Wifi prism pcmcia card and problems with ctrl module insert

hi
probably until initrd based kernel i can't control what module for my pcmcia wireless card zcom 325h will be used.
i think the process inserting modules for pcmcia devices is maintined by tools from pcmcia-cs pkg.
devices assigned to drivers via manfid are in /etc/pcmcia/config and in name order included /etc/pcmcia/*.conf
but when was hostap driver moved from own package into the kernel package the /etc/pcmcia/hostap.conf was removed and now i don't know how to disallow to load this ugly module after pcmcia card inserting
i would like to use orinoco_cs instead.
thanks for any help

Hello,
I am owner of AR8131 which runs with atl1c without problems.
Unfortionally it seems that module does not have any optional parameters so i guess it wont be "easy" fix.
hits:
check your bios for "NET AI" or w/e named function that checks for bad cabels ( got many problems in the past with nvidia cards if i remember correct with those type of functions )
In any case wish ya luck

Similar Messages

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?

I have a 13.5 month old Ipad2, wifi only that has had problems with wifi com from the beginning. I am learning that this is not unusual for apple. Any suggestions?
ronald1094

Try #5.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

PCMCIA card and CF card reader features in HP Envy-15 Notebook

Hi this is Thrived, I am looking for High end notebook. thats how I latched on to Envy-15 model. But I want PCMCIA card and CF card reader facility. Is it possible? and How? Please suggest me an answer.

All possible options would require an external device. There are a lot of usb card readers which still have a CF slot and as for pcmcia I have seen an Expresscard to Cardbus adapter out there but it is a big thing that sticks out the side.

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Any new about updating lion to 10.7.4 and problems with bluetooth devices like Bose Soundlink Bluetooth Speaker?

Monroe
Just in the moment i updated to lion 10.7.4 my Bose Soundlink Bluetooth stop working as good as it was. I´m gonna try the update in the Bose web page. I hope it works

Problem with develop module

I have LR 5.4 running on a mac OS 10.7.5. I am having problems with the software locking up in the Develop module. Sometimes a new image won't open and the preview screen stays black. I go back to the Library module and try to reneter the Develop module and get an error message saying there was an error trying to open the module. The entire LR screen is gray. I have to quit LR and restart the software to continue. I downloaded my software from Abobe and I was wondering if I can download a new version again and use my same serial number to reinstall the software.

Hi Rodney,
No custom print templates and this is a relatively new problem. It just
started about a week ago. I have been using the software steady for months
now. It did it once or twice last week but this weekend and today it has done
it about six times so it seems the problem is getting worse. That¹s why I
think the software may have been corrupted. I didn¹t keep a copy of the
software I downloaded so I can¹t reinstall. That¹s why I was wondering if I
could download it again and use the same serial number as before. I have only
loaded the latest version on my desktop. I also have LR 4 still installed on
my laptop and desktop. I have a big project to complete and this is really
slowing me down.
Michael
Problem with develop module
created by Andrew Rodney <https://forums.adobe.com/people/thedigitaldog> in
Photoshop Lightroom - View the full discussion
<https://forums.adobe.com/message/6445126#6445126>
Do you have any custom print templates? That might be the case, it was an
issue at one time. Delete them and try using one of the default presets.
Crash?
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at https://forums.adobe.com/message/6445126#6445126 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: To
unsubscribe from this thread, please visit the message page at
. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Photoshop Lightroom by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=3316> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
>

Apple ID and problems with credit card

Hi, I'm having a lot of problems with the credit card registered to my ID.
I always made purchases with the card registered but now I get an error message which is as follows:
"Your payment method was not accepted. Please enter valid information for payment."
I've always used the same card VISA PostePay to buy app on iTunes Store but recently I'm getting this message. How can I fix? Thanks.

Firstly, make sure that your card is not close to the expiration date listed with your card registration. Next, take a look at your iTunes linked Credit Card information in all regards. Ensure that your Apple ID and Credit Card information indeed is identical with regard to Name, Address, Postal Codes, etc. Also, if you are an Apple Store Online Customer make certain that your Profile information is all, again identical to your other linked data regarding that particular Credit Card. There may be some different information somewhere that is giving you this intermittent problem. Check Your Credit Report and ensure there are no open disputes or recent file data that is in error.

Satellite L650-1M6 and problem with video card

Good evening!
I have new Satellite L650-1M6 with no OS. When i made a fresh Windows 7 32bit installation i got several device problems. Most of them i manage to resolve my self (like wlan drivers) but now i need your professional help.
At this moment i had left this Problem Devices (from System information):
Not Available ACPI\TOS6205\4&4A257CF&0 The drivers for this device are not installed.
I think it could be video card (need to be ATI HD5470) but SysInfo say:
Adapter Type Not Available, (Standard display types) compatible
Adapter Description Standard VGA Graphics Adapter
Would appreciate any help on this.
Thank you in advance.

Hello
As I can see you got notebook without operating system and you try to install and configure your own OS.
In many postings I wrote here I write again and again that most important thing is to install all drives and Toshiba specific stuff following right installation order so here is installation order for your notebook model:
Win7
TOSHIBA Assist 3.00.10_O
TOSHIBA Extended Tiles for Windows Mobility Center V1.01
Synaptics Touch Pad Driver 15.0.8.1
Realtek Card Reader 6.1.7600.30111
TOSHIBA HW Setup Utility v2.0.0.6
TOSHIBA Supervisor Password Utility v2.0.0.3
TOSHIBA Web Camera Application V1.1.1.15
TOSHIBA HDD_SSD Alert 3.1.64.6
Intel Chipset SW Installation Utility 9.1.1.1024
Intel Management Engine Interface 6.0.30.1203
Display Driver
Intel Turbo Boost Technology Driver 1.1.1.1007
Intel Rapid Storage Technology Driver 9.5.7.1002
Conexant Audio Driver 4.119.0.61
TOSHIBA Value Added Package 1.3.3_64
LAN Driver
TOSHIBA Software Modem 2.2.97(SM2297ALS05)
Conexant Modem Driver 7.80.4.50
Bluetooth Stack for Windows by Toshiba v7.10.10(T)
Wireless LAN Driver
ConfigFree 8.0.29
I recommend you to install Win7 again and continue with all other stuff flowing this install order and I hope everything will be OK.

Crackling, Left Rear Channel noise, IRQs, 4 Gigs of Memory, fixes and problems with XFi Fatal

Hello fellow troubleshooters. Well I've been working on my XFI issues since there are so many of them trying to make the one piece in my newly built system work as intended. I will put my hardware info below this post for comparison purposes if it helps you at all or for feedback/ideas. Well first off I had the crackling noise popping so on even when my machine was idle. If you have not done this yet do it
!!! Start, Control Panel, Sounds Speech and Audio Device, Change Speaker Settings, Advanced (in device volume), ok now there is a bunch of sliders go to "options" check everything, ok now that you see all the sliders mute Everything besides: Play Control, Wave, CD Player for testing purpose. You will probably hear a difference as you do it. Especially Mic 2. Ok well that issue resolved my popping crackling noises when idle. Ok so I still have a shared IRQ issue since I have an Asus A8N32-SLI Deluxe board and the slots go as such PCI-E, PCI, PCI, PCI-E, PCI. Well since the GeForce 7800 GTX cards I have take up not just the PCI-E slot, but also the PCI slot is covered from the Huge Fan. Then the Same thing for the Second graphics card. So I have only one slot that works for my PCI Fatalty sound card. Well this forces me to share PCI IRQ between one of the Video Cards and the Sound Card. Its not a "conflict" it is simply sharing the IRQ, after the above issue fixed my popping issue this no longer was a concern. Now my big issue is that I sent my Sub Woofer in for RMA, I have the Gigaworks S750 7. THX speakers, they are great but when I really crank up the volume on them I would get the sound like a speaker was blown in the left rear channel, so I swapped another speaker in its place and I have the same problem. So the RMA folks said to send in the Sub Woofer which cost me over $30 to ship the thing only to have them tell me there is no problem. Well I had recently done RMAs on my sound card, both Video Cards, and my mother board too in hopes of fixing the next problem. So everything is new though I got a refurb on the mobo. So I'm just waiting on my Sub woofer now so I'm using my headphones and guess what I'm finding there is this noise in the left speaker, an issue I sent the headphones back for a long time ago when I was using them waiting to buy my speakers. I have the Creative Pro Gamer headphones. So now I read a post about someone else with the same issue left channel, and I have to wonder I am not alone and that usually means in Creative Labs land there probably is others with this issue that have spouses that wont let them stretch their audiophile legs with extreme volume, if this is you try it out kick up the bass, and see if you have this problem too, if so please post it here. I have no clue on this one and I am open to any ideas. Ok and the last issue!! This is the real problem I'm facing now. I play EQ2 I love my MMO titles with the occassional single player title for those short stints at the computer between work, parenting, and stuff my wife demands be started before she finishes speaking of it (those of you married know what I'm talking about). I have 2 operating systems, XP Home, and XP Pro 64. Home I use for Office, graphic design, and general applications. XP Pro 64 I use purely for gaming. All my games are installed through this OS which is on my 2 74 Gig Raptors in Raid 0, I have another Partition for XP Home, and a 3rd for all the game installs. So I recently found that after selecting Extreme Graphics option in EQ2 then moving the rest of the sliders to Max that my G5 keyboard which has a performance monitor in it showing the amount of Ram usage showed me hitting about 90% and would spilke at the same time as I found I had frame rate slowdown. So I decided to get 2 more gigs of Corsair Twin XMS 3500Pro 024x2 memory bumping me up to 4 gigs. Well I had to go into the bios I found and change a memory setting to discrete and enable the memory hole in order for XP Pro 64 and the motherboard to see the memory. At this time I was working on other things with my computer, and suddenly the popping noise came back so I'm pissed now.... But oddly its not happening in XP home, only in XP 64. So I'm thinking I may have to go to XP home for my gaming OS, then just before I install home I remember that XP home wont register 4 gigs of memory.... So I go turn off the memory hole and discrete settings and this sets the memory to 2 gigs.... Crackling sound in ALL EAX GAMES goes away.... So now clearly my issue with my sound card and EAX crackling noise is Memory related somehow. Now I have isolated it to 4 gigs of memory, but it makes me think of those folks with this issue perhaps something is amiss with their memory and how it works with timing, or onboard memory on the sound card which is a first time memory is put on a sound card?.... Any input is appreciated as to how to repair this issue, thanks for reading, below is my system set up.
rocessor >
?Model:???? x AMD Athlon(tm) 64 X2 Dual Core Processor
??????4400+
?Speed:???? 2.2GHz
?Model Number:???? 4400 (estimated)
?Performance Rating:??? PR7072 (estimated)
?Cores per Processor:?? 2 Unit(s)
?Threads per Core:??? Unit(s)
?Type:????? Dual-Core
?Internal Data Cache:?? 2x 64kB Synchronous, Write-Back, 2-way set,
??????64 byte line size
?L2 On-board Cache:?? 2x MB ECC Synchronous, Write-Back, 6-way
??????set, 64 byte line size
?<Mainboard >
?Bus(es):???? ISA PCI PCIe USB FireWire/394 i2c/SMBus
?MP Support:???? 2 Processor(s)
?MP APIC:???? No
?System BIOS:??? American Megatrends Inc. 8.2
?System:????? System manufacturer System Product Name
?Mainboard:???? ASUSTeK Computer INC. A8N32-SLI-Deluxe
?Total Memory:???? 3.9GB DDR-SDRAM
?<Chipset >
?Model:???? Advanced Micro Devices (AMD) Athlon 64 /
??????Opteron HyperTransport Technology
??????Configuration
?Front Side Bus Speed:?? 2x 005MHz (200MHz data rate)
?Total Memory:???? 4GB DDR-SDRAM
?Memory Bus Speed:??? 2x 200MHz (400MHz data rate)
?<Video System >
?Monitor/Panel:??? Default Monitor
?Monitor/Panel:??? HP D895 HP P20 2-inch Monitor
?Adapter:???? NVIDIA GeForce 7800 GTX
?Adapter:???? NVIDIA GeForce 7800 GTX
?hysical Storage Devices >
?Removable Dri've:??? Floppy disk dri've
?Hard Disk:???? WDC WD2500KS-00MJB0 (233GB)
?Hard Disk:???? WDC WD3200JD-00KLB0 (298GB)
?Hard Disk:???? NVIDIA? STRIPE? 38.49G
?Hard Disk:???? Generic USB CF Reader USB Device
?Hard Disk:???? Generic USB MS Reader USB Device
?Hard Disk:???? Generic USB SD Reader USB Device
?Hard Disk:???? Generic USB SM Reader USB Device
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVD-ROM GDR860B (CD 48X Rd) (DVD 6X
??????Rd)
?CD-ROM/DVD:???? HL-DT-ST DVDRAM GSA-463B (CD 40X Rd, 40X Wr)
??????(DVD 5X Rd, 5X Wr)
?<Logical Storage Devices >
?.44MB 3.5" (A:??? N/A
?Applications - games - storage:233GB (5GB, 65% Free Space) (NTFS)
?Xp home (D:???? 24GB (5.6GB, 23% Free Space) (NTFS)
?CD-ROM/DVD (E:??? N/A
?Xp 64 (F:???? 24GB (5GB, 63% Free Space) (NTFS)
?Raptor games (G:?? 90GB (7GB, 8% Free Space) (NTFS)
?Ssdisk (H:???? 629MB (CDFS)
?Bf2xpack cd (I:??? 677MB (CDFS)
?Farstone (J:??? 00MB (CDFS)
?Removable Dri've (K:?? N/A
?Removable Dri've (L:?? N/A
?Removable Dri've (M:?? N/A
?Back up dri've (N:??? 298GB (3GB, 44% Free Space) (NTFS)
?Removable Dri've (O:?? N/A?EvolovE

Evolve,
I have the a8n-sli Premium which as you stated is basically the same board with a couple extra items. I have the latest beta bios ver -06. Since the early fall release the option which we will be talking about was available in the premium board which it I remember was Bios rev 9. I would download the latest bios rev.
07.04 (latest beta?or go with 06)?and flash in. Here are the steps to get the proper memory options to work and I have also included my system specs to compare.
) Hit Del to get into Bios
2) Go to the second tab on the top of the screen "Advanced"
3) Select the first option in the menu "CPU Configuration"
4) Select the first option in the "CPU Configuration" menu called "DRAM Configuration"
5) Select Manual configuration from the first Menu item.
6) The last two options in the same menu for DRAM are s/w remapping over 4G and h/w remapping over 4G. Select the "s/w remapping option over 4G" and enable it. Disable the "h/w remapping over 4G."?
7) Hit f0 and save the config.
You should now at post have 4GBws total but only 3GBs of usable memory and your X-fi should crush it in XP64 and XP32.
My Specs
A8n-sli premium (Bios -06)
amd X2 4400 (~2.5 GHZ)
4GB LL patriot memory (~228 HZ)
X-Fi Extreme Music
LSI 320-2e PCI express SCSI RAID controller (256MB buffer)
2x Seagate Cheata 5K.3?dri'ves
All water cooled
Good Luck
PapaH
By the way this is defiantly a XP64 driver problem because even with h/w remapping enabled in XP32 the card sounds fine. It only happens in XP64.

New C6-01 user/phone and problem with backup/resto...

Hello everyone.
I recently purchased a new C6-01 (and first-time Nokia owner) and having trouble with getting maps restored onto a new 32GB uSDHC card and need some help.
It is my understanding that I can backup and restore all my phone contents and settings to a new memory card using Nokia Suite. So what I did is performed a complete backup using Nokia Suite, ejected the old uSD card (that came with the phone), put in the new uSD card that I had purchased and format it, then performed a complete restore to the phone and the new memory card.
During the restore, I saw errors on the phone display that said something like disk write error and gave me the option of stop or retry. I hit the retry a few times and still getting the error. Thinking it may be a bad uSD card, I returned/exchanged for another identical one. With the 2nd new card, I still get the same error message so I rebooted the phone and ran restore again but this time instead of restore everything all at once, I selected a few items at a time and eventually got everything restored, at least without errors this time.
When I ran maps after the restore, it told me that I needed to download the maps, and when I tried to download it thru a WiFi connection (at my house), I keep getting Disk error - cannot complete write. Retry or data will be lost. At this point if I run Files, it will show drive E but not any free space number (and selecting it will show free space not available). A reboot will bring back drive E and show 29.4GB free. So I am completely stumped at this point and believe that for whatever the reason I can not get maps loaded onto a non-Nokia-provided memory card.
I am running Nokia Suite 3.5.34 on WIndows XP w/SP3. The new 32GB uSDHC card is a class 4 card made by Sandisk. The phone is running the Belle Refresh v111.040.1511 dated 7/28/2012. Map version: v3.09 12wk20 b01-MW OpenGL MN-Map version 0.2.46.103
Sorry for the large amount of information posted here, but I wanted to provide enough details for you to look at. Please feel free to ask for more information and thank you in advance for your help.
Bill

yes I reformatted the card, and after it was finished, I ran Maps. When it told me I need to download the maps (and gave me 3 options), I exited and connected the phone to my computer, browsed and deleted the cities folder and the qf file. Waited a little bit and reran Maps. This time I used the WiFi connection from the phone to download.
I gave me an error when I tried to download the entire USA maps, so I selected Texas and Pennsylvania state maps. Those downloaded ok. Next when I tried to download New Jersey, it started a little bit and the disk error message came up again so I hit stop. Ran Files and saw the memory card is grayed-out (did not indicate and free space), I know the same problem is happening again.

AirPort Extreme Card Connectivity Problem with D-Link DI-524

Have the DI-524 connected to my cable modem and to my old 9600 via ethernet. The 524 connects wirelessly with my son's Dell laptop wthout difficulty. Have no encryption enabled. Have a new G5 with AE Card, which shows that I'm getting a wireless signal (all bars lit), but cannot get Safari to work. Get a "Computer to Computer" network status message. Keep getting a "This computer is not connected to the internet." message from Safari, and no amount of configuring works. The Network Set-Up Assistant keeps asking for a DHCP client ID, which I do not use with the TCP/IP setup, so I can never get through the set-up on the G5. I must say this is really ticking me off. Got no help from D-Link, except to check that the 524 seems to be working properly. the cable company was of equally no use. Hopefully, one of you Mac faithful can help me out. It's a **** shame a free-after-rebate D-Link can get up and running with the Dell, and a $100 AE Card is making me crazy.

I cannot offer any suggestions, but we've got the same problem.
My DL-524 does not play nice with my wife's 12" PowerBook using wireless, but my 15" PowerBook works fine over wireless. I normally enable WEP and MAC address filtering on the DL-524, but I disabled everything and still no dice. The PowerBook responds the same each time:
"There was an error joining the AirPort network"
I looked in the console logs (on the PowerBook) and see multiple occurrences of this:
WirelessJoin unexpected status: 8
The thing is, I generally know what I'm doing with my home network. I have 4 computers at home that work fine both wired and wireless, and like I said, my 15" PowerBook works fine wirelessly with the DL-524. But the 12" PowerBook will not communicate wirelessly.
15 PowerBook G4 1.67 Mac OS X (10.4.2)

XT 5900 and problems with Photoshop

Has anyone with an nVidia card had any problems working with the Photoshop program? I recently purchased the XT5900 VTD 128 card and have been attempting to calibrate my LCD monitor to use the Photoshop program optimally. The monitor is to be adjusted for black/gray and color gamma numbers that will allow one to work with and adjust digital photos that will closely correspond to final printed product. The Adobe Gamma utility simply does not work on my LCD monitor. I have talked with support at Envision (monitor) and MSI about problem with little success. Perhaps someone out there has encountered similar difficulties and has some suggestions/solutions. Thanks.
LJ Brown

Friend I have the opposite experience. Working on my LCD monitor (and perhaps that is part of the problem) the great picture I produce on my monitor is not reflected in the printed product. Colors are washed out a little, contrast not correct despite perfect on the monitor. Have been working with others about this problem trying to decide if it's the monitor, the video card, etc. The printer (Canon) is properly setup, all heads are in alignment,etc. I also have Photoshop CS. Have tried to calibrate the monitor with the Adobe Gamma utitlity so this problem would not occur but the calibration is poor, the black/white and color target and gamma screens just don't end up the way Adobe says they should and I presume therefore is why the printed product is less than desirable. If you have any suggestions please pass them along. Will be away for a week and will pick up the thread then.
LJ Brown

Y510p and problem with Update Nvidia Driver

Hi everyonei have problem with updating my y510p lenovo laptop nvidia driver ,my current nvidia driver version is 327.62 which i download from lenovo website,Now for better performance in new games like gta v and witcher3 ,i decide to updating nvidia driver,first remove my nvidia graphic driver from add or remove then download nvidia ver 350 from nvidia official web site , which nvidia website confirm it support my graphic card which is Gt755m , then i install new ver and during install i check clean install , after successful install , restart laptop , then there was problem . when i try to open nvidia control panel it wont running and an error showed up and said "You are not currently using a display attached to an NVIDIA GPU" .i try to open a game , game running in really low fps and i find out game run on hd graphic of my laptop and my nvidia graphic wont run .The only way to repair was i install my last nvidia driver 327.62 and run a system restore .guys what is your suggestion and how i can update my y510p nvidia driver ?Thanks

Hi Y510Man,
     The video graphics installation order is important. You need to install the Intel Graphics first, and then do the Nvidia. IIRC you should un-install the Nvidia driver, then re-install (or upgrade) the Intel HD Graphics driver. Reboot, and install the new Nvidia driver.
     I don't know why, but every time I upgraded my Y470 Nvidia driver, I had to use this procedure. First install, or re-install, the Intel driver, then install the Nvidia. You can't just upgrade the Nvidia driver without a re-install of the Intel. I think it has to do with the Optimus setting, and the automatic switching.
    Let us know how it goes.
Cheers
DragonRider

My mac book pro is verry slow, and problem with wirless, battery, cooler

Hello,
I bought 2 months ago Mac book pro 8,2 intel core i7 2760 QM CPU@ 2,4 ghz 8 core, I installed boot camp, 64 bit , and everything is running verry slow, boots up verry slow, programs, browser runs very slow, and i have a problem with my wirless connection, i get , after a wile of usage "Limited Connection" and i have to reconnect to network ( on other notebooks i dont have this issue) .
My computer runs slow because of my Hard drive 5400 rpm?
And how can i preserve my battery, are there Spare batteries on the internet for this macbook.
Sometimes when i play alot, my computer gets very hot. What cooler do you recomend for macbok pro, i heared that fan coolers aren't verry good.
If i use my macbook pro alot , it can break or something?
<EDIT> I forgot to tell, i cannot update to my lates graphic card software, i can''t update anything. I download the update and it tells me that its not compatible with the hardware. (and yes, it is the right version 100% compatible)
Thanks for your help.

Rid the MBP of Genieo and Norton AV. For Genieo, use these instructions:
http://www.thesafemac.com/arg-genieo/
Check the Norton web site for removal instructions.
If your MBP has had kernel panics. log one and post it per these instructions:
https://support.apple.com/en-us/HT201753
Ciao.

MSI R9 270x and problems with switching power-saving modes

hi,I bought this video card but now I began to twitch screen sometimes when switching video card power saving modes
it all happens in a game, or at the sites but not on the desktop
how to disable power saving mode so that it always runs at maximum frequency?
or how to disable Perf Level 0

Ok, sorry about that.
Currently seem to have a Grey Screen whenever I boot the desktop with the graphics card installed.
1. I tried system restore to see if it was a program causing the grey screen, but same problem.
2. Tried installing the cd version of the AMD drivers same problem.
3. Installed the latest version of the driver, as well as, beta version same problem.
4. Removed the graphics card and put it back in booted up, same problem.
5. Also tried the Molex Cables that came in the box to different power supply on the PSU, same problem.
PSU:
Main Board: MSI Z77A-G45
Bios Version:Version: V2.12, (9/29/2013)
Video Card Driver Version:13.250.18.0
Video Card BIOS Version:113-C6310100-X15:
Video Card: msi R9 270X Hawk
Video Card S/N: 602-V303-02SB1309098658
PSU: 650W TX650 V2 PSU 80 PLUS Bronze
12v rail Rating of listed PSU: +12V_53A, -12V_0.8A
CPU: Intel Core i5-3570K CPU @ 3.40GHz, LGA 1155, 77W
Memory: Corsair Vengeance 16GB (2x8GB) DDR3 1600 MHz (PC3 12800)
SSD/ HDD: 120GB SSD, 1TB HDD, 150GB HDD
CPU COOLER: Cooler Master Hyper 212 EVO
OC:No
Operating System: Win 8 Pro 64bit

Graphics card drivers problem with star craft 2!!!! ah!

I have a problem with my new laptop (a Compaq Presario CQ62z-200cto) that I bought for star craft II and I was hoping you guys could help.
This is my computer’s stats. They surpass the recommended settings for Star craft 2 by a little bit.
2.8 ghz phenom dual core
2gs ddr3 ram
Ati radeon mobility hd 545v (yes, this card is better than the recommend 3870)
When I first turned on star craft it said:
“Your video card drivers are out of date” and “Starcraft II does not recognize your graphics card”
In addition to this Starcraft II runs relatively poorly. I’m not sure how well it’s supposed to run, but it’s a laggy even on low-ish settings. I tried to get new drivers from ATI, but they said that if you have a laptop you should get drivers from the manufacturers, not ATI (because HP makes the specific drivers for the computer). ATI supposedly only has “generic” drivers for laptops or something like that. So ,I have to get the latest drivers from hp, which I already have (they were made in April…shesh).
So, I’m stumped it seems like the drivers are holding me back even though I have the hardware for the job, but the drivers I need don’t exist.
Any ideas? Anyone else have this problem?
Thanks,
Tim

The "graphics card" on an iMac is built into the motherboard. Therefore the only updates would be through an Apple firmware update.

Wifi prism pcmcia card and problems with ctrl module insert

Similar Messages

Maybe you are looking for