Will not include all my topics in the compiled help file

I've been rebuilding my project, because it seems like my
file were too big and so the project was no longer compiling
successfully.
Now I have spilt some of the contents of the larger word
file, into two smaller word files and included the topics from
these into the TOC and bascially rebuilt most of the project.
However, now, the compiled version of the file only includes the
topics and books from the first smaller file and ignores that
contents in the second file.
How do I solve this? I have selected to include both these
files into the compiled file, but it still does not work.

Similar Messages

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

I recently updated my apple tv and now you wifi will not connect all other devices in the room are connected to wifi

i recently updated my apple tv to 5.1 now the wifi will not connect all other evices in the house are working fine, any help out there

Go to your ipod touch wireless settings chose your network and right beside there is button looks like ">" click on that check the dhcp what IP are you getting? do you get any ip? if you do your ipod touch should work with wireless no problem. Also, you may have to enter wep key again. After that it shou,d save your device

I updated my face book app on my iphone 4 and now it will not open, even after i rebooted the phone. help???

I updated my facebok app after the app store said that it needed to be updated and ow the app wont load when I try to open it. I have tried to install and reinstall the app and I have also rebooted the phone several times with no results

try settings>general>reset>reset network settings, i mean this sounds like its a facebook issue its self and that you would have to wait for another update, they were probably getting prepped for ios 6 and somehow this one got out for an update, they are usually pretty good about getting updates out.

Captivate will not record ALL screen movements

I have been using Camtashia and recently move to another
company where they want to start using Captivate. I just bought
Captiveate and I am getting very aggrevated! Captivate will not
record all my movements with the mouse or when a screen changes. It
appears that everything is driven by an actual mouse click. Only
when I move my mouse around and then click will it actuall record
the "action".
Please tell me there is a way for Captivate to record all
mouse movements, keystrokes, changes in applications just as I see
it when I am actually doing the recording.
I dont need all this fancy highlighting and project wizards,
I just simply want Captivate to record EXACTLY what I do and see
while I am recording.
PLEASE HELP!

Hi Tmy8ster and welcome to our community
No doubt you are frustrated if you are expecting Captivate to
behave like Camtasia. Yes, both create similar output, but both
accomplish it in entirely different ways.
Perhaps the following link to a thread where I attempted to
explain it will help:
Click
here to read the thread
Cheers... Rick

HT1386 I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync, but apps & podcast will not. All checked to syn

I have Mac itunes and a touch 2G. My wife has Win7 and touch 4G (both iOS 4.2.1). She got a new iphone, I now have her touch 4G, and am trying to sync it to my Mac itunes. The music and videos sync to the 4G, but apps & podcast will not. All are checked to sync. During sync, it gets to "determining apps to sync" then immediately goes to "finished syncing". No apps or podcasts from my Mac itunes are on the touch 4G.

You can only sync to one iTunes library but you can manage music and videos among different computer/libraries.
It appears that you are trying to sync with a different library.
- If you want to make the Mac you syncing computer:
--- Connect the iPod to the computer and make a backup by:
iOS: How to back up
--- Restore the iPod from that backup. Note that synced media like apps and music are not in included in the backup.

By default, Teststand will not include the test step result in subsequence, is there any way to include these step result in report?

By default, Teststand will not include the test step result in subsequence, is there any way to include these step results in report?
Thanks
Jacky

Hi,
If your subsequence is in a separate sequencefile, then check the properties of the sequencefile to make sure that the record has not been disabled.
Regards
Ray Farmer
Regards
Ray Farmer

My Ipod touch will not synch all songs in my library - on my windows 8 laptop. Doesn't matter if the songs are checked or not - only some songs will synch to the IPOD. I have multiple devices and two accounts.

My IPOD touch will not synch all songs in my library. Library is on a windows 8 laptop. Checking the songs does not matter. I have multiple devices (ipod, IPhone 4 and 5, IPad 2) and two ITunes accounts.

All songs play on the laptop windows 8. The second Ipod touch we have - all songs synch to it and play.
But the first Ipod touch we bought - only half (or so) of the songs synch. So I assume there is an issue with the newer Ipod touch. The songs not synching are songs I added to the library from CD's.

Officejet Pro 8600 Plus paper tray will not go all the way in so cannot print

Have loved this printer for almost two years but suddenly the drawer which holds the paper will not go all the way in so cannot print. Took it to a so-called tech at Office Depot who said that because you cannot open/remove the tray, there is no way to see what is jamming it. Any thoughts? My first call for tech support was answered by a tech here in the US who said they had experience with it and it could be fixed and asked dme to call again when I was back in the office and at the printer. The next four calls were answered overseas and they all had had no experience with this problem.

Hi maebun,
Welcome to the hp support forums.
Thanks for your query.
Please find the link for fixing paper jam.
Hope this helps
I am a HP Employee.
The opinions expressed here are my personal opinions, not of HP.
Make it easier for other people to find solutions, by marking an answer “Accept as Solution” if it solves your problem.
Click on Thumbs up if my post helped you.

In safari a lot web pages will not scroll all the way down

a lot of web pages in safari will not scoll all the way to the bottom what do I do

You can try to resetting Safari. Tap Settings, then tap Safari on the left side. Then on the right side - tap clear history, clear cookies, clear cache. Clear all three. Reboot your iPad. Hold down on the sleep button at the top until the red slider appears and slide to power off. Then hold down on the sleep button until the Apple logo appears and the iPad will restart. Launch Safari and see if helped.
If you are trying to scroll through an area of text and can't scroll to the bottom try a two finger scroll.

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7. Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.
Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

My hp 100 mobile printer will only print one page then quits. will not print all of the pages.

my hp 100 mobile printer will only print one page then quits. will not print all of the pages. i have rebooted, new install, and reset. still the same thing. when i look it shows that it is printing but there is nothing happing. i use this with my lap top.

Hello colt1,
Are you using Bluetooth or USB cable to connect to the printer? Did you install from the disc, or from the online program? When it sits there and doesn't print, does it eventually give error messages, lights flashing, etc.?
Thanks,
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

When I click "Buy Now" in iPhoto's book I get the following message: Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"

When I click "Buy Now" in iPhoto's book I get the following message: "Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"
How do I proceed? How do I identify which is "default text?"

What version of iPhoto are you using?
Go thru each page, check the layout to see if there's a text box included on the page and make sure there is text in that text box. If not it may show the "holding" text like this:
If you don't want to change the page layout to one that only has photos and no text boxes just select that holding text and put a space in its place.
OT

When I click Buy Book this appears our book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue? will the text I have sellected still be ok or will the book have missing text help Pleas?

I just spent 3 days creating a book [32 pages], with photos and text but when I click Buy Book In iPhoto this appears>
Our book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?
My question is will the text I have sellected to use still be ok, am I safe to continue and buy or will the book have missing text ?
The book is for special birtday in 2 weeks time Please Help.G
<Email Edited by Host>

Yes, you're safe to continue. That means that there are text boxes that you did not put any text into and they contain the holding text which will not be printed. That text is shown in a light grayt and is in Latin. Normally you can just put a space in the text box to replace the holding text so as not to get that warning message.
Before ordering the book proof the book according to this Apple document: iPhoto, Aperture: Previewing an order in iPhoto or Aperture. Check the pdf file for any missing text or photos and any warning indicators in the text boxes indicating that some of the text has exceeded the space allotted in the text box.
Keep the pdf file to compare with the printed copy when you reciive it.
OT

How can I fix the text in my photo book that reads"your default text had not been edited. Printed books will not include this text?"

How can I fix the text in my photo book that reads"your default text had not been edited. Printed books will not include this text?"

You will get this warning, if your book includes textboxes that still include the default text, like "Insert Title". You need to find these boxes and add your own text. Look for boxes like this:
Make a PDF-preview of your book and look, where the preview differs from what you are seeing in iPhoto.
iPhoto, Aperture: Previewing an order in iPhoto or Aperture

Will not include all my topics in the compiled help file

Similar Messages

Maybe you are looking for