Why Street prefix and suffix are not provided in ship to address?

Hi Experts,
Anyone have any idea why SAP provided Street prefix and Suffix fields in "BBPADDRINTC (Edit Internal Address)" screen but not in Ship to address screen of shopping cart.
Is there any OSS note which can include these fields into ship to address screen. Please advise.
Regards,
Kamal

Hello Kamal,
Even though the fields Street Prefix / Sufix are available in the address maintenance screen (BBPADDRINTC), they are not available in the procurement documents, like Purchase Orders or Shopping Carts.
The fields STR_SUPPL1 (prefix) and STR_SUPPL3 (suffix) are not implemented in such screens.
According SAP developers, it is not possible to provide a note to change this behavior at this time, since it is part of the design and, making a change, would require changing all other documents and versions.
Kind regards,
Ricardo

Similar Messages

Why Pages, keynotes, and Numbers are not free? I bought my mac Oct 14, 2013

Why Pages, keynotes, and Numbers are not free? I bought my Mac at Oct 14, 2013. With the new OS X Mavericks relaeaed, Apple said that these three Apps are free to new buyers, I bought Macbook Air last week. Why I didn't see these three Apps free after I logged in the Mac App Store?
Please, Help!

***For those that purchased iWork 09 not on the app store but as a retail disk copy you can get the update for iWork even though it may show $19.99 for all the apps:
You can reupdate to iWork 9.3 by going here http://support.apple.com/kb/DL1563
then after it is updated close the app store if opened then open it again and sign out then sign in and then all the iwork 2013 apps should show as update rather than $19.99 cost each. This worked for me. I bought iwork '09 on disk but it showed 19.99 each after I upgraded to Mavericks so followed the above steps and it worked. I am now updating all my iWork suite I bought on disk, NOT on the Mac app store and now I have a Mac app store set!
Apple sure has a problem that needs to be fixed otherwise iWork will eventually be free for everyone...
Someone at Apple forgot all of us old retail people before the Mac App store existed!

Why Pages, keynotes, and Numbers are not free?

Why Pages, keynotes, and Numbers are not free? I bought my Mac at Oct 14, 2013. With the new OS X Mavericks relaeaed, Apple said that these three Apps are free to new buyers, I bought Macbook Air last week. Why I didn't see these three Apps free after I logged in the Mac App Store?
Please, Help!

Don't keep reposting this over and over! Or you posts will be deleted.

Some of my photos from my iPhone are sinking to my iPad and others are not. I can't work out why this is the case. Everything seems to be set up correctly.

Having had an iPhone for some time, I recently purchased an iPad. Everthing has been set up correctly in terms of iCloud, this was checked by Apple today, the set up in iTunes relating to photos says sync all, again I think this is correct.
However, some photos from my iPhone taken before I purchased the iPad are sinking to the iPad and others are not. I have no idea why and would be really greatful for any insights on this matter.
Furthermore, I have since deleted some photos from my iPhone but these still appear on my iPad and I am unable to delete them.
Thanks for your help! It's driving me nuts!
E.

Open itunes, connect iphone, select what you want, sync

Why are some of my songs ghosted and some are not?

Why are some of my songs ghosted and some are not?

Hi smiilee,
Have you tried resetting your phone (hold down the Home and Power buttons a the same time and continue to hold until the Silver Apple appears). Once the Home screen comes back up, see if your Music is OK.
If it is not, then, have you sync'd your phone to an iTunes library on a computer? If so, then hook it up to the computer, uncheck the "Sync Music" option so that no music is sync'd and then sync the phone. This should delete everything on the phone. Then go back and re-check the "Sync Music" option, and select any other criteria you want on that screen, and then sync again. This should put back all of your music.
Let me know if you have any questions,
GB

HT4972 Why Pages and numbers are not updating.

My pages and numbers are not updating for about a week now Why?

Some one else had a similar problem last night...same as yours. He claimed that Pages had been stuck trying to update for about week. I posted this and he said that it worked - which part he did not say - but give these things a try.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>Store>Sign in and then try to resume the download.
If you have all of your Pages files backed up in iTunes or on your Mac, this might be the answer. Try deleting the waiting icon - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
I have deleted Pages a couple of times when I had issues with it and then reinstalled it. I even deleted a stalled Pages once and then tried the update successfully again after that. My files are always backed up in iTunes and on my Mac so I had no apprehension about deleting the waiting download.

Why when I export photos from I photo to the desk top , and then to a CD they end up as alis and some are not really there?

Why when I export photos from I photo to the desk top , and then to a CD they end up as alis and some are not really there?

Why? Because of something you are doing wrong - however unless you actually tell us what you are doing - and what version of iPhoto you have - and any other detail that might help no one can even gess.
Exactly how are you exporting? Are the photos successfully exported to the desktop? How are you moving to the CD? why do you think they are not there?
LN

HT204150 My contacts and groups are not duplicated in iCloud but my groups are duplicated on iPhone and iPad. Any ideas on how to remove duplicate groups or why they are duplicating?

My contacts and groups are not duplicated in iCloud but my groups are duplicated on iPhone and iPad. Any ideas on how to remove duplicate groups or why they are duplicating?

Welcome to the Apple Community.
Check that you don't have more than one account in your contacts, such as 'iCloud' and 'On My Phone'.

My ipad safari and mail are not working. Why are they blank when I clickclick on them?

My ipad safari and mail are not working. Why are they blank when I

For Safari try clearing it's cache : Settings > Safari > Clear Cache (and Clear History).
You could also try closing the two apps completely : from the home screen (i.e. not with Safari or Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail and Safari apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Child DC cannot Replicate to Parent DC, because of connection errors. MS PortQryUI shows that ports 3268 and 3269 are not listening,

I started a support case with Microsoft to help me with raising the our domain Forest level because i received a message stating that there were Windows 2000 PDC still listed in the database. These PDCs were removed years ago. The tech saw all of the problems
i was having with domain replication so that is where he started. running the MS PortQryUI shows that ports 3268 and 3269 are not listening, (TCP port 3268 (unknown service): NOT LISTENING) when run FROM a Child domain controller against the Parent
Domain controller. Between the 2 Child domain controllers these ports are listening.
The Windows firewall is not running on any of the controllers, i removed a virus protect client from all of the servers, although i didn't enable the firewall there either, but these ports are still not listening on the Parent DC.
I need help debugging this. I am not very familiar with network sniffers so if i need to run one i'll need some guidance. This DC only has one NIC, all IP addresses are static, all servers are setup like this. All servers are in the same subnet, on the same
lan, on the same cisco switch, there shouldn't be anything blocking this port from starting.
I looked over other post that show this same problem, but they don't give a solution. If i am not using the Windows firewall why wouldn't these ports be open?
Any ideas? web searches are all over the map on trying to find the reason for this.
Bobby

Try running the below command on the DCs that you think have the ports blocked or all the DCs.
netdiag /test:ipsec /debug > c:\dcname-ipseclog.log
Open that from the C drive and see if there is anything saying block or filters.
Also, just for kicks have you disabled the firewall service on the DCs?
And just for kicks have you tried enabling firewalls ports on all the DCs? The KB is below
http://support.microsoft.com/kb/555381/en-us
Step 1 - netdiag results
Step 2 - disable the firewall service on all DCs if step 1 was negative
Step 3 - enable the firewalls on all DCs per KB 555381 if step 2 doesn't work
Let us know how it goes!
If it answered your question, remember to “Mark as Answer”.
If you found this post helpful, please “Vote as Helpful”.
Postings are provided “AS IS” with no warranties, and confers no rights.
Active Directory: Ultimate Reading Collection

WHAT ARE THE FORMS (SCRIPTS) WHICH ARE NOT PROVIDED BY STANDARD SAP?

WHAT ARE THE FORMS (SCRIPTS) WHICH ARE NOT PROVIDED BY STANDARD SAP?

Hi Pravin
For a beginner in CRM - Sales would be a right choice to understand how CRM behaves when integrated with backend R/3.
Still as far as CRM goes, most of the components are not exposed to their fullest potential and that is why its not outshining the competitors in market.

Subversion error -- server and project are not accessible

I just updated to CS4 for the only reason to be able to use
SVN within the program. I used to use versions, but thought that
not having to switch would be nice.
Whatever I tried, I'm getting the error "server and project
are not accessible." Remember, log in with Versions works smooth as
pie.
I created a new folder to download a new copy from the
repository, uninstalled all previous subversion clients and
reinstalled CS4, only to still get this error!
What to do? Why is Adobe making this so hard without proper
support?

rosiewrose wrote:
> Why is there no live chat or other support that would
help me resolve this??
This is a user-to-user forum. Adobe provides two free
technical support
incidents for standalone products. Details here:
http://www.adobe.com/support/programs/customer/gss.html
> Where can I get my money back, I really don't have time
for things like this.
Contact Adobe customer support.
David Powers
Adobe Community Expert, Dreamweaver
http://foundationphp.com

My user name/email and password are not recognised. I a...

my user name/email and password are not recognised.
I am looking for someonw to tell me why.
preferabley someone to talk to.

Hi there!
For formal (perhaps including live) support, your carrier is your first stop -- they are responsible for all of your formal support.
In the support forums, we can provide you with much user-to-user assistance, but it means that you need to come to the forums and register an account. Please come to:
http://supportforums.blackberry.com/rim/
and register an account. Then post to the applicable forum.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Deduplication: how to identify which files are "in-policy" (and which are not)?

Dear experts,
in eventlog I find the following information for one of my deduplicated volumes:
Volume: F: (\\?\Volume{9794e270-fb08-487e-979b-8a08fa9ca311}\)
Error code: 0x0
Error message:
Savings rate: 24
Saved space: 853327714684
Volume used space: 2681869406208
Volume free space: 66771247104
Optimized file count: 1199618
In-policy file count: 1188049
Job processed space (bytes): 0
Job elapsed time (seconds): 2
Job throughput (MB/second): 0
Some things look strange to me:
- The savings rate is only 24% which looks odd because I get about 40% on other file shares with similar characteristics.
- The "Optimized file count" is higher than the "in-policy" file count.
- The volume has about 3.5 million files but only 1.1 million files are "in-policy".
My understanding of "in-policy" files is that all files are in-policy which are older than 3 days (if not configured different, which is not the case) and which are not contained in an excluded folder (nothing configured here) and which have no
excluded file extension (nothing configured here apart from the default). Right?
I'm sure that only a small fraction of the files on this volume are younger than three days, so something seems to be wrong there, but I have no idea how to find the cause of the problem.
Is there any way to identify the files (full path) which are considered to be not "in-policy"?
How can I find out if the optimization process really looks at all files - and doesn't skip a million?
Thanks!
Regards
Christoph

Mandy, thanks for your feedback! I've read these technet articels, but I couldn't learn something really helpfull related to my problem there. To make investigation of the problem easier I did the following:
- created a brand new empty volume (x:) on the same server
- enabled data deduplication on that volume with a minimal file age of 0 days
- copied about 2GB of data from the problem-volume in 15450 files to this new volume
- started "Start-DedupJob x: -Type Optimization -Memory 50"
After a few seconds that job completed and I got the following result:
Volume: X: (\\?\Volume{d1ba9ed8-28f1-44d1-9535-fe603d6a70c6}\)
Error code: 0x0
Error message:
Savings rate: 0
Saved space: 12360718
Volume used space: 3091664896
Volume free space: 7610097664
Optimized file count: 153
In-policy file count: 153
Job processed space (bytes): 46095214
Job elapsed time (seconds): 9
Job throughput (MB/second): 4.88
The question is: why are only 153 files in-policy?
All files (of more than 15000) are of course "older than 0 days", there are no excluded folders configured, there are no excluded extensions configured, no file has one of the default excluded extensions and more than 1000 files are bigger than 100kB
(minimal size for deduplication is 32kB). So what makes only 153 files qualify for deduplication?
My impression is that there are further undocumented requirements which have to be met by a file to qualify for deduplication. But if there's no detailed log of an optimization run available how to find out what's going on?
(Or is something going wrong on my server?)
Kind Regards
Christoph

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section

Colormunkie Photo printer profile (*.ICM and *.ICC ) are not seen by LR4.2 in the Print Job section
I used Colormunkie Photo to create an .ICM file for printer calibration. When that failed I tried changing the suffix to .ICC. Under neither circumstance did LR4.2 display the file in the menu to select printer profile. There were several display files with both suffixes but no printer files at all. I tried three times with no success and cannot think of what else to try. The first two were the same. I varied the file creation name suffix in the third. Help will be appreciated. My OS is Win 7 ultimate SP1 Printer is HP 2550L laserjet.

Tillman
Glad you found your answer, Colormunki is smart enough to figure out the color space for the printer as I found out - But for quality work the latest generation of inkjet printers from Epson and Canon are hard to beat, and compared to a laserjet the quality is like night and day. The other benefit of changing up to an inkjet printer is the choice of papers available which you could not put through a laserjet.
I had a colleague that tried printing on Photoglossy paper through his color laser and it fried the fuser, and HP, while they replaced the fuser unit under warranty, made it very clear that that was a daft thing to do.
So if I were in your position I would go with an inkjet and you will then enjoy the benefits of better quality output, better paper choices and with your Colormunki be able to make custom profiles that will work in LR
Cheers
Mike

Why Street prefix and suffix are not provided in ship to address?

Similar Messages

Maybe you are looking for