Why the record columns' height are not unify?
I was trying to add boarder lines to a table but it cause a problem.
For exmple, column-A could not show data within a line so it has a height of two line (Vertical Elasticity = expand, horizontal Elasticity has to be fixed), but the column - B next to it does not adjust it own height to make the hold record has the same height..
Any suggestion?
Hello,
A field will expand (if Vertical elasticity allows it) according to its content.
If there are 2 fields , their height may differ.
You should put a frame arounf the fileds and add borders to this frame (vertical elasticity=variable for this frame)
For the "vertical field separator", use a line and set the property "Line Stretch with Frame "
Example is vailable here :
http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwcontxt/props/pi_bp_line_stretch_with_frame.htm
Regards
Similar Messages
-
Why the cells in JTable are not updated?
I have a JTable, and linked a column to an array fo Strings. When the Strings
are updated to new values (by other part of the code), the display did not show
the change. I have to close/reopen the frame OR cover the original frame with
another frame and then move the second frame out to see the change. So how
to let the change show automatically? Thank you.hey rayon whats the problem ..y have u blocked my msgs?? first of all i am not working anywhere and is not going to be fired ...i am just a sec yr student and and i am learning java ..even if this program doesnt gets finished it ll not effect me much.. ill be asking this my teacher after
vacations....
it was u who were being rude n u dun have right to comment whether i am competent or not....n i have posted new questions on other threads because now i want to know anyother way how to update jtable thats it ..
if it is not allowed to post questions in any else's thread then temme i wont do it ..coz i m new to this site...
but u dun have right to write such bad things about me.. -
Why the singles i buy are not in the album when i buy the full album
Everytime I purchase a single weeks berore the release of the full album,
the single is never WITH the album other songs...it's a seperate song. It's really annoyingHere is the backtrace,
[4] scim::__initialize_config(), line 131 in "scim_global_config.cpp"
[5] scim::scim_global_config_read(key = CLASS, defVal = 5000), line 183 in "scim_global_config.cpp"
[6] scim::scim_get_default_socket_timeout(), line 1214 in "scim_socket.cpp"
[7] scim::PanelClient::PanelClientImpl::PanelClientImpl(this = 0x8085318), line 86 in "scim_panel_client.cpp"
[8] scim::PanelClient::PanelClient(this = 0xfbfe9510), line 566 in "scim_panel_client.cpp"
[9] __SLIP.INIT_I(0xfbfe11e8, 0xfbfc33f9, 0x8046e8c, 0xfbfcd807, 0xfeffa7d0, 0xfe660438), at 0xfbfb035f
[10] __STATIC_CONSTRUCTOR(), line 301 in "gtkimcontextscim.cpp"
[11] __cplus_fini_at_exit(0xfbf93760, 0xfe660438, 0xfeffa7d0, 0xfbc10df8, 0xfefd05dc, 0xfbc10df8), at 0xfbfcd807
[12] call_init(0xfbc10df8, 0x3), at 0xfefd380f
[13] is_dep_init(0xfe660438, 0xfbf80490), at 0xfefd357c
[14] elf_bndr(0xfbf80490, 0x2d8, 0xfbe6ccbf), at 0xfefde53c
[15] elf_rtbndr(0x2d8, 0xfbe6ccbf, 0xfbfe9594, 0x0, 0xfbf2f200, 0xfbe6cc79), at 0xfefc8c24
[16] 0xfbf80490(0xfbf2f200, 0xfbe6cda9, 0x8046fcc, 0xfbf0890b, 0xfeffa7d0, 0xfbf80490), at 0xfbf80490
[17] __STATIC_CONSTRUCTOR(), line 42 in "string.cc"
[18] __cplus_fini_at_exit(0xfeffa2d8, 0xfe660438, 0xfeffa7d0, 0xc, 0x8047024, 0xfefd7d91), at 0xfbf0890b
[19] call_init(0xfbc10db0, 0x1), at 0xfefd380f
[20] load_completion(0xfe660438, 0xfec425b0), at 0xfefd3dfa
[21] dlmopen_intn(0xfeffa2d8, 0x8066c40, 0xd01, 0xfec425b0, 0x0, 0x0, 0x80470d0), at 0xfefd7ff0
[22] dlmopen_check(0xfeffa2d8, 0x8066c40, 0xd01, 0xfec425b0, 0x80470d0), at 0xfefd80e0
[23] _dlopen(0x8066c40, 0x101), at 0xfefd81a1
[24] gmodule_open(0x8066c40, 0x1, 0x0), at 0xfc59118a
[25] g_module_open(0x8065008, 0x0), at 0xfc59175c
[26] query_module(0x8064308, 0xfee84042), at 0x805137a
[27] main(0x1, 0x80471f0, 0x80471f8), at 0x8051651 -
Why the html symbols & umlauts are not converted during unmarshalling ?
Iam using JAXB1.6 to convert the below xml to java object.
After unmarshalling when I print the contents for ErrorMsg element, JAXB doesn't do any conversion for & and the character mentioned in ENTITY in the xml. It just prints as such what is in the xml. Where as i need the output as like " Inhalt des Feldes ung� >ig "
Could you please tell that do I need set any property while unmarshalling or do I need to specify any option in xjc compiler while creating JAXB classes?
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Umschlag[<!ENTITY auml "ä"><!ENTITY ouml "ö"><!ENTITY uuml "ü"><!ENTITY Auml "Ä"><!ENTITY Ouml "Ö"><!ENTITY Uuml "Ü"><!ENTITY szlig "ß">]>
<Error version="1.0" >
<ReturnCode>X</ReturnCode>
<Errorcode>X23</Fehlercode>
<ErrorMsg>Inhalt des Feldes ungültig</ErrorMsg>
</Error>
Many Thanks in advanceIam using JAXB1.6 to convert the below xml to java object.
After unmarshalling when I print the contents for ErrorMsg element, JAXB doesn't do any conversion for & and the character mentioned in ENTITY in the xml. It just prints as such what is in the xml. Where as i need the output as like " Inhalt des Feldes ung� >ig "
Could you please tell that do I need set any property while unmarshalling or do I need to specify any option in xjc compiler while creating JAXB classes?
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE Umschlag[<!ENTITY auml "ä"><!ENTITY ouml "ö"><!ENTITY uuml "ü"><!ENTITY Auml "Ä"><!ENTITY Ouml "Ö"><!ENTITY Uuml "Ü"><!ENTITY szlig "ß">]>
<Error version="1.0" >
<ReturnCode>X</ReturnCode>
<Errorcode>X23</Fehlercode>
<ErrorMsg>Inhalt des Feldes ungültig</ErrorMsg>
</Error>
Many Thanks in advance -
In the attached VI I don't understand why data from the inner case structures are not being transmitted to the array.
Thank you.
Solved!
Go to Solution.
Attachments:
TEMP.vi 25 KBIt took me some time to figure what you are trying to do but I think I have it now.
The SR is still required.
What is happening is your "Bundle By Name" is replacing all of the fields of the cluster, not just the value coming out of the case structure. So to maintain the cluster stuff you do in earlier iterations you can either...
1) Put the "Index array, Bundle by name, and Replace array" inside the case structure and ONLY bundle the value you are setting in that iteration. (as you will see Tim post shortly)
OR
2) Move the Index array before the Case, unbundle all of the fields and feed teh case structure and run them across the case so that ALL of your output tunnels come from the coresponding input tunnel EXCEPT for the filed you are trying to set.
Ben
Message Edited by Ben on 05-05-2010 01:31 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Why the ISTORE of Malta is not up to date with the latest movies and series like the UK & USA and why old movies are being uploaded .
I believe the apple should be universal in all the products and a small island like Malts should have the same products for sale on ISTORE like of the UK and USA.The iTunes and App stores are inherently different in different countries. Local laws on copyright and other limits on the distribution of intellectual property make it impossible for Apple to simply put everything in every store. Sometimes, the owner of the intellectual property does not allow it to be distributed everywhere. Keep in mind that Apple does not own the music, books, movies and such that they allow for sale in their store front, so they do not necessarily have any say in what may, or may not appear in what store.
-
Why addcomponent and removecomponent method are not in component class,
Hi,
why addcomponent and removecomponent method are not in component oand component class,
Thank youjava.awt.Container has the appropriate add and remove methods:
http://java.sun.com/javase/6/docs/api/java/awt/Container.html
If that seems odd to you, you need to think about the Composite Pattern:
http://en.wikipedia.org/wiki/Composite_pattern
[url #" style="display: block; background-image: url('http://upload.wikimedia.org/wikipedia/en/1/13/Compositepattern.png'); width: 406px; height: 271px] -
Column Heading are not displayed in ALV Report using CL_SALV_DISPLAY?
Hi,
I am using CL_SALV_DISPLAY class to display data. I Created an Internal Table Dynamically based fieldcatalog which was prepared based data at run time. When i displayed data using CL_SALC_DISPALY data is display in output but column headings are not displayed.
can anyone suggest me how to display heading in ALV using CL_SALV_DISPLAY class, My code is
CLASS lcl_report DEFINITION
CLASS lcl_report DEFINITION.
PUBLIC SECTION.
METHODS:
display IMPORTING l_table TYPE string
l_fcat TYPE string.
ENDCLASS. "lcl_report DEFINITION
CLASS lcl_report IMPLEMENTATION
CLASS lcl_report IMPLEMENTATION.
METHOD display.
DATA: gr_table TYPE REF TO cl_salv_table.
DATA: gr_columns TYPE REF TO cl_salv_columns_table,
gr_column TYPE REF TO cl_salv_column_table,
ls_fcat TYPE slis_fieldcat_alv.
DATA: gr_display TYPE REF TO cl_salv_display_settings.
DATA: l_o_functions TYPE REF TO cl_salv_functions_list,
l_field TYPE string.
FIELD-SYMBOLS : <fs_table> TYPE STANDARD TABLE,
<ft_fcat> TYPE STANDARD TABLE.
Get the ALV object refering to the output table
ASSIGN (l_table) TO <fs_table>.
ASSIGN (l_fcat) TO <ft_fcat>.
TRY.
cl_salv_table=>factory(
IMPORTING
r_salv_table = gr_table
CHANGING
t_table = <fs_table> ).
CATCH cx_salv_msg. "#EC NO_HANDLER
ENDTRY.
Add basic default functionality in the ALV report
Functions
l_o_functions = gr_table->get_functions( ).
l_o_functions->set_all( abap_true ).
gr_columns = gr_table->get_columns( ).
gr_columns->set_headers_visible( abap_true ).
Display the list
gr_table->display( ).
ENDMETHOD. "extract
ENDCLASS. "lcl_report IMPLEMENTATION
*& start-of-selection declaration
START-OF-SELECTION.
PERFORM :
get store codes
get_storecodes USING p_stfile
CHANGING it_t001w,
fetching mard data
read_mard_data,
preparing fieldcatalog for Final Data
create_filedcat USING it_t001w
it_site
CHANGING it_fieldcat,
preparing structure & internal table for Final Data
create_final_table_structure USING it_fieldcat,
prepare output data
prepare_final_data.
*& end-of-selection declaration
END-OF-SELECTION.
PERFORM :
display data
display_data USING l_table
l_fcat.
*& Form get_storecodes
FORM get_storecodes USING p_p_stfile
CHANGING p_it_t001w LIKE it_t001w[].
DATA :
internal table for RAW
lt_raw TYPE truxs_t_text_data,
rs_site LIKE LINE OF rt_site,
l_index LIKE sy-tabix.
FIELD-SYMBOLS :
field symbol for it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w.
calling function module to get Stores Data from File
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
i_line_header = 'X'
i_tab_raw_data = lt_raw
i_filename = p_p_stfile
TABLES
i_tab_converted_data = p_it_t001w[]
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
EXIT.
ENDIF.
SORT p_it_t001w BY werks.
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = p_dccode.
APPEND rs_site TO rt_site.
IF it_t001w[] IS NOT INITIAL.
LOOP AT p_it_t001w ASSIGNING <fs_t001w>.
l_index = sy-tabix.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = <fs_t001w>-werks
IMPORTING
output = <fs_t001w>-werks.
MODIFY p_it_t001w FROM <fs_t001w> INDEX l_index.
IF <fs_t001w>-werks GE s_site-low AND <fs_t001w>-werks LE s_site-high.
append site to ranges
CLEAR rs_site.
rs_site-sign = 'I'.
rs_site-option = 'EQ'.
rs_site-low = <fs_t001w>-werks.
APPEND rs_site TO rt_site.
CONTINUE.
ENDIF.
ENDLOOP.
SORT p_it_t001w BY werks.
SORT rt_site.
ENDIF.
ENDFORM. " get_storecodes
*& Form create_final_table_structure
FORM create_filedcat USING p_it_t001w LIKE it_t001w[]
p_it_site LIKE it_site[]
CHANGING p_it_fieldcat LIKE it_fieldcat[].
FIELD-SYMBOLS :
field symbol for p_it_t001w
<fs_t001w> LIKE LINE OF p_it_t001w,
field symbol for p_it_site
<fs_site> LIKE LINE OF p_it_site.
DATA :
fieldname
l_fieldname TYPE slis_fieldname,
workarea for site ranges
rs_site LIKE LINE OF rt_site.
CLEAR : l_fieldname, rs_site.
l_fieldname = p_dccode.
PERFORM
prepare fieldcatalog
build_fieldcatalog USING : 'MTART' 'CHAR' '5' ,
'MTBEZ' 'CHAR' '25' ,
'MATKL' 'CHAR' '6' ,
'WGBEZ' 'CHAR' '20' ,
'MATNR' 'CHAR' '18' ,
'MAKTX' 'CHAR' '30' ,
l_fieldname 'CHAR' '17' .
create header for excel
PERFORM create_excel_header USING : 'Division',
'Divsion Description',
'MC Code',
'MC Description',
'Article',
'Article Description',
l_fieldname.
loop for creating fieldcatalog
LOOP AT it_site ASSIGNING <fs_site>.
READ TABLE it_t001w ASSIGNING <fs_t001w> WITH KEY werks = <fs_site>-werks
BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t001w> IS ASSIGNED AND
<fs_site> IS ASSIGNED AND <fs_site>-stock GT 0.
CLEAR : l_fieldname, rs_site.
l_fieldname = <fs_site>-werks.
prepare fieldcatalog
PERFORM build_fieldcatalog USING : l_fieldname 'CHAR' '17'.
create header for excel
PERFORM create_excel_header USING l_fieldname .
CONTINUE.
ENDIF.
ENDLOOP.
l_fcat = 'it_fieldcat[]'.
ENDFORM. " create_final_table_structure
*& Form build_fieldcatalog
FORM build_fieldcatalog USING p_fieldname TYPE slis_fieldname
p_datatype TYPE datatype_d
p_length TYPE intlen.
DATA : ls_fieldcat LIKE LINE OF it_fieldcat.
CLEAR : ls_fieldcat.
ls_fieldcat-fieldname = p_fieldname.
ls_fieldcat-datatype = p_datatype.
ls_fieldcat-intlen = p_length.
APPEND ls_fieldcat TO it_fieldcat.
ENDFORM. " build_fieldcatalog
*& Form create_final_table_structure
FORM create_final_table_structure USING p_it_fieldcat.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = t_table.
ASSIGN t_table->* TO <ft_final>.
ENDFORM. " create_final_table_structure
*& Form create_excel_header
FORM create_excel_header USING p_p_fieldname.
DATA : ls_header LIKE LINE OF it_header.
CLEAR ls_header.
ls_header-col_name = p_p_fieldname.
APPEND ls_header TO it_header.
ENDFORM. " create_excel_header
*& Form prepare_final_data
FORM prepare_final_data .
DATA : l_matnr LIKE g_matnr,
l_werks LIKE g_werks,
l_index LIKE sy-tabix.
FIELD-SYMBOLS : <fs_mard> LIKE LINE OF it_mard.
Getting No. of Lines in IT_MARD internal table
DESCRIBE TABLE it_mard LINES g_lines.
LOOP AT it_mard ASSIGNING <fs_mard>.
l_index = sy-tabix.
IF l_matnr IS INITIAL.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSEIF l_matnr <> <fs_mard>-matnr.
APPEND <fs_final> TO <ft_final>.
CLEAR l_matnr.
l_matnr = <fs_mard>-matnr.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
UNASSIGN : <fs_value>, <fs_final>.
Create dynamic work area and assign to FS
CREATE DATA t_line LIKE LINE OF <ft_final>.
ASSIGN t_line->* TO <fs_final>.
ASSIGN COMPONENT 'MATNR' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mard>-matnr.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
getting Article Type,MC & its Descriptions
PERFORM get_other_data USING l_matnr
l_werks.
ELSE.
CLEAR : l_werks.
l_werks = <fs_mard>-werks.
ASSIGN COMPONENT l_werks OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_value> + <fs_mard>-labst.
ENDIF.
IF l_index = g_lines.
APPEND <fs_final> TO <ft_final>.
ENDIF.
ENDLOOP.
l_table = '<ft_final>[]'.
ENDFORM. " prepare_final_data
*& Form get_other_data
FORM get_other_data USING p_l_matnr
p_l_werks.
FIELD-SYMBOLS : <fs_mara> LIKE LINE OF it_mara,
<fs_t023t> LIKE LINE OF it_t023t,
<fs_t134t> LIKE LINE OF it_t134t,
<fs_makt> LIKE LINE OF it_makt.
READ TABLE it_mara ASSIGNING <fs_mara> WITH KEY matnr = p_l_matnr. " BINARY SEARCH.
IF sy-subrc = 0 AND <fs_mara> IS ASSIGNED.
ASSIGN COMPONENT 'MTART' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-mtart.
ASSIGN COMPONENT 'MATKL' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_mara>-matkl.
READ TABLE it_makt ASSIGNING <fs_makt> WITH KEY matnr = <fs_mara>-matnr BINARY SEARCH.
IF sy-subrc = 0 AND <fs_makt> IS ASSIGNED.
ASSIGN COMPONENT 'MAKTX' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_makt>-maktx.
ENDIF.
READ TABLE it_t023t ASSIGNING <fs_t023t> WITH KEY matkl = <fs_mara>-matkl BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t023t> IS ASSIGNED.
ASSIGN COMPONENT 'WGBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t023t>-wgbez.
ENDIF.
READ TABLE it_t134t ASSIGNING <fs_t134t> WITH KEY mtart = <fs_mara>-mtart BINARY SEARCH.
IF sy-subrc = 0 AND <fs_t134t> IS ASSIGNED.
ASSIGN COMPONENT 'MTBEZ' OF STRUCTURE <fs_final> TO <fs_value>.
<fs_value> = <fs_t134t>-mtbez.
ENDIF.
ENDIF.
ENDFORM. " get_other_data
*& Form display_data
text
FORM display_data USING p_l_table
p_l_fcat.
DATA:
Variable for Object Creation
o_report TYPE REF TO lcl_report.
CREATE OBJECT o_report.
o_report->display( EXPORTING l_table = p_l_table
l_fcat = p_l_fcat ).
ENDFORM. " display_dataI don't know how to read the code you pasted or I would have checked this myself.
Do your fields in the internal table reference dictionary objects or elementary types? If not using dictionary types, the column names will be blank by default. If you can't change your fields to be dictionary types, you can try this to change the column names:
I made a method inside my local class to add the names:
call method set_colname
EXPORTING iv_tab = alv_tab
iv_colid = 'xxxx' "fieldname from the table
iv_stxt = text-t54
iv_mtxt = text-t55
iv_ltxt = text-t55.
METHOD set_colname .
data:
alv_cols type REF TO cl_salv_columns_table,
alv_col type REF TO cl_salv_column.
TRY .
*... Change fieldnames
call METHOD iv_tab->get_columns RECEIVING value = alv_cols.
call method alv_cols->get_column EXPORTING columnname = iv_colid RECEIVING value = alv_col.
IF iv_stxt <> ''.
CALL METHOD alv_col->set_short_text EXPORTING value = iv_stxt.
ENDIF.
IF iv_mtxt <> ''.
CALL METHOD alv_col->set_medium_text EXPORTING value = iv_mtxt.
ENDIF.
IF iv_ltxt <> ''.
CALL METHOD alv_col->set_long_text EXPORTING value = iv_ltxt.
ENDIF.
CATCH cx_salv_not_found.
ENDTRY.
ENDMETHOD. "set_colname -
How can i fix a clip when the video and audio are not matching up?
How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.
I would try detaching the audio and the dragging the audio to the left or right until it lines up.
-
Why the basic finish date is not adjusted in planned orders
Hi, all.
Can anybody help me to understand:
"Why the basic finish date is not adjusted in planned orders during
forward scheduling, but in production order basic finish date is adjusted?
It is look like non-coordination between groups of developers.
And lead to situation, when planner don't see in MD04 when he can really wait material receipt. He must go to planed order and check production data there, it's unusable."
Am I right, or SAP have it's own logic.Hi,
Production orders are different story. Since production order is a constant element, they are not created in the course of MRP, basic dates can be adjusted. In production order basic finish date is adjusted, but you won't see for the upper level materials', basic dates of the planned orders adjusted according to the prodcution order you create. Production order is consistent within itself in terms of date and is not dependent to other elements of MRP, but planned orders are not like that.
MRP creates planned orders whose basic finish dates are calculated by subtracting goods receipt time from production start date of the source of requirement. MRP works backwards without changing directions. Meanwhile if any production finish date is calculated different than the basic finish date due to forward scheduling, in order not to violate the alignment between the basic finish date and source of requirement's start date, basic finish date is not adjusted. If it was, dates of all the planned orders calculated so far at the upper levels of the BOMs had to be recalculated, otherwise all the consistency of all the dates is violated. This cannot be done because changes in any level affects all lower levels. -
Why Pages, keynotes, and Numbers are not free? I bought my mac Oct 14, 2013
Why Pages, keynotes, and Numbers are not free? I bought my Mac at Oct 14, 2013. With the new OS X Mavericks relaeaed, Apple said that these three Apps are free to new buyers, I bought Macbook Air last week. Why I didn't see these three Apps free after I logged in the Mac App Store?
Please, Help!***For those that purchased iWork 09 not on the app store but as a retail disk copy you can get the update for iWork even though it may show $19.99 for all the apps:
You can reupdate to iWork 9.3 by going here http://support.apple.com/kb/DL1563
then after it is updated close the app store if opened then open it again and sign out then sign in and then all the iwork 2013 apps should show as update rather than $19.99 cost each. This worked for me. I bought iwork '09 on disk but it showed 19.99 each after I upgraded to Mavericks so followed the above steps and it worked. I am now updating all my iWork suite I bought on disk, NOT on the Mac app store and now I have a Mac app store set!
Apple sure has a problem that needs to be fixed otherwise iWork will eventually be free for everyone...
Someone at Apple forgot all of us old retail people before the Mac App store existed! -
Why Pages, keynotes, and Numbers are not free?
Why Pages, keynotes, and Numbers are not free? I bought my Mac at Oct 14, 2013. With the new OS X Mavericks relaeaed, Apple said that these three Apps are free to new buyers, I bought Macbook Air last week. Why I didn't see these three Apps free after I logged in the Mac App Store?
Please, Help!Don't keep reposting this over and over! Or you posts will be deleted.
-
CreatePDF printer File shows ERROR in the status column and will not upload to my account
When printing to the CreatePDF printer. the file shows ERROR in the status column and will not upload to my account
Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well... -
Why the PO action history is not updating when i perform the vacation rules
Hi,
Can any one explain why the action history is not updating when performed the vacation rules using the below example
Example: A >B>C>D are in the approval hierarchy here I have defined the vacation rules by login to the user C here I selected the item type as “All” and delegated to D.
Now the buyer “A” has sent the document for approval. The user “B” can successfully reserve funds and approved the document. Now the document is automatically delegated to D. Here D can open the document from open notifications and approved the document. Now when I checked the Action history here I cannot find the performed name D who has actually approved the document.
Note:we are using the 11.5.10.2 version.
The Action History in the following manner
Seq Action Performed By
================================
4 Approve C
3 Forward B
2 Reserved B
1 Forward A
0 Submit A
From the above action history why the user D name is not showing. Can any one let me know ASAP?
Regards,
Keivn.
Edited by: user10960960 on May 5, 2009 3:36 AMWhen you set up the vacation rule, if you simply delegate the ownership to D, then C retains the ownership and the approval occurs with C's limits. And hence D is treated as the approver.
If you transfer the ownership, then C is out of the picture. The notification goes to D and when he/she approves, D's limits kick in and he will be seen as approver.
Hope this helps,
Sandeep Gandhi -
Hana view column descriptions are not showing in Crystal 2013
Hello All,
I have a hana calculation view which has the column name and label defined perfectly. When I use the HANA view in Crystal Report 2013, the column labels are not showing up in the field explorer even after enabling the show both name and description. Please help.hi
is anyone has answer for this question.
thanks...!!!!
Maybe you are looking for
-
Hi experts, I am trying to deploy a new version of a WC Portal application and when the deployment finishes successfully I cannot see the web page. The error is: Error 500--Internal Server Error oracle.jbo.NoDefException: JBO-25002: Definition oracle
-
ICal no longer syncing with .Mac between Leopard and previous OS
hi, Two Mac's, both new-ish. When I had the previous OS running on both, my iCal syncing worked great through .Mac. However, I have recently upgraded to Leopard on just one of these machines. Now, the machine with the previous OS will not sync to the
-
FTP Adapter Errors out while translating
Hi, I am using a FTP adapter to put a text file using a bpel process. But the FTP adapter errors out with the following error:oracle/xml/parser/schema/XMLSchema Is there a way to fix this issue?? Please advise. Thanks PS
-
Bug in applying read only security status to a PDF portfolio?
Hi, A quick question about setting up a pdf portfolio as 'read only', so users cannot save amended versions of the document within the portfolio, they can only go to 'save as'. I have set this up, using Adobe Professional 9, using the following pro
-
Hello I wanted to know if using the array method would be the most suitabe for creating a portfolio feature where clicking on thumbnail images would load outside swf's. thanks alot for helping mt