Wiki icons broken after last upgrade?

Has anyone noticed that the wiki icons after the last update 10.7.2 are broken?
I just did a remote upgrade and noticed the links are now broken on the wiki pages.. I'll troubleshoot it from an apache perspective later tonight, but I was just curious as to if anyone else has run into this anomaly..

So after getting home from a business trip yesterday, I decided to look into this.. I found that screen sharing was also not working.
I rebooted the server and screen sharing started working again, as well as the icons are now also being displayed properly in the wiki's. I wanted to get screen sharing working first as the server is in the basement, and I'd rather sit at my desk to troubleshoot (Simply restarting screen sharing did not fix that problem)
If it happens again, I'll troubleshoot before rebooting.

Similar Messages

[SOLVED] Unable to boot after last upgrade [HP Smart Array]

Hello guys.
After last upgrade I'm unable to boot. I have fileserver with 2 discs in HP Smart Array RAID 1.
While booting, kernel is unable to find my raid (should be cciss) and therefore lvm2 hook fails to find root partition. While going into recovery, I can chroot without an issue, lsmod shows that cciss driver is properly loaded, disk exits in /dev/cciss/, logical group and volumes are detected properly.
No matter what I do, I just can't get cciss module into kernel. Putting in MODULES in mkinitcpio.conf's MODULES="" didn't help. I'm listing my initramfs images and there is no cciss.ko. I'm also searching for module in my filesystem and can not find it.
Any help will be appreciated.
Last edited by edke (2012-06-04 10:39:20)

Thank you for your quick reply.
DSpider wrote:First of all, have you tried the Fallback entry? Because initramfs-linux-fallback.img is supposed to have a full range of modules.
Of course, no change.
DSpider wrote:
Second, after editing /etc/mkinitcpio.conf you need to regenerate your initramfs.
# mkinitcpio -p linux
But the MODULES section needs to have something in there...
Here's mine:
MODULES="pata_amd sata_nv ehci-hcd ohci-hcd ext2 ext3 ext4 vfat snd-hda-intel"
You probably need "mdadm" or "mdadm_udev" in there too, I'm not sure... I don't use RAID, but maybe these will help:
https://wiki.archlinux.org/index.php/Mk … Using_RAID
https://wiki.archlinux.org/index.php/So … ID_and_LVM
HP Smart Array is hardware RAID, therefore I don't need mdadm. Right module should be cciss, but this is somehow not working. Adding this into MODULES does not add cciss module to image.
When I'm booting from Arch install for recovery and chroot, cciss is loaded and my HP Smart Array disk is visible.

[NEARLY SOLVED] font rendering in gtk apps problem after last upgrade

Im' using KDE, cairo-lcd, libxft-lcd... my fonts looked beautifully, but now they look horrible...
After last upgrade my gtk apps (firefox, thunderbird) render fonts in an ugly way...
I've tried to revert to pango 1.16.5 with no lucky result (the same problem)...
here is the log:
[2007-08-19 14:56] upgraded bind (9.4.1_P1-2 -> 9.4.1_P1-3)
[2007-08-19 14:56] upgraded glib2 (2.14.0-2 -> 2.14.0-3)
[2007-08-19 14:56] upgraded gnupg2 (2.0.5-1 -> 2.0.6-1)
[2007-08-19 14:57] upgraded gtk2 (2.10.14-2 -> 2.10.14-3)
[2007-08-19 14:57] upgraded kernel26ck (2.6.22.2.ck1-1 -> 2.6.22.3.ck1-1)
[2007-08-19 14:57] upgraded libdownload (1.1-1 -> 1.1-2)
[2007-08-19 14:57] upgraded libevent (1.3b-1 -> 1.3d-1)
[2007-08-19 14:57] upgraded libxtst (1.0.2-1 -> 1.0.3-1)
[2007-08-19 14:57] upgraded nvidia-ck (100.14.11-2 -> 100.14.11-3)
[2007-08-19 14:57] upgraded sip (4.6-1 -> 4.7-1)
[2007-08-19 14:57] upgraded pyqt (3.17.2-1 -> 3.17.3-1)
[2007-08-19 14:57] upgraded xf86-input-joystick (1.2.2-1 -> 1.2.3-1)
[2007-08-19 14:57] upgraded xorg-server-utils (1.0.4-1 -> 1.0.4-2)
[2007-08-19 14:57] upgraded xorg-utils (1.0.2-2 -> 1.0.2-4)
[2007-08-19 14:57] upgraded xorg-xdm (1.1.5-1 -> 1.1.6-1)
[2007-08-19 14:57] upgraded xterm (225-1 -> 229-1)
[2007-08-21 00:16] upgraded cpio (2.8-1 -> 2.9-1)
[2007-08-21 00:16] upgraded ed (0.5-3 -> 0.8-1)
[2007-08-21 00:16] upgraded initscripts (2007.08-1 -> 2007.08-2)
[2007-08-21 00:16] upgraded intltool (0.36.0-1 -> 0.36.1-1)
[2007-08-21 00:16] upgraded libarchive (2.2.5-1 -> 2.2.6-1)
[2007-08-21 00:16] upgraded man-pages (2.60-1 -> 2.64-1)
[2007-08-21 00:16] upgraded pciutils (2.2.4-2 -> 2.2.6-1)
[2007-08-21 00:16] upgraded readline (5.2-2 -> 5.2-3)
[2007-08-22 00:16] upgraded gdbm (1.8.3-3 -> 1.8.3-4)
[2007-08-22 00:17] upgraded kernel26 (2.6.22.3-1 -> 2.6.22.4-2)
[2007-08-22 00:17] upgraded lcms (1.16-1 -> 1.17-1)
[2007-08-22 00:17] upgraded libice (1.0.2-1 -> 1.0.4-1)
[2007-08-22 00:17] upgraded libxrender (0.9.2-1 -> 0.9.3-1)
[2007-08-22 00:17] upgraded procinfo (18-3 -> 19-1)
[2007-08-22 00:17] upgraded xorg-apps (1.0.2-4 -> 1.0.3-1)
[2007-08-22 23:49] upgraded kernel26 (2.6.22.4-2 -> 2.6.22.4-2.1)
[2007-08-22 23:49] upgraded librsvg (2.18.0-1 -> 2.18.1-1)
[2007-08-22 23:49] upgraded libxpm (3.5.6-1 -> 3.5.7-1)
[2007-08-22 23:49] upgraded libxaw (1.0.3-1 -> 1.0.4-1)
[2007-08-22 23:49] upgraded makedev (3.8.3-1 -> 3.23-1)
[2007-08-22 23:49] upgraded mcpp (2.6-1 -> 2.6.4-1)
[2007-08-22 23:49] upgraded naim (0.11.8.2.1-1 -> 0.11.8.3.1-1)
[2007-08-22 23:49] upgraded nfs-utils (1.0.12-2 -> 1.0.12-3)
[2007-08-22 23:49] upgraded pam (0.81-4 -> 0.99.8.1-3.1)
[2007-08-22 23:49] upgraded pango (1.16.5-1 -> 1.18.0-1)
[2007-08-22 23:49] upgraded sox (13.0.0-1 -> 13.0.0-2)
[2007-08-22 23:49] upgraded xorg-apps (1.0.3-1 -> 1.0.3-2)
[2007-08-22 23:49] upgraded xtrans (1.0.3-1 -> 1.0.4-1)
[2007-08-25 15:25] upgraded glibc (2.6.1-1 -> 2.6.1-2)
[2007-08-25 15:25] upgraded bftpd (1.9-1 -> 2.0-1)
[2007-08-25 15:25] upgraded gcc (4.2.1-3 -> 4.2.1-3.1)
[2007-08-25 15:25] upgraded gtk-doc (1.8-2 -> 1.8-3)
[2007-08-25 15:25] upgraded hal-info (0.20070618-1 -> 0.20070725-1)
[2007-08-25 15:25] upgraded perl-xml-simple (2.16-2 -> 2.18-1)
[2007-08-25 15:25] upgraded icon-naming-utils (0.8.2-2 -> 0.8.5-1)
[2007-08-25 15:26] upgraded kernel26 (2.6.22.4-2.1 -> 2.6.22.5-1)
[2007-08-25 15:27] upgraded kernel26ck (2.6.22.3.ck1-1 -> 2.6.22.5.ck1-1)
[2007-08-25 15:27] upgraded libgnomeprint (2.18.0-1 -> 2.18.1-1)
[2007-08-25 22:41] removed libgnomeprintui (2.18.0-1)
[2007-08-25 22:41] removed libgnomeprint (2.18.1-1)
i dunno what happened...
plz, someone help me
regards
Last edited by saneone (2007-08-30 18:11:32)

Bogart wrote:
I think the spacing now is correct, while before it was wrong. The only "problem" is that you got used to a bad font rendering, and now that it has changed for better you feel like it's different and don't like it.
Really, *most* of the problems that people find in Linux's fonts are just because they are used to the awful default fonts from Windows XP. Yes, people can even get used to those fonts and believe they're good!!! And when they see correct fonts in Linux they think they're bad...
What I would do is remove the MS TTF fonts. They work bad in Windows and worse in Linux. You should use Bitstream Vera or DejaVu if you want good quality fonts (especially in web pages).
But, then again, you might think that they look wrong just because you're not used to it... Oh, well...
What does correct font / correct spacing mean ?
IMO, that doesn't make any sense, because that's a totally subjective matter, like many other things in this world.
BTW, I love how fonts look in Windows, and I think that must be the only thing MS got right. Thus, I'm using ms fonts in linux, and a rendering as close as possible (no autohinting or antialiasing or subpixel rendering).
Similarly, I could find a woman beautiful that you would find ugly or just average. We are all different, and it's better that way

Startdict crashes after last upgrade

Startdict crashes after last upgrade
$ stardict
XDXF data parsing plug-in loaded.
HTML data parsing plug-in loaded.
Dict.cn plug-in loaded.
Man plug-in loaded.
PowerWord data parsing plug-in loaded.
WordNet data parsing plug-in loaded.
Spelling plugin loaded.
Wiki data parsing plug-in loaded.
QQWry plug-in loaded.
WordNet dict rendering plug-in loaded.
bookname: slovnyk_en-pl, wordcount 15424
bookname: slovnyk_pl-en, wordcount 20087
bookname: StarDict dictionary, wordcount 9
[warning] Binding '<Ctrl><Alt>x' failed! Already assigned.
(Gdk) [critical] IA__gdk_window_set_cursor: assertion `GDK_IS_WINDOW (window)' failed
ERROR:compositelookup.cpp:34:void CompositeLookup::send_net_dict_request(const std::string&, const std::string&): assertion failed: (NetDictRequests.end() == std::find(NetDictRequests.begin(), NetDictRequests.end(), request))

Maybe (because of occurrences of NetDictRequests) it is caused by internet modules which you don't have to need. I use just my local dictionaries and my ~/.stardict/stardict.cfg looks like:
[stardict-private]
version=1.0
[/apps/stardict/manage_dictionaries]
dict_order_list=/usr/share/stardict/dic/quick_italian-english.ifo/usr/share/stardict/dic/encz.ifo/usr/share/stardict/dic/czen.ifo/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo
dict_config_xml=<dictgroup name="Default Group"><querydict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></querydict><scandict><localdict enable="true" file="/usr/share/stardict/dic/quick_italian-english.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/encz.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/czen.ifo"/><localdict enable="true" file="/usr/share/stardict/dic/stardict-dict/stardict-dict.ifo"/></scandict></dictgroup>
dict_default_group=Default Group
[/apps/stardict/preferences/dictionary]
only_scan_while_modifier_key=true
use_scan_hotkey=false
enable_sound_event=false
[/apps/stardict/preferences/network]
enable_netdict=false
[/apps/stardict/preferences/main_window]
hide_on_startup=true
search_website_list=
window_width=680
window_height=359
hpaned_pos=114
(Well, there are some strange symbols after ".ifo"s on "dict_order_list=" line, they couldn't be pasted.)
Internet (mainly those Chinese) modules are really unusable for me, so the first thing I do when I install StarDict is I delete all occurrences of <virtualdict ... /> and <netdict ... /> in the configuration file. Maybe it will help you too if you keep just <localdict ... /> items.
There's other thing that bothers me now with StarDict - RealPeopleTTS works fine with the version 3.0.1-3 but hesitates to with the up-to-date version 3.0.2-2.
Last edited by nemamradfazole (2011-01-23 01:33:27)

I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

I am going on the guess that an old driver is still installed...
Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
Reset the Printing System:
OS X Mavericks: Reset the printing system
Now, Add the printer in Print & Scan prefs.

I tunes is missing after last upgrade help! Please

After last upgrade I noticed ITunes App is not on iPad. How do I get it back? I tried to download it again but all I get is it comes loaded on iPad. Can anyone help me. Thank you

Home Screen: Missing App Store, FaceTime, iTunes or Other Icon

After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I fix?

After last upgrade Apple TV 3 blue dots not disappearing after podcast is watched. How do I get them to disappear like they always have?

That crash appears to be casued by the Facebook plug-in.
Create a new account (systempreferences -> accounts or Users & Groups on 10.7 and 10.8), make a new Library in that account, import some shots and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.

YouTube icon missing after ios6 upgrade

YouTube icon missing after ios6 upgrade

D-fest,
I was upset about the YouTube app as well, and my initial impressions were that the Apple YouTube app was better, but after using it a bit I realized the Google YouTube app was actually better. Some of the features are initially not obvious (in this case it was a matter of what I was used to), but they are all there and more. It seems to generally work better too.
I don't stream an awful lot, but I have not experienced any wifi drops while doing so yet.
doug

[SOLVED] nfsroot install broken after kernel upgrade 3.5.6 to 3.6.2

It seems my nfsroot installations have broken after the kernel upgrade to 3.6.2.
This is as far as the boot process gets now (hand copied from the screen):
IP-Config: eth0 complete (from 10.48.50.20):
address: 10.48.50.240 broadcast: 10.48.50.255 netmask: 255.255.255.0
gateway: 0.0.0.0 dns0 : 0.0.0.0 dns1: 0.0.0.0
domain : local
rootserver: 10.48.50.20 rootpath:
filename : /var/tftpboot/pxelinux.0
NFS-Mount: 10.48.50.20:/srv/nfs4/kvmhost0-rootfs
Waiting 10 seconds for device /dev/nfs ...
mount: Protocol not supported
:: running cleanup hook [udev]
ERROR: Failed to mount the real root device.
Bailing out, you are on your own. Good luck.
sh: can't access tty; job control turned off
[rootfs /]#
On the server this is what is logged:
Oct 16 21:10:04 tuon dhcpd: DHCPDISCOVER from 00:21:70:eb:02:25 via san
Oct 16 21:10:04 tuon dhcpd: DHCPOFFER on 10.48.50.240 to 00:21:70:eb:02:25 via san
Oct 16 21:10:04 tuon dhcpd: DHCPREQUEST for 10.48.50.240 (10.48.50.20) from 00:21:70:eb:02:25 via san
Oct 16 21:10:04 tuon dhcpd: DHCPACK on 10.48.50.240 to 00:21:70:eb:02:25 via san
Oct 16 21:10:14 tuon rpc.mountd[1323]: authenticated mount request from 10.48.50.240:684 for /srv/nfs4/kvmhost0-rootfs (/srv/nfs4/kvmhost0-rootfs)
Oct 16 21:10:14 tuon rpc.mountd[1323]: refused unmount request from 10.48.50.240 for /new_root (/): not exported
It looks to me like the client is sending the mount request, the server accepts and then for some reason the client thinks it has failed. I can't even see anything strange in the wireshark traces comparing the working client (3.5.6) to the broken one (3.6.2).
Anyone else using nfsroot successfully with the latest kernel?
Any other ideas?
(by the way - despite my directory names, this is using nfs v3 for the rootfs)
Last edited by kmshanah (2012-10-18 03:18:07)

mikep wrote:
Just to confirm that I also have this problem with nfsroot (nfs4 this time) with 3.6.2. Downgrading the kernel does make it go away.
When it is working normally I do seem to get refused unmount messages at shutdown for some reason
refused unmount request from 192.168.1.86 for / (/): not exported
, but the /new_root bit is new and I have no idea where it comes from.
refused unmount request from 192.168.1.86 for /new_root (/): not exported
So I wonder if it asking for the wrong path.
That unmount issue will be solved by FS#32021.
Unfortunately, that doesn't help with mounting in the first place with 3.6.2

Displaying bash-3.2$ in terminal [NOT-SOLVED after last upgrade]

hello, I have this same problem: http://bbs.archlinux.org/viewtopic.php?id=39192 but the "solution" posted there does not help me at all, I wish I could reuse the old thread but the 'SOLVED' keyword in the title may be confusing so I'm starting a new one.
the problem is that the prompt of my terminals (konsole, yakuake, xterm) is PS1='\s-\v\$ ' in all users; this started to happen after the last upgrade when the profile mechanism was changed somehow, I have no PS1 in my .bashrc and the PS1 in profile.bash is PS1='[\u@\h:\w]\n\$ '.
an interesting thing to know is that the virtual consoles (the ones accessed with Ctrl+Alt+F[1-6]) have the right prompt, and sourcing /etc/profile also fixes the problem on the others so I'm guessing that some other configuration file (possibly KDE or X related) is overwriting my prompt but I can't find it! fgrep -R 'PS1' /etc/profile* only shows the one I set not the wrong one.
/etc/profile and /etc/profile.bash are being loaded since the other declarations are present as well when running `set` only PS1 has changed it's value.
any help is appreciated.

still searching, first of all some tests I've made with the help of the guys at #bash
[11:33] <`Samus_> guys is it possible that starting X somehow erases my prompt?
[11:33] <`Samus_> I know that's is not purely bash and maybe OS-specific sorry
[11:33] <`Samus_> but it's geting me nuts
[11:33] <{xmb}> cant find it
[11:34] * Vadi ([email protected]) has joined #bash
[11:34] * Vadi ([email protected]) has left #bash
[11:34] <pgas> `Samus_: where do you define your prompt?
[11:34] * albech ([email protected]) has joined #bash
[11:35] * Agiofws has quit (Remote closed the connection)
[11:35] <`Samus_> is bieng defined in /etc/profile (/etc/profile.bash really but it-s sourced from there) there-s no PS1 in .bashrc and the rest of the variables are set
[11:35] <`Samus_> the most weird part is that in the virtual consoles (Ctrl+Alt+[1-6]) is ok
[11:36] <{xmb}> smells likke a code fault
[11:36] <`Samus_> but everything under X not
[11:36] <pgas> what if you do bash --login in xterm?
[11:36] * Oper_ ([email protected]) has joined #bash
[11:36] <`Samus_> let's see
[11:37] <`Samus_> bash --login shows it ok
[11:37] <`Samus_> in fact resourcing /etc/profile fixes it too
[11:38] <{xmb}> code fault something where
[11:38] <pgas> ok, so one of the script starting X sets PS!
[11:38] <pgas> you are on debian? have you checked /etc/bash.bashrc ?
[11:38] <`Samus_> that's what I think but I can't find it
[11:39] <`Samus_> no I'm on archlinux
[11:39] <pgas> what if you type just "bash" in a terminal?
[11:39] <`Samus_> and it might be some mistake because it started to happen after the last upgrade
[11:39] * floyd_n_milan ([email protected]) has joined #bash
[11:39] * hark ([email protected]) has joined #bash
[11:40] <`Samus_> 'bash' shows the wrong prompt, 'bash --login' the right one
[11:40] <pgas> in a terminal with the correct PS1 that is
[11:40] * osfulgore ([email protected]) has joined #bash
[11:40] <`Samus_> oh, in a terminal with the right prompt it stays ok
[11:40] * `Samus_ fells kinda lost...
[11:41] <pgas> ok, so the problem seems to be in one of the script used to start X
[11:42] * prince_jammys has quit ("Konversation terminated!")
[11:42] * Oper_ has quit ("Íå çíàåòå Äàíèëà Áåðåíöåâà? Îí ñêîðî âñòðåòèòñÿ âàì! Íå ñëûøàëè òàêîãî àâòîðà? Äîñòàíüòå ïðÿìî çàâòðà!!!")
[11:42] * Oper_ ([email protected]) has joined #bash
[11:42] <`Samus_> grepping 'PS1' in /etc/X11 didn't showed anything
[11:42] <`Samus_> some clue of what should I look for (or where)?
[11:43] <pgas> startx? ask #archlinux?
[11:43] <`Samus_> going...
I've also tried different WMs (KDE, xmonad) and they have this same problem but then, "fgrep 'PS1' /usr/bin/startx" and "fgrep -R 'PS1' /etc/X11/" showed nothing!! now what?
truly wtf...

Fglrx: module mismatch after last upgrade

Ok, I know what it means and I know that everything should work...but it doesn't
After yesterday upgrade of xorg-server the ati-drivers conflict with the new version
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux kortirion 2.6.17-beyond #1 PREEMPT Sun Jul 30 13:09:32 CEST 2006 i686
Build Date: 09 September 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 11 12:12:22 2006
(==) Using config file: "/etc/X11/xorg.conf"
(EE) module ABI major version (0) doesn't match the server's version (1)
(EE) Failed to load module "fglrx" (module requirement mismatch, 0)
(EE) No drivers available.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
I've done some researches and even using startx -- -ignoreABI doesn't help:
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: UNKNOWN
Current Operating System: Linux kortirion 2.6.17-beyond #1 PREEMPT Sun Jul 30 13:09:32 CEST 2006 i686
Build Date: 09 September 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Sep 11 12:15:57 2006
(==) Using config file: "/etc/X11/xorg.conf"
(WW) module ABI major version (0) doesn't match the server's version (1)
[R200Setup] X version mismatch - detected X.org 7.1.1.0, required X.org 7.0.-1.8
(EE) Failed to load module "fglrx" (module requirement mismatch, 0)
(EE) No drivers available.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
I've tried also the newest ati drivers ( 8.28.8 ) with no luck (and btw the current PKGBUILD doesn't work too, it complains about a already existing links to Makefile.lib.c; applying the patch ati-makefile-2.6.16.patch correct the problem).
The open source's ati drivers work, and I'm using them now. xorg.conf hasn't changed at all and, no, generating one new with aticonfig doesn't solve the problem.

I got it working now
At first, compiling ati-fglrx-beyond with the Cerebral's pkgbuild they gave me this error:
make: Entering directory `/usr/src/linux-2.6.17-beyond'
ln: creating symbolic link `./Makefile.lib.c' to `../scripts/Makefile.lib.c': File exists
make[1]: *** [scripts/Makefile.lib.c] Error 1
make: *** [_module_/var/abs/local/ati-fglrx-beyond/src/lib/modules/fglrx/build_mod] Error 2
make: Leaving directory `/usr/src/linux-2.6.17-beyond'
ok, let's remove that link then, I thought. But after having done that:
make: Entering directory `/usr/src/linux-2.6.17-beyond'
CC scripts/Makefile.lib.o
gcc: scripts/Makefile.lib.c: No such file or directory
gcc: no input files
make[1]: *** [scripts/Makefile.lib.o] Error 1
make: *** [_module_/var/abs/local/ati-fglrx-beyond/src/lib/modules/fglrx/build_mod] Error 2
make: Leaving directory `/usr/src/linux-2.6.17-beyond'
That was weird :?
After googling a bit, I've found an idea from the ubuntu forum where it says to run
make scripts/
from /usr/src/linux-$kernver/ ; after a little wait time to allow the compiling, I retried to make the driver compiling and this time they worked flawlessly
No more module mismatch, I wonder why I didn't have that Makefile.lib.c in the kernel source directory....
Anyway, thanks for your help Cerebral

Bridge Browser icon missing after the upgrade to OS2

I have suddenly realised that the Bridge Browser icon has been missing from my PlayBook after the Upgrade to OS2. My service provider data plan supports browsing and I use to do that earlier on OS1. Now a days, since I am mainly using Mifi device...did not use Bridge Browser....BUT suddenly realised that this icon is missing.....
Any idea what I need to do to get that icon back on PlayBook? and also use it....

It's really funny...The OS2 manual says that there will be an icon for Bridge Browser....but in reality...you do not require any separate bridge browser icon...Browser main icon works for both...wifi connection as well as bridge connection....
I am surprised, why RIM has not highlighted this fact in its OS2 manual.....
Anyways....my problem is resolved....

Spotlight and Time Machine broken after restore/upgrade

I've found a few similar threads to this but none of those solutions has worked for me.
Two things happened at nearly the same time, so I don't exactly know the source of my problem:
I upgraded my old MacBook Pro (approx. Oct 2010, 2.66GHz I think, 300GB-ish HD) from Lion to Mountain Lion
The hard drive on my old MacBook Pro developed a terminal fault, so I had to buy a new one (8GB, 750GB HD) and restore a month-old Time Machine backup from my external drive.
I can't remember whether my last Time Machine backup to my external drive was before or after I upgraded to Mountain Lion.
Now I'm on OS X 10.8.2 on this new machine and I have two problems that seem to co-exist for a lot of other people too:
Spotlight won't index: this is f***ing infuriating, I love spotlight and I use it all the time. When I first restored from the TM backup I think the old index restored with the backup as I did get a decent number of search results (both in spotlight and in MS Outlook), but new files didn't seem to get recognised. I tried adding my hard drive to the exclusion list and removing it again in an attempt to get it to rebuild the index, but all that did was wipe the old index without building a new one, so now I get no spotlight results whatsoever. I tried this solution and sadly it hasn't worked either. Basically I can't search for anything. Even applications (which I like to launch from spotlight) don't appear. All I get is "estimating indexing time", and it never gets any further.
Time Machine won't back up: the first time I tried to backup my new machine it got a few hundred megabytes in before stalling; then a few hundred kilobytes in the next time I tried; and now it just doesn't get anywhere at all. The external drive I'm trying to backup to is recognised fine, I can see all the other files on it, and Time Machine seems to know that it's there, but the backup gets nowhere.
There are reports of this kinds of crap all over the Apple Support forums, but no definitive answer, especially for 10.8.2.
I could really do with some help on this. I need a backup before I screw another laptop, and I need spotlight to survive day-to-day life.
Thanks,
Craig

Hi Craig - I had the exact same problem - I'm using an old early 2009 MacBook Pro upgraded to 8 Gb Ram, 1 TB internal Hitachi HD, 10.8.2 - tried the fixes suggested - got it to work with these steps- everybodies mileage is different but hopefully it works for you as well.
a) I repaired disk permissions with Onyx (free utility) and then started up with Command-R using Disk Utility to repaired/check the Volume (harddisk checked out fine but the volume needed some minor repairs )- Onyx repair disk permission seems to go deeper -had to reinstall some apps - don't know if this solved it-seems to bring it back to the default state - you might get away with doing all from Disk Utility (but starting up with Command-R)
b) restart from my internal hd
c) downloaded the 10.8.2 combo update ( not the incremental shell update or whatever you call it which automatically gets installed with software update - combo update installs everything fresh from the .0 version)
d) with Onyx I deactivated spotlight and erased the spotlight index
d) restart
e) started TM backup - prep took pretty long 30 minutes but then 450 GB got backed up in 6 hours to my external HD which is fast enough for me
f) activated spotlight and 450 Gb were indexed in 9 hours or so
g) for 2 days everything runs fast and very responsive
best,
Franz

My 4s seems different after last upgrade

should my 4s be any different after this last upgrade. My calander sound will go off but when I open it the sound will not shut off. My autofill is not always working

Do the basic troubleshooting steps described in the User Guide, Appendix B:
Restart, Reset, Restore

After last upgrade my itunes album covers dont match the songs. any ideas why?

after last system upgrade, the album covers do not match the music. I called apple, they walked me thru something that did NOT work. I delete the music, then readd...get the song with dotted circle....what does this mean?? The info is correct in my itunes under get info and then album art work.....

Did you select the playlists to sync in itunes under the music tab?

Wiki icons broken after last upgrade?

Similar Messages

Maybe you are looking for