Will Scene Builder 2 support SwingNode and JFXPanel?

We have a large swing app that we're migrating to JavaFX over time. I want to use FXML and SceneBuilder for all new UI design and am wondering if SB 2.0 will support SwingNode and JFXPanel? If so, what level of support? Will I be able to set all the properties/handles in the SwingNode and JFXPanel but nothing inside the embedded node from the other UI type? This is all that I was hoping for.
We're going be mixing Swing and FX longer term so we'd need this support (along with the custom control support in SB 2.0) to effectively use it.
Thanks,
-Darryl

Sorry for the late reply, Darryl.
Yes, SB2 will support SwingNode.
You will be able to drop a SwingNode in any container that accepts a Node:
- In the Content panel, you will be able to select and move the SwingNode.
You will not be able to resize it (because a SwingNode has no sizing properties).
- In the Hierarchy, SwingNode will be a leaf node (SB won't allow you to build
a Swing UI inside your SwingNode)
- In the Inspector, SwingNode will be inspectable like any other Node :
however SwingNode.content property will not be exposed ; this property will
have to be manipulated programmatically by your application.
Eric

Similar Messages

Will the iphone 5s support talk and data simultaneously?

Will the iphone 5s support talk and data simultaneously? Didn't hear anything about it so just want to confirm.

musaabo wrote:
Will the iphone 5s support talk and data simultaneously? Didn't hear anything about it so just want to confirm.
No.
(I'd put the link up but I think Verizon would delete/edit my post).
From a New York Time's piece, "It was Apples decision to design the iPhone 5 so that customers could only make voice calls and do Internet activity simultaneously only over Wi-Fi, not over Verizon cell network."
The reason why...
"The explanation for this, it turns out, is complicated. The technology in 4G LTE networks does not currently handle voice transmissions; it only does data. So when you place a phone call on a 4G LTE smartphone, it’s actually rolling back to the carrier’s older second- or third-generation network, according to AnandTech, a Web publication that does deep analysis on hardware."

How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

How will the Time Capsule support IPv6 and coop with the new emerging security threats that will emerge due to the new technical possibilities that IPv6 provide?

Cross your fingers and hope.
Obviously if there is any big or known threat Apple will send out a firmware fix.
But the TC is designed to be end user simple device. It has no firewall that is visible at any rate. I don't know that it truly doesn't have a firewall but it is not part of the end user controls.
IMO if you have major security concerns that go beyond end device firewall, which is where Apple do put most of the security, since firewall in the router is plainly not a stop to anybody deliberately downloading an infected file or website, and most end users.. do not want a firewall that prevents them using the web like a business does, where only certain ports are allowed. Everything else tough luck.. you are not allowed to use it. Then TC is unsuitable for you anyway.. buy a proper firewall appliance.

Will SB PCI 128 Support CDRW and DVDRW Earphone Listeni

Hey Gang,
I was able to listen to my headphones privately on my CDROM. The jack was located on the front of the device just below the cdrom turntable.
My soundcard has been my SB PCI 28. My problem is that since I got rid of the old cdrom and upgraded to a DVDRW and a CDRW I haven't been able to listen to my headphones/earphones anymore.
Does my SB PCI 28 earphone support earphone/headphone listening on a DVDRW or CDRW, or is is STRICTLY FOR CDROM's?
Do I have to download new drivers, reset a jumper or get a new card?
I've tried pluggin the audio cord from the cd/dvd to each one of the three rectangular input jacks on the sb pci 28 and no joy.
Thanks,
HULK

Make sure you disable Digital Playback for the DVD-ROM.....in device manager and the software you are using for example WMP.....

ABAP and Java Stack: Which to choose/supported standards and components?

Hello,
I am trying to understand the role of the two stacks in NW. Maybe anyone has a few
hints where I can find answers to the following questions:
- An overview of supported Standards (Java 5 since when?)
- An overview of which component runs on which stack? Portal->Java, Integration Server->ABAP and so on.
- Guidelines when to install both stacks and when to use just one stack? When do I use which one?
- Has SAP an stategy towards an one Stack solution (possibly Java?)
Best regards and thanks for any pointers!
Stefan

An overview of supported Standards (Java 5 since when?)
Go to service.sap.com/pam
Product Availability Matrix will tell you about supported version and platforms.
An overview of which component runs on which stack? Portal->Java, Integration Server->ABAP and so on.
Usually the question goes the other direction: what stacks we need for implementation of a particular function?
More and more products require ABAP backend and Java frontend.
For example Employee Self Service has been transerred from ABAP only ITS based to ABAP backend and Java frontend.
Same with SRM.
Guidelines when to install both stacks and when to use just one stack? When do I use which one?
Same as above, driven by business requirements, not technology.
Has SAP an stategy towards an one Stack solution (possibly Java?)
No. Core business functions are still being developed on ABAP and interface, GUI etc utilize JAVA.
Regards,
Slava

Scene Builder

Will Scene Builder be integrated in Netbeans or it will be a stand alone application?

It runs both ways already.
http://wiki.netbeans.org/NB72_FX2_Plan#SceneBuilder_support
http://docs.oracle.com/javafx/scenebuilder/1/installation/jsbpub-installation.htm
Upcoming NetBeans7.3 version will feature more integration points between the two tools.
http://wiki.netbeans.org/NB73_FX2_Plan#SceneBuilder_Support_.2F_Raw_FXML_Editing

I am building a new PC and need to swap the PS Elements 10 Licence from the old machine to the new - the old machine will be scrapped

I am building a replacement PC, and want to install PS Elements 10 on the new machine. It is currently on the old machine and that machine will be scrapped once the new one is running - how do i go about this ?

You are allowed to have the software installed and activated on two machines, but since you are scrapping the current one, you should deactivate the software on it if you are able to.... open the program and choose Help -> Deactivate. If you are not able to access the machine to do this, then you should contact Adobe Support by chat or phone and have them do it.... Contact Customer Care
All you need to do is install the software on the new machine (assuming it is compatible). If you need to download PSE10 you can find it thru the following page...
Download Photoshop Elements products | 11, 10
You will need the serial number to activate the software. If you do not have it at hand, you might be able to find it in your Adobe account online.
To locate the serial number:
http://helpx.adobe.com/x-productkb/global/find-serial-number.html

Flash will no longer be supported for mobile devices. Is Flash Builder also going to stop building m

Flash, specifcally mobile Flash, was effectively sentenced to death a while back. The first inklings came when Abode put out their own non-Flash media tool “Edge,” and then was confirmed when the company dropped 750 employees and halted all development of mobile versions of Flash, ostensibly forever. It’s not until now, however, that we’re seeing Flash really start to crumble. Android, once open to the protocol, will no longer be supporting Adobe Flash with its newest version, Jelly Bean.
What is the faith of Flash Builder? PC apps only?

Yes Flash is no longer supported in the browser...   I am a Flash Developer and I think this is a good thing. I personally believe that Browsers in general on mobile devices will die a slow death.
Have you tried using them ... no matter what device you choose and how good the browser is, the experience is horrendous. Flash running in the browser on a smartphone is painful.
Browsers will be replaced by apps.
Let me give you an example.
I was upgrading the OS on my daughters iPod Touch Devices and noticed that their Safari Browser was in a folder called "Junk" along with the compassVoice MemosNews Stand, Stocks, etc.
I asked them "Why is your browser in a folder labeled Junk and how do you find anything online? "
Their response
"If I need to look anything up I search in the App Store"
Example: Daughter needs a Dictionary to do her homework... she wont go to www.dictionary.com   she opens up her app store and downloads a dictionary app.
I see the app stores as the new Google.
The beauty of this is that us developers can sadnbox our experience and deliver it in whatever technology we choose to. We no longer care if Browser A supports Flash or which browser supports which HTML tag.
I have a 3 yr old son .. and I am convinced he will one day say to me.   " Dad... I cant believe you used to have to type WWW dot bla bla bla    SLASH bla bla bla SLASH bla bla bla   "

When will flash builder support export to Windows Mobile OS?

When will flash builder support export to Windows Mobile OS?

I think maybe VB was confused by you calling it "Windows Mobile," as Windows Mobile is MS's obsolete, abandoned Mobile OS for pre-iPhone era with a stylus and all that, I am assuming you probably meant "Windows Phone" / Windows 8 Metro UI / Windows RT, the new iPhone-like MS Mobile OS.
See this thread: http://forums.adobe.com/message/4526684#4526684

Will my iTunes account support two iPads, and will the apps that I paid for on one iPad be free on the second iPad.

Will my iTunes account support two iPads, and will the apps I buy for one iPad be free for the other iPad.

Yes yes and yes.
My girlfriend and I use the same AppleID for purchases, and any apps that she purchases I am able to then purchase without additional charges.
EE

HT4623 I have the original iPad, it does not seem to support ios6 and will no longer connect to iTunes WHY is this

I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?

Start here... http://www.apple.com/support/iphone/assistant/itunes/

When Pages will support portrait and landscape page orientation in the same document?

When Pages will finnaly support portrait and landscape page orientation in the same document?

Only Apple would know, and it isn't telling.
Peter

I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.

Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.

Will Apple support facetime and imessage in Ipod though 5.1.1 ?

Will Apple support facetime and imessage in Ipod though 5.1.1 ?

The Apple Messages app cones with iOS 5 and later. That means a 3G and later iPod has Messages.
Facetime requires a front camera. That only the 4G and later iPod has FaceTime

When will Oracle 10g/11g support Windows Server 2008 and AIX6.1

Hi all
I'm sorry if I post it in a wrong place... But I really want to know when will Oracle 10g/11g support Windows Server 2008 and AIX 6.1?
I've searched in metalink but found nothing useful. Is there anybody can give me a link of Oracle's roadmap for platform support?
Thanks!

Oracle does not announce release dates and neither
does any other software company.But Oracle does have a very good track record of supporting their products on new windows releases extremely close to the windows release date. Clearly they can't support on an unreleased platform though. Given that the launch of Server 2008 isn't even complete worldwide yet (19th March in the UK for example) it would seem that this enquiry is a little premature.
Niall Litchfield
http://www.orawin.info/

Will Scene Builder 2 support SwingNode and JFXPanel?

Similar Messages

Maybe you are looking for