Wierd VPN behavior

I have a VPN server in my internal network, forwarded to the outside thru the actiontec fios router.
It works fine, but the wierd thing is, whenever i connect from a client machine, that machine becomes the only machine that can ever connect again - until i reboot the router.
Ive tried 2 different servers as the PPTP server and it behaves the same way. one client can connect, disconnect, and it works fine, but when i try to connect a different client, it just hangs like its not responding at all.
Reboot the router and wait awhile, and a different machine can connect, but then it becomes the only one that can.
Any ideas what could be causing this? I'm totally stumped.

Neither option should affect VPN. There would be a dedicated IPSEC or PPTP option otherwise. The next place I would check if it is a problem with the ActionTec would be the Firewall. If you go to the Firewall Settings and check the logs, if you remember what times you were having issues with the VPN do any entries there coorelate with your attempts to reach another machine?
========
The first to bring me 1Gbps Fiber for $30/m wins!

Similar Messages

Wierd button behavior: flashing between Up and Over, won't go to frames

I have this strange behavior with buttons. These are button instances, not movie clips used as buttons.
I created a list of buttons for a drop down menu. Created the first one then dupliacted the symbol to create the others. The buttons have an Up and Over state. I coded each button in the normal way - for example:
on (release, releaseOutside) {
gotoAndStop("M1-2S-1");
Problem: the first button works fine but all the duplicated buttons act like movie clips with no stop. They cycle between Up and Over states and the goto code does not work.
I an using Flash CS5, Actionscript 2.0

Do all the instances have unique ids? Are the duplicate buttons displayed as Movie Clips (check the Properties tab)? If you're using goto actions anyway, why are you using buttons?

Bizarre VPN behavior with Cymphonix Web Filtering Device

We just purchased some Cymphonix web filtering devices. These devices sit in-line (as a bridge) on the way from our internal network to the inside interface of our failover pair of 5520 ASAs. The ASAs are active/passive, single context. The software rev is 8.4(2).
We run about 320 site-to-site VPNs as well as AnyConnect VPNs to our ASAs. When I brought the Cymphonix devices in-line, all appeared to be working. Traffic was flowing out to the internet from our internal network. I was seeing stats and analysys from the Cymphonix device. However, after a few minutes, almost all of our VPNs went down (both site-to-site and Anyconnect). Traffic from the internal network to the internet was still working fine. When I tried to re-establish an Anyconnect VPN using my laptop on an outside connection, it failed. The message said the ASA "rejected" the connection. I turned up some debug on the ASA and got messages that included text like "internal error". Once I cabled the inside of the ASA directly back to the switch instead of going through the Cymphonix (and rebooted the ASA, just to be safe), the VPNs came back up.
I'm scratching my head, to put it mildly. A VPN is negotiated to the ASA. The traffic involved in establishing and maintaining the VPN will never see the Cymphonix box because the ASA processes it and it goes no further. So, how can connecting something to the inside interface of the ASA cause the VPNs to crumble? I should be able to connect anything I want or nothing at all to the inside of the ASA and it shouldn't matter one bit to the health of the VPNs. Here's another twist: all of the traffic that comes out of those site-to-site VPNs is delivered to an interface other than the inside (traffic from our customers is delivered to an isolated part of our network). So the inside interface is even more "uninvolved" in those site-to-site VPNs.
Traffic from the internal network out to the internet was flowing fine. Basic functionality was fine. Since I first tried this, I've wondered if I should have used a cross-over cable, but I find that hard to accept as a problem. How could non-VPN traffic be working fine our to the internet if I needed a cross-over cable? I'm reasonably certain the interfaces on the ASA are supposed to support auto-MDIX anyway.
Anybody have an idea of where to start on this one?
Thanks
Patrick

Hi Patrick,
I appreciate that you seek help here but assumptions alone won't bring anyone any further.
To help us to help you: include the debugs, I mean more details than "some debug included the message internal error"
Give us details (sanitize usernames, passwords, public addresses) and logs resp. debug output.
Networks are deterministic, the art is to understand how things are determined.
Regards,
MiKa

Wierd system behavior after software update

For some reason I got this great idea to reinstall my system from scratch, last week.
I did two identical, redundant backups...both with Carbon Copy Cloner, onto 2 different external drive partitions.
Then, I reformatted my aluminum powerbook g4 HD and did an OS 10.5.6 clean install.
Before the install, i used Disk Utility to ensure the SMART status was OK.
It was.
Immediately after that, I did a software update, updating it to 10.5.8.
Next, I use Migration Assistant, to restore all my docs and apps from a clone of my original HD that I had made with Carbon Copy Cloner, on an external drive.
Reboot was OK and all my files and apps were back.
Then, being a diligent Mac user, I ran software update again, and saw that there was an apple security update and some other updates that needed to be installed.
I went ahead with that.
Now the mac won't boot...the spinning gear runs for 2-3 minutes, then all i get is the grey Ghostbusters circle with a slash through it.
But If I put my original system 10.5.6 installer CD in the slot, and reboot, System 10.5.8 restarts from my HD, after which I can then remove the CD from the Mac and everything works fine.
Except that, for every restart, I have to use the Installer CD.
And now I'm afraid to ever update the OS again.
I went back and did the whole thing over again in the same order...with the same results.
The system apparently finds something on the CD, that it needs, so it can start from the system 10.5.8 that's installed on my HD.
That's wierd.
In one sense this suggests to me that I was probably right in thinking that a clean system install was a good idea; it seems like there might be something awry in the old system, since as soon as I do the Migration Assistant, any further software update, hoses the OS.
About This Mac reports that I'm using:
System Version: Mac OS X 10.5.8 (9L31a)
Kernel Version: Darwin 9.8.0
Just wondering if this might ring a bell with some Genius out there, who might have a simple fix, versus re-clean installing, then software updating to 10.5.8, then reinstall all my apps, then do the security update, and hold my breath.....over and over again, until I hopefully hit the right combination.
Or, I guess I could just restore one of the redundant backups, and forget about a clean system install...but now I'm getting stubborn.
I WANT that clean install! :-)

First, I would install the 10.5.8 combo update, which contains all fixes for Leopard. It's available from http://support.apple.com/kb/DL866 . Often Software update does something odd, and applying the combo update fixes it. Repair permissions first, apply the combo update, then repair permissions again. You might try this with the system in the state it is today to see if it brings everything back into sync.

Strange VPN behavior

The issue we are seeing is that when users come in via our VPN (PIX 515) they cannot reach one of our servers. They are able to access everything else on our network without any issues. Locally the server is reachable but if you try to come in through our VPN you just cannot reach it. I should state that this particular server is a bit of an anomally. We migrated onto a new ISP quite a while ago and due to the way that our developers wrote some code I had to leave the NAT statement on the PIX that points to our old ISPs IP address from the inside and outside interfaces. The NAT does not seem to be the issue because the server can be reached from our LAN without any issue using the old IP address. I have added the old network to the vpn pool under split tunneling as I thought that the remote users were going through the Internet to reach the site rather than through the VPN tunnelt. I have configured a static route on the router that faces our ISP direcing traffic to the PIX. The VPN is configured with a dynamic policy so I don't believe that there is a rule issue. As far as I can tell it should be working so I am just cheecking to see if anybody here might hae some advice or pointers. Any assistance would be greatly appreicated.

Thanks for the response, yes the server is on the same subnet as other hosts that can be reached. When remote users try to ping it they receive no replies so I don't believe that it is an MTU issue. I did some wireshark captures to see if they might show anything of usefulness and found that when connecting via the VPN, the server does not return any syn-ack packets after the client sends the original syn packet. I did the same capture while connected to the LAN and the server responds so I am thinking that the issue might be routing related on the server. I am going to see if the server can reach hosts that are connected via the VPN and do some captures on the PIX to see if I can figure out what the packets are doing. Thank you for the suggestion, I did not even think about that being a possibility.

[BUG in coreutils-8.15] - Wierd 'du' behavior on my server ...

Suddenly, today I needed to know what's the size of the backup tars from my linux-vserver based vps running fully up-to-date arch linux and I can't seem to find out why 'du' is acting like this.
┌─[23:39:09]-[root@stavrovski]-[~]
└─› du -csxh /tmp/*
6.8M /tmp/CI
11M /tmp/CI_BEFORE_SED
6.8M /tmp/CI_w-o_mce
4.0K /tmp/cron.fAq4LB
4.0K /tmp/cron.ppna3r
4.0K /tmp/cron.R3GV1t
4.0K /tmp/cron.xDo4yg
4.0K /tmp/hsperfdata_root
1.3M /tmp/knobs
56M /tmp/packerbuild-0
20K /tmp/packertmp-0
8.0K /tmp/screens
12K /tmp/test
4.0K /tmp/yaourt-tmp-d
4.0K /tmp/yaourt-tmp-root
81M total
┌─[23:39:23]-[root@stavrovski]-[~]
└─› du -csxh /media/tars/
1.7G /media/tars/
1.7G total
┌─[23:39:44]-[root@stavrovski]-[~]
└─› du -csxh /media/tars/*
0 total
┌─[23:39:48]-[root@stavrovski]-[~]
└─› ls -1 /media/tars/|wc -l
40
So, there are not that much files for du to return total zero. And this only happens to be happening to the '/media/tars' directory. Really strange.
┌─[23:43:26]-[root@stavrovski]-[~]
└─› du -csxh /media/*
37M /media/backups
4.6G /media/gentoo
1.7G /media/tars
6.3G total
Can somebody tell what may be going on out here?
Thanks
EDIT: I ran 'strace' and got lines for each file within that directory that looks like this:
fstatat64(AT_FDCWD, "/media/tars/root-archlinux_29_Feb_2012.tar.gz", {st_mode=S_IFREG|0644, st_size=11314753, ...}, AT_SYMLINK_NOFOLLOW) = 0
Is something wrong on my end or what exactly that means? Google did not clarify this enough for me.
EDIT: Edited the subject to be more relevant to the issue.
Last edited by ViruSzZ (2012-03-09 01:24:30)

Further investigation showed that this is not happening with coreutils-8.14-1. I have installed 8.15-1 by running Syu on 2012-02-25 and after downgrading it to 8.14 'du' is working as expected.
┌─[00:14:41]-[root@stavrovski]-[~]
└─› du -csxh /media/tars/*
1.1M /media/tars/etc-archlinux_01_Mar_2012.tar.gz
1.1M /media/tars/etc-archlinux_02_Mar_2012.tar.gz
1.1M /media/tars/etc-archlinux_03_Mar_2012.tar.gz
1.2M /media/tars/etc-archlinux_04_Mar_2012.tar.gz
1.2M /media/tars/etc-archlinux_05_Mar_2012.tar.gz
1.2M /media/tars/etc-archlinux_06_Mar_2012.tar.gz
1.2M /media/tars/etc-archlinux_07_Mar_2012.tar.gz
992K /media/tars/etc-archlinux_27_Feb_2012.tar.gz
1008K /media/tars/etc-archlinux_28_Feb_2012.tar.gz
1.0M /media/tars/etc-archlinux_29_Feb_2012.tar.gz
3.1M /media/tars/mysqlbackup_01_Mar_2012.tar.gz
3.3M /media/tars/mysqlbackup_02_Mar_2012.tar.gz
3.5M /media/tars/mysqlbackup_03_Mar_2012.tar.gz
3.7M /media/tars/mysqlbackup_04_Mar_2012.tar.gz
3.9M /media/tars/mysqlbackup_05_Mar_2012.tar.gz
4.2M /media/tars/mysqlbackup_06_Mar_2012.tar.gz
4.4M /media/tars/mysqlbackup_07_Mar_2012.tar.gz
2.5M /media/tars/mysqlbackup_27_Feb_2012.tar.gz
2.7M /media/tars/mysqlbackup_28_Feb_2012.tar.gz
2.9M /media/tars/mysqlbackup_29_Feb_2012.tar.gz
155M /media/tars/public_html_01_Mar_2012.tar.gz
155M /media/tars/public_html_02_Mar_2012.tar.gz
155M /media/tars/public_html_03_Mar_2012.tar.gz
155M /media/tars/public_html_04_Mar_2012.tar.gz
155M /media/tars/public_html_05_Mar_2012.tar.gz
155M /media/tars/public_html_06_Mar_2012.tar.gz
155M /media/tars/public_html_07_Mar_2012.tar.gz
148M /media/tars/public_html_27_Feb_2012.tar.gz
155M /media/tars/public_html_28_Feb_2012.tar.gz
155M /media/tars/public_html_29_Feb_2012.tar.gz
11M /media/tars/root-archlinux_01_Mar_2012.tar.gz
11M /media/tars/root-archlinux_02_Mar_2012.tar.gz
11M /media/tars/root-archlinux_03_Mar_2012.tar.gz
11M /media/tars/root-archlinux_04_Mar_2012.tar.gz
11M /media/tars/root-archlinux_05_Mar_2012.tar.gz
11M /media/tars/root-archlinux_06_Mar_2012.tar.gz
11M /media/tars/root-archlinux_07_Mar_2012.tar.gz
11M /media/tars/root-archlinux_27_Feb_2012.tar.gz
11M /media/tars/root-archlinux_28_Feb_2012.tar.gz
11M /media/tars/root-archlinux_29_Feb_2012.tar.gz
1.7G total
and strace with codeutils-8.14-1 gives:
fstatat64(AT_FDCWD, "/media/tars/root-archlinux_29_Feb_2012.tar.gz", {st_mode=S_IFREG|0644, st_size=11314753, ...}, AT_SYMLINK_NOFOLLOW) = 0
write(1, "11M\t/media/tars/root-archlinux_2"..., 5011M /media/tars/root-archlinux_29_Feb_2012.tar.gz
I don't know why is this happening though and 'stat /media/tars' shows that it's a simple directory with tarballs in it.
┌─[00:19:16]-[root@stavrovski]-[~]
└─› stat /media/tars/
File: `/media/tars/'
Size: 4096 Blocks: 8 IO Block: 4096 directory
Device: 807h/2055d Inode: 6668599 Links: 2
Access: (0755/drwxr-xr-x) Uid: ( 0/ root) Gid: ( 0/ root)
is this a bug in coreutils-8.15-1 or my vps is buggy?
Thanks

Wierd Audio Behavior suddenly, stereo tracks now take up 2 mono tracks?????

So I start a new file, or open an existing file and all my tracks that have setero information all of a sudden take up 2 channels on the mixer, so if the audio is on track 1, meters for track 1 and 2 move. If I make track 1 a stereo track, track 2 disappears and says "Controlled by Stereo object "track 1-2""....now all my routing is messed up as this effects busses and everything...what gives? Is there something in my preferences that got changed? HELP!!!!!!!!

What the heck, tbird? Are you able to bend the parameters of time now, too? There was no post here when I replied with mine. Please, do share your secrets!

Wierd sorting behavior in report

I have a report with many fields, a region to show/hide columns, and a region for searching (scalar search fields and multi-select fields). Sorting by toggling a column header doesn't sort the field, it does something, but it doesn't sort. Something really strange is I have a column named CPU Count and when I click on the column header for CPU Arch, it sorts the CPU Count column.
I recently did the following to change NLS_SORT to BINARY_CI and
1. In the application attributes, I set the 'Application Language Derived From'
globalization attribute to "No NLS (Application not translated)", and
left the 'Application Primary Language' setting alone (English...).
2. Created a BEFORE HEADER and ON SUBMIT BEFORE COMPUTATIONS application level process as a PL/SQL Anonymous Block to force the NLS settings using ALTER SESSION commands. Set the Sequence to 0 for both.
execute immediate 'ALTER SESSION SET NLS_DATE_FORMAT="DD-MON-YYYY"';
execute immediate 'ALTER SESSION SET NLS_SORT="BINARY_CI"';
Could this have had any impact? I don't know if column sorting worked before I made those changes or not. Looking for ideas before I take this out.
Karen

Karen,
The good news is that we can see the problem you are having.
The bad news is that we're going to have to ask you to do a bit more work so we can get to the bottom of it. If you don't mind, here is the request from Marc (our reports engine expert):
"I tried to figure out what's going on with this report, but I don't know. My guess would be some combination of changed column sequence, conditional
display of columns and show/no show columns. I tried a number of different scenarios locally, but they always worked. And in the example that user sent
us, the first couple of columns seem to be working fine. I tried purging preferences, etc., but I'm still getting strange results for e.g. the usage
column. I would need to get a reproducible case set up on my local PC, so that I can add some more debug output to reports3.plb. So if this person
could provide us with a simplified example, incl. DDL script and data load scripts that we can install locally, I can a try to investigate this further. It would also help if the user could either step by step re-create this report, with perhaps fewer columns, without changing the column sequence at first, and only later hooking up column conditions, so that we can get some more information on when the sorting gets messed up."
Thanks,
Scott

Possible 1.3 Leopard fix for HP, but wierd Elements behavior

Please forgive me for copying what i typed on another forum, but it is a long process to type over again.
ok, here's hoping i dont jinx my latest luck by sharing this method before messing around with it some more. I have an HP 9800 so, of course, your milage may vary based on printer type. Here are several steps that i did in attempting to fix the issue of lightroom printing useing color profiles, I dont know which one fixed it. The first thing i didn was repair disk permissions, which i hadnt done since installing leopard and upgrading to lightroom 1.3. Then i unplugged the printer and went into the printers/fax part of system preferences and removed the printer from the box on the left. Then i right-clicked on it and chose reset print settings or something to that effect. Then I went to the library folder and erased all of the pre-installed printer drivers (which took a while, there are a ton of them that i will never use). Then i plugged the printer back in and ran software update. It found the current HP drivers for my printer. I did all that last night before bed. This afternoon I tried printing from lightroom, and while i had to redo my presets for the printing, I was able to print, using application managed colors, and get an accurate print that seems to be honoring the print profiles.
After that i tried printing in elements with profiles, which hadnt worked for me before either:
As an update, I just tried printing with Elements 4. Previously, while lightroom had a very yellowed out somewhat desaturated look when printing with profiles, Elements had a magenta, orangey cast. After following the steps above, the lightroom prints now look accurate, but elements now has the yellowy desaturated cast that lightroom previously had. This is good and bad as I use lightroom for bulk printing but elements for more accurate specialty prints. Must be something with the new driver pipeline that others have mentioned with leopard, and how the old drivers and the new drivers interact with that and each other, at least that would be my guess.
Anyone know why this fixed lightroom for me, and why elements printing wanst working since upgrading to leopard and still isnt? Thanks

go to the hard drive, the folders before you go into your user folder. Go to library, find the folder for printers and delete everything in it. I know hp is using software updater for drivers, dont know about epson. I then just plugged the printer in, ran software update, and got those drivers.

Wierd menu behavior

Please help, My intel imac has doubled up a few of the items in the apple menu, the Restart, the Shutdown and the Logout all appear twice. There also appears to be a black box surrounding certain items when I select them. I have reinstalled the system to no avial, I would be grateful for any suggestions.

Go to System Preferences/ Universal and see if something there is checked that shouldn't be. I'm at work on a PC and my memory is no longer good enough (like it ever was) to remember specifically what is enabled.

Wierd mouse behavior since installing Tiger

Since installing Tiger, the mouse I have (the standard one-button Apple mouse that came with my G5) has been acting up. Often the pointer will suddenly float away from wherever I'm pointing it (usually it will float to a corner). Is it a hardware problem or a software problem? I've only noticed it since installing Tiger. I thought it might be related to the USB Overdrive program, but I uninstalled that and the problem persists. Any advice?

Regardless of what Intego claims, test to see if it works better without their software. If it does, then I'd submit a support request to them. Firewall software by the way has one serious weakness, and that unlike firewall hardware, the software can more easily be manipulated than those settings on a hardware firewall.
Clam XAV is here:
http://www.markallan.co.uk/clamXav/
Just to note, there are currently no Mac OS X viruses in the wild. You are primarily preventing yourself from passing on viruses to PC users. Of course you can also do this by proactively only accepting e-mail attachments from people you know have no risk of having put viruses on their attachments in the first place.

Ghost links - wierd link behavior - any ideas why?

I'm having strange problems with links. Some work fine, but others do the following:
a) when you rollover them, display a blue box with a question mark, as though there should be an image there. Clicking it still works, but why the blue box?
b) when you roll over them, they show the title from a previous link, or a link somewhere else on the page. The link still points to the right place, but a rollover gives the name of another link.
c) Providing a link http address that is not even on this website, but I used on a previous website. I once opened this page with Contribute, and this may have caused the problem... but I don't know why. I didn't enter any new data.
Any ideas?

c) Providing a link http address that is not even on
this website, but I used on a previous website. I
once opened this page with Contribute, and this may
have caused the problem... but I don't know why. I
didn't enter any new data.
This problem I am unsure of. If you are talking about the browser autofilling an old URL for you, this is related to the browser history setting.
If you are talking about hyperlinks on your pages pointing to the wrong URL, then either emptying your cache or doing a "Publish All" will probably rectify things, as long as you are seeing the correct link in the iWeb program.

Wierd Cal behavior

Suddenly my calendar colors are all messed up. I reset them and they immediately revert. ***? Running 10.8.5 on 2011 MB pro

Thanks for your help so far, but still no joy.
It will not boot from an OS9 installer CD. I tried both internal optical drives (connected to an ACARD PCI ATA card) and an external SCSI drive (set to ID=3 and properly terminated). I also tried pressing the reset button, both with and without the battery installed and mains power connected. I uninstalled XPF and reinstalled it with no change. I tried both XPF 3 and XPF 4. My bus is NOT overclocked.
More details:
I have two HD, connected to the ACARD PCI card. Each has two partitions, on OSX (10.3.9) and another for OS9.2.2. I also have one HD connecte4d to the internal ATA bus with OSx (10.2.8) installed in the first 8 GB partition, and the remainder having another OS9.2.2 installed. Although I do a lot of fiddling with my Macs, I can't think of any hardware changes which could have triggered this.
This Mac has been rock stable with 10.3.x since XPF first was available to enable it to be run on a beige, so I am really puzzled.

Wierd LinkedList Behavior

Hello again:
Hope I can find help. I instantiated an instance of the java LinkedList class, then I added elements (i.e. a string array) to it using the add(Object O) function. I added approximately 5 elements to this linked list. However whenever I try to run a routine/method that displays all items in my list--it displays 5 elements, but all 5 elements are the same as the last element that I added to the linked list.
so for example say I added the following set of string objects to the linked list respectively:
egg
bed
leg
food
cat
my linked list would then display the following:
cat
cat
cat
cat
cat
very very strange. Here are pieces of the code I used to do this.
class someClass
static LinkedList arrayEEWRITE_QUEUE = new LinkedList();
//some code is here i.e. constructor etc.
public void createLinkedList()throws IOException
//some code is here
while (((line = in.readLine()) != null)
//some code is here that use string tokenizer to add tokens
//to a string array. Once array is full it is added
//to linked list
arrayEEWRITE_QUEUE.add(entry);
public void displayEEWRITE_QUEUE()
String[] entry = new String[ARRAY_MAX];
if(arrayEEWRITE_QUEUE.isEmpty() == false)
for( int k = 0; k < arrayEEWRITE_QUEUE.size(); k++)
entry = (String[])arrayEEWRITE_QUEUE.get(k);
for(int j = 0; j < ARRAY_MAX; j++)
System.out.println(entry[j]);
System.out.println();
class Main
public static void main(String[] arg) throws IOException, FileNotFoundException
     ReadWriteLine in = new ReadWriteLine("Test.txt");
     in.createLinkedList();
     in.displayEEWRITE_QUEUE();
The program compiles perfectly and does not report any errors, my only problem is as stated above. Hope to get some helpful suggestion or pointers.
Thanks
Rasheed

Since there are some methods you did not post here,
I just post a example of how to read the contents of a file
to a LinkedList and then print out the LinkedList, hope it helps:
import java.io.*;
import java.util.*;
public class SomeClass
public static void main (String [] args)
BufferedReader r = null;
String s = new String ();;
LinkedList l = new LinkedList ();
// Should be a method to read the file
try
FileInputStream stream = new FileInputStream("Test.txt");
InputStreamReader in = new InputStreamReader(stream);
r = new BufferedReader(in);
catch (FileNotFoundException e1)
System.out.println("File Test.txt does not exist");
catch (SecurityException e2)
System.out.println("You do not have permission to read Test.txt");
catch (Exception e3)
e3.printStackTrace(System.out);
// Should be a method add Strings to LinkedList
try
s = r.readLine ();
while ( s != null)
l.add (s);
s = r.readLine ();
catch (Exception e)
e.printStackTrace ();
// Should be a method to print out LinkedList
try
Iterator iter = l.iterator ();
do
System.out.println (iter.next ());
while (iter.hasNext ());
catch (Exception e)
e.printStackTrace ();

CBS make fails of SAP_ESS SCA file fails in NWDI 7.0 SP14 after ~4 hours

Hi,
    We wish to do ESS customization in our new NWDI 7.0 SP14 system (on RHEL 4.7). Importing the SAPESS09P_3-20000512.SCA (after importing its dependicies) in a ESS track completed in the Repository-import phase but fails in the next CBS-make phase with a timeout of 14430 seconds (~4 hours). The exact error i am getting is listed below. Is their some way to bump up this timeout value?
   I am new to this and am very interested in what more experienced folks suggest about this.
thanks in advance,
Steven McElwee, Duke University
20080224153849 Info   :Starting Step CBS-make at 2008-02-24 15:38:49.0310 -5:00
20080224153850 Info   :wait until CBS queue of buildspace NDI_XSSTrack_D is completely processed, before starting the import
20080224153850 Info   :waiting for CBS queue activity
20080224153921 Info   :build process already running: waiting for another period of 30000 ms
20080224153951 Info   :build process already running: waiting for another period of 30000 ms
20080224154021 Info   :build process already running: waiting for another period of 30000 ms
.......... lots more messages
20080224193917 Info   :build process already running: waiting for another period of 30000 ms
20080224193947 Info   :build process already running: waiting for another period of 30000 ms
20080224194017 Info   :no changes on the CBS request queue (NDI_XSSTrack_D) after a waiting time of 14430000 ms
20080224194017 Fatal :The request queue is not processed by the CBS during the given time intervall => TCS cannot import the request because queue is not empty
20080224194017 Fatal :Please look after the operational status of the CBS.
20080224194018 Info   :Step CBS-make ended with result 'fatal error' ,stopping execution at 2008-02-24 19:40:18.0480 -5:00

Well, I restored our NWDI system from an archive backup taken just prior to defining the new XSS Track. I then carefully followed the ESS NWDI Cookbook instructions to create the XSS Track and to import everything (SAP-JEE, SAP-BUILDT, SAP-JTECHS, and SAP-PCUI) except for SAP_ESS. I then archived to tape everything again. That was yesterday.
Today, I kicked off the import of SAP_ESS. So far, so good- it imported into the repository and is now in the process of Activation in the CBS. There have been no problems with threads stuck in the CBS queue in the QUEUED state.
Of course, it has been only 2 hours so far.
About the CBS properties for BUILD_TOOL_JDK_HOME,
JDK_HOME_PATHS and idleStart. Aside from idleStart, i have left them unchanged. But will keep this in mind should the previously mentioned wierd CBS behavior return.
Disk space is a little tight right now. I had 4 GB free before the import of SAP_ESS. Now i have 2 GB free, which seems to be holding. We have a script running to archive and delete the oracle redo logs since they are being generated at a pretty fast rate.
Once i know one way or the other about the success of this, i will post a message.
thank you everyone for your help so far!
Steven

Wierd VPN behavior

Similar Messages

Maybe you are looking for