Why won't Index tags that are associated with more than one topic work on a Mac?

I used RoboHelp 8 to generate a project for PCs and Macs. An index entry ("documentation", in the following examples) is associated with two topics. If I click that index entry in the output on a PC, the appropriate topic links appear and I can jump to the topics. On a Mac, any index entry that has more than one topic associated with it will not work. I just wondering if anyone else has experienced this.

I suspect but cannot confirm it is a browser issue with output from an older version of Rh. Can you install the Rh10 trial on a machine other than your normal production machine?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Can my tunes library me associated with more than one iCloud account?

Can my iTunes library be associated with more than one iCloud account?

No, but as mentioned in my answer to your other post, you can share the same iTunes ID with your family and maintain separate iCloud accounts with separate IDs.

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Filter photos that are located in more than one album

I'm trying to organise my iPhoto events onto albums in the new photos app in 10.10.3, however, I think I messed up with a bunch of photos and need to start clean, I need to be sure that one specific photo or group of photos are located in a single album, kinda like iPhoto used to work with events, I know a photo can be in more than one album at a time, but how do you tell with filters?
Tried to create smart album but seems to be no criteria for that.
Thanks.

You can't. You know that during the conversion from iPhoto to Photos all of your current iPhoto Events also were converted to albums inside the folder in the sidebar titled "iPhoto Events".
So you only have to worry about new imports which go into Moments.

Iphone confused - thinks it is associated with more than one apple ID.

iTunes (v11.3) running on OS X.9.4 repeatedly crashes when I try to sync my wife's iPhone 5s (v7.1.2). Sometimes instead of crashing it gives the error message that my computer is no longer associated with my apple ID and to reauthorize it. I reauthorize it and then get the same message again, but it is definitely authorized.
The problem may be with my wife's iPhone? When she first bought it, she synced it to her father's computer / apple ID. We have not been able to sync it to our computer since. In settings > iTunes & app store her phone lists our apple ID, but when you try to update an app in app store it asks to enter the password for her father's apple ID. Have logged out / back in multiple times and still get same result.
I believe the two problems are connected. How to fix it? I would like to be able to sync/backup her phone to our computer.
Thank you

Usually that means you have content, such as apps or media, on the mobile device that was acquired from Apple under a different Apple ID than the one you're using with iTunes. The only way out is to remove that content, or else to sign in to the iTunes Store with the other ID.

Where should I store the collatoral files that are associated with photos stored in lightroom?

Where should I store the collatoral files that are associated with photos stored in lightroom? Items such as pdf files, word documents, etc. How should I connect them to each other so I can find both the photo and the related data?

Lightroom itself will not help you with pdf, word, etc.
However, there is a plugin you can use called AnyFile which will allow you to manage these documents in Lightroom (by assigning keywords and other metadata) so that you can search for all documents (photos, pdf, word, music, powerpoint, etc.) with given metadata.
Because you do this via metadata, it doesn't matter where you put these files. Put them anywhere you want.

SQL query to find all suites that are associated with automation

I trying to incorporate CodeUI tests into a Release Mangement deployment template ... As a developer, I want to be able to specify a sub-tree of a test plan & only execute those test suites that are associated with automation. Is there a way to
extract all automated workitems and associated them with their respective test suites?
Any assistance would be greatly appreciated!

John,
I've partially resolved the issue of executing a sub-set of suites with the following powershell implementation:
1. Extract "potential" suite paths from a XML configuration file:
<?xml version="1.0"?>
<Configurations>
<Properties>
<Property key="DEFAULT" value="SuitePaths" />
<Property key="DatabaseServer" value="MYDBSERVER" />
<Property key="DatabaseInstance" value="Default" />
<Property key="DatabaseName" value="TFS_DefaultCollection" />
<Property key="ConfigurationName" value="US - Windows 7 and IE 10" />
</Properties>
<Notifications>
<Notification key="0" value="[email protected]" />
</Notifications>
<SuitePaths>
<SuitePath key="0" value="MyProject\WebProduct\Student\Features\Login" />
<SuitePath key="1" value="MyProject\WebProduct\Student\Features\Logout" />
</SuitePaths>
<AreaPaths>
<AreaPath key="0" value="MyProject\WebProduct\Student\Features\Login" />
</AreaPaths>
</Configurations>
2. Extract record set of suites from TFS via SQL query:
# FUNCTION: Retrieve-SuitePaths
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) Paths -- Hash table of suite paths
Function Retrieve-SuitePaths
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)]$Paths
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve suite(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$SuitePaths = "("
$Counter = 0
foreach ($Key in $Paths.Keys)
if ($Counter -gt 0)
$SuitePaths = $SuitePaths + ", "
$SuitePaths = $SuitePaths + "'" + $Paths.Get_Item($Key) + "'"
$Counter += 1
$SuitePaths = $SuitePaths + ")"
# --DEBUG ONLY--> Write-Output "Paths: $SuitePaths" | Out-File -FilePath $LogFile -Append
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_SuiteChildren
AS
-- Anchor definition to pull all certify modes
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
CONVERT(NVARCHAR(256), NULL) AS ParentTitle,
S.[Title],
0 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
WHERE
S.ParentSuiteID = 0
UNION ALL
-- Recursive member to pull details of certify sessions
SELECT
S.[SuiteId],
S.[ProjectId],
PJ.ProjectName,
S.[PlanId],
P.[Name] AS PlanName,
S.[ParentSuiteId],
S.[SuitePath],
PS.[Title] AS ParentTitle,
S.[Title],
SC.[RecurseLevel] + 1 AS RecurseLevel
FROM
[dbo].[tbl_Suite] AS S
INNER JOIN cte_SuiteChildren AS SC on SC.SuiteID = S.ParentSuiteID
INNER JOIN [dbo].[tbl_Suite] AS PS ON SC.SuiteId = PS.SuiteId
INNER JOIN [dbo].[tbl_Plan] AS P ON S.PlanID = P.PlanID
INNER JOIN [dbo].[tbl_Project] AS PJ ON S.ProjectID = PJ.ProjectID
cte_SuiteLevel_0
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[ProjectName] + '\' + SC.[PlanName] AS Path,
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 0
cte_SuiteLevel_1
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 1
cte_SuiteLevel_2
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 2
cte_SuiteLevel_3
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 3
cte_SuiteLevel_4
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 4
cte_SuiteLevel_5
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 5
cte_SuiteLevel_6
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 6
cte_SuiteLevel_7
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 7
cte_SuiteLevel_8
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 8
cte_SuiteLevel_9
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 9
cte_SuiteLevel_10
AS
SELECT
SC.[ProjectId],
SC.[PlanId],
SC.[ParentSuiteId],
SC.[SuiteId],
SC.[ProjectName],
SC.[PlanName],
SC.[Title],
SC.[RecurseLevel]
FROM
cte_SuiteChildren AS SC
WHERE
SC.[RecurseLevel] = 10
cte_Suites
AS
SELECT
SL0.[ProjectId],
SL0.[PlanId],
CASE
WHEN SL2.ParentSuiteId IS NULL
THEN SL1.ParentSuiteId
ELSE CASE
WHEN SL3.ParentSuiteId IS NULL
THEN SL2.ParentSuiteId
ELSE CASE
WHEN SL4.ParentSuiteId IS NULL
THEN SL3.ParentSuiteId
ELSE CASE
WHEN SL5.ParentSuiteId IS NULL
THEN SL4.ParentSuiteId
ELSE CASE
WHEN SL6.ParentSuiteId IS NULL
THEN SL5.ParentSuiteId
ELSE CASE
WHEN SL7.ParentSuiteId IS NULL
THEN SL6.ParentSuiteId
ELSE CASE
WHEN SL8.ParentSuiteId IS NULL
THEN SL7.ParentSuiteId
ELSE CASE
WHEN SL9.ParentSuiteId IS NULL
THEN SL8.ParentSuiteId
ELSE CASE
WHEN SL10.ParentSuiteId IS NULL
THEN SL9.ParentSuiteId
ELSE SL10.ParentSuiteId
END
END
END
END
END
END
END
END
END AS [ParentSuiteId],
CASE
WHEN SL2.SuiteId IS NULL
THEN SL1.SuiteId
ELSE CASE
WHEN SL3.SuiteId IS NULL
THEN SL2.SuiteId
ELSE CASE
WHEN SL4.SuiteId IS NULL
THEN SL3.SuiteId
ELSE CASE
WHEN SL5.SuiteId IS NULL
THEN SL4.SuiteId
ELSE CASE
WHEN SL6.SuiteId IS NULL
THEN SL5.SuiteId
ELSE CASE
WHEN SL7.SuiteId IS NULL
THEN SL6.SuiteId
ELSE CASE
WHEN SL8.SuiteId IS NULL
THEN SL7.SuiteId
ELSE CASE
WHEN SL9.SuiteId IS NULL
THEN SL8.SuiteId
ELSE CASE
WHEN SL10.SuiteId IS NULL
THEN SL9.SuiteId
ELSE SL10.SuiteId
END
END
END
END
END
END
END
END
END AS [SuiteId],
SL0.ProjectName,
SL0.PlanName,
--SL0.Path,
--SL1.[Title],
CASE
WHEN SL2.Title IS NULL
THEN SL0.Path + '\' + SL1.Title
ELSE CASE
WHEN SL3.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title
ELSE CASE
WHEN SL4.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title
ELSE CASE
WHEN SL5.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title
ELSE CASE
WHEN SL6.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title
ELSE CASE
WHEN SL7.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title
ELSE CASE
WHEN SL8.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title
ELSE CASE
WHEN SL9.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title
ELSE CASE
WHEN SL10.Title IS NULL
THEN SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title
ELSE SL0.Path + '\' + SL1.Title + '\' + SL2.Title + '\' + SL3.Title + '\' + SL4.Title + '\' + SL5.Title + '\' + SL6.Title + '\' + SL7.Title + '\' + SL8.Title + '\' + SL9.Title + '\' + SL10.Title
END
END
END
END
END
END
END
END
END AS Path,
CASE
WHEN SL2.RecurseLevel IS NULL
THEN SL1.RecurseLevel
ELSE CASE
WHEN SL3.RecurseLevel IS NULL
THEN SL2.RecurseLevel
ELSE CASE
WHEN SL4.RecurseLevel IS NULL
THEN SL3.RecurseLevel
ELSE CASE
WHEN SL5.RecurseLevel IS NULL
THEN SL4.RecurseLevel
ELSE CASE
WHEN SL6.RecurseLevel IS NULL
THEN SL5.RecurseLevel
ELSE CASE
WHEN SL7.RecurseLevel IS NULL
THEN SL6.RecurseLevel
ELSE CASE
WHEN SL8.RecurseLevel IS NULL
THEN SL7.RecurseLevel
ELSE CASE
WHEN SL9.RecurseLevel IS NULL
THEN SL8.RecurseLevel
ELSE CASE
WHEN SL10.RecurseLevel IS NULL
THEN SL9.RecurseLevel
ELSE SL10.RecurseLevel
END
END
END
END
END
END
END
END
END AS RecurseLevel
FROM
cte_SuiteLevel_0 AS SL0
LEFT OUTER JOIN cte_SuiteLevel_1 AS SL1 ON SL1.ParentSuiteId = SL0.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_2 AS SL2 ON SL2.ParentSuiteId = SL1.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_3 AS SL3 ON SL3.ParentSuiteId = SL2.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_4 AS SL4 ON SL4.ParentSuiteId = SL3.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_5 AS SL5 ON SL5.ParentSuiteId = SL4.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_6 AS SL6 ON SL6.ParentSuiteId = SL5.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_7 AS SL7 ON SL7.ParentSuiteId = SL6.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_8 AS SL8 ON SL8.ParentSuiteId = SL7.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_9 AS SL9 ON SL9.ParentSuiteId = SL8.SuiteId
LEFT OUTER JOIN cte_SuiteLevel_10 AS SL10 ON SL10.ParentSuiteId = SL9.SuiteId
SELECT
SS.[ProjectId],
SS.[PlanId],
SS.[ParentSuiteId],
SS.[SuiteId],
SS.[ProjectName],
SS.[PlanName],
SS.[Path],
SS.[RecurseLevel]
FROM
SELECT DISTINCT
S.[ProjectId],
S.[PlanId],
S.[ParentSuiteId],
S.[SuiteId],
S.[ProjectName],
S.[PlanName],
S.[Path],
S.[RecurseLevel]
FROM
cte_Suites AS S
WHERE
S.[RecurseLevel] IS NOT NULL
AND S.[Path] IN $($SuitePaths)
) AS SS
ORDER BY
SS.[Path]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 240
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
3. Execute every suite in the record set via TCM
$DataSet = ( Retrieve-SuitePaths -LogFile:$LogFile -Connection:$Connection -Path:$Paths)
# --DEBUG ONLY--> $DataSet.Tables[0].Rows.Count
# --DEBUG ONLY--> $DataSet.Tables[0]
# Determine whether or not any test suites were retrieved from TFS....
if ( $DataSet.Tables[0].Rows.Count -gt 0 )
$ListTestRunID = $null
$SumFailed = 0
$SumInconclusive = 0
foreach ($Row in $DataSet.Tables[0].Rows)
# Set project, plan & suite variables....
[Int16]$ProjectID = $Row.Item('ProjectId')
[Int16]$PlanID = $Row.Item('PlanId')
[Int16]$ParentSuiteID = $Row.Item('ParentSuiteId')
[Int16]$SuiteID = $Row.Item('SuiteId')
$ProjectName = $Row.Item('ProjectName')
$PlanName = $Row.Item('PlanName')
$Path = $Row.Item('Path')
$RecurseLevel = $Row.Item('RecurseLevel')
# Set local build path variable....
switch -wildcard ($Path)
"*WebCMS*\Administration\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Administration'
"*WebCMS*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Instructor'
"*WebCMS*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebCMS\Student'
"*WebProduct*\Instructor\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Instructor'
"*WebProduct*\Student\*"
$CUITBuildPath = $CUITPathUNC + '\WebProduct\Student'
default
$CUITBuildPath = $CUITPathUNC
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output 'Test Suite:' | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output " ID:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectID" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanID" | Out-File -FilePath $LogFile -Append
Write-Output " Parent Suite: $ParentSuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $SuiteID" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationID" | Out-File -FilePath $LogFile -Append
Write-Output " Name:" | Out-File -FilePath $LogFile -Append
Write-Output " Project: $ProjectName" | Out-File -FilePath $LogFile -Append
Write-Output " Plan: $PlanName" | Out-File -FilePath $LogFile -Append
Write-Output " Config: $ConfigurationName" | Out-File -FilePath $LogFile -Append
Write-Output " Path:" | Out-File -FilePath $LogFile -Append
Write-Output " Suite: $Path" | Out-File -FilePath $LogFile -Append
Write-Output " Build: $CUITBuildPath" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> Write-Output " Recursion: $RecurseLevel" | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
# Set TCM arguements....
$ArguementPlanID = "/planid:$PlanID"
$ArguementTitle = "/title:$Title - $Path (SuiteID: $SuiteID)"
$ArguementSuiteID = "/suiteid:$SuiteID"
$ArguementConfigurationID = "/configid:$ConfigurationID"
$ArguementTFSCollection = "/collection:$TFSCollection"
$ArguementTeamProject = "/teamproject:$TFSTeamProject"
if(![string]::IsNullOrEmpty($CUITBuildPath))
$ArguementBuildDirectory = "/builddir:$CUITBuildPath"
$ArguementBuild = ""
$ArguementBuildDefinition = ""
else
$ArguementBuildDirectory = ""
$ArguementBuild = "/build:$TFSBuild"
$ArguementBuildDefinition = "/builddefinition:$BuildDefinition"
$ArguementTestEnvironment = "/testenvironment:$WebServer"
$ArguementSettingsName = ""
if(![string]::IsNullOrEmpty($SettingsName))
$ArguementSettingsName = "/settingsname:$SettingsName"
# Create test run....
Write-Host "$TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName"
Write-Output " $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTFSCollection $ArguementTeamProject $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName" | Out-File -FilePath $LogFile -Append
try
$TestRunID = & $TCMEXE 'run' '/create' $ArguementTitle $ArguementPlanID $ArguementSuiteID $ArguementConfigurationID $ArguementTeamProject $ArguementTFSCollection $ArguementBuild $ArguementBuildDefinition $ArguementBuildDirectory $ArguementTestEnvironment $ArguementSettingsName
catch
$ExitMessage = $_Exception.Message
# --DEBUG ONLY--> Write-Output "TestRunID: $TestRunID" | Out-File -FilePath $LogFile -Append
if ($TestRunID -match '.+\:\s(?<TestRunID>\d+)\.')
# The test run ID is identified as a property in the match collection so we can access it directly by using the group name from the regular expression (i.e. TestRunID).
$TestRunID = $matches.TestRunID
$ArguementID = "/id:$TestRunID"
$TestRunResultsFile = $TempDirectory + "\TestRunResults$TestRunID.trx"
$ArguementQueryText = "/querytext:SELECT * FROM TestRun WHERE TestRunID=$TestRunID"
$ArguementResultsFile = "/resultsfile:""$TestRunResultsFile"""
Write-Host " Waiting for test run to complete ..."
Write-Host $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
Write-Output " $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunCompletion = $true
$WaitCount= 0
while ($WaitingForTestRunCompletion)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
Start-Sleep -s $TestRunWaitDelay
$TestRunStatus = & $TCMEXE 'run' '/list' $ArguementTeamProject $ArguementTFSCollection $ArguementQueryText
$TestRunStatus
if ($TestRunStatus.Count -lt 3 -or ($TestRunStatus.Count -gt 2 -and $TestRunStatus.GetValue(2) -match '.+(?<DateCompleted>\d+[/]\d+[/]\d+)'))
$WaitingForTestRunCompletion = $false
Write-Host "Evaluating test run $TestRunID results..."
# Take small pause(s) since the results might not be published yet....
Start-Sleep -s $TestRunWaitDelay
# Export results....
Write-Host $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile
Write-Output " $TCMEXE 'run' '/export' $ArguementID $ArguementTeamProject $ArguementTFSCollection $ArguementResultsFile" | Out-File -FilePath $LogFile -Append
$WaitingForTestRunExport = $true
$WaitCount= 0
while ($WaitingForTestRunExport -and $WaitCount -lt 5)
$WaitCount = $WaitCount + 1
Write-Output " Waiting ($WaitCount)...." | Out-File -FilePath $LogFile -Append
$ExportResult = & $TCMEXE 'run' '/export' $ArguementID $ArguementResultsFile $ArguementTFSCollection $ArguementTeamProject
if ([System.IO.File]::Exists($TestRunResultsFile))
$WaitingForTestRunExport = $false
if ([System.IO.File]::Exists($TestRunResultsFile))
# Load the XML document contents.
[xml]$TestResultsXML = Get-Content "$TestRunResultsFile"
# Extract the results of the test run.
$TotalTests = $TestResultsXML.TestRun.ResultSummary.Counters.total
$PassedTests = $TestResultsXML.TestRun.ResultSummary.Counters.passed
$FailedTests = $TestResultsXML.TestRun.ResultSummary.Counters.failed
$InconclusiveTests = $TestResultsXML.TestRun.ResultSummary.Counters.inconclusive
# Output the results of the test run.
Write-Host "========== Test: $TotalTests tests ran, $PassedTests succeeded, $FailedTests failed, $InconclusiveTests inconclusive =========="
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output "Summary:" | Out-File -FilePath $LogFile -Append
Write-Output "--------------------------------------------------------------------------------" | Out-File -FilePath $LogFile -Append
Write-Output " Total: $TotalTests" | Out-File -FilePath $LogFile -Append
Write-Output " Passed: $PassedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Failed: $FailedTests" | Out-File -FilePath $LogFile -Append
Write-Output " Inconclusive: $InconclusiveTests" | Out-File -FilePath $LogFile -Append
$SumFailed += $FailedTests
$SumInconclusive += $InconclusiveTests
# Remove the test run results file.
[System.IO.File]::Delete($TestRunResultsFile) | Out-Null
# Add "current" TestRunID to the list of TestRunID(s)....
if ($ListTestRunID -ne $null)
$ListTestRunID = $ListTestRunID + ', '
$ListTestRunID = $ListTestRunID + $TestRunID
# Next test suite....
4. Extract record set of test runs from TFS via SQL query:
# FUNCTION: Retrieve-TestRuns
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRuns
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test run(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_State
AS
SELECT 0 AS [StateID], 'Unspecified' AS [StateName]
UNION ALL
SELECT 1 AS [OutcomeId], 'To Be Determined (1)' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'Aborted' AS [StateName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [StateName]
UNION ALL
SELECT 6 AS [StateID], 'Needs Investigation' AS [StateName]
SELECT
TR.[ProjectId] AS [Project Id],
P.[ProjectName],
TR.[TestPlanId] AS [Plan Id],
TP.Name AS [TestPlanName],
TR.[TestRunId] AS [Run Id],
TR.[Title],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[StartDate] AS [Date Started],
TR.[CompleteDate] AS [Date Completed],
DATEDIFF(SECOND, TR.[StartDate], TR.[CompleteDate]) AS Duration,
TR.[Type],
TR.[IsAutomated],
TR.[TotalTests] AS [Total],
TR.[PassedTests] AS [Passed],
TR.[IncompleteTests] AS [Incomplete],
TR.[UnanalyzedTests] AS [Unanalyzed],
TR.[NotApplicableTests] AS [Not Applicable]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestRun] AS TR
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Project] AS P ON TR.ProjectId = P.ProjectId
INNER JOIN [Tfs_DefaultCollection].[dbo].[tbl_Plan] AS TP ON TR.TestPlanId = TP.PlanId
INNER JOIN cte_State AS S ON TR.[State] = S.[StateID]
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[StartDate]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
5. Extract record set of test results from TFS via SQL query:
# FUNCTION: Retrieve-TestRunResults
# Parameters:
# (1.) LogFile -- Name of log file (e.g., C:\Temp or C:\Temp\DEPLOY_DatabaseServer_WebCMS2_DF06_20131031.6.log)
# (2.) Connection -- Database connection
# (3.) ListTestRunID -- List of test run identifiers
Function Retrieve-TestRunResults
param
[Parameter(Mandatory=$True)][String]$LogFile,
[Parameter(Mandatory=$True)]$Connection,
[Parameter(Mandatory=$True)][String]$ListTestRunID
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "Retrieve test result(s): " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
$TestRuns = '(' + $ListTestRunID + ')'
$Command = New-Object System.Data.SqlClient.SqlCommand
$SQLStatement = "
WITH
cte_Outcome
AS
SELECT 0 AS [OutcomeId], 'To Be Determined (0)' AS [OutcomeName]
UNION ALL
SELECT 1 AS [OutcomeId], 'In Progress' AS [OutcomeName]
UNION ALL
SELECT 2 AS [OutcomeId], 'Passed' AS [OutcomeName]
UNION ALL
SELECT 3 AS [OutcomeId], 'Failed' AS [OutcomeName]
UNION ALL
SELECT 4 AS [OutcomeId], 'Inconclusive' AS [OutcomeName]
UNION ALL
SELECT 5 AS [OutcomeId], 'To Be Determined (5)' AS [OutcomeName]
UNION ALL
SELECT 6 AS [OutcomeId], 'Aborted' AS [OutcomeName]
UNION ALL
SELECT 7 AS [OutcomeId], 'Blocked' AS [OutcomeName]
UNION ALL
SELECT 8 AS [OutcomeId], 'Not Executed' AS [OutcomeName]
UNION ALL
SELECT 10 AS [OutcomeId], 'Error' AS [OutcomeName]
UNION ALL
SELECT 11 AS [OutcomeId], 'Not Applicable' AS [OutcomeName]
UNION ALL
SELECT 12 AS [OutcomeId], 'Paused' AS [OutcomeName]
UNION ALL
SELECT 13 AS [OutcomeId], 'To Be Determined (13)' AS [OutcomeName]
UNION ALL
SELECT 255 AS [OutcomeId], 'Never Run' AS [OutcomeName]
cte_State
AS
SELECT 0 AS [StateID], 'None' AS [StateName]
UNION ALL
SELECT 1 AS [StateID], 'Ready' AS [StateName]
UNION ALL
SELECT 2 AS [StateID], 'Completed' AS [StateName]
UNION ALL
SELECT 3 AS [StateID], 'Not Ready' AS [StateName]
UNION ALL
SELECT 4 AS [StateID], 'In Progress' AS [StateName]
UNION ALL
SELECT 5 AS [StateID], 'To Be Determined' AS [StateName]
SELECT DISTINCT
TR.[TestRunId] AS [Run Id],
TR.[TestCaseId] AS [Case Id],
O.[OutcomeID] AS [Outcome Id],
O.[OutcomeName] AS [Outcome],
S.[StateID] AS [State Id],
S.[StateName] AS [State],
TR.[TestCaseTitle] AS [Title],
TR.[AutomatedTestName] AS [Automation Method],
TR.[DateStarted] AS [Date Started],
TR.[DateCompleted] AS [Date Completed],
DATEDIFF(SECOND, TR.[DateStarted], TR.[DateCompleted]) AS Duration,
TR.[FailureType] AS [Failure Type],
TR.[ErrorMessage] AS [Error]
FROM
[Tfs_DefaultCollection].[dbo].[tbl_TestResult] AS TR
INNER JOIN cte_Outcome AS O ON TR.Outcome = O.OutcomeID
INNER JOIN cte_State AS S ON TR.State = S.StateID
WHERE
TR.TestRunId IN $($TestRuns)
ORDER BY
TR.[TestRunId],
O.[OutcomeName],
TR.[TestCaseTitle]
$Command.CommandText = $SQLStatement
$Command.Connection = $Connection
$Command.CommandTimeout = 30
$DataAdapter = New-Object System.Data.SqlClient.SqlDataAdapter
$DataAdapter.SelectCommand = $Command
$DataSet = New-Object System.Data.DataSet
$DataAdapter.Fill($DataSet) | Out-Null
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "SQL Statement: " | Out-File -FilePath $LogFile -Append
Write-Output '--------------------------------------------------------------------------------' | Out-File -FilePath $LogFile -Append
Write-Output "$SQLStatement" | Out-File -FilePath $LogFile -Append
# --DEBUG ONLY--> $DataSet.Tables[0]
return $DataSet
6. Email results to distribution list
Currently, I'm simplifying the extraction of suite path ... replacing hardcoded depth with STUFF() & XML PATH
Carl.

Why is all my icloud account linked with more than one apple id?

why is my iphone 5 merged with more than one account?

What do you mean by "merged with more than one account" and "linked with more than one Apple ID"? What exactly are you seeing on your phone?

Apple won't let me sync with more than one computer

How crazy is it that Apple will not let you sync with more than one computer! I have three computers! One in the kitchen one in my room and one at my parents house. These are all my computers, but if I try to sync my iphone5! with my computer at my parents house itunes says it will erase all my data! I have legally purchased all my music, so I have bought the rights! which means I can have the same songs on mutiply computers.
I've seen posts like this before, so I know Im not the only one who knows that this is unexceptable! Apple knows too! So heres how we gonna do this, **** itunes and **** apple, they can suck it! I'm sick of Apple and how they try to control everything you do, with their limited youtube video capacity because they "dont allow flash".
All Apple care about is taking your money, otherwise they would listen to what their customers are saying. These posts are on an apple site after all.
Thats my opinion, vote this up if you feel the same way.
Thanks

I understand what you mean. If you would have a little more technical background to what is happening when you sync and iOS device, you would understand that the reason for syncing with only one computer is not to control you but is rather to manage the syncing.
For exemple, how would you manage to backup a device on multiple computer while some songs or apps are on your iOS device but not on the computer? Copying them back to the computer would only result in what you don't want, keeping different iTunes library on different computer.
The very best solutions for you is either;
Make one of your iTunes library the master with ALL your media files and use this one for syncing your device. You can easily manage all your music using automated playlist (like one for all the music with an older date you would decide).
Pay for iTunes match and ALL your song (even those you haven't bought from iTunes) to be available in the cloud for you to stream directly to your iPhone. This however have a monthly fee.
I agree that on one thing Apple is controlling; it's by not allowing you to extract songs from an iPod. Giving home sharing now, that would solely restrict you from illegally copying music to others. But again, you must understand that this limitation isn't to be powerfreak, it have been required to secure the music industries and make iTunes Store possible in the first place.
And make shure you active Home Sharing as it will give you full access (stream and copy over wi-fi from any computer and iOS devices) in between your iTunes libraries.

Spatial index creation for table with more than one geometry columns?

I have table with more than one geometry columns.
I'v added in user_sdo_geom_metadata table record for every column in the table.
When I try to create spatial indexes over geometry columns in the table - i get error message:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 8
ORA-06512: at line 1
What is the the solution?

I'v got errors in my user_sdo_geom_metadata.
The problem does not exists!

I want to run a streaming quotes program on Scottrade. They tell me that their product does not work if I have more than one Java application on my Mac. How do I delete the older versions? Thanks

I want to run a streaming quotes program on Scottrade. They tell me that their product does not work if I have more than one Java application on my Mac. How do I delete the older versions? Thanks

I have the same problem, they never told me that, just that the newest version of Java "locks" up streaming quotes.

IAC 3.1.1 users who are member of more than one OrgUnit are not able to order services?

Hi,
Power Down, Power Cycle, Take Snapshot and Decommission services are not working for users who are member of more than one organization!!
Error Message:
The service form could not be submitted because of following error: [newscale][SQLServer JDBC Driver][SQLServer]Conversion failed when converting the nvarchar value '1,2' to data type int.
Thanks,
Maz

Hi,
Power Down, Power Cycle, Take Snapshot and Decommission services are not working for users who are member of more than one organization!!
Error Message:
The service form could not be submitted because of following error: [newscale][SQLServer JDBC Driver][SQLServer]Conversion failed when converting the nvarchar value '1,2' to data type int.
Thanks,
Maz

Why can't owa_text.vc_arr handle the string with more than 4000 characters?

I am using PL_SQL with Oracle8i and OAS 4.0 web server.I want to
use owa_text.vc_arr to pass the inputs in serval text areas in the form on a web application.
If the input string length is less than 4000 characters, everything works fine.However when the strings are longer than 4000 characters but less than the max length 32767 characters, I got this error message:
OWS-05101: Execution failed due to Oracle error 2005
ORA-02005: implicit (-1) length not valid for this bind or define datatype.
In the Oracle Application Server 4.0 documment, it says
about owa_text.vc_arr :Type vc_arr is table of varchar2(32767)
index by binary_integer. It means that owa_text.vc_arr can handle multiple strings and each string can have up to 32767 single byte characters, is it right?
Owa_text.vc_arr is supposed to handle the string with more
than 4000 characters, is it true? Could anyone tell me why? Any
help will be greatly appreciated!!!
Thanks very much.
Helena Wang
Here is the pl_sql procedure to create my form on the web:
PROCEDURE myform
IS
BEGIN
htp.p('
<form action="'||service_path||'helena_test.saveform3"
method=post>
<input type=hidden name=tdescription value="X">
Input1: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
Input2: <textarea name=tdescription rows=50 cols=70
WRAP=physical></textarea>
<input type=submit name=WSave value="Save">
</form>
END;
/***** here is the pl_sql procedure which I use to save the
form***/
procedure saveform3(tdescription in owa_text.vc_arr,
WSave in varchar2 default 'No')
is
len pls_integer;
begin
for i in 2..tdescription.count loop
len := length(tdescription(i));
htp.p(len);
htp.p(tdescription(i));
end loop;
end;

The maximum size of a VARCHAR2 field in Oracle 8i is 4000 bytes.
you'll ned to use a LOB type (or LONG if you prefer the old way)

Why does Boot Camp Assistant already think I have more than one partition on my hard drive?

Greetings...
I'm surprised I've found no remedy for this problem in my searches so far. My symptom is that when I run the Boot Camp Assistant app, I get the following error message:
"The startup disk cannot be partitioned or restored to a single partition." The instructions that are provided along with the error message are: "Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
When I try to follow the instructions, I see that Disk Utility shows my drive as having a single partition. Nevertheless, I've backed up my Macintosh HD volume, re-artitioned the drive into a single Mac OS Extended (Journaled) volume (once using the Snow Leopard Installation disk and once using Drive Genius 3), and restored my Macintosh HD volume. After all that, I still get the same error message. I even defragged my hard drive, which seems to have helped some users I've read about, but it hasn't helped me.
Something worth noting is that I recently upgraded to a bigger internal hard drive, and before doing so, I deleted the Boot Camp volume. I innocently thought I'd just do a fresh install sometime after replacing the hard drive, but hindsight tells me that I might have fallen victim to my own ignorance.
Is there a value stored in a register somewhere that's telling my OS that I have more than one partition when I really don't? Can someone out there help me do battle against my ignorance?
I'd be grateful for any help that can be sent my way...

I used DG3 to initialize the HD, which essentially erases the disk if I understand correctly. I haven't used Superduper before, so perhaps that's worth looking into.
I did mentioned the use of DG3 to ensure that I had a single disk partition. I guess the restore from a clone or Time Machine was implied...
;o)
Thanks for putting some effort into helping me. I'll look at Superduper and let you know if that gets me anywhere...

Why can't I send a text message to more than one contact?

With all my previous cell phones I was able to send a single text message to more than one contact. With the iPhone I can only send to one contact and then I have to type the text message again and send to another contact, and so on. Or am I messing a fuction on the iPhone that allows for sending a text message to more than one contact?

No, you are not missing it. That feature is not available on the iPhone.

Why won't Index tags that are associated with more than one topic work on a Mac?

Similar Messages

Maybe you are looking for