Will LV7.0 install on W7 running XP mode?
Hello,
Does anyone know if LabVIEW 7.0 executables will install and run on Windows 7 running in XP mode?
Thanks.
All you need to run an executable is the run-time engine. If you are running any hardware, you will need the drivers as well and this is where you might run into problems. The run-time engine can be found here, http://joule.ni.com/nidu/cds/view/p/id/750/lang/en.
National Instruments
Applications Engineer
Similar Messages
-
Flash player will simply not install?? Running Mac os 10.9.3,
Have uninstalled previous versions of Flash player..now I have no flash player, and the new downloaded version will not download(I get an error message very time)!! Awful, unworkable junk process...Please help. Simply cannot get the Flash version to download...It just hangs, and tells me to try again...really really frustrating, and shame on Adobe for releasing such a awful mistake of an upgrade...
Hello charlottedk, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having cartridge and printhead problems. I would like to try and assist.
I would suggest performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend following the steps in this document on an 'Incompatible Print Cartridge' or 'Print Cartridge Problem' Message Displays on the Computer or P...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
I installed 4.0 and now firefox will not open, though it is running, I have uninstalled and re-installed and it still will not open. Not sure why this is happening
If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]] -
I cannot update iTunes because when I run the Apple Software Updater, it says "'iTunes + QuickTime' has an invalid signature. It will not be installed." If I try downloading only it says "'iTunes cannot update. Invalid signature. Can someone help?
This forum is for questions from those managing sites on iTunes U, Apple's service for colleges and universities to post educational material in the iTunes Store. You'll be most likely to get help with this issue if you ask in the general iTunes for Windows forums.
Regards. -
I'm running VMWare Fusion, and will need to install MS Project. Do I also need to install Microsoft Office to run MS Project? I already have MS Project for MAC.
Microsoft Office is typically a separate product from Project. You should not have to install Office to get Project.
-
Beta cs6 will not install error bridge running but it is not running
Can not install cs6 error close bridge but bridge is not running
I am running windows 7, I check task manager and bridge is not running
Date: Mon, 26 Mar 2012 19:36:19 -0600
From: [email protected]
To: [email protected]
Subject: beta cs6 will not install error bridge running but it is not running
Re: beta cs6 will not install error bridge running but it is not running
created by Howard Pinsky in Photoshop CS6 - View the full discussion
Which operating system are you running? It might still be running in the background. You may want to check your Task Manager or Activity Monitor. Or better yet, if you feel uncomfortable with that, try logging out of your user account, then back in. That might kill any stray processes.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4293603#4293603
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4293603#4293603. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop CS6 by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
When updating iTunes to 11.4 I get the following error: "Files Shared by these updates" has an invalid signature. It will not be installed. Running Windows 7 64-bit.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Does run Mac OS X from external disk will damage Win7 installed at internal disk?
Hi,
When I buy a Mac Mini Server 2011, I replace the Mac OS X Lion bootable disk with a SSD and install Win7 64, the other internal disk is also used by windows.
Now I need write some code in Mac OS using XCode, I assembling the Mac OS X Lion bootable disk with a USB disk shell and plug in Mac Mini's USB port, when I power on the machine and press the ALT key, the firmware show the Max OS disk, but I stoped.
I want to know if I boot into Mac OS, will it damage the Win7 disk? Can I apply OS patch or upgrade firmware?
Thanks in advance!Does run Mac OS X from external disk will damage Win7 installed at internal disk?
Of course not. Why would it? -
Premier elements 13 will not install, thinks I run Vista when I actually have Windows 7
Help?
The last window where you have to click the install button, bottom right, was greyed out. An error message said the install wouldn't run as it said I was running Vista.
I'm using Windows 7 Service Pack 1.
However, I did a restart on my laptop and clicked set up. Everything was fine. Premier Elements installed without a hitch. By this time it was nearly midnight and I forgot to go back in here and say so.
Thanks, Jeff. -
Error Messages when trying to install, uninstall or run iTunes 9
I get the following error message when trying to Install iTunes:
The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
I search my entire computer for the file but it's not there.
Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
"The feature you are trying to use is on a network resource that is unavailable"
Catch-22, I can't install or uninstall and when I try to run iTunes I get:
"The action is only valid for products that are installed"
Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
ok here is what you need to do:
go to the link below and download the Microsoft Windows Installer CleanUp Facility.
http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
Hope it works for you mate! -
I am running a Mac Powerbook G4 OSX 10.5.8 1.33 GHz and can't get Smiebox to install, it downloads the program just fine but will not let me install it, can someone tell me why?
Hi SusieQ,
Seems they have no idea what they're doing over there, to wit...
Mac Snow Leopard and above*
In general, we recommend a multi-core processor and at least 2 GB RAM.
Connection to the Internet is required; Smilebox is optimized for a high-speed broadband connection, and that faster connection will give you the best performance.
Smilebox uses your Internet browser and Flash11 (or higher) to run. We automatically detect whether Flash is installed and will help you install the free download if need be. You will also need javascript enabled. Your internet browser and any security software (firewall, antivirus) you have on your computer may need to be configured to "allow" Smilebox internet access. Please refer our article on - I have security software (firewall or anti-virus software) that I suspect is blocking Smilebox. What can I do to fix that?
If your computer shipped with Windows XP, Windows Vista, Windows 7 and Windows 8 you can install run Smilebox; we do require that Windows XP computers have Service Pack 3 installed.
To run Smilebox on your Mac, your Macintosh should have an Intel or Power PC processor on a G5 or higher (if your Mac was made in the past 3 years, it should meet this requirement), 2GB or more RAM.
*Smilebox will not run on earlier versions of the Mac OS X including Leopard (10.5).
Snow Leopard is 10.6.x, no G3/G4/G5 PPC Mac can run 10.6 or above.
So this line is wrong, or two other lines about Snow Leopard are wrong....
To run Smilebox on your Mac, your Macintosh should have an Intel or Power PC processor on a G5 or higher
https://smilebox.zendesk.com/entries/23872226-What-are-the-system-requirements-t o-run-Smilebox- -
HP Photosmart Premium all-in-one C310a printer, Solution Center will not stay installed.
It seems lately, past month or so, that the HP Solution Center keeps failing and needs to be reinstalled. I get a message which says:" HP Solution Center cannot run because your device installation is not complete." followed by a list of steps to take to remedy the situation, which do not work. I have to uninstall and reinstall the printer and then it will work, but after I shut the computer down for the day or run a virus scan (PC Matic) the problem returns. Can anybody help me?
Hi @oboe1827,
Welcome to the HP Forums!
I see that your HP Solution Center will not stay installed for your HP Photosmart Premium c310a printer. I am happy to help you resolve this issue!
For further assistance, I will need some more information:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is connected, Wireless, or USB.
If the printer is able to make copies.
If you are using Windows, please try the HP Print and Scan Doctor, and let me know what happens!
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
HP Photosmart Premium All-In-One driver software will not fully install
After downloading and installing the full version of the printer driver (both from on-line site AND from purchased driver CD), the software appears to download fine, but will not fully install. I have run Print and Scan Doctor and tried on-line support, uninstalling, reinstalling the drivers and have tried on-line HP support. My new computer (HP Envy 715 xt) is less than 3 weeks old. I am running Windows 7 Professional 64 bit. The printer/scanner/copier/fax worked fine on my old computer which ran Windows XP. I have tried everything - HP on-line support will not speak to me without charging me, even though my computer is brand new - they insist the problem is with the printer, which is out of warranty.
Hello Deb!
I would recommend performing an L3 uninstall, and reinstalling.
I am listing the L3 uninstall steps below:
-Launch your temp folder
-Go to the 7z folder
-Go to the util\CCC folder
-Launch the uninstall_L3.bat file
Please let me know the results!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
System Profiler will not recognize installed hard drive if drive is in use by VMWare
System Information will not recognize installed Hard Drive (Boot Camp) when in use by VMWare.
I work in IT for a School District and I am creating a Script that system information about the computer. I am testing this on a Mac Pro with two internal hard drives. One drive is Mac OS 10.8 and the other drive is a Boot Camp Drive that is used by VMWare Fusion.
When I run System Information via the GUI or system_profiler via Terminal, both drives show up just fine. However, if I launch VMWare Fusion and run Windows from my Boot Camp drive, then run System Information via the GUI or system_profiler via Terminal, the Boot Camp Drive is no longer listed as an installed drive.
Example:
In the Terminal, I enter the following command.
system_profiler SPStorageDataType
Then it returns this information.
Storage:
Lion Client:
Available: 217.84 GB (217,836,306,432 bytes)
Capacity: 639.28 GB (639,275,270,144 bytes)
Mount Point: /
File System: Journaled HFS+
Writable: Yes
Ignore Ownership: No
BSD Name: disk0s2
Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
Physical Drive:
Media Name: WDC WD6400AAKS-41H2B0 Media
Medium Type: Rotational
Protocol: SATA
Internal: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. Status: Verified
BOOTCAMP:
Available: 255.58 GB (255,575,560,192 bytes)
Capacity: 319.79 GB (319,790,510,080 bytes)
Mount Point: /Volumes/BOOTCAMP
File System: NTFS
Writable: No
Ignore Ownership: Yes
BSD Name: disk1s2
Volume UUID: D4B39D4E-E244-403C-AE4D-4D58397130DE
Physical Drive:
Media Name: WDC WD6400AAKS-41H2B0 Media
Medium Type: Rotational
Protocol: SATA
Internal: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. Status: Verified
Then I launch VMWare, which uses the Boot Camp drive. The once again run the same command from the Terminal Command and I get this.
Storage:
Lion Client:
Available: 213.39 GB (213,392,244,736 bytes)
Capacity: 639.28 GB (639,275,270,144 bytes)
Mount Point: /
File System: Journaled HFS+
Writable: Yes
Ignore Ownership: No
BSD Name: disk0s2
Volume UUID: CCB501BF-AF24-30E7-A938-5A4E52DF14D7
Physical Drive:
Media Name: WDC WD6400AAKS-41H2B0 Media
Medium Type: Rotational
Protocol: SATA
Internal: Yes
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. Status: Verified
The Boot Camp Drive is no longer listed.
I assume this is due to the the fact that the drive is "In Use" however is seems odd since the Mac drive is also in use and it appears without problem. I assume there is no "fix" for this, I was just wondering if someone may have an explaination why?
Also, I do realize that I can query the various interface types like system_profiler SPSerialATADataType to get all the properly installed phycial drives, but then I would have to query all possible interface types, isolate only devices containing Volumes, then consoldate the information to just the information that I need. I was hoping for a cleaner query.Thank you for your response.
VMWare may be the cause, but the actual issue I am having is with Apple's System Information. I anticipated resistance from VMWare if I went to them with a question about an Apple software issue (even though VMWare software is part of the equation). I was trying to avoid the inevitable finger pointing game. I thought I would try with Apple Forums first since the issues presents itself within the Apple Software. However, you are correct that VMWare may have an explanation on why Fusion might be interfering with System Information. I will check with them next.
To answer your question. Yes, In most cases I do use Fusion to run Windows side-by-side with the Mac OS. However, that is not always the case. There are a few reasons why I have it setup using a Dual Boot configuration.
One, in some cases, due to the intense programs I occasionally run (graphic applications), I prefer to simply boot straight into Windows via Boot Camp so I may allocate all hardware resources to Windows. Additionally, some graphic applications like to have direct access to hardware and the extra layer of the VM environment can cause problems when an application is trying to directly access specific hardware like a graphics card.
Second, I often use either side, both Mac and PC, for testing. There is an advantage to not having to rely on the Mac OS to run Windows. If, for whatever reason, my Mac becomes unstable due to testing, I can still jump right into Windows to do work if necessary.
Third, I love the Mac OS, but I work in a PC centric organization. If there is a "problem" with my system, it is too easy for other system admins to say, "it's because it's a Mac". Having the definitive separation of the OS's allows me to prove that the Mac OS is not a factor. -
I need to setup 7800 Series IP Phones in the CUCM 8.6.2 which by default are not support but will work after install the software. Anyone have document from Cisco as I remember I seen once before.
Hi Ali,
I'll just add this reference to the good tips from my friend Manish (+5)
Support for the 7800 series in CUCM 8.6.2 was first added with this
Device Pack;
Cisco Unified Communications Manager
Device Package 8.6(2)(24104-1)Release Notes
Cisco Unified Communications Manager Device Package Release 8.6(2)
adds support for the Cisco IP Phones
7821, 7841, and 7861 running SIP firmware release 10.1(1).
The steps are in this doc
http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf
You might as well install the latest 8.6.2 Device pack
cmterm-devicepack8.6.2.24112-1.cop.sgn
Cheers!
Rob
"Seek it out and ye shall find "
- OneRepublic
Maybe you are looking for
-
History is not working in Firefox 3.6.11 it is blank. Private browsing is not set.
History is not working in Firefox 3.6.11 it is blank and does not create any new history. Private browsing is not set.
-
Importing Word documents into Robohelp 8: topic content is in a text box
Hi I think I am doing standard stuff, but I have never used the import from Word function in RoboHelp before... I used file > import to import a Word document, paginating on heading1 and heading2. All is fine, except that all the text of every topic
-
Reference with '*' in GL document
Hi. I know when I create a new GL document, and I write in Reference field an '*', when document is created, in field reference appears document number created. But now, I want to do the same for a preliminary document (type FW) and it isn't working.
-
How many appsutil.zip files for database server w/multi application tiers
Hi Gurus, Two questions needing your help: 1) Patching in a multiple application tiers systems, do we need to create the appsutil.zip file from each application tier (three) and ship it to each of the database tier (two) and unzip appsutil.zip? Go to
-
iPad 2 I am trying to update to ISO5;however, when I go to setting, general, I do not have software update as directions show on apple support.