Wicd: "Connection failed: Unable to get IP Address"

Hi,
Wicd has suddenly stopped working for me. The only recent change I can think of is updating virtualbox_bin (from AUR). I can successfully connect to my wireless network from an Ubuntu 10.04 machine, so the problem is on my Arch laptop. Here's my /var/log/everything.log from a fresh boot immediately followed by an attempt to connect to my wireless network:
Sep 13 23:35:18 archtop polkitd[2252]: started daemon version 0.96 using authority implementation `local' version `0.96'
Sep 13 23:35:18 archtop pulseaudio[2244]: module-alsa-card.c: Failed to find a working profile.
Sep 13 23:35:18 archtop pulseaudio[2244]: module.c: Failed to load module "module-alsa-card" (argument: "device_id="29" name="platform-thinkpad_acpi" card_name="alsa_card.platform-thinkpad_acpi" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""): initialization failed.
Sep 13 23:35:19 archtop kernel: fuse init (API version 7.14)
Sep 13 23:35:30 archtop dhcpcd[2627]: dhcpcd not running
Sep 13 23:35:30 archtop kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 13 23:35:30 archtop dhcpcd[2650]: dhcpcd not running
Sep 13 23:35:31 archtop kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Sep 13 23:35:31 archtop kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Sep 13 23:35:31 archtop kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 13 23:35:31 archtop dhcpcd[2678]: dhcpcd not running
Sep 13 23:35:31 archtop kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 13 23:35:36 archtop kernel: wlan0: authenticate with ${MAC_ADDRESS} (try 1)
Sep 13 23:35:36 archtop kernel: wlan0: authenticated
Sep 13 23:35:36 archtop kernel: wlan0: associate with ${MAC_ADDRESS} (try 1)
Sep 13 23:35:36 archtop kernel: wlan0: RX AssocResp from ${MAC_ADDRESS} (capab=0x431 status=0 aid=3)
Sep 13 23:35:36 archtop kernel: wlan0: associated
Sep 13 23:35:36 archtop kernel: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Sep 13 23:35:36 archtop kernel: cfg80211: Calling CRDA for country: US
Sep 13 23:35:36 archtop kernel: Intel AES-NI instructions are not detected.
Sep 13 23:35:36 archtop kernel: padlock: VIA PadLock not detected.
Sep 13 23:35:36 archtop kernel: /dev/vmnet: open called by PID 2103 (vmnet-bridge)
Sep 13 23:35:36 archtop kernel: /dev/vmnet: hub 0 does not exist, allocating memory.
Sep 13 23:35:36 archtop kernel: /dev/vmnet: port on hub 0 successfully opened
Sep 13 23:35:36 archtop kernel: bridge-wlan0: up
Sep 13 23:35:36 archtop vmnetBridge: Adding interface wlan0 index:4
Sep 13 23:35:36 archtop vmnetBridge: Started bridge wlan0 to virtual network 0.
Sep 13 23:35:36 archtop kernel: bridge-wlan0: attached
Sep 13 23:35:37 archtop dhcpcd[3483]: version 5.2.7 starting
Sep 13 23:35:37 archtop dhcpcd[3483]: wlan0: broadcasting for a lease
Sep 13 23:35:47 archtop kernel: wlan0: no IPv6 routers present
Sep 13 23:36:07 archtop dhcpcd[3483]: timed out
Sep 13 23:36:07 archtop dhcpcd[3648]: dhcpcd not running
Sep 13 23:36:07 archtop kernel: wlan0: deauthenticating from ${MAC_ADDRESS} by local choice (reason=3)
Sep 13 23:36:07 archtop vmnetBridge: Removing interface wlan0 index:4
Sep 13 23:36:07 archtop kernel: bridge-wlan0: disabling the bridge on dev down
Sep 13 23:36:07 archtop kernel: bridge-wlan0: down
Sep 13 23:36:07 archtop kernel: cfg80211: Calling CRDA to update world regulatory domain
Sep 13 23:36:07 archtop kernel: bridge-wlan0: detached
Sep 13 23:36:07 archtop kernel: /dev/vmnet: open called by PID 2103 (vmnet-bridge)
Sep 13 23:36:07 archtop kernel: /dev/vmnet: hub 0 does not exist, allocating memory.
Sep 13 23:36:07 archtop kernel: /dev/vmnet: port on hub 0 successfully opened
Sep 13 23:36:07 archtop kernel: bridge-wlan0: attached
Sep 13 23:36:07 archtop vmnetBridge: Stopped bridge wlan0 to virtual network 0.
Sep 13 23:36:07 archtop vmnetBridge: Adding interface wlan0 index:4
Sep 13 23:36:07 archtop vmnetBridge: Started bridge wlan0 to virtual network 0.
Sep 13 23:36:07 archtop vmnetBridge: Removing interface wlan0 index:4
Sep 13 23:36:07 archtop kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Sep 13 23:36:07 archtop kernel: bridge-wlan0: enabling the bridge on dev up
Sep 13 23:36:07 archtop kernel: bridge-wlan0: up
Sep 13 23:36:07 archtop kernel: bridge-wlan0: disabling the bridge
Sep 13 23:36:07 archtop dhcpcd[3657]: dhcpcd not running
Sep 13 23:36:07 archtop kernel: bridge-wlan0: down
Sep 13 23:36:07 archtop kernel: bridge-wlan0: detached
Sep 13 23:36:07 archtop vmnetBridge: Stopped bridge wlan0 to virtual network 0.
Sep 13 23:36:08 archtop kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Sep 13 23:36:08 archtop kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Sep 13 23:36:08 archtop kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Any ideas?
Thanks!
Last edited by w1ntermute (2010-09-14 04:47:21)

ewaller wrote:Is it possible you have constructed a bridge interface (TAP) and then added one of the VmWare virtual interfaces and wlan0 to that bridge?
I haven't manually set up any interfaces, that's for sure. In VirtualBox my network adapter is set to "Attached to: NAT", not "Attached to: Bridged Adapter".
Did you intend to set up a bridge? I find that NAT works much better (unless you need to use the virtual machine as a network server)
No, I didn't intend to set up anything. I just want wireless and wired to work on my laptop and on my virtual machine, and I want to be able to access shared folders from my host OS in my Windows XP guest OS (which happens via the network sharing functionality in Windows).
Also, today I tried connecting to another wireless network, and I was successful, so maybe it's something about the way that my home wireless settings are configured. I tried rebooting several times yesterday when I couldn't connect at home, so I don't think it was something fixed by me rebooting before I tried connecting to the other wireless network. I'll try again to connect to my home network in a bit, just in case it was.
Last edited by w1ntermute (2010-09-14 23:50:51)

Similar Messages

AnyConnect - Posture Assessment Failed: Unable to get the available CSD version....

Hello all
I am attempting to get the HostScan posture assessment working so we can check that any device connecting to the ASA is a valid corporate asset.
I have installed the posture module onto our test client machine (Windows 8.1) using the following software:
anyconnect-posture-win-4.0.00061-pre-deploy-k9
Then in ASDM under Remote Access VPN > Host Scan Image I have uploaded the following package:
disk0:/hostscan_3.1.06073-k9.pkg
...and ticked the box 'Enable Host Scan/CSD'.
Under Remote Access VPN > Secure Desktop Manager I have configured an initial simple Prelogin policy to test it working, this simply just checks that the OS is Windows 8. A success should map this user to a Group Policy I have created that is mapped to a Connection Profile.
So, with all that said, when I try to connect I see that the AnyConnect client going through the motions: "Posture Assessment: Checking for updates....", after which I get a pop-up and error message:
"Posture Assessment Failed: Unable to get the available CSD version from the secure gateway"
A bit stumped here and haven't quite found much on the web as to how to resolve this.
Has anyone encountered this before? If so, can you advise on what I can do
By the way I am connecting using IKEv2 (IPsec) as these are the requirements and the AC version is 4.0.00061, ASA version: 9.2(1).
Many thanks

Hello
Please forgive the shameless bump. Was hoping someone could help?
Many thanks

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I have a new iPad wi-fi lte 16gb.when I try to sync thru I tunes it keeps on accessing I tunes stores.i have windows xp service pack 3.after running diagnostics it showed iTunes secure connection failed.unable to sync completely even once. Plz help.thanks

I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Unable to get BP address in to PO Bill to abd ship to

Hi All,
I have exported data of BP and the address using DTW.
When i am raising PO. i am unable to get the address in ship to & bill to fields on Logistics tab.
am i missing any thing.
Thanks
Mahi.

Hi Mahendra,
In the logistics tab if you select bill to and **** to drop down, you will get the addresses defined in the master.
and they will get pulled in PO screen.
some times it happens that they do not get pulled into the transaction screens.
Are you experiencing this in every transaction screen ?
Try setting default address.
thanks
Malhaar

[nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.

Hi Experts,
When I use Agent functionality to send email in BIEE 11.1.1.7.0, it will generate the following error message as below: Are you facing the same problem ? Please help me,Thanks very much.
Global Error: [nQSError: 77030] Oracle BI Presentation Server Connection Error: Unable to resolve the address for cn.
Error Codes: AXSBMN8D:
The operation completed successfully.

Can you try doing telnet to SMTP server from where BI server is installed and let us know the outcome.Just want to check if any firewall is blocking
telnet hostname portnumber
Thanks,

Airport Express connecting to xbox360 unable to get IP address

I am hoping someone can assist with this. Currently I have my Comcast Cable going to a uplink port on a NetGear Hub and then from the Hub i have hardwire connections going to the AE and the Xbox.
All computers on this setup get an IP fine but the Xbox cannot. It seems to be a problem the Share a Single IP address (using DHCP and NAT) setting as the Xbox does not like sharing. I have attempted to change this to Share a range of IP addresses (using only DHCP), but when I try to update this it states I require a Static IP address and removes all dynamically assigned addresses from the ISP under the Internet Tab in the Admin Utility.
If someone can please let me know where I am going wrong it would be appreciated.

Curtly, Welcome to the discussion area!
Is the Netgear device truly a 'hub' or is it a 'router'? If it is a hub you need to replace it with a router. Comcast is giving you a single IP address and your AirPort Express (AX) is getting that address. Therefore your Xbox has no connection.
The AX can not share a connection to hardware clients. Therefore the AX can not provide the Xbox with an IP address.

Unable to get IP address from DHCP since upgrading

Hi all,
I upgraded my machine to Mountain Lion last night. Ever since then I have been unable to get any IP information using DHCP. Each time I hit Renew Lease within the Network control panel I just get back a self assigned IP address. If I look in the system logs I see the following generated each time my machine tries to look for the DHCP server:
Jul 26 01:32:27 Lightning.local configd[22]: bootp_session: bind port 68 failed, No route to host
Jul 26 01:32:27 Lightning.local configd[22]: bootp_client_open_socket: S_get_bootp_socket() failed, No route to host
Jul 26 01:32:27 Lightning.local configd[22]: bootp_client_bind_socket_to_if(en1, 6): session socket isn't open
Jul 26 01:32:27 Lightning.local configd[22]: bootp_session_transmit: neither bpf nor socket send available
Jul 26 01:32:27 Lightning.local configd[22]: bootp_client_bind_socket_to_if(en1, 0): session socket isn't open
Jul 26 01:32:28 Lightning.local configd[22]: bootp_session_delayed_close(): socket is already closed
I've tried rebooting, clearing the PRAM, deleting Prefs, etc, but nothing seems to have worked.
Anyone any ideas what is going on or what else to try? It used to work perfectly before I upgraded.
Thanks

I am also having this problem since I upgraded to Mountain Lion. I did an upgrade from Lion, not a clean install. I had done a clean install of Lion though. In my case, the network connection is working most of the time, but it is droping one a day. Deactivating the Ethernet and the Wi-Fi adapters and reactivating them does not help.
Here is my what I am getting in the console when I have lost internet connection and I try to renew the DHCP lease:
2012-08-30 6:13:59.158 PM configd[17]: bootp_session: bind port 68 failed, No route to host
2012-08-30 6:13:59.158 PM configd[17]: bootp_client_open_socket: S_get_bootp_socket() failed, No route to host
2012-08-30 6:13:59.158 PM configd[17]: bootp_client_enable_receive(en0): failed
2012-08-30 6:14:00.158 PM configd[17]: bootp_session_delayed_close(): socket is already closed
And I get a self assigned IP.
I hope Apple will have a fix for this soon!
Cheers!
JF

Client Install Fails - Unable to get Win32_OperatingSystem object

I have a PC that won't install the SCCM client via Client Push. In the CCM.Log file on the site server, it connects to the IPC$ and admin$ shares using my client installation account, but then it comes back with this error:
---> Unable to get Win32_OperatingSystem object from WMI on remote machine "PCNAME", error = 0x80080005.
I know that error means that access was denied to WMI, and I verified that when I run wbemtest manually (using the same client installation account), I can connect to the root\cimv2 object on that PC but when I try to enumerate the instances of the Win32_OperatingSystem object, I get the same error.
I also tried using Computer Management applet (remotely - I have no local access to this PC) to look at the WMI Control properties. Again, I get the same access denied error so I can't check/change the security permissions that way.
I have verified that my client installation account is in the local Administrators group of the PC. I've already tried rebuilding the WMI repository - that worked but it didn't fix the access issue. I know I can install the client manually but I'm guessing I'd still have a problem with inventories, etc. that are dependent on access to that WMI object. Any suggestions about how to go about fixing the WMI access issue?
Thanks so much, --Jo

Finally getting back to this issue after vacaton... sigh.
I got a little further. I took client push out of the mix and ran ccmsetup.exe locally on the PC. This time the client installation ran. However, I'm still getting a similar error from the client itself and the client is not talking to the site. After the client was installed, only about 10 of the log files showed up in system32\ccm\logs.
ccmexec.log shows this error:
Endpoint'PolicyAgent_PolicyEvaluator' return 0x80070057 from event notification
PolicyAgentProvider.log has these lines repeating:
Failed to create actual config class for 'CCM_RootCACertificates'
Failed to update namespace 'Machine' (80041002)
Successfully updated namespace 'DefaultMachine'
Successfully updated namespace 'DefaultUser'
Failed to create actual config class for 'CCM_MulticastConfig'
Failed to update namespace 'Machine' (80041002)
PolicyEvaluator.log has this error:
Received notification that Local policy has changed.
Failed to trigger Machine settings update (80070057)
SrcUpdateManager has these errors:
Instance of CCM_SourceUpdateClientConfig doesn't exist in WMI
Failed to get instance of CCM_SourceUpdateHistory, error 80041002
ClientIDManagerStartup.log has these errors:
GetSystemEnclosureInfo failed (0x80080005)
ComputeHardwareID failed (0x80080005).
RegTask: Failed to create registration request body. Error: 0x80080005
The rest of the logs that exist (LocationServices, StatusAgent, ClientLocation, RemCtrl, and setuppolicyevaluator) appear to be OK.
These seem to all be WMI-related errors/issues, but I can't find any specific information on any SCCM/SMS websites/forums that address these particular errors in these particular log files. I've tried rebuilding the repository (several times), I've done the regsvr stuff as discussed above, etc.
I ran WMIDIAG next. It ran for a little less than two hours - not sure if that's normal or not, but the log file continued to update the entire time. Now I have this log file and I'm not sure what to do with the issues I found. I'm looking at the WMI REPORT: BEGIN section... I see instructions that make sense for most of the errors. However, the section of log file below shows the area that is most likely causing issues for SCCM because it is the same error I get on the client install. I have no idea how to fix this stuff - any help would be appreciated:
31997 14:20:05 (1) !! ERROR: WMI ENUMERATION operation errors reported: .......................................... 33 ERROR(S)!
31998 14:20:05 (0) ** - ROOT/CIMV2, InstancesOfAsync, CIM_USBDevice, 0x80080005 - .
31999 14:20:05 (0) ** - ROOT/CIMV2, InstancesOfAsync, CIM_USBHub, 0x80080005 - .
32000 14:20:05 (0) ** - ROOT/CIMV2/SMS, InstancesOfAsync, SMS_Class_Template, 0x80041011 - (WBEM_E_PROVIDER_NOT_FOUND) Provider referenced in the schema does not have a corresponding registration.
32001 14:20:05 (0) ** - Root/Default, InstancesOf, SystemRestore, 0x80080005 - Server execution failed.
32002 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_Process, 0x80080005 - Server execution failed.
32003 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_OperatingSystem, 0x80080005 - Server execution failed.
32004 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_ComputerSystem, 0x80080005 - Server execution failed.
32005 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_Service, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32006 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_Bios, 0x80080005 - Server execution failed.
32007 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_IP, 0x80080005 - Server execution failed.
32008 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_TCP, 0x80080005 - Server execution failed.
32009 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_UDP, 0x80080005 - Server execution failed.
32010 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_Tcpip_ICMP, 0x80080005 - Server execution failed.
32011 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Cache, 0x80080005 - Server execution failed.
32012 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Memory, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32013 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Objects, 0x80080005 - Server execution failed.
32014 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_PagingFile, 0x80080005 - Server execution failed.
32015 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_Processor, 0x80080005 - Server execution failed.
32016 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfOS_System, 0x80080005 - Server execution failed.
32017 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfProc_Process, 0x80080005 - Server execution failed.
32018 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfRawData_PerfProc_Thread, 0x80080005 - Server execution failed.
32019 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_IP, 0x80080005 - Server execution failed.
32020 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_TCP, 0x80080005 - Server execution failed.
32021 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_UDP, 0x80080005 - Server execution failed.
32022 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_Tcpip_ICMP, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32023 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Cache, 0x80080005 - Server execution failed.
32024 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Memory, 0x80080005 - Server execution failed.
32025 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Objects, 0x80080005 - Server execution failed.
32026 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_PagingFile, 0x80080005 - Server execution failed.
32027 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_Processor, 0x80080005 - Server execution failed.
32028 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfOS_System, 0x80080005 - Server execution failed.
32029 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfProc_Process, 0x80080005 - Server execution failed.
32030 14:20:05 (0) ** - Root/CIMv2, InstancesOf, Win32_PerfFormattedData_PerfProc_Thread, 0x80080005 - Server execution failed.
32031 14:20:05 (0) **
32032 14:20:05 (1) !! ERROR: WMI EXECQUERY operation errors reported: ............................................ 17 ERROR(S)!
32033 14:20:05 (0) ** - Root/Default, SELECT * FROM SystemRestore, 0x80080005 - Server execution failed.
32034 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_LogicalDisk WHERE FreeSpace > 10000000 AND DriveType = 3, 0x80080005 - Server execution failed.
32035 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_PageFileUsage, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32036 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_BIOS WHERE Version IS NOT NULL, 0x80080005 - Server execution failed.
32037 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_NetworkAdapter WHERE AdapterType IS NOT NULL AND AdapterType != "Wide Area Network (WAN)" AND Description != "Packet Scheduler Miniport", 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32038 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_Processor WHERE Name IS NOT NULL, 0x80080005 - Server execution failed.
32039 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_DiskDrive, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32040 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_ComputerSystem, 0x80080005 - Server execution failed.
32041 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_DiskPartition, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32042 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_LogicalDisk WHERE Description != "Network Connection", 0x80080005 - Server execution failed.
32043 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_SoundDevice, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32044 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_VideoController, 0x80080005 - Server execution failed.
32045 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_USBController, 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32046 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_DesktopMonitor, 0x80080005 - Server execution failed.
32047 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_PointingDevice WHERE Status = "OK", 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32048 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_Keyboard, 0x80080005 - Server execution failed.
32049 14:20:05 (0) ** - Root/CIMv2, SELECT * FROM Win32_SystemDriver WHERE StartMode != "Disabled", 0x80041013 - (WBEM_E_PROVIDER_LOAD_FAILURE) COM cannot locate a provider referenced in the schema.
32050 14:20:05 (0) **
32051 14:20:05 (0) ** WMI PUT operations: ........................................................................ OK.
32052 14:20:05 (0) ** WMI DELETE operations: ..................................................................... OK.
32053 14:20:05 (0) ** WMI GET VALUE operations: .................................................................. OK.
32054 14:20:05 (0) ** WMI static instances retrieved: ............................................................ 1541.
32055 14:20:05 (0) ** WMI dynamic instances retrieved: ........................................................... 0.
32056 14:20:05 (0) ** WMI instances request cancellations (to limit performance impact): ......................... 0.
32057 14:20:05 (0) **
32058 14:20:05 (0) ** 38 error(s) 0x80080005 - (WBEM_UNKNOWN) This error code is external to WMI.
32059 14:20:05 (0) **
32060 14:20:05 (0) ** 1 error(s) 0x80041011 - (WBEM_E_PROVIDER_NOT_FOUND) Provider referenced in the schema does not have a corresponding registration
32061 14:20:05 (0) ** => This error is typically due to the following major reasons:
32062 14:20:05 (0) **    - The application queried by the WMI provider is not installed, not available or not running
32063 14:20:05 (0) **      at the time of the request was made. This error can also be generated because
32064 14:20:05 (0) **      the application supporting the providers has been uninstalled.
32065 14:20:05 (0) **    - The WMI provider binary files are not accessible (e.g. access denied ACL).
32066 14:20:05 (0) **    - A WMI provider registration problem at the CIM level (MOFCOMP.EXE) or at the COM level (REGSVR32.EXE).
32067 14:20:05 (0) **      You must re-register the WMI provider by recompiling its associated MOF file with MOFCOMP.EXE
32068 14:20:05 (0) **    Note: - If the WMI provider DLL CIM and COM registrations are correct, this error can
32069 14:20:05 (0) **            be returned because the provider has a dependency on another DLL that cannot be
32070 14:20:05 (0) **            loaded (missing or bad DLL)
32071 14:20:05 (0) **          - Dependencies can be found with the DEPENDS.EXE tool coming with the
32072 14:20:05 (0) **            Windows XP and Windows 2003 Support Tools. The command line is as follows:
32073 14:20:05 (0) **            e.g. DEPENDS.EXE <PATH><Provider.DLL>
32074 14:20:05 (0) ** => If the software has been de-installed intentionally, then this information must be
32075 14:20:05 (0) **    removed from the WMI repository. You can use the 'WMIC.EXE' command to remove the provider
32076 14:20:05 (0) **    registration data and its set of associated classes.
32077 14:20:05 (0) ** => To correct this situation, you can:
32078 14:20:05 (0) **    - Install or start the application supporting these providers.
32079 14:20:05 (0) **    - Register the providers in CIM (MOFCOMP) or DCOM (REGSVR32).
32080 14:20:05 (0) **    Note: In this case the provider should also be listed in the 'missing WMI
32081 14:20:05 (0) **          provider DCOM registrations' or in the 'missing WMI provider files' section.
32082 14:20:05 (2) !! WARNING: Re-registering with REGSVR32.EXE all DLL from 'C:\WINDOWS\SYSTEM32\WBEM\'
32083 14:20:05 (0) **          may not solve the problem as the DLL supporting the WMI class(es)
32084 14:20:05 (0) **          can be located in a different folder.
32085 14:20:05 (0) **          You must refer to the class name to determine the software delivering the related DLL.
32086 14:20:05 (0) **
Thanks, --Jo

Unable to get ip address from DHCP server for Aironet 1130AG Access Point

I have a network in which DHCP server is enabled. I have read the installation guide also there it is mentioned that 1130G Access point will not have any staic ip assigned to it.So it will automatically get the ip from the DHCP server from the network. I have connected that from the network but it is unable to get the ip address from the same. The same thing i have configured in the netgear it is coming fine. I have seen the sonic wall and used the IPSU tool also from checking the ip address from Mac Address but i am not able to get the same. Please provide me some tips to check where i am wrong in configuration because the first web page also not coming because of the ip address.

narendra,
I would suggest that the AP be connected to a laptop or desktop pc that would run a local dhcp server with a small scope setup...plenty of free ones on the web(this pc would obviously not be connected to your currnet network). This way you can watch the dhcp server hand the AP it's address (this can take a few minutes). Once you have the address use it to access the GUI and give the AP a static address (I find it good pratice to give all my autonomous AP's static addresses for ease of troubleshooting)...Hope that helps.

WRVS4400N Unable to get DHCP address via wireless

I am having an issue with the WRVS4400N. I am unable to get a DHCP address via wireless. If I connect directly to the router via RJ45, I get a dhcp address an and able to get to the internet. Has anyone ran into this issue.

This seems to be a problem with the latest firmware (v1.01.03) available from Linksys for this router. The stock firmware for my WRVS4400N router assigned DHCP addresses to wireless devices without any issue. As soon as I upgraded the router to v1.01.03, the router no longer assigns DHCP addresses to wireless devices. I have verified there is no issue with the router itself by rolling back to version 1.00.16 with the recovery utility.
One workaround I noticed with firmware v1.01.03 is that the router will actually assign DHCP addresses to wirelss devices temporarily if it assigns a DHCP address to a device connected to the physical port. This only last for a little before the router stops giving out DHCP address to wireless devices though. It's a shame since I was looking forward to some of the features in the v1.01.03 firmware.
Chuck

Client unable to get IP address on guest wlan

Hi all, I recently setup a 2504 WLC that has two primary WLANs (internal and guest) which get their IP addresses from a central DHCP server using the local router's broadcast forwarding. Things seem to be working well for the internal wlan, but clients on the guest wlan don't seem to be getting IP addresses. If I give the client a static IP they are able to communicate across the wlan okay.
It is worth noting that I am using LAG between the controller and router and this guest wlan is really just a regular wlan (with PSK) that has an access-list applied to force it to the internet only. The access-list should be allowing dhcp requests through, but in any case, I removed the access-list and it made no difference.
Here is a debug client for a machine connected to the guest vlan (vlan 33). The internal wlan is on the 10.10.10.0/24 network (same as wired and same that the AP's are connected to) and the guest wlan is 10.33.0.0/16.     I don't understand why I am seeing the dhcp request come from the internal vlan/wlan first and it gets an IP address on this network. I then see a request on the guest wlan/vlan at which point it appears to get a valid IP address on the guest network (10.33.0.0), but the client never sees this.
Thoughts?
Thanks,
Bryan
(Cisco Controller) >debug client 8c:2d:aa:36:ca:a3
*DHCP Socket Task: Feb 25 00:49:32.991: 8c:2d:aa:36:ca:a3 DHCP received op BOOTREQUEST (1) (len 308,vlan 1, port 13, encap 0xec03)
*DHCP Socket Task: Feb 25 00:49:32.991: 8c:2d:aa:36:ca:a3 DHCP processing DHCP DISCOVER (1)
*DHCP Socket Task: Feb 25 00:49:32.991: 8c:2d:aa:36:ca:a3 DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
*DHCP Socket Task: Feb 25 00:49:32.991: 8c:2d:aa:36:ca:a3 DHCP   xid: 0xbcf5ea3c (3170232892), secs: 0, flags: 0
*DHCP Socket Task: Feb 25 00:49:32.991: 8c:2d:aa:36:ca:a3 DHCP   chaddr: 8c:2d:aa:36:ca:a3
*DHCP Socket Task: Feb 25 00:49:32.992: 8c:2d:aa:36:ca:a3 DHCP   ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Feb 25 00:49:32.992: 8c:2d:aa:36:ca:a3 DHCP   siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Socket Task: Feb 25 00:49:32.992: 8c:2d:aa:36:ca:a3 DHCP successfully bridged packet to DS
*DHCP Socket Task: Feb 25 00:49:32.992: 8c:2d:aa:36:ca:a3 DHCP received op BOOTREPLY (2) (len 331,vlan 1, port 13, encap 0xec00)
*DHCP Socket Task: Feb 25 00:49:32.993: 8c:2d:aa:36:ca:a3 DHCP processing DHCP OFFER (2)
*DHCP Socket Task: Feb 25 00:49:32.993: 8c:2d:aa:36:ca:a3 DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Socket Task: Feb 25 00:49:32.993: 8c:2d:aa:36:ca:a3 DHCP   xid: 0xbcf5ea3c (3170232892), secs: 0, flags: 0
*DHCP Socket Task: Feb 25 00:49:32.993: 8c:2d:aa:36:ca:a3 DHCP   chaddr: 8c:2d:aa:36:ca:a3
*DHCP Socket Task: Feb 25 00:49:32.993: 8c:2d:aa:36:ca:a3 DHCP   ciaddr: 0.0.0.0, yiaddr: 10.10.10.165
*DHCP Socket Task: Feb 25 00:49:32.993: 8c:2d:aa:36:ca:a3 DHCP   siaddr: 10.10.10.246, giaddr: 0.0.0.0
*DHCP Socket Task: Feb 25 00:49:32.993: 8c:2d:aa:36:ca:a3 DHCP   server id: 10.10.10.246 rcvd server id: 10.10.10.246
*DHCP Socket Task: Feb 25 00:49:32.993: 8c:2d:aa:36:ca:a3 DHCP successfully bridged packet to STA
*DHCP Socket Task: Feb 25 00:49:32.994: 8c:2d:aa:36:ca:a3 DHCP received op BOOTREPLY (2) (len 308,vlan 33, port 13, encap 0xec00)
*DHCP Socket Task: Feb 25 00:49:32.994: 8c:2d:aa:36:ca:a3 DHCP processing DHCP OFFER (2)
*DHCP Socket Task: Feb 25 00:49:32.994: 8c:2d:aa:36:ca:a3 DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Socket Task: Feb 25 00:49:32.994: 8c:2d:aa:36:ca:a3 DHCP   xid: 0xbcf5ea3c (3170232892), secs: 0, flags: 0
*DHCP Socket Task: Feb 25 00:49:32.994: 8c:2d:aa:36:ca:a3 DHCP   chaddr: 8c:2d:aa:36:ca:a3
*DHCP Socket Task: Feb 25 00:49:32.994: 8c:2d:aa:36:ca:a3 DHCP   ciaddr: 0.0.0.0, yiaddr: 10.33.1.1
*DHCP Socket Task: Feb 25 00:49:32.995: 8c:2d:aa:36:ca:a3 DHCP   siaddr: 10.10.10.246, giaddr: 10.33.0.1
*DHCP Socket Task: Feb 25 00:49:32.995: 8c:2d:aa:36:ca:a3 DHCP   server id: 10.10.10.246 rcvd server id: 10.10.10.246
*DHCP Socket Task: Feb 25 00:49:32.995: 8c:2d:aa:36:ca:a3 DHCP successfully bridged packet to STA
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP received op BOOTREQUEST (1) (len 308,vlan 1, port 13, encap 0xec03)
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP processing DHCP REQUEST (3)
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP   xid: 0xbcf5ea3c (3170232892), secs: 1, flags: 0
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP   chaddr: 8c:2d:aa:36:ca:a3
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP   ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP   siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP   requested ip: 10.10.10.165
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP   server id: 10.10.10.246 rcvd server id: 10.10.10.246
*DHCP Socket Task: Feb 25 00:49:33.997: 8c:2d:aa:36:ca:a3 DHCP successfully bridged packet to DS
*DHCP Socket Task: Feb 25 00:49:33.998: 8c:2d:aa:36:ca:a3 DHCP received op BOOTREPLY (2) (len 308,vlan 1, port 13, encap 0xec00)
*DHCP Socket Task: Feb 25 00:49:33.998: 8c:2d:aa:36:ca:a3 DHCP processing DHCP NAK (6)
*DHCP Socket Task: Feb 25 00:49:33.998: 8c:2d:aa:36:ca:a3 DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Socket Task: Feb 25 00:49:33.998: 8c:2d:aa:36:ca:a3 DHCP   xid: 0xbcf5ea3c (3170232892), secs: 0, flags: 8000
*DHCP Socket Task: Feb 25 00:49:33.998: 8c:2d:aa:36:ca:a3 DHCP   chaddr: 8c:2d:aa:36:ca:a3
*DHCP Socket Task: Feb 25 00:49:33.998: 8c:2d:aa:36:ca:a3 DHCP   ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Feb 25 00:49:33.998: 8c:2d:aa:36:ca:a3 DHCP   siaddr: 0.0.0.0, giaddr: 0.0.0.0
*DHCP Socket Task: Feb 25 00:49:33.998: 8c:2d:aa:36:ca:a3 DHCP   server id: 10.10.10.246 rcvd server id: 10.10.10.246
*DHCP Socket Task: Feb 25 00:49:33.998: 8c:2d:aa:36:ca:a3 DHCP successfully bridged packet to STA
*DHCP Socket Task: Feb 25 00:49:34.000: 8c:2d:aa:36:ca:a3 DHCP received op BOOTREPLY (2) (len 308,vlan 33, port 13, encap 0xec00)
*DHCP Socket Task: Feb 25 00:49:34.000: 8c:2d:aa:36:ca:a3 DHCP processing DHCP NAK (6)
*DHCP Socket Task: Feb 25 00:49:34.000: 8c:2d:aa:36:ca:a3 DHCP   op: BOOTREPLY, htype: Ethernet, hlen: 6, hops: 0
*DHCP Socket Task: Feb 25 00:49:34.000: 8c:2d:aa:36:ca:a3 DHCP   xid: 0xbcf5ea3c (3170232892), secs: 0, flags: 8000
*DHCP Socket Task: Feb 25 00:49:34.000: 8c:2d:aa:36:ca:a3 DHCP   chaddr: 8c:2d:aa:36:ca:a3
*DHCP Socket Task: Feb 25 00:49:34.000: 8c:2d:aa:36:ca:a3 DHCP   ciaddr: 0.0.0.0, yiaddr: 0.0.0.0
*DHCP Socket Task: Feb 25 00:49:34.000: 8c:2d:aa:36:ca:a3 DHCP   siaddr: 0.0.0.0, giaddr: 10.33.0.1
*DHCP Socket Task: Feb 25 00:49:34.000: 8c:2d:aa:36:ca:a3 DHCP   server id: 10.10.10.246 rcvd server id: 10.10.10.246
*DHCP Socket Task: Feb 25 00:49:34.000: 8c:2d:aa:36:ca:a3 DHCP successfully bridged packet to STA
*apfMsConnTask_1: Feb 25 00:49:35.320: Stats update: Non Zero value

One way to test also is to connect a laptop to a port assigned for the guest vlan. If the device gets an IP, then it's something on the WLC you have to configure. If the device doesn't, then it's a network issue or dhcp server issue.
Sent from Cisco Technical Support iPhone App

E62 though connected but unable to get browsing

I got Nokia E62.
I have connected this phone through USB Cable with Modem.
All got successfully done and connected but unable to browse on phone.
Is there any setting to be done on phone to get start browsing?
Can anyone try to send suggetion?
Attachments:
E62-3.JPG ‏99 KB
E62-1.jpg ‏147 KB

Hi there.
Some hotel networks require some sort of authentication, or sometimes even payment to connect to the network. If you are connected to the wireless network, and the network requires this, you should be greeted with a page as every time that you attempt to connect to a wireless network, the iPad checks for this.
I would also try contacting the hotel's network troubleshooting department for help also, as they may have a different configuration than normal networks do.
Hope this helps.

Help, Connection failed & i cant get up

i recently started using my old, better comp but it refuses to connect to the internet. :-(
in the bottom left of my screen it shows the linksys square but its greyed out and i cant do anything with it but a mouseover says "start here". ive tried restarting the program but nothing happens. in my networks my wireless network is disabled and when i try to enable it, it says "connection failed"
ive enabled windows zero which allowed to get me to get on the internet once but because the wireless network is disabled and i cant enable it i have a very hard time finding the "available networks" screen.
my questions are, 1) is there a way to fix the linksys by means of repairing from this problem?
2) anybody know of a comand prompt or something to bring the available networks up
and 3) i had the same problem on my other computer but had a tiny icon of my wireless which i could just click "repair" on but i cant get the icon down there/cant get the repair option on the network
thanks in advance post if im to vague (im not sure what the problem is and only screwing around for hours led me to find the internet the first time....which i cant remember what i did of coarse lol)

Very simple! uninstall the linksys s/w.....insert the setup cd and exit from the welcome screen (DONT CLICK ON CLICK HERE TO START). unplug and replug the adapter. u will get a found new h/w wizard. It will do u want to connect to the inter. Say not this time. It will ask wat u want the wizard to do? select install the s/w automatically. It will install the adapter drivers. Try to detect ur n/w
Linksys Setup CD said "Use Win XP or better"
So i installed Linux

Unable to get IP address from DHCP

hi all,
I have a AP1131 which cannot get IP from DHCP server. I have tried to configure static IP address and controller IP by lwapp command and the AP can successfully joined the controller. However, after I changed it to DHCP in WLC, it cannot get IP address and all lwapp config is gone. It cannot join the controller anymore only after I reset it and configure a static IP for it. The following error message appears after I changed it to DHCP in the WLC:
*Mar 7 08:44:36.511: RESETTING THE STATIC IP ADDRESS: LWAPP goes back to discovery
%WIDS-6-DISABLED: IDS Signature is removed and disabled.
%LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
%LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
%LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
%LINK-3-UPDOWN: Interface Dot11Radio1, changed state to up
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
%LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
%LWAPP-3-CLIENTERRORLOG: Config Command: error verifying sequence number
Any expert has some idea on it?
Thanks.

Is that AP on the same subnet as the other AP's? The thing is, when you configure the AP with static information, you say the AP is able to join the WLC. This means that there is no issue with the AP. Now when you set the AP to use DHCP and not static, the AP does not obtain a DHCP address? Is that correct? If you have more than one AP on the same switch and on the same vlan, and only one has an issue, then maybe reset that AP to default and see if that fixes it. I'm also assuming that the vlan is being forwarded and you have enough dhcp address in the scope.

Unable to get IP address DHCP-NAT

I bought this modem few days ago, the new airport extreme with the latest firmware 7.7.3 I think.(upgraded after it does not work). This router only works when I set it up in a bride mode connecting to anther router. It is not able to get an IP or dns if I connect it directly to the service provider fibre modem. I tried all methods online...reset it to factory, reset, power up sequence waited 15 mins for modem and then router...etc...etc...etc. It just could not get a connection to the internet when I connect it directly to the ISP modem. Sent it to the service center and they said everthing is fine and working there on their side. Got no clue why it is like this. I suspect it might not be compatible with my ISP modem but I am not really sure. It should be a very straight forward setup like any routers I have used over the years. Any ideas? I already use mavericks x 10.9.3 and even tried to do it with a windows 7 laptop...No resolution. Called up apple and asked for a refund and they refused it.

I configured it as a bridge bit it is getting 169.xx.xx.xx ip address.
That would indicate to me that the Extreme cannot find the DHCP service provided by your ISP that is passed-through your ZTE modem. This may also indicate that the Extreme and the ZTE may not be compatible with each other.
Just to be sure, please check out the following AirPort User Tip for power recycling your network hardware.

Wicd: "Connection failed: Unable to get IP Address"

Similar Messages

Maybe you are looking for