Will this HP WIRELESS PRINTING UPGRADE KIT work on officejet 5610

Will this HP WIRELESS PRINTING UPGRADE KIT #Q6236A
work on officejet 5610?
This question was solved.
View Solution.

Hi,
From user experience: yes. Please check the following post:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/HP-Q6236A-Wireless-Print-Server-and-HP-...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Will Wireless Printing Upgrade Kit support All-in-one Printer F4235?

I have not found this information in the forum, I hope someone will be able to help me.
I purchased a Wireless Printing Upgrade Kit and I'm not sure if it is compatible with my printer. I have an all-in-one F4235. The list on the box does not list this model but it says also works with most other HP printers and all-in-ones. I have checked the website and it lists the same printer so I don't know if the list just has not be updated.
I don't want to open the package until I know if it is compatible.

Yes, the HP Deskjet F4235 (F4200 series) All-in-one supports the Wireless Upgrade kit.
For more information, refer to the below weblink.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00783236&lc=en&dlc=en&cc=us〈=en&product=3200077

Problems with re-installing HP wireless printing upgrade kit

I had to return my Dell Inspiron 6400 to original factory settings and since then I cannot install the wireless printing upgrade kit. It says it cannot recognise the pc adapter even though Windows has installed the driver automatically for it. So hangs and won't install. I'm trying to get wireless connection for a HP Laserjet CP1215. Any ideas most welcome!

Hi, No hardware kit. The following driver is for Windows 8.1: http://ftp.hp.com/pub/softlib/software12/COL32135/bi-109984-2/OJ_SF_K8600_140_408-4.exe Most likely this will work with Windows 10 for printers which are less than 3 years old. Regards.

HP Wireless Printing Upgrade Kit and MacBook

Hi,
I've bought the HP Wireless Printing Upgrade Kit to connect my printer at the wireless network. That printer is HP Color Laserjet CM1312 MFP. I've set the a static IP on the router settings and for the Windows PC, that are in my wireless network at my home, everything works well.
The problem is about the connection with the MacBook (10.6.8) because there aren't some driver or solution to obtain the access to that printer from a user that isn't on a windows.
Do you have some ideas to help me?
Best,
Matteo

Hello Matteo,
Thanks for the post on the upgrade kit. If you have not already, I might recommend posting this question to the link below. Good Luck!
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Wireless Printing Upgrade Kit and Laserjet P1006

Hello,
I am just wondering if the HP Wireless Printing Upgrade Kit is compatible with the HP Laserjet P1006 printer. It is not listed on the compatibility list but I have read several accounts of people who claim to be using them together. I have also read posts that state they are not compatible. Either way, they will not work together for me so I am trying to figure out if it is something I am doing wrong in the setup or if the two pieces of hardware are simply not compatible. If anyone has any suggestions I would greatly appreciate it.
Thanks,
Lauren
P.S. I am using a Dell XPS M1310 Notebook with Vista.

Hi,
I guess that would help:
http://www.computerhuset.dk/PDF/hpljp1006.pdf
In turn, I was wandering if one could get away without the PC dongle to avoid the PC looking like a porcupine and rely on the PC's bluetooth or Wi-Fi adapters.
Best

What's the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?

Hello!!
What’s the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
I found two things as follows.
1. MAC support
2. USB dongle
Is there anything else?

Now I’m clear!!
But there are descriptions for each on your home page over view tab. Due to this forum restriction; I cannot put the URL here.
They say for each as follows.
HP Wireless Printing Upgrade Kit --- Retain full all-in-one wireless functionality: print, fax from your PC, scan, and access photo memory cards access and PC status
HP Wireless G Print Server --- Get the same functionality with your all-in-one: printing, scanning, photo memory card access, PC faxing, and printer statusSo I got confusion, that’s why I did not get the difference for them.
And I found wrong description on your HP support document page. I recommend that you correct it, because it put consumer into confusion and break to buy this product.
The title is “HP Wireless Printing Upgrade Kit - Setting up the HP Printer with the HP Wireless Printing Upgrade Kit in Windows .”
The wrong description is “NOTE: You must turn on the computer with the computer adapter in order to print to the wireless product” at last line of “Step two: Configure other computers to use the printer. “
You can erase this line!!

Wireless printing upgrade kit

COULD ANY ONE TELL ME PLEASE, I HAVE OFFICEJET ALL IN ONE PRINTER 5610 , WOULD IT BE POSSIBLE TO MAKE MY PRINTER WIRELESS BY BUYING A HP WIRELESS UPGRADE KIT
HOPE SOME ONE MIGHT KNOW
THANKS

Yes, the 5610 is compatible with the HP Wireless Printing Upgrade Kit.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Wireless Printing Doesn't Work

In February I had to purchase a Mac desktop computer due to the failure of my semi-old HP Windows computer. When we bought the Mac we also purchased a new printer since it would be cheap since we bought it with the computer. The printer is a HP Photosmart Plus B210a series model and so it has wireless printing. However, the only way to get the 'wireless printing' to work is if you first install the software. Seems good, right? No. After proceeding to turn off the printer like every normal person since you don' want to leave it on, everything goes wrong. If you turn the printer on at some time, the wireless printing won't work at all! Even if I disconnect and reconnect the WiFi to it and print the diagnostics page, where everything turns out normal EVERYTIME. This is quite thoroughly making me irate because to get the wireless printing to work again, you have to uninstall the software and reinstall it. I got so fed up with it the other night that I connected a USB cord to it, which totally defeats the purpose of the entire printer since it's suppose to be hi-tech for it's wireless printing and e-services ( which require WiFi). Can anyone please help me figure out how to have the printer continuously working so it doesn't just stop when I turn it off?
Solved!
Go to Solution.

By the fact that you desire the printer to be turned off, I would think that you probably shut off your computer and other devices as well? You do this every time you're done?
There are two schools of thought on this.
Turning it off:
- Reduces electrical usage versus leaving it on in low power or 'sleep mode'. In today's modern terms, you'll probably save about $40 a year.
- If you have a fan or cooling issue, such as you're in a tight space with no airflow, this can reduce heat and cause hardware to last longer.
- No one can access your machine or other devices when they are turned off. This prevents virus's from executing or running so long as the machine *remains* off.
Leaving it on:
- Allows programs to update automatically when you are not there, dramatically reducing the chances of getting a virus and also giving you the latest version of your software.
- Virus scans can be run *automatically* to fully scan your computer while your not there, making it unnessasary to do this when you're actually using the computer, and therefore speeding up the computer greatly.
- Instant-access to what you're doing, instead of having to wait for the machine and devices to turn on.
- If you're sharing files, folders, or printers, this makes them available on the network.
Computers and their accessory devices are designed to run 24/7, 365 days a year. They are also designed to be shut off every night, if that is your preference. However, I think the benefits of leaving things on greatly outweigh the benefits of turning things off. Again, however, it's a personal decision.
If you decide to turn your devices off after use, please spend the time at each session to download and make updates to your computer, especially WIndows Updates and anti-virus databases. Especially with the anti-virus updates, try not to access the internet until you have the latest anti-virus update installed.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Will this video card and power supply work on my computer? HP Pavilion p6213w Desktop PC

I have a HP Pavilion p6213w Desktop PC, will this video card and power supply work on my computer?
Video Card: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=8379339&sku=A455-0760
Power Supply: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4668507&sku=C13-2511
Any help is greatly appreciated, thanks.

It is unlikely that the power supply will fit/work in your HP Pavilion p6213w Desktop Computer. Please consider the Corsiar CX500, CX500M, CX600, and CX600M for your power supply needs. These power supplies are the same physical size as the factory unit and are known to fit and work in most HP full-sized consumer desktop computers.
There is a chance that the GTX 760 and other current generation video cards may not work in your computer. These newer cards typically require the computer to support the most current UEFI standards and many motherboards don't meet this criteria. Please know the return policy on any video card you purchase, in case it doesn't work. If the GTX 760 doesn't work, consider the GTX 650/660 Ti or equivalent AMD graphics card for your graphics card needs.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

Hi,
Apple's AirPrint only support specific models while using wired or wireless network connection.
Plugging a printer into a USB port of Apple base is not supported for AirPrint:
AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
http://support.apple.com/kb/ht4356
There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
http://www.ecamm.com/mac/printopia/

Will this version of snow upgrade from 10.5.8?

will this version of snow upgrade from 10.5.8?

Yes, Snow Leopard will upgrade Leopard. But you will need 10.6.6 or later if you plan to upgrade to Lion.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current Tiger Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Installer menu (Utilities menu for Tiger and later.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
Open Disk Utility from the Utilities folder.
Select the destination volume from the left side list.
Click on the Restore tab in the DU main window.
Check the box labeled Erase destination.
Select the destination volume from the left side list and drag it to the Destination entry field.
Select the source volume from the left side list and drag it to the Source entry field.
Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
C. Important: Please read before installing:
If you have a FireWire hard drive connected, disconnect it before installing the update unless you will boot from this drive and install the update on it. Reconnect it and turn it back on after installation is complete and you've restarted.
You may experience unexpected results if you have installed third-party system software modifications, or if you have modified the operating system through other means. (This does not apply to normal application software installation.)
The installation process should not be interrupted. If a power outage or other interruption occurs during installation, use the standalone installer (see below) from Apple Downloads to update. While the installation is in progress do not use the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
Insert OS X Installer Disc into the optical drive.
Restart the computer.
Immediately after the chime press and hold down the "C" key.
Release the key when the spinning gear below the dark gray Apple logo appears.
Wait for installer to finish loading.
E. If updating:
Download and install update(s)
Use Software Update, or
Download standalone updater(s).

Wireless printing no longer working after installing HP 2.7 update

I have been using wireless printing from my Macbook Pro (running Lion OSx 10.7.2) fine until yesterday when it just stopped working out of nowhere. From looking on the forums it appears that this is probably a result of the HP 2.7 update (which I also had the issue of continuously re-appearing in my software update list even after installing it multiple times - though i was able to resolve this courtesy of this forum). I've tried re-installing the printer multiple times and it works fine when connected via USB, it acnowledges that the printer is connected to the same wireless network as my computer bu

OK, before you dive any more into the registry, a simple question. Did you try uninstalling iTunes, rebooting, and re-installing iTunes?
I do have an entry for 'iTunes.Application.1' (below). However, I'm sure there are many more registry entries related to iTunes. In other words, adding this entry will probably not be sufficient to restore the COM functionality.
Windows Registry Editor Version 5.00
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}]
@="iTunes Class"
"AppID"="{F98206B5-F052-4965-9FA0-85F61BC3C19D}"
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}LocalServer32]
@=""C:\Program Files\iTunes\iTunes.exe""
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}ProgID]
@="iTunes.Application.1"
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}TypeLib]
@="{9E93C96F-CF0D-43f6-8BA8-B807A3370712}"
[HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}VersionIndependentProgID]
@="iTunes.Application"

Lexmark x4850 Wireless Printing isn't working...

Hello,
I have a client with a new Macbook pro and a Lexmark x4850 wireless printer. I found this thread:
http://discussions.apple.com/message.jspa?messageID=8299637
I tried the things people had suggested and can't seem to get anything working. They are using WEP lowest encryption because someone had mentioned that had worked for them. USB works fine but they want to print wirelessly. Lexmark support doesn't mention anything on this issue. I discovered that the "driver" for the Mac also includes the utilities to setup certain things including wireless printing. I tried the software and still, no good.
If anyone can help I would appreciate it.
Thanks,
Dru

Pretty Please?

Zyxel modem will not allow wireless printing

My Netopia modem died recently and Eircom sent me a new Zyxel D1000 modem.
I have a Canon MG7150 wireless printer and I used to be able to wirelessly print from laptop, iPad and iPhone through the Netopia modem.With the new Zyxel modem I cannot connect to the printer at all.From what I have read on this forum there is no fix for this short of buying a different modem.This is not acceptable.Can Eircom provide a modem which allows wireless printing such as the Netopia previously supplied.Otherwise I see little point in remaining an Eircom Broadband customer.

I found a way to get this working. In the Home Networking/LAN setup set RIP direction to 'none' and RIP version to n/a or RIP1 depending on what's available. Also disable IGMP snooping.

I have an HP 3050A wireless printer that was working fine and now all of a sudden it doesn't print.

My HP 3050A wireless printer has stopped printing. I have restarted both my computer and the printer and it still didn't work. I deleted the printer from my printer list and then restarted everything again and now it doesn't even find the printer. What am I doing wrong? My computer is a new Mac. Thanks for your help.
This question was solved.
View Solution.

Hi,
Can you see the wireless light on the printer as Solid blue or is the lighe blinking?
If the light blinks, it means that the printer has disconnected from the network.
In order to reconfigure it - temporary connect the printer with USB, launch the HP Setup Assistsant (Located under Applications > Hewlett-Packard > Device Utilities) and follow the steps to reconfigure the wireless connection.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Will this HP WIRELESS PRINTING UPGRADE KIT work on officejet 5610

Similar Messages

Maybe you are looking for