Why's this sound at the beginning of my recording?

After I send a song to iTunes, there's always a faint drum/synth sound heard later in the song that shows up at the very beginning of the track when it's not supposed to be there. Why is this? Is it because I haven't selected the loop and set the duration?

rsherid wrote:
After I send a song to iTunes, there's always a faint drum/synth sound heard later in the song that shows up at the very beginning of the track when it's not supposed to be there. Why is this? Is it because I haven't selected the loop and set the duration?
This may be a manifestation of a lingering bug in the audio engine that caches a reverb tail from the last play. If it's what I'm thinking of, a workaround would be to select all the tracks of your song, and move them all forward, in sync, about a measure or two. Looking at your tracks, it will appear as if the beginning of the song is now at measure 2 or 3 instead of 1. That way, there will be a moment of silence at the very beginning of the song (that clears out the cache), but then everything will start normally and play to the end, and it will get rid of the ghost echo at the beginning.

Similar Messages

Missing sound at the begining of chapter

I built a blu-ray disk with the following flowsheet (this flowsheet is OK according the "check project" feature) :
After the disk burning (with Nero 12 Burning Rom, not with Encore CS 6 which generates a well known error not fixed by Adobe), the "read first" before main menu is an AME transcoded sequence from PP CC. This sequence has an audio track, but only with the final burned blu-ray disk, the sound begins after about four or five seconds, not at the begining.
I checked the "montage" in Encore and the related .m2ts file in the BDMV directory : both are OK.
Is this a bug or if not where is the mistake ?

Hi,
Many thanks, I shall try and inform you.
I hace noticed that the sound start suddendly like it was blocked then
suddenly released.
Le 30/03/2014 18:53, John T Smith a écrit :
>
Re: Missing sound at the begining of chapter
created by John T Smith <http://forums.adobe.com/people/JohnTSmith>
in /Encore/ - View the full discussion
<http://forums.adobe.com/message/6255021#6255021

Clicking/popping sound at the beginning of tracks when going to next track

some of my songs have clicking/popping sound at the beginning of the track only when I hit the next track button
if I let the track end the pop/click won't happen
any idea what this is?

Re-import one of the of the problem CDs in a lossless format, such as AIFF or Apple Lossless. Play a little to verify that the tracks are good. Then use iTunes to convert them to AAC.
Verify that those new tracks are good, and if so, you can then discard the lossless versions and keep the AACs.

After upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings general Network says Not Available Why is this? Did the upgrade cause this?

after upgrading to IOS 5.1 I no longer can see Verizon at the top of my Iphone and under settings>general>Network>says Not Available Why is this? Did the upgrade cause this?
steve

See this tip --> http://support.apple.com/kb/TS1559
If this doesn't resolve it you most likely have a hardware failure. Fortunately, your phone is in warranty, so if you take it to an Apple store they will replace it.

As of today, I can no longer or Excel. I get this message: You can't open the application "Microsoft Excel" because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted 2x

As of today, I can no longer or Excel. I get this message: You can’t open the application “Microsoft Excel” because PowerPC applications are no longer supported. Is there a fix for this and why ha this all of the sudden happened. I've rebooted twice and that hasn't worked.

The application may be corrupt. Un-install and re-install Office.
Office 2011 Removal
Office 2011 Removal (2)

After I Repair The Permissions On My Mac Pro, Then I Verify The Permissions And They Have To Be Repaired Again And Again. Why Does This Happen All The Time. Please Reply, James

Hi,
After I Repair The Permissions On My Mac Pro, Then I Verify The Permissions And They Have To Be Repaired Again And Again.
Why Does This Happen All The Time.
Please Reply,
James

As long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
Poster rccharles has provided this description of what it all means:
drwxrwxrwx
d = directory
r = read
w = write
x = executeable program
drwxrwxrwx
| | |
| | all other users not in first two types
| |
| group
|
owner

While recording in captivate 4 I get a pop at the beginning of each recording

While recording narration over a PP conversion in captivate 4 I get a pop at the beginning of each recording, It doesn't seem to matter if I use keyboard shortcut or the mouse. Any thoughts?
Paul

Welcome to our community
Is the unwanted bit part of the countdown?
If so, there are a couple of ways to avoid it.
1. Don't record your narration at the same time you record the actions. Record it separately. No narration means no countdown.
2. After the countdown stops, consider that first slide to be a throwaway and ensure you don't begin recording in earnest until after you hear the first camera shutter sound.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Stuttering Sound at the Beginning of Each Imported Track

I'm using the internal DVD drive on my PowerBook G4 to import songs from CD to my iTunes library (located on my internal hard disk). Often times, the tracks I import will have a half-second stutter at the beginning when I play them back. I'm importing in AAC format at a high bit rate (320 kbps). I've tried this at lower bit rates with no luck. I've also tried using error correction, but that doesn't seem to make a difference.
What's interesting is that this doesn't happen *every time* I import a CD. For example, I recently bought the Beatles stereo remasters and imported four of the disks the other day. No skips, no problems. The next day, I imported four more disks, and *all four* disks had skips on just about every track (except the first track—the first track is always OK).
I thought it might be that I was running too many applications at once, and maybe that's what was interfering with the import process. Restarted the machine and opened up iTunes only—nothing else—but the stuttering problem persisted.
(For the record, I don't think it's a problem with the disks either. I have no problem importing tracks using my iMac.)
Any idea what's causing this or, more importantly, how to stop it from happening?
- Keith

Re-import one of the of the problem CDs in a lossless format, such as AIFF or Apple Lossless. Play a little to verify that the tracks are good. Then use iTunes to convert them to AAC.
Verify that those new tracks are good, and if so, you can then discard the lossless versions and keep the AACs.

Yellow line on the left hand side of my screen iphone 4 after 18 months why has this occured whats the soloution?

I have had my iphone 4 for 18 months on contract..I have had no problems at all up until the begining of this month. The first issue was that the home button, double click issue wasn't working too well. I read that their was a way to calibrate the button which I had done ( please note this does not include opening up the phone) and I noticed that it works much better. However lately I have noticed that I have a yellow tint, line vertical on the left hand side of the screen. It is very faint when I wake my phone but then gets darker and darker.
I have read that people have noticed this on buying their new iphones however mines has just appeared. my contract is up in 6 months so I'm not keen on spending extra on the phone is there anything else I can do?

Try the basics from the manual. Restart, reset, restore.

No Sound at the beginning after rendering (Adobe Media Encorder)

At the beginning like 30 sec. there is always no sound whats the problem?

oh i forgot to say that i have windows xp and my browser is
firefox.

Why r speakers sound like the cracking? noice is terrible

i really don't understand why? why my speaking r making the cracking noice....

Please do a BIOS update and this may fix the issue, if possible do a Audio driver update too.
If you wanna know how to do the same, please go to HP.com- Support & Drivers- Enter product number - Choose OS - Select BIOS - Download and install. Make sure that the Charger is connected to the Computer.

Why does this message appear: The item you've requested is not currently available in the U.S. store. When I open iTunes?

For no discernible reason when I opened iTunes and selected the iTunes Store, this message appeared:
The item you've requested is not currently available in the U.S. store.
rebooted computer. Flushed iTunes cache. I see lots of references to this in older posts (2012 and earlier) but nothing recent.

There are several posts about this in the last 15 minutes
Look around.
Be patient, itunes will correct their issue.

URGENT! I cannot find the beginning of my recording

I recorded an interview under voice and I had to stop the recording at 55 minutes and then start it again about 20 minutes later. I saved it and put my laptop on sleep after the first half. Now I cannot find the very beginning of my interview. All I can see is the second half of my interview which was 31 minutes and the second part of the first half of my interview. Did GB delete it? How do I find the very beginning of my recording?

How do I prevent from recording on top of the first part of my interview? Can I add a new track within the same folder as the first part of my interview and continue to record the interview where I left off and not record over the first track?
That is, what I am doing - I always create a second track for the next take. Then I can give the tracks different names.
Perhaps you had the cycle region enabled? Thenn the recording will begin at the beginneing of the region. Usually the recording should start at the current position of the crosshair.

Why can't I accept the beginning agreement button? unable to use this program without it.

I downloaded the adobe reader X for windows vista but can't get past the agreement page!!!! It won't scroll down to the bottom where the accept button is. How can I use this program if I can't get to the agreement button??????/

See also http://helpx.adobe.com/acrobat/kb/cant-click-accept-acrobat-reader.html

Thinkstation E31 won't boot up, no display, two beep sounds in the beginning

Hello,
I just got my thinkstation E31 SFF today and pretty excited about it.
However, when i pressed the power button, it sounded like everything is turned on (fan sound, etc) then there are two beeps and no display on the monitor.
What is wrong? Can anyone help, please?

without knowing your monitor model, what connections it supports, and if it's set to use the VGA signal as default, this is difficult to debug. i'd suggest calling support at 800-426-7378 and they can help walk you through everything.
eventually you'll want to change the BIOS display output option to use discreet graphics, then connect your monitor to the Q600. this can be done by openening the BIOS setup by pressing the F1 key at boot. the settings can be found in the HMM: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_pdf/e31_hmm.pdf setup instructions start on page 55.

Why's this sound at the beginning of my recording?

Similar Messages

Maybe you are looking for