies used in calculations. This can be eliminated using NODIM() function in new formula.
Check out which case applies to you.....

4 domains names can only get one to work

4 domains names only 1 working
i can only get one to work and now its crossed with other domains
example i have jcsrealty.com all ready working fine. i want to post customxcycles.com on a new site but it cross over on to jcsrealty.com. so when you go to jcsrealty.com it pulls up customxcycles.com
and no jcsrealty
please help
thanks

Welcome to the Apple Discussions. Are you publishing to a MobileMe account? Is each site in its own domain file? If yes to both and you're using the CNAME method of domain name forwarding for the first site you published the last published site by iWeb will be the one that gets open when you enter your domain name. All additional sites must use the simple domain name (URL) forwarding.
There are a couple of ways to get around that:
1 - use the simple domain name (URL) forwarding for every one of your sites. That means pointing each site to its respective address on your MMe account: http://web.me.com/YourMMe_Account_Name/SiteName/.
2 - add a dummy site in each of the domain files as described by Wyodor in this post: Re: Is it possible to have multiple sites when using ur Domain name.
OT

LR5 version 5.3 abends when selecting media type in the print module; on Mac OSX 10.9.1. Why?

LR5 version 5.3 abends when selecting media type in the print module; on Mac OSX 10.9.1. Why? The printer is an Epson 4900.

I contacted Epson and the following steps resolved the problem.
Please close all of your programs to Repair Permissions:
1. Go to your Mac Hard Drive > Applications > Utilities and open the Disk Utility.
2. Click on and highlight your main Mac Hard Drive in the list on the left.
3. Select Repair Disk Permissions and once this is finished, restart your computer.
Once restarted, please do the following:
1. Open your System Preferences
2. Open Print & Fax (10.7/10.8/10.9 is Print & Scan)
3. Highlight your Epson printer in the Printer List on the left hand side of the window if it is showing in the list. If it is not showing up, continue to step 5
4. Click on the MINUS sign below the Printer List and confirm deletion of the printer
5. Click on the PLUS below the Printer List to re-add the printer
6. Click on and Highlight the Epson Printer in the window and confirm that in the USE field it reads for "EPSON XXXXXX"
7. If it does, click ADD and the printer should show up again in the Printer List and you can try to print again
If you are still having issue, try printing from Apples Preview and see if it print fine. If so, the issue would be PS and/or LR and you would need to troubleshoot the program installation.
We take your satisfaction seriously and hope that we have helped resolve your issue. If you receive a survey from us, we would greatly appreciate if you could take a few minutes to provide us with feedback about your support experience. Your ratings and comments are extremely important to us.
If this did not resolve your issue, please reply to this email for further assistance. If you have a different support issue, submit a request via our U.S. or Canada Support Site and we will respond in a timely manner.
Thank you again for contacting Epson.

I only get Facebook addresses when trying to compose email. How do I get hold of my other email addresses? IOS 6, iPad2

I only get Facebook addresses when trying to compose email. How do I update my contacts to reflect other email addresses?

Navigate to Settings, then Facebook, then Contacts OFF.

Why i get that message when i try to setup adobe photoshop?"session has dependencies that cannot be satisfied"

why i get that message when i try to setup adobe photoshop?"session has dependencies that cannot be satisfied"Photoshop General Discussion

YOu have not provided any system info nor the full install info, so nobody can say anything.
Mylenium

Recording stereo audio and only getting one side - what gives?

Recording audio in stereo mode in logic and only getting one side showing on the meter and same side showing on the audio file - I've checked the interface - is there a logic setting I'm missing?

Is Universal Track Mode enabled?

Only getting one channel of audio with mic HELP

I had been using Garageband with the built in mic to do my podcasts. I just got some real gear.
Here is what I got... M Audio USB fast track, MXL V63MBP running on 10.3.9
I am only getting one channel of audio through the mic. I have the settings on the mixer right and I have gone in the sound preferences and made sure it was right.
On the track in garageband, I made sure that the real instrument settings were set to Stereo. I have been messing around with this thing for an HOUR and I am still only getting one channel of audio. I've done everything I've been able to come up with in google and still nothing works. If anyone has any ideas ,that would be swell because I'm beginning to think that the crappy built in mic on my mac is looking really good about now.

You're welcome.
The common confusion is that 'Stereo" means two speakers and "mono" means one. Stereo actually means two different signals going to the two speakers. Since a Mic is a mono input device, you set the track to mono so that the same sound comes out of both speakers. Enjoy --Hang

When i upload my site via ftp to 3rd party hosting i only get 'index of/' when looking at the webpag

I have exported my site and even tested on adobe and everything looks ok. For some reason when I export and uplaod via ftp to my 3rd party hosting and look at the site I just get the index of/ and a list of the pages and directories underneath

Thanks for that. Now sorted. It was a problem on my hosting
Ian
cid:[email protected]
cid:[email protected]<http://twitter.com/dieselthefrog>[cid:[email protected]][cid:[email protected]]<http://www.facebook.com/dieselfrog>[cid:[email protected]][cid:[email protected]]<http://uk.linkedin.com/pub/ian-royle/30/a20/928>
From: Abhishek Maurya [email protected]
Sent: 04 July 2012 23:02
To: Ian
Subject: when i upload my site via ftp to 3rd party hosting i only get 'index of/' when looking at the webpag
Re: when i upload my site via ftp to 3rd party hosting i only get 'index of/' when looking at the webpag
created by Abhishek Maurya<http://forums.adobe.com/people/Abhishek+Maurya> in Help with using Adobe Muse - View the full discussion<http://forums.adobe.com/message/4538835#4538835

HT204380 I keep getting an error when attempting to log in to FaceTime on my Mac. "The server encoutered an error processing registration. Please try again later."

I keep getting an error when attempting to log in to FaceTime on my Mac. "The server encoutered an error processing registration. Please try again later."

Hey radyslav,
There's an article that applies to your situation, I'd follow the steps within here:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Take care,
Delgadoh

Why do I only get the audio when I play video files?

I only receive the audio portions when I play video files. The video is blank/black. This is happening with mpg., avchd and the videos posted to websites; YouTube, Facebook etc. The only video files I can play are windows media files. Windows media PLAYER won't play the other video files? I have the latest updates for my video card and adobe flash player. Thanks for any info! Elwood Windows 7 64 bit, i7 980x @333 6 core processor, 12 GB ram DDR 1600, Radeon 5850 GPU, OCZ Vertex 3 120GB SSD

It is most likely that the various files contain CODEC's, that are either not installed on your computer, or PrE is not able to use them.
You list several file types, and I would urge you to first see this FAQ Entry, then get one of the file info utilities, linked in it, G-Spot, MediaInfo, or MediaInspector, then post the details on the various CODEC's: http://forums.adobe.com/thread/440037?tstart=0
Also, that WMP cannot play the video indicates the likelihood of a CODEC issue.
Try either of the great, free media players, VLC Player, or MediaPlayer Classic HC. Both contain many useful CODEC's, but they do NOT install them into the OS.
Good luck, and with the CODEC info, someone can give your recommendations.
Hunt

Why only gets one node when select many nodes of tree in DWCS4 on Mac OS

Similar Messages

Maybe you are looking for