Problems with re-installing HP wireless printing upgrade kit

I had to return my Dell Inspiron 6400 to original factory settings and since then I cannot install the wireless printing upgrade kit. It says it cannot recognise the pc adapter even though Windows has installed the driver automatically for it. So hangs and won't install. I'm trying to get wireless connection for a HP Laserjet CP1215. Any ideas most welcome!

Hi, No hardware kit. The following driver is for Windows 8.1:    http://ftp.hp.com/pub/softlib/software12/COL32135/bi-109984-2/OJ_SF_K8600_140_408-4.exe Most likely this will work with Windows 10 for printers which are less than 3 years old. Regards.

Similar Messages

  • HP Wireless Printing Upgrade Kit and MacBook

    Hi,
    I've bought the HP Wireless Printing Upgrade Kit to connect my printer at the wireless network. That printer is HP Color Laserjet CM1312 MFP. I've set the a static IP on the router settings and for the Windows PC, that are in my wireless network at my home, everything works well.
    The problem is about the connection with the MacBook (10.6.8) because there aren't some driver or solution to obtain the access to that printer from a user that isn't on a windows.
    Do you have some ideas to help me?
    Best,
    Matteo

    Hello Matteo,
    Thanks for the post on the upgrade kit.  If you have not already, I might recommend posting this question to the link below.  Good Luck!
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Wireless printing upgrade kit

    COULD ANY ONE TELL ME PLEASE, I HAVE OFFICEJET ALL IN ONE  PRINTER 5610 , WOULD IT BE POSSIBLE TO MAKE MY PRINTER WIRELESS BY BUYING A  HP WIRELESS UPGRADE KIT
    HOPE SOME ONE MIGHT KNOW
    THANKS

    Yes, the 5610 is compatible with the HP Wireless Printing Upgrade Kit.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • Will Wireless Printing Upgrade Kit support All-in-one Printer F4235?

    I have not found this information in the forum, I hope someone will be able to help me.
    I purchased a Wireless Printing Upgrade Kit and I'm not sure if it is compatible with my printer. I have an all-in-one F4235. The list on the box does not list this model but it says also works with most other HP printers and all-in-ones. I have checked the website and it lists the same printer so I don't know if the list just has not be updated.
    I don't want to open the package until I know if it is compatible.

    Yes, the HP Deskjet F4235 (F4200 series) All-in-one supports the Wireless Upgrade kit.
    For more information, refer to the below weblink.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00783236&lc=en&dlc=en&cc=us〈=en&product=3200077 

  • Wireless Printing Upgrade Kit and Laserjet P1006

    Hello,
    I am just wondering if the HP Wireless Printing Upgrade Kit is compatible with the HP Laserjet P1006 printer. It is not listed on the compatibility list but I have read several accounts of people who claim to be using them together. I have also read posts that state they are not compatible. Either way, they will not work together for me so I am trying to figure out if it is something I am doing wrong in the setup or if the two pieces of hardware are simply not compatible. If anyone has any suggestions I would greatly appreciate it.
    Thanks,
    Lauren
    P.S. I am using a Dell XPS M1310 Notebook with Vista.

    Hi,
    I guess that would help:
    http://www.computerhuset.dk/PDF/hpljp1006.pdf
    In turn, I was wandering if one could get away without the PC dongle to avoid the PC looking like a porcupine and rely on the PC's bluetooth or Wi-Fi adapters.
    Best

  • What's the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?

    Hello!!
    What’s the difference between HP Wireless G Print Server and HP Wireless Printing Upgrade Kit?
    I found two things as follows.
    1. MAC support
    2. USB dongle
    Is there anything else?

    Now I’m clear!!
    But there are descriptions for each on your home page over view tab. Due to this forum restriction; I cannot put the URL here.
    They say for each as follows.
    HP Wireless Printing Upgrade Kit --- Retain full all-in-one wireless functionality: print, fax from your PC, scan, and access photo memory cards access and PC status
    HP Wireless G Print Server --- Get the same functionality with your all-in-one: printing, scanning, photo memory card access, PC faxing, and printer statusSo I got confusion, that’s why I did not get the difference for them.
    And I found wrong description on your HP support document page. I recommend that you correct it, because it put consumer into confusion and break to buy this product.
    The title is “HP Wireless Printing Upgrade Kit - Setting up the HP Printer with the HP Wireless Printing Upgrade Kit in Windows .”
    The wrong description is “NOTE:  You must turn on the computer with the computer adapter in order to print to the wireless product” at last line of “Step two: Configure other computers to use the printer. “
    You can erase this line!!

  • Will this HP WIRELESS PRINTING UPGRADE KIT work on officejet 5610

    Will this HP WIRELESS PRINTING UPGRADE KIT #Q6236A
    work on officejet 5610?
    This question was solved.
    View Solution.

    Hi,
    From user experience: yes. Please check the following post:
       http://h30434.www3.hp.com/t5/Printer-Networking-an​d-Wireless/HP-Q6236A-Wireless-Print-Server-and-HP-​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Problem with Time Capsule and Wireless Printing (Mac+PC Mixed)

    I have a time capsule that is the wireless router for the house and my iMac and laptops use the wireless network beautifully. I installed a Dell 1320C color laser printer by connecting it to the usb port on the time capsule. The airport express utility did NOT recognize any USB printer connected to the time capsule. I was however able to wireless print from my iMac by asking the printer utility to find all available printers which it did and then installing the printer drivers (thanks google). So, while i cannot find my printer as being connected to the time capsule through the airport utility, i can find it through the print utility as a connection through bonjour and i can print just fine to it.
    Now i installed bonjour on my laptops and found and selected the 1320c just fine. When i try to print through the laptops (pc), nothing happens and the file stays in the print queue.
    I am willing to live with the first quirk as I can print wirelessly from the iMac. I however need help to print from the laptops.
    Any suggestions?
    thank you so much in advance
    Mukund

    Mukund SRINIVASAN wrote:
    Once I connect the printer via ethernet to the time capsule, how do I
    1) see the printer on my iMAC - what utility do I run etc?
    It is connected to your network. Check your printer setup manual on how to set it up. Or go the the Dell website for printer support if you can't find your manual.
    2) can i then run bonjour from my windows laptops and see the printer through the network?
    Via ethernet, it shouldn't need Bonjour to set up.

  • Problem with Officejet Pro 8600 wireless printing

    HP Officejet Pro 8600 will no longer print wirelessly from laptop, but will from IPad and Android phone using Samsung and Google Print. Used to work fine. Unaware of any changes to settings in either printer or computer setup. Have gone thru all trouble shooting steps including rebooting computer, router, and printer. Computer is connected to internet and bluetooth is on and working. Computer finds the printer but says it's offline.  Printer settings say printer wireless is on and is connected to network but wireless light will not illuminate.
    As you can tell, I'm no expert. Experienced user, but not in wireless issues. Computer is Windows 8.1. I've read all the support info on this problem on the HP website and taken as many steps as looked appropriate (or I understood). Everything so far looks nominal except for the wireless light on the printer.
    Any thoughts?

    Well, I finally got it to work by resetting and rebooting everything, starting with the modem/router, then laptop, I-Pad, and Android phone. Wireless light on the printer doesn't seem to be an issue. My Att DSL line is spotty at best, giving the modem not much to work with. The interaction of all the elements is complex given the demands I put on them. I'm 75 and have owned so many computers and peripherals since 1982 that I've lost count of them. But they haven't gotten easier to work with. I should have taken training as a network administrator rather than real estate!

  • Problems with my new 6500A wireless printer

    I have a Linksys E3000 router, running Windows 7 Ultimate, and have my desktop hardwired to the router and ran the setup wizard on the printer, printed out the Network page and it had a IP address listed on the sheet.  Ran the software on the Computer and the software could not find the printer.  Ran that setup several times to no solution.  Am I missing something or is there something to correct this issue? Thanks

    Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    I would guess that your security system (antivirus) firewall is in the way.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.

    When trying to install a wireless printer, the WEP password says its incorrect. Is this a problem with the airport, my Internet provider or HP? I know the password is correct.

    Your AirPort Extreme supports WPA.
    WEP is outdated and considered fairly useless, so use WPA.
    Be sure you are using AirPort Utility  5.6. If you are not running Lion then use AirPort Utility 5.5.3.
    AirPort Utility 6.0 cannot administer 802.11b/g base stations.

  • Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

    Hi
    I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
    Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
    using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
    Thanks Portozzygirl

    More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
    http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
    http://captaindbg.com/how-to-update-drivers-on-windows-7/   (works on win 8 too)
    Wanikiya and Dyami--Team Zigzag

  • How do I install a wireless printer

    How do I install a wireless printer on my I pad 2?

    Your printer needs to have a technology called AirPrint built in on it.
    If it has wifi built in, it has a chance of working, as no non-wifi printers have AirPrint built in.
    If it does, your printer can work with the iPad.
    If it doesn't, you can purchase software for your Mac or PC that uses your computer as a little passthrough to connect and print from your printer.

  • Anyone else having problems with popups since the new security upgrade? can't get rid of them

    anyone else having problems with popups since the new security upgrade? can't get rid of them

    You may have inadvertently installed adware. You do not need to download or install anything to fix it. It ought not to be related to any Apple security update.
    For a description of how this may have occurred, how to avoid it in the future, and for Apple's recommended actions read How to install adware. Apple's instructions are linked in the Recovery Procedure near the end of that document. Read and follow them carefully. Pay particular attention to the easily overlooked passages directing you to restart your Mac when required.

  • HT4623 can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same proble

    can someone assist me with a solution to the problem with my iphone 5. I upgraded to IOS 6.1.4 and since then i have had the problem of No Sim. I restored to the factory settings using i tunes as i have my back up on my pc but still the same problem. I have swapped sim and my Sim is working on other iphone with ios 6.1.3

    Try a new SIM from your carrier.  If that doesn't work, make a Genius Bar appointment and get your phone evaluated.

Maybe you are looking for

  • Is it possible to download ÿōür purchased app into ÿōür other device by signing in iTunes?

    Is it possible to download ÿōür purchased app into ÿōür other device by signing in iTunes?

  • Abap+java stack

    Hi,   My sap is running on ecc6.0,linux with maxdb(abap+javastack) we are  taking backup  through database manager in tape.while restoring it will ask any java files. Thanku

  • Down Payment Adjust to Invoice Automatically?

    Hi, Is there any way or work around to clear vedor/customer down payment to vendor/customer invoice automatically without  transferring Spl GL amount to Invoice? Generally we will post down payment and then invoice and after that we will transfer dow

  • HOW TO SEARCH FOR  USER EXITV50R0002  IN VL01(delivery)

    HI ALL, Can any one of you pls tell me the navigation of how to get the user exit in the screen of vl01 or 03 (outbound delivery). But tis is not a customer exit which can be found by " call customer function".

  • Portal Uses 80% CPU

    Hi, My portal keeps on using 80% CPU and causes the server to be very slow and have to be restarted. Whenever I log in to the portal page and click on my discoverer portlet there, I always get Page Cannot Be Displayed. Can somebody help me on this is