Wifi sync stops before it's finished

Trying to sync a large library over wifi on a new iPad, but it never completes the sync. A few hundred songs will sync ok, and the next time I look at the iPad I notice that it has stopped syncing. PC is set to stay awake indefinitely. Any ideas what may be causing it to time out?

"Shaoul Dotan" writes:
> It's possible to stop for loop in the middle of an operation.
>
> T.U.
Shaoul,
as others explained why it's a bad thing, here is a very ugly trick to
acomplish something of it. It's so ugly I won't use it in my programs.
I'll assume you do something with an array in your for loop. To "stop"
the loop you can use a case structure with 2 cases: one empty and the
other with a huge delay (e. g. 40 days). To get the data out of the
for loop you have to use a local variable for the whole array so you
need to work with shift registers and "append to array".
The way to reintroduce data dependency outside the for loop is by
polling the array size of the local variable. If it didn't grow for
e. g. 100 ms the for loop is "
finished" and in the delay state.
The downside of this trick is that the vi doesn't finish and you have
to abort it.
Does someone in this group know about the obfuscated C contest, where
you try to write C code that noone can understand? What about doing
something like that in G? We have some guidelines how to wire; the
contest could reveal ways how _not_ to it.
Johannes Niess

Similar Messages

  • Songs are stopping before they are finished

    My songs are stopping before they are finished playing. Using a PC.  Help.

    I have the same problem with a couple of songs I've just bought on itunes

  • ICal updates syncs event before I can finish editing it

    When I create a new iCal event, it automatically syncs- even before I can typically add a correct time, location, etc.
    This would be fine, except for the fact that people I share a calendar with then get multiple notifications for the same event (when created, and when edited with the final event info)
    Is there a way to stop it from pushing this to the cloud before I'm done editing a new event?

    This is incredibly frustrating for me too!
    I have a repeated monthly event for a discount at a store that is offered on the first Tuesday of every month. So I have a repeated event taking place on the 1st of every month. In the previous month I reset next month's date from the 1st to whatever date falls on the first Tuesday.
    But ever since upgrading to Yosemite, I am experiencing the same problem as the original person who posted. The date saves on my calendar but does not sync to my iCloud. When I reboot the computer, the date reverts back to the 1st.
    I'm thankful I don't have any events that needed to be tracked because ALL of my previous changes in the past have reverted back to the 1st of the month. I would have been in the same terrible situation as yaz999 in having to manually change every event in previous months.
    Why hasn't this bug been fixed yet???!!!

  • WiFi Sync stops half way

    On top of the more general issues with WiFi sync where stuff just vanishes from iTunes I've also had many instances where my iPhone will just vanish half way through a sync.
    I have the phone plugged in, not moving, a full WiFi signal yet I'll get a message in iTunes saying something like 'XYZ could not be copied to your iPhone because it is no longer connected' or something like that.
    Sure enough, the iPhone is now vanished from the sidebar.  ARRRRRGGGGGG Soooo many problems with this phone.

    I've had this same problem with my iPad. I'm afraid I've lost a significant amount of app data. Any ideas, anyone?

  • Two users accounts, WiFi sync stopped working

    Hi,
    I've just set up my MacBook with two user accounts, and set up iTunes within each user account to use the same library from a shared folder (as per the instrcutions on Apple support).
    The idea is that the first iPhone and iPad syncs to the administrators iTunes, and the second iPhone syncs to the second user's iTunes.
    The second users iPhone never worked with WiFi sync, the first user's iPhone used to WiFi sync, but now doesn't. The iPad still syncs ok with the adminstarors account.
    By "not syncing", I mean not appearing as a device in itunes without being atached with a cable. Everything works as intended with a cable.
    I've tried initiating the sync from the iPhones themselves, without any success.
    Can anybody help?
    Cheers.

    Don't know the solution (I don't use wifi sync) but thought I'd mention that -50 is a timeout error.  Maybe someone else here has an idea.

  • IPad & iPhone wifi sync stopped working

    It's been since I upgraded my iPad 2 and iPhone 4 to 5.0.1 that I cannot wifi sync my devices.
    I have a 2006 White MacBook with OS X 10.6.8, both iDevices upgraded to 5.0.1, last itunes version. My router is a linksys WRT54GL with the latest original firmware. Wifi security is WPA2 personal, TKIP+AES. OSX firewall is set to off.  I am an IT engineer.
    I have searched over net and looked for possible solutions here, so these are the procedures I tried:
    restarting my mac, iDevices, and router
    updating firmware on my linksys router to the latest available
    turned off iphone while trying to see if itunes detects the ipad
    renew the dhcp lease on the ipad, and macbook
    set a static IP both for mac and ipad
    disconnect permanently the ipad from the router's wifi, then reconnect to it typing the password
    switch off both ipad and mac wifi.
    Remote app IS indeed working to control iTunes
    disable router's multicast filter: when I did this, my roommate, who has a win7 pc and an ipad2, was able to see its ipad in itunes, and he successfully synced
    disable router firewall
    create a custom wifi network with my macbook and connect only the ipad to it
    changing wifi channel
    set up port forwarding rules for TCP:123, 3689, UDP:123, 5353 to my mac static dhcp ip address
    using another network @ work
    I'm running out of creativity... This problem must rely on apple side, since my roommate can sync wirelessly.
    And since his ipad is working, there must be something wrong with itunes for mac, or in the way ipads interact with Macs.
    The wifi sync DID work while on iOS 5.0.0, it all started after upgrading.
    In any case I will not restore any of my devices, since it is not a problem caused by me.
    Please Apple, fix this!  Let me know if you need any logs.
    Thanks,
    Riccardo

    I looked into the Console to see what is going on.
    This is what I found showing up when I set airplane mode off, and the ipad was set to sync wirelessly:
    Dec  5 03:15:03 MacBook-Chicchi-2-Ghz com.apple.usbmuxd[21]: _SendAttachNotification (thread 0x7fff7105acc0): sending attach for device 58:1f:**:**:**:**@fe80::****:****:****:****._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
    Dec  5 03:15:03 MacBook-2-Ghz com.apple.usbmuxd[21]: MuxNetworkInitiateConnect Client 0x10032c240-usbmuxd/NULL requesting attach to 4a2287ed14eef1769380582d13288cfd930f67a0:62078 failed, could not begin background connection attempt: -1
    Dec  5 03:15:03 MacBook-2-Ghz com.apple.usbmuxd[21]: HandleUSBMuxConnect Client 0x10032c240-usbmuxd/NULL MuxNetworkInitiateConnect failed
    Dec  5 03:15:03 MacBook-2-Ghz usbmuxd[21]: AMDeviceConnect (thread 0x102404000): Could not connect to lockdown port (62078) on device 31 - 4a2287ed14eef1769380582d13288cfd930f67a0: 0xe800006b.
    Dec  5 03:15:03 MacBook-2-Ghz usbmuxd[21]: _AMDevicePreflightWorker (thread 0x102404000): Pair worker could not connect to lockdownd on device 31: 0xe800006b.
    Dec  5 03:15:03 MacBook-2-Ghz com.apple.usbmuxd[21]: HandleDeviceAttachHelperCallback preflighting failed for WiFi device 0x1f-192.168.2.202:0: 0xe800006b. Ignoring device.

  • ITunes wifi Sync stopped working

    It's been since I upgraded my iPad 2 and iPhone 4 to 5.0.1 that I cannot wifi sync my devices.
    I have a 2006 White MacBook with OS X 10.6.8, both iDevices upgraded to 5.0.1, last itunes version. My router is a linksys WRT54GL with the latest original firmware. Wifi security is WPA2 personal, TKIP+AES. OSX firewall is set to off.  I am an IT engineer.
    I have searched over net and looked for possible solutions here, so these are the procedures I tried:
    restarting my mac, iDevices, and router
    updating firmware on my linksys router to the latest available
    turned off iphone while trying to see if itunes detects the ipad
    renew the dhcp lease on the ipad, and macbook
    set a static IP both for mac and ipad
    disconnect permanently the ipad from the router's wifi, then reconnect to it typing the password
    switch off both ipad and mac wifi.
    Remote app IS indeed working to control iTunes
    disable router's multicast filter: when I did this, my roommate, who has a win7 pc and an ipad2, was able to see its ipad in itunes, and he successfully synced
    disable router firewall
    create a custom wifi network with my macbook and connect only the ipad to it
    changing wifi channel
    set up port forwarding rules for TCP:123, 3689, UDP:123, 5353 to my mac static dhcp ip address
    I'm running out of creativity... This problem must rely on apple side, since my roommate can sync wirelessly.
    And since his ipad is working, there must be something wrong with itunes for mac, or in the way ipads interact with Macs.
    The wifi sync DID work while on iOS 5.0.0, it all started after upgrading. 
    In any case I will not restore any of my devices, since it is not a problem caused by me.
    Please Apple, fix this!  Let me know if you need any logs.
    Thanks,
    Riccardo

    I looked into the Console to see what is going on.
    This is what I found showing up when I set airplane mode off, and the ipad was set to sync wirelessly:
    Dec  5 03:15:03 MacBook-Chicchi-2-Ghz com.apple.usbmuxd[21]: _SendAttachNotification (thread 0x7fff7105acc0): sending attach for device 58:1f:**:**:**:**@fe80::****:****:****:****._apple-mobdev._tcp.local.: _GetAddrInfoReplyReceivedCallback matched.
    Dec  5 03:15:03 MacBook-2-Ghz com.apple.usbmuxd[21]: MuxNetworkInitiateConnect Client 0x10032c240-usbmuxd/NULL requesting attach to 4a2287ed14eef1769380582d13288cfd930f67a0:62078 failed, could not begin background connection attempt: -1
    Dec  5 03:15:03 MacBook-2-Ghz com.apple.usbmuxd[21]: HandleUSBMuxConnect Client 0x10032c240-usbmuxd/NULL MuxNetworkInitiateConnect failed
    Dec  5 03:15:03 MacBook-2-Ghz usbmuxd[21]: AMDeviceConnect (thread 0x102404000): Could not connect to lockdown port (62078) on device 31 - 4a2287ed14eef1769380582d13288cfd930f67a0: 0xe800006b.
    Dec  5 03:15:03 MacBook-2-Ghz usbmuxd[21]: _AMDevicePreflightWorker (thread 0x102404000): Pair worker could not connect to lockdownd on device 31: 0xe800006b.
    Dec  5 03:15:03 MacBook-2-Ghz com.apple.usbmuxd[21]: HandleDeviceAttachHelperCallback preflighting failed for WiFi device 0x1f-192.168.2.202:0: 0xe800006b. Ignoring device.

  • Syncing Stops before all songs are added

    When I sync my iPod using iTunes 8.0, for some reason the syncing process stops and ejects my iPod before my entire library is added. Can someone help me with this? I have to sync it about 10 times before 90% of my songs are added but even then I don't get them all.
    Thank you.

    With what you have already done, it seems most likely to be a iTunes issue. You might want to go through a reinstall of iTunes. Here are directions to do that:
    http://www.apple.com/support/itunes/
    You can select to reinstall iTunes on the page above and you can get full instructions.
    i

  • While loop stops before countdown has finished

    Hello everyone
    I have a problem with this scenario:
    What I want is, that I can enter a series of arrays and then it will choose the first row because the first cycle number is 0, the second is 1 and so on. I want this loop to continue until I've left my arrays empty. The probelm is when I test it, it immediately stops, but when I highlight everything seems to work fine.
    This is a program I'm trying to write so it can control some dosing pumps - I put in a number and weight and then it converts it into a set point % which will trigger the pumps. When the countdown is finished then it should start dosing with the next weight and time.
    I'm fairly new to labVIEW. I've tried looking everywhere but I haven't found that could help me, I count on you!
    Thank you very much
    Theis
    Solved!
    Go to Solution.
    Attachments:
    TabelTEST2.vi ‏32 KB

    Thank you very much all of you! It almost works!
    I must say that you guys put a lot of effort into helping me, I'm grateful.
    I went with this solution:
    I added the "stop 2" button, which starts everything.
    I just have a slight problem. When I want to pause I press the stop button again and it pauses. When I start again - by pressing the stop button - it resumes but I can see that it kept counting seconds while it was pause. I guess, that what I want is, that when I pause that it sends a zero signal to the pump which tells it to stop and the same with the timer. And when I start I want it to resume. Ya' follow me?
    I hope any of you guys, who have already been so helpful, can help!
    Thank you
    Theis
    Attachments:
    TabelTEST2_MOD.vi ‏36 KB

  • Music stops before song is finished

    Help,
    On my itunes, I will be listening to music and before the song is supposed to be over it will just jump to the next song, Typically the song will have over a minute left and then just jump to next song in the playlist. I have hundreds of songs doing this and i do not know how to fix this.
    Running current version of Itunes
    Everything is up to date.
    Thank You,

    All of the songs were purchased from iTunes. The new unit is  stopping songs that were problematic on the old unit (songs that were purchased 2 years or more ago) and is now stopping on some more recently purchased songs.
    I just went back into iTunes and tried to play one of the involved songs on the laptop through iTunes. I rec'd the following message: "The song "xxxxxxxxx" could not be used because the original file could not be located. Would you like to locate it?" This is the 1st time I've ever rec'd this message and I receive it when I try to play any song from any playlist. I clicked on "Locate" I was taken to the System 32 file. I originally had iTunes on a desk top computer and transferred it over to my new laptop approx 6-7 months ago. Did something go wrong with the transfer?
    Mary

  • Problems downloading OS Lion. Unfortunately the Download always stops before it has finished. Time 1 hour already, problems downloading OS Lion. Unfortunately the Download always stops before it has finished. Time 1 hour already

    I want to download the new OS lion (first time) but the download already stopped twice. Saying download not possible. It took already more than an hour till the download stopped. Anyone has an idea what the reason might be?

    yes you would have to log onto her computer using your own apple id if you want it to update (assuming your id was the one downloading lion) and no for the second question. The itunes Representative said it shouldn't have any impact on your purchasing ability.....
    By the way, i don't think you're allowed to install lion on your friend's computer. Unless you are using it for yourself. As the rep said "if there was some personal use well then it would meet the conditions." so if you were to transfer, say, pictures for storage on your friend's computer then i think it'd be fine.

  • Wifi Sync with iTunes has stopped working

    I have a MacBook Pro running on 10.7.2 and have iTunes 10.5.
    My iPhone 4 has recently stopped wifi sync with iTunes on my MacBook Pro , the device only shows in Itunes when i sync via the cable.
    I have reinstalled iTunes 10.5 on my Mac and have restored my I phone's software and firmware to no avail.
    Does anyone have an answer??

    Do you have the ACE Mega CoDecS pack installed? I saw that as the problem somewhere, and uninstalled it and that took care of the problem. I had just re-installed before having that problem and had every single codec installed rather than just installing a certain filter that I was needing and it was affecting Quicktime, which in turn was affecting iTunes.

  • Song stops before finishing playing in ITunes and skips to next song

    I'm using ITunes on a Windows Vista 64-bit system. Occasionally, when a song is playing, it will stop before it finishes and skip to the next song. It seems to only happen with certain songs though. Very strange. Didn't happen in the past. Is it a bug in Itunes? Any ideas??

    This is really getting annoying. I'm on the verge of giving up on iTunes, or at least giving up on iTunes 8. The first rule of business is to make it easy for your customers to give you money. iTunes Store is a classic example of that. The second rule of business is not to p*ss off your customers. Looks like Apple is falling down on this one.
    New information since my last rant. I have another computer running iTunes 7.6.0.29. Songs that do not play to completion on iTunes 8, play just fine on this older version of iTunes.
    Worse, this problem has infected my wife's iPod. Songs that iTunes 8 does not finish playing also do not finish playing on my wife's iPod Classic (Model MB029LL, Version 1.1.2 PC). The same bug appears to be in newer iPod software.
    I have an old 20GB iPod Click Wheel (Version 3.1.1). The same song that fails to play properly on iTunes and the iPod Classic plays just fine on my iPod Click Wheel.
    This problem (at least my problem) is obviously a regression. Apple please fix it!

  • ITunes Wifi sync has stopped working

    iTunes has stopped syncing over wifi with my iPhone 5S and iPad Mini. It's always been a bit flaky, but has recently stopped working completely. iTunes will not see the devices unless I either reboot them, or plug them in with the Thunderbolt cable, deselect and select "sync with this device over wifi" and apply. If I try to use wifi sync, iTunes gives me a "looking for device" message and then drops the connection.
    My set up is a Mac Pro running 10.10, hooked up to an Airport Express via Cat 6. Both iOS devices are on iOS 8.
    I have tried changing the IPV6 settings on both my machine and my Airport Express, resetting the network settings on both iOS devices, and flushing my machine's DNS cache.
    I see the following messages repeated in my system log:
    10/17/14 10:51:03.004 PM iTunes[2424]: Entered:_AMMuxedDeviceDisconnected, mux-device:1
    10/17/14 10:51:03.004 PM iTunes[2424]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:1
    10/17/14 10:51:03.005 PM iTunes[2424]: tid:244b - BootedOS mode device disconnected
    10/17/14 10:51:07.123 PM iTunes[2424]: Entered:_AMMuxedVersion2DeviceConnected, mux-device:2
    10/17/14 10:51:07.140 PM iTunes[2424]: tid:244b - unable to query device capabilities
    10/19/14 3:32:41.583 AM com.apple.usbmuxd[56]: HandleUSBMuxConnect Client 0x103c017d0-AppleMobileDeviceHelper/com.apple.SyncServices.AppleMobileDeviceHel per requesting attach to 0x4:62078 failed, no such device
    10/19/14 3:32:41.583 AM AppleMobileDeviceHelper[15815]: AMDeviceConnect (thread 0x7fff74ccd300): Could not connect to lockdown port (62078) on device 4 - cda9592d30dad5b13a61189fdc7d7abebcb71eca: 0xe8000084.
    10/19/14 3:32:41.660 AM AppleMobileDeviceHelper[15815]: 15815:1959580416|DeviceLinkListener.c:_copyMobileDeviceValue| ERROR: Could not connect to attached device: This device is no longer connected. (132)
    10/19/14 3:32:41.660 AM AppleMobileDeviceHelper[15815]: 15815:1959580416|DeviceLinkListener.c:_setMobileDeviceValue| ERROR: Could not connect to attached device: This device is no longer connected. (132)
    10/19/14 3:32:41.661 AM AppleMobileDeviceHelper[15815]: 15815:1959580416|AppleMobileDeviceHelper.m:_setTetheredSyncLockdownInfoForTarge t| ERROR: Could not set tethered sync info ({
        SyncingOS = iPhone;
    }) in lockdown for com.apple.Bookmarks (Bookmarks): -402653052
    10/20/14 12:16:38.119 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 1
    10/20/14 12:16:38.119 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 2
    10/20/14 12:16:38.119 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 3
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 4
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 5
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 6
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 7
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 8
    10/20/14 12:16:38.120 AM discoveryd[53]: Basic Bonjour set up wake on resolve to b8:e8:56:cd:bb:10 on interface 9
    10/20/14 12:26:50.255 AM iTunes[15786]: clip: empty path.
    10/20/14 12:26:50.287 AM iTunes[15786]: clip: empty path.
    10/20/14 12:26:50.334 AM iTunes[15786]: clip: empty path.
    10/20/14 9:11:27.248 AM com.apple.usbmuxd[56]: _SendAttachNotification Device b8:e8:56:cd:bb:10@fe80::bae8:56ff:fecd:bb10._apple-mobdev2._tcp.local. has already appeared on interface 4. Suppressing duplicate attach notification.
    10/20/14 9:11:29.048 AM iTunes[15786]: Entered:_AMMuxedDeviceDisconnected, mux-device:47
    10/20/14 9:11:29.048 AM iTunes[15786]: Entered:__thr_AMMuxedDeviceDisconnected, mux-device:47
    10/20/14 9:11:29.048 AM iTunes[15786]: tid:17e3f - Mux ID not found in mapping dictionary
    b8:e8:56:cd:bb:10 is the wifi address of my iPhone.

    Hi littlejimmym!
    I have an article here for you that will help you troubleshoot this issue:
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
    http://support.apple.com/kb/ts4062
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • In random mode i tunes stops some songs before they are finished.  How do I fix that?

    In random mode, itunes stops some songs before they are finished.  How do I change the ending point of a song in itunes?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

Maybe you are looking for