WiFi Setup problems

Trying to connect to my home router/network...
Two issues- my network is recognized and I'm prompted to input a password.
I'm assuming this is my network password? It is not working. I even tried changing the password with no success.
Then, I inputed the IP address and this seemed to work - I "connected" to the network and the Wifi symbol appeared in the upper right corner in place of the 3G indicator. However, any attempt to access the web failed even though it says I'm "connected" to my network.
Thanks for any suggestions.
Luke
Post relates to: Pre Plus p101vzw (Verizon)

Hello!
Sounds like the phne cannot get past the encryption process. What it is asking is not the password to log into the router firmware but the WEP/WPA key or passphrase setup in the wifi security settings in your router. Just need to make sure the difference is known. If known then proceed.
Since the phone is not able to get pass the encryption of the router, you could manually input the IP but cannot go further with the encryption in play.
Do this:
1. Deleted the rotuer from you wifi list on the device.
2. Log into the router and go into the wifi security settings.
3. Change the key/passphrase there and save.
4. Back to the phone, find you router, connect to it, and input the new key/passphrase made from the wifi security settings on the rotuer, and connect.
If you get the check mark to the right of your router you're in. If it says "IP association failed," then its still having problems with getting past the encryption of the router and let us know. Note the supported encryption methods are WEP, WPA and WPA2.

Similar Messages

WRT110 WIFI password problem

Hi Everyone,
I've got a very strange problem. First, I indicated WPA under Wireless Security section and typed in my passphrase. However when connecting to my wireless network name my passphrase never worked. Second, I completely disabled security and tried to simply connect without any passphrase, but I was still being asked for a passphrase nonetheless. I checked and double-checked and saved settings making sure security was disabled, but I was still being asked for a passphrase when choosing my wireless network!
I could probably restore my WRT110 to factory settings, however I don't want to loose other configurations like certain open ports and IP addresses I opened up for firewall.
Is there a way for me to resolve my WiFI password problem without restoring to factory default? I just need to figure out how to make the WiFi passpharse work. Here's what I have there:
Security Mode: WPA Personal
Encryption: TKIP
Passphrase: 0sunspot0
Key Renewal: 3600 seconds
However, when I pick my wireless network and try to connect to it by typing in 0sunspot0, I get authentication failure!
Am I doing something wrong?
Thanks,
Victor.
Solved!
Go to Solution.

I have misplaced all relevant info. for my router. I am trying to connect to a mini ipad. What do I need?
Is the router up and running and you would only want to add a device wirelessly? If so, you may access the setup page as sabretooth has said. To check the wireless settings, you may check this link, http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=476326f36c294e579ba6691a8db5411e_3698.xml&pid=80&r...

Email account setup problem with Messages app

Having recurring problems lately with a Rogers pop3 email account not syncing properly in the Playbook Messages app, unless I'm on a wifi connection. Continually tells me it's encountered an unexpected problem connecting to the Rogers server when only bridged through my phone. Is something screrwing up, or is the app designed for wifi only? I don't recall this problem originally.
Also having all kinds of fun setting up the account and having it complete the process properly. It tells me it can't connect with the server/it's not available at this time, blah blah blah. Tried just entering the email address and letting the tablet do its thing; have used multiple settings in the Advanced setup, as verified by using the EVAT tool (though it seems to only have PC, not Playbook options). Again, maybe this is just a wifi-only issue(?), but even on wifi setup seems iffy.
Duh

Rogers has different setting for home and mobile use and it can be painful to deal with
Basically they lock it down for one use or the other and not for both.
It was inteneded to be used only with your home PC and not a mobile device and some ISP have made changes to allow it
POP protocol isnt that robust and if possible use IMAP or better to use exchange active sync if possible (not all ISP use IMAP or EAS)
I gave up on it and switched to outlook.com
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/SMTP-server-issue-with-your-...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

WiFi connection problem with WRT120N

Hello,
I'm trying to configure the WiFi on a WRT120N (firmware 1.0.05), but I encountered several problems.
The Internet routing is OK => no problem to have a RJ45 connection.
But when I configured the WiFi, the problems begun...
1) With a laptop Dell XP SP3 (about 6 years old, and working fine with other WiFi networks b/g WPA/WPA2), I can see the SSID, but it is not possible to connect (without security, or with WEP, WPA or WPA2).
2) With 2 different desktops (XP SP3 and Vista SP1) and an USB adapter Linksys Wireless-G, I cannot see the SSID (but I can see other SSID in the neighbourhood).
3) With an Alienware, no problem, I can immediately connect and surf (with or without encryption).
Could you please help me to solve this problem ?
Thanks in advance.

Connect the computer to the router with the Ethernet cable.
Open the setup page of the router. Create a new wireless network.
Click on the wireless tab and set the configuration view to manual.
Keep the network mode on Mixed, change the SSID, standard channel to 11. Save the settings.
Click on wireless security sub tab. Change the security mode to WPA personal and enter the password for the wireless network. Save the settings.
Click on Wireless MAC filter sub tab and make sure that it is disabled.
Click on Advanced wireless settings sub tab. Change the beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.
Now try to connect to the wireless network. See if that works.
if you are not able to see the SSID then try changing the wireless channel on the router.
If that doesn't work then re-flash the firmware on your router. Download the latest firmware from Linksys website and save it on your computer. open the setup page of the router. Click on Administration tab and go to Firmware upgrade sub tab. Browse the firmware file that you have already downloaded and re-flash it on your router.
After upgrading the firmware on the router, it is recommended that you should reset the router and reconfigure it. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait for 10 seconds. Power cycle the router and reconfigure it.

Need advice on Wifi setup

I need some advice on the best wifi setup to use for my house's configuration.
Currently I have cable internet coming in at one end of the house downstairs. I have an Airport Express (circa 2010) connected directly to the cable modem. On the second floor on the complete opposite side of the house is my bedroom/office. I have an Airport Extreme (2011 5th generation) set up to extend the wireless network.
This has worked fine and we have not had any problems connecting any of our wireless devices to the network.
I also have the airport express set up to use dyndns with a domain name I own so that I can remotely access my network at work.
I have just added a new mac mini to the mix to replace an aging and antiquated Windows Home Server. I want to administer all the user's (6 kids) in the house, manage photo and itunes libraries and eventually set up a webserver and allow remote access to our home computers.
So my question is this....is there a better way to configure the airport devices? I would prefer to have the cable modem connected directly to the airport extreme, but then I would be wasting the USB and gigabit ethernet ports as the location of the cable modem is in our living room with no electronic devices in sight. Since my primary connection for my main computer and the new mac mini is through the airport extreme connected wirelessly to the airport express, I am thinking the express could be the bottleneck. Would spending the cash on a 2nd Airport Extreme to replace the Airport Express be beneficial or just a waste of money?
Thanks.
Brian

Yes, I had considered running an etherent cable to the bedroom, but my wife doesn't like the idea of seeing the cable snaking through hallways.
In the bedroom, I have connected the imac, mac mini and the AEBS with etherent cable. It's just my connection to the internet that does not have the benefit of ethernet, although the speed I get from my cable internet is much slower than the wifi connection.
I would eventually like to move the cable modem upstairs and use the AEBS as the primary base station and the AX downstairs to extend my wireless network. However, there is an issue in that the cable modem has to be the only device on the cable connection and I am currently using the cable connection to carry my DISH Network signal and basic cable signal to the bedroom.
I guess my question really boils down to this...Would an AE in place of the AX give a stronger signal to the 2nd AE in the bedroom. I will turn off the AE tonight and see what kind of a signal I get from the AX downstairs. I haven't tried it, but I suppose I could also move the Airport Extreme (5th Gen) downstairs and hook it directly to the cable modem and not even use the AX because the signal from the new AE should be as good or better than last year's AX - but then I would lose the gigabit ethernet between those devices - which is why I haven't done that yet.
I could also drop the $$$ on a Time Capsule for the bedroom and use it for all my backups (but that's kinda what I'm hoping to do with the mac mini) and move the AE downstairs to the cable modem.
Decisions, decisions.

I need to upgrade my 10.5.1 os on my G4/1.25 (I'm having some audio-midi setup problems), but it's a machine that is not connected to the internet. Do I have any options? Thanks!

Friends,
I'm having some audio-midi setup problems on my G4/1.25/10.5.1 machine. I'm thinking that a routine OS upgrade might help. However, this machine is not connected to the internet. Are there any alternate methods for upgrading system software? Thanks in advance!

OK, what you should do is download the updates on another machine and burn them to a disc. Start at this link http://support.apple.com/downloads/#leopard for downloads and find, among other things, the 10.5.8 combo updater that works on PPC machines, plus security, QuickTime and other updates. Going from 10.5.1 to 10.5.8, there will probably be a bunch of things that you should install. Being off the internet with the machine, you can't have Software Update sort it out, so something might get missed, unfortunately.
My suggestion is this: if it looks like you might need a download, get it onto that disc.

I need help with an email WiFi sending problem on my iPad 2

I’m having an email WiFi sending problem on my iPad 2     Model: MC774C/A; IOS VERSION: 6.1.3 (10B329).
While I use 4 email accounts on the iPad -- Hotmail, Gmail, iCloud and ns.sympatico.ca ( a division of BellAliant) – the sending difficulty only relates to the ns.sympatico.ca. The settings for this account are:         pop.bellaliant.net            and      smtp.bellaliant.net
I first noticed the problem about 3 weeks ago while travelling across the country (Canada). (I do recall about that time there was an update of my IOS and I also for my wife purchased from the Bell store an iPhone which shares my Apple account.) Prior to that everything worked well for a couple of years.
I noticed earlier this month that the iPad received mail fine but would not send at night using the motels’ WiFi. During the day, using my 3G account, all worked fine. I phoned Bell but was told that my experience was normal so I thought no more about it until I returned home and found the same problem at the house. I called Bell again and worked for 2 hours with 3 Bell technicians who succeeded in getting the iPad to neither send nor receive and gave up advising me to take the iPad into a Bell store to have it looked at. I did that and the young technician got the iPad sending and receiving by changing the        smtp.bellaliant.net      to         mail.1xbell.ca
However, when I returned home again, I realized that it was working on my 3G and still doesn’t send on my WiFi
I’m looking for any suggestions that might solve this annoying problem?

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

I do not have a home wifi setup. How can I connect my iMac to apple TV?

I do not have a home wifi setup. How can I connect my iMac to apple TV?

you need a wifi connection, it says on this manual
http://manuals.info.apple.com/MANUALS/1000/MA1607/en_US/apple_tv_3rd_gen_setup.p df

HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

You probably can, but this type of configuration is not recommended or supported by Apple.
Two cautions if you want to try this:
1) The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
2) Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule. Two "hops"......even if the computer is located close to the Time Capsule.
If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

Setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

setup problem, windows xp, firefox upgrade to 4 and asked to reboot but did not progress. keeps asking to restart even if I try to remove

Hi marsano,
Usually the only reason it will ask you to reboot is if there is a file that must be modified that the updater doesn't currently have access to. You should try running the Firefox program once as Administrator:
* Right-click the icon and choose ''Run as Administrator''
If that doesn't help then do a clean reinstall.
# Download a fresh copy of Firefox from the [http://www.mozilla.org/firefox/fx/ Mozilla download page] and save the file to the desktop.
# [[Uninstalling Firefox|Uninstall]] your current version of Firefox and remove the Firefox program folder before running the new installer.
# Run installer
Remember that you don't want to remove personal data when uninstalling. That way you'll still have your personal information.
Hopefully this helps!

Using epson 400 air printer have 4th gen ipad was able to find printer and print now unable to find air printer never worked right away but now all I get is notorious printer says wifi setup ok restarted ipad this and that no air printers found do not g

I am using a 4th gen ipad with an epson Xp400 air printer my ipad was able to find printer but now it cannot. Printer says wifi setup ok. Do not understand why it can't find printer. Never did work right away always have to restart ipad or do wifi setup again on the printer. I am not sure whether os is ..1 or.2 or just 6.0

bump... Anyone have any answers?

ITunes 11 wifi sync problem

Hi all,
I just update to iTunes 11, but since than I'm only able to sync my iPad and iPhone with a cable, the wifi sync option is not working. Both of my iDevices won't find my MacBook
Info:
iPad Wifi 3rd Gen
iPhone 5
MacBook Pro 15" (mid 2011)
Hope that anyone has a solution or Apple comes up with a solution

My itunes wasnt recognizing either my or my husbands phones via wifi either, I took the suggestion of others and reconnected to wifi, didnt work. What ended up working for me was going into network preferences on the mac, and than advanced and deleting my network from the list of preferred networks, turning on wifi on my mac, quitting itunes, turning wifi on my mac back on, reconnecting to my network and opening up itunes. Just synced a song to my iphone via wifi no problem. Odd workaround but hopefully that helps you. I am running osx 10.8.2 and my phones are on ios 6.0.1

WiFi (WLAN) problem - in the same room a iOS 5 device connects, iOS 6 not

Hi all,
I won't say that it's a proof for the iOS 6 WiFi/WLAN problem. BUT, it's evident that my iPhone 4 with iOS 5 sees all WLAN-networks and connects - my new iPad with iOS 6 doesn't! And I'm using the two devices in the same room. In addition my new iPad didn't have connection problems before updating to iOS 6.
Apple Software Engineers - please help and release the next update to fix it
Best regards
O.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Has anyone had a problem with TapMedia File Manage on iPhone 5. I reported a WIFI functionality problem to the developer and asked for support. Instead they have been very unprofessional by name calling me instead of logically evaluate and troubleshoot th

Has anyone had a problem with TapMedia File Manage installed on iPhone 5? I reported a WIFI functionality problem to the developer and asked for support. Instead the company has been very unprofessional by name calling me instead of logically evaluate and troubleshoot the problem

Hi AKE1919,
Welcome to the Support Communities!
The following information should help you with this:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933?viewlocale=en_US
Cheers,
Judy

New retina MacBook Pro - WiFi connectivity problems

Dear all,
I've recently purchased the new Haswell 13" retina MBP, and I'm having exactly the same WiFi connectivity problems the 2013 Airs had. I have a solid connection for a short time, and at irregular intervals it just drops out. All of my other devices are still connected and have no problems. I've tried with two different routers/modems, but the problem persists.
Is this a known problem - with hopefully a software fix in the forseeable future, or do I need to return the MacBook?
Many thanks in advance for your help,
Nic

I haven't got a Retina, but I do have the same wifi problem. And if you've looked at these forums, you'll see it's been going on for years and no one seems to have a handle on what the issue is. All I can say is if I were in your place I'd take it back and exchange it. You have the chance now, so take it.

WiFi Setup problems

Similar Messages

Maybe you are looking for