Windows 2008 R2 Remote Desktop Service Role pickup 2012 RDS License Server.
I am installing Citrix onto a Windows 2008 R2 server as part of this I need to setup the RDS Role on the same box and then point it to the Windows RDS License server.
Our plan is to have a Windows 2012 License server for RDS Licenses i.e. install 2012 RDS Licenses.
I was wondering if it was possible for a 2008 R2 RDS role to pick up 2012 RDS Licneses from a Windows 2012 RDS Server?
Many thanks,
Steve
Hi Steve,
Thank you for posting in Windows Server Forum.
Yes, agree with TP’s comment. You can also check below interoperability matrix link for details.
RDS and TS CAL Interoperability Matrix
http://social.technet.microsoft.com/wiki/contents/articles/14988.rds-and-ts-cal-interoperability-matrix.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Similar Messages
-
Windows 2008 R2 Remote Desktop Services - user profile path not working
Trying to setup remote desktop profiles. We have 1 farm with 2 Windows 2008R2 RD session hosts and a broker server and want the all of the remote user profiles to reside on a dedicated profile server. We've created the user shares but when a remote
user logs in their user profiles is automatically created on the session hosts. Each remote users profile path is specified in AD under the user's Remote Desktop Profile tab.
I've seen posts about creating a GPO to handle roaming profiles but I'm not sure as to where this needs to be created...should it be done on each of the session hosts? Are their any step by step instructions out there on how to achieve this that I just haven't
found yet?
blHi,
Thank you for posting in Windows Server Forum.
Do you have RD Gateway setup in your environment?
Have you configure RD Connection Broker and set the Fully Qualified Domain Name (FQDN) of the RD Connection Broker server in case of RD Connection Broker mode. In RD Session mode, it is set to the FQDN of the RD Web Access server.
Client operating systems must trust the certificate with which the RemoteApp programs are signed. Suggest to install RDP 8.1 for client OS.
Do you have a trusted certificate with a matching name configured on your RDSH server in RD Session Host Configuration? (Means cert must match the name that clients use to connect to it for running the RemoteApp).
Hope it helps!
Thanks.
Dharmesh Solanki -
Intermittent Disconnects for clients of 2008 R2 Remote Desktop Services
Hello, I have an issue that I am trying to work on for a client who is experiencing intermittent disconnected sessions when logged into a Windows 2008 R2 Remote Desktop Services (RDS) server.
As I mentioned, the disconnect is intermittent in nature and almost appears to be network related, although I cannot find any data in the Application, System, or application specific logs to support that.
The RDS server overall does not exhibit any error, but the user's session is briefly interrupted and then restored. I would like to be able to gain some additional information about what is going on under the hood, but I am having trouble finding any
details on how to turn on debug logging for Terminal Services (er, RDS) on 2008 R2.
Can someone provide some additional details on what kind of logging or other means that I can take on this server in order to gain some additional insight?
Thanks in advance for any advice.Hi,
There are certain reason for which the client get disconnect from the server. The following are some of the commonly seen symptoms:
• You may be limited in the number of users who can connect simultaneously to a Remote Desktop session or Remote Desktop Services session.
• You may have a port assignment conflict.
• You may have an incorrectly-configured Authentication and Encryption setting.
• You may have a certificate corruption.
More information.
http://support.microsoft.com/kb/2477176
If you want to have log for login\logoff for the client on server end then you can get the information from below log.
Event Viewer>Application and Service Logs>Microsoft>Windows>TerminalServices-LocalSessionManager>Operational
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Findings:
Currently, Windows 2012 R2 AD DS role and RDS With Broker services can only seem to coexist properly in a new domain not an existing domain. Any attempt to add to an existing domain causes internal database user access denied issues and any attempt to
adjust rights and circumvent is dubious at best.
The escalation technician said it best. Out of 50 clients that want to do this, they end up not being able to help 5 right off the bat for whatever reason. As for the other 40 they might be able to help by running reports, adjusting rights and trying to add
the roles until it works. This can end up being a 20 day process. Basically they are playing whack-a-mole with user rights and permissions until something sticks.
We tried creating an OU where any other domain policies would not be inherited to see if that was the issue, a fresh install with different sequence of adding the Roles, no effect.
Given the errors I witnessed when running procmon and then trying to add the roles, the NT System and the Windows Internal database user had access denied issues on 100+ registry keys when trying to add the roles. After that the system is not behaving normally.
The errors displayed almost mirror the errors that would occur on Windows 2012 when those two roles would be added which of course is officially NOT supported on that system.
This blog needs serious revision:
http://blogs.msdn.com/b/rds/archive/2013/07/09/what-s-new-in-remote-desktop-services-for-windows-server-2012-r2.aspx
This is the excerpt from that blog: Single server RDS deployment including Active Directory. We now support running our RD Connection Broker role service on the same physical instance as an Active Directory Domain Controller. In addition, we published
guidelines for how RD Session Host could be used without the RD Connection Broker.
Microsoft Support was curteous and helpful and they were the ones who advised cutting our losses, which mirrored my hunch after seeing what was transpiring in the system. They refunded my money for the support call.
For me, it was an opportunity to find out if there was any way to configure Windows 2012 R2 in the Same manner that it was setup as Windows 2008 R2 and lay that to rest. The coexistence is poorly implemented. It is as if there was a reaction from all the deprecation
of bread and butter features such as shadowing in TS and the coexistence of AD DS and RDS to where those features were re-added haphazardly. (I have no complaints on shadowing on Windows 2012 R2 it works, just do not like having to go to server manager to
use it).
I opted for virtualizing the Domain controller to eliminate the incompatibility issues and that is what I will be doing from now on. I found free solutions for backing up and reporting for virtual machines as well as the suggested procedures for configruing
a Domain controller as a virtual machine on a Hyper-V environment and I will be sticking to those. Thus far the setup has been operational.
I am not allergic to virtualization, but for really small setups it adds additional time and considerations but if that is how it has to be done, so be it. Windows 2008 R2 days are numbered and since we can usually squeeze 5-7 years on quality server equipment,
buying a Windows 2008 R2 setup now is a borderline disservice in my opinion.
Hopefully someone finds this useful and saves some time.Hi,
Thank you for posting in Windows Server Forum.
Do you need any other assistance?
Based on your description, you are describing your story of successfully implementing RDS server with AD role and more regarding all RDS related scenario. For shadowing feature, you can use with command also. Below is the syntax to shadow a session.
mstsc /v:<ServerName> /shadow:<SessionID>
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support -
How to install the Remote Desktop Services role on a Windows 2012 R2 Server
Hello,
I am a bit confused on how to install the RDP role on a 2012 R2 server. I have a two server domain and would like to make the second member server an RDP server to host applications (Word, Excel, a medical software, etc.) where users from their windows
7 desktop will use the Remote Desktop Connection to connect to the server, create a session and do their work. When installing the role, I am prompted with two options:
1- Role-based or feature based installation
2- Remote Desktop services installation
I see the RDP install option in both cases.
1- Which one do I use?
2- What role services do I install? (Connection broker, Gateway, Licensing, Session Host, Virtualization host and Web access). I think I need the first four only.
3- When installing software after RDP, I use the Change user /install and Change user /execute commands. What happens to the software that is already installed? Can remote
users use those?
Any help will be very much appreciated.
Thank You,
Victor.TP,
Thank you for your response. I added the RD Licensing thru the Role-based option.
Also opened the local group policy thru gpedit.msc and added the server name and the licensing mode type to Computer Configuration -> Administrative Templates -> Windows Components -> Remote Desktop Services -> Remote Desktop Session
Host -> Licensing
Use the specified RD license servers = NameOfMyServer
Set the Remote Desktop licensing mode = TypeOfMyLicense (Per User in my case)
Thank you again,
Victor -
Windows 2008 R2 + Remote Desktop Web Access + Single Sign-On + 2 servers
Hi
First sorry for my English. I have got problem with run SSO with RDWeb. I configured everything follow this instructions: http://blogs.msdn.com/b/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx
and http://blogs.technet.com/b/mrsnrub/archive/2010/03/22/remote-desktop-services-websso.aspx. After logon to RDWeb web page I click application icon. Then I see dialog box for credentials - SSO not working.
I have got 2 servers with Windows Server 2008 R2 Standard:
Server OL-AP1 with role Remote Desktop Session Host (RDSH) and certificate for digital sign RemoteApps
Server OL-AP04 with ONLY Remote Desktop Web Access (RD Web) with certificate for https
Client PC: Windows 7 SP1 with installing certificate for OL-AP01 witch I used for digital sign RemoteApps
All certificates created by enterprise domain CA - Active Directory Certificate Services (AD CS)Hi,
Thank you for posting in Windows Server Forum.
Do you have RD Gateway setup in your environment?
Have you configure RD Connection Broker and set the Fully Qualified Domain Name (FQDN) of the RD Connection Broker server in case of RD Connection Broker mode. In RD Session mode, it is set to the FQDN of the RD Web Access server.
Client operating systems must trust the certificate with which the RemoteApp programs are signed. Suggest to install RDP 8.1 for client OS.
Do you have a trusted certificate with a matching name configured on your RDSH server in RD Session Host Configuration? (Means cert must match the name that clients use to connect to it for running the RemoteApp).
Hope it helps!
Thanks.
Dharmesh Solanki -
Remote Desktop Services Role on a Virtual Machine (VM) Requirements
Does MS recommend installing RDS Role on Hardware or Virtual Machine? I have a use case where I have about 35 people that will be using the Internet Explorer and possibly run additional piece of software. I'm having trouble determining if the RDS Role on
Virtual Machine will be able to sustain the load of so many users. Should the same performance metric used in hardware selection be appropriate to apply for Virtual Machines. We are using VMware on pretty powerful DELL hardware, which is also hosting
120 existing VMs as of now. So my questions is would VM with 4 CPU's, 8GB of RAM, 80 GB Virtual Disk and 1 GBPs NIC would be handle the job?Hi,
Thank you for posting in Windows Server Forum.
There is no any particular requirement to run RDS on physical or virtual machine. But if you want to install RD Virtulization role then you need to see that Hyper- V role installed because “when the RD Virtualization Host role service is installed, Server
Manager checks to see if Hyper-V is installed. If Hyper-V is not installed, Server Manager will install it”. And Hyper-V role cannot be installed on virtual machine so for that you need to install on Physical machine. Other all RDS role can be installed
on virtual machine also.
Install the Remote Desktop Virtualization Host Role Service
In addition, please check below articles.
1. Remote Desktop Services: Server and client requirements
2. RDS Hardware Sizing and Capacity Planning Guidance.
Hope it helps!
Thanks,
Dharmesh -
2008 R2 Remote Desktop Services Problems With Older RDP Clients
I recently deployed a new 2008 R2 server to serve as a Terminal Server (Remote Desktop Services) for about 30 people. The new server is replacing a 2003 server. I expected the new machine to be a considerable upgrade and was looking forward to happy people
and less problems. Reality is I am finding several unexpected headaches - discouraging considering the amount of money we have spent on the new machine.
Most of the users connect via HP thin clients, they are the T5510, T5520 and T5530 thin clients. What I have found is performance issues when connecting via these thin clients. I believe the RDP client on these thin clients is RDP 5.5 or earlier. And I do
not believe it is possible to upgrade the RDP client version on the thin clients - I guess they are to be seen as "disposable".
The performance issues are: black blocks appearing when connected - and I have deselected bitmap caching - makes no difference. When typing in certain places the display of the typed characters could not keep up with the user. And lastly I have a weird thing
that just popped up today; where if the user goes to Google it freezes up their entire environment - I cannot even remote control the user/session - why this came up today and was not a problem before I am not sure.
With all of the above issues I have found that the problem goes away or does not exist if I connect to the server using an RDP client on an XP or 7 computer. So I have to conclude the RDP client is the problem.
Does anyone have information on this? Is there anything I can do as far as configuration on the server to allow me to use these older RDP clients? Do I have any alternative other than buying new thin clients?
thanks!From your description, I also agree that the problem may be in the top RDP client.
1.
HP Compaq t5510 Thin Client:
Operating System: Microsoft Windows CE.NET
RDP Client: Remote Desktop 5.1 Add-On
2.
HP Compaq t5520 Thin Client:
Operating System: Microsoft Windows CE 5.0
RDP Client: Remote Desktop 5.5 Add-On
3.
HP Compaq t5530 Thin Client
Operating System: Microsoft Windows CE 5.0\6.0
RDP Client: Remote Desktop 5.5 Add-On
We can try to optimize two ways.
1.
Upgrading Driver – Network for Thin Client
(1) HP Compaq t5510 Thin Client:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=420576&prodTypeId=12454&prodSeriesId=420575&swLang=13&taskId=135&swEnvOID=1054
(2) HP Compaq t5520 Thin Client:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=500833&prodTypeId=12454&prodSeriesId=500832&swLang=13&taskId=135&swEnvOID=2051
(3) HP Compaq t5530 Thin Client
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01087297&prodTypeId=12454&prodSeriesId=3341951
Upgrading RDP to the latest version of HP Web site.
Let thin clients use to connect to the Remote desktop server with low load.
(1) Open the Remote desktop client in customer’s Thin Client
(2) Click Advanced option. In choose your connection speed to optimize performance area, you can select the low load option. For example, modem(56kbps).
I noticed that you have deselected bitmap caching in Remote Desktop Client options, but makes no difference. You can try again. Then please remember disconnect idle sessions and rational allocation of resources in Terminal Server.
Technology changes life…… -
Windows 2008 R2 Remote Desktop install Error on AD auth.
Hi ALL, I just did a clean install of Windows 2008 R2 and a refresh install of Business Object XI R3 sp3. When I try and have a user authenticate I get an error :
[repo_proxy 13] SessionFacade::openSession -
(com.crystaldecisions.sdk.exception.SDKException$SecurityError: The secWinAD
security plugin is not enabled. Contact your system administrator for
details. (FWB 00002)) [repo_bridge - BridgeSessionFacade::openSession]
On are other TS server that is just 2008 we don't get the error.
Could anyone point me in the right direction to troubleshoot this one.
-ithis error means that on this "refresh install of Business Object XI R3 sp3" AD authentication is not enabled.
you need to enable and configure AD in CMC, only then login with seWinAD autentication from client tools. -
To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1
Dear Sir,
Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
ThanksHi,
1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself). If you want you may configure these two settings via group policy setting instead. The path of the
group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
-TP -
Windows 2012r2 Remote desktop services: session based: Locked down
I am trying to lock down the remote desktop services sessions , just like I did with windows 2003 TS.
I am following this article :
http://www.it.ltsoy.com/windows/lock-down-remote-desktop-services-server-2012/
I have done till disable registry modifications.
I stopped to check if the changes made were in effect before continuing.
What did work is the disable server manager popup at user logon.
Nothing else seems to have taken effect: just to mention a few
Microsoft administrative tools,
network and sharing center.
ABCD drives are still being seen.
What did I miss ?
regards
Leopold
(first time I am doing gpo with > ms 2003) so maybe I am doing something wrong.)Hi Leopold,
Here is related article below for you:
How to restrict users from accessing local drives of an RD Session Host server while using RemoteApp programs
http://blogs.msdn.com/b/rds/archive/2011/05/26/how-to-restrict-users-from-accessing-local-drives-of-an-rd-session-host-server-while-using-remoteapp-programs.aspx
If the group policy setting doesn’t take effect, please log off users then log back on.
If the issue persists, please run GPresult.exe to determine whether the setting is applied to users.
Gpresult
https://technet.microsoft.com/en-us/library/cc733160.aspx?f=255&MSPPError=-2147217396
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Hello, dear colleagues.
We are using Windows Server 2012 R2 as Remote Desktop Server. Also use Windows Server 2008 R2 with Remote Desktop Service Manager to control RDS user sessions (Send Message, Disconnect, Logoff, Query Info).
Send Message, Disconnect, Logoff options works only for users in Administrators group.
I can't to configure permissions for Remote Desktop Users, specific user or AD group.
To set permissions I'm running RDS Host Configuration on Windows Server 2008 R2 and connect to Windows Server 2012 R2. Then double-click
RDP-Tcp, Security tab, add specific user account , AD group or configure
advanced permissions
for Remote Desktop Users.
But, as I sad above, these options works only for users in Administrators group. How to make it work for Remote Desktop Users or specific user, AD group?
Thanks.
P.S. If move specific user from Remote Desktop Users group to Administrators group on
Windows Server 2012 R2 - it works.Hi,
You can prevent administrators from changing the permissions for a connection by applying the
Do not allow local administrators to customize permissions Group Policy setting.
This Group Policy setting is located in Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security
Apart there is one command with which you can set the permission for that check the related
article. Additionally checkthis
thread for more detail.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Questions in regards to server 2012R2 Remote desktop Service deployment and GPO
Hi Everyone
We have a business requirement moving to 2012R2 RDSH server. I have installed a 2012R2 member servers and enabled Remote desktop licensing role. I have activated the licenses. the servers is in operational
I have deployed 3 windows 2012R2 member server "RDS1" , "RDS2" and "RDS3".
on RDS1 I ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation.
On RDS1 Server Manage Dashboard Page Select Remote Desktop Services > Overview. Under RD Licensing I added my 2012R2 license server "2012r2-tslic". Go to task. Edit deployment properties RD license mode to per device and click OK.
Reboot RDS1
Check RD Licensing Diagnoser everything is clear
On RDS2 I did the exact same thing ran Add roles and Feature Wizard > Remote Desktop Services installation > Quick Start >Session based desktop deployment to complete the installation.
But With RDS2 I move this server to an OU that link to a GPO with RD licensing details. after reboot the servers check RD Licensing Diagnoser I can see 2012r2-tslic specified as the license servers.
Based on this document
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx Are you suppose to configure RD license server via Remote desktop Service deployment ? Not GPO ?
Here are my questions
We currently have ten 2008r2 terminal servers in a NLB cluster. each RDSH server have in house application installed on each one of them. User connect to the 2008R2 RDSH servers via RDP connection. we have a restricted GPO apply to those
RDSH servers. user cannot do anything on RDSH servers apart from running the application and use excel. On the remote desktop session host configuration we have enable settings like end a disconnected session , Active session limit ,
remote control users session , LPT port redirection.
We push out RD license server detail via GPO to the terminal servers
Can I use our existing GPO apply the licensing server settings , desktop restriction setting to the 2012R2 RDHS servers or we should be using Remote desktop Service deployment to do the job ? If that is the case how would you transfer the
current 2008r2 environment to 2012 using Remote desktop Service deployment. is that mean I have to manually configure 1 by 1.
Please help
Many thanksHi,
Please see my response to you in the other thread. Please contact me via email and I will go over the basic planning and deployment steps with you which will help clear things up and get you started off on the right foot.
You should only run through the wizard and create a RDS deployment once. Then you add the various servers (RDSH, RD Licensing, RD Gateway, etc), set Deployment properties, etc.
Thanks.
-TP -
Terminal Services (TS) or Remote Desktop Services (RDS) scenario clarifications
Dear Support,
Question:
Do I still need to purchase RDS CALS license? or can use MSDN CALs in the Terminal Server?
Due to MSDN subscribers are End users, do not use Production Data and have to demo their developed applications to other End users group.
Scenario:
1. Use only Remote Desktop Session.
2. End users are MSDN Subscribers. (Although stated by Microsoft End users are non MSDN subscribers)
3. End users demo applications to End users.
4. End users develop their applications and have to demo to other End users group.
From MSDN link:
Client Access Licenses for Terminal Services
With an MSDN subscription, you are allowed to provide end users access to Internet demonstrations of your programs via Terminal Services (Windows Server 2003 or Windows Server 2008) or Remote Desktop Services (Windows Server 2008 R2). Up to 200 anonymous
users can simultaneously access your demonstration this way. Your demonstration must not use production data. MSDN subscribers are licensed to demonstrate their applications to end users,
but Terminal Services (TS) or Remote Desktop Services (RDS) is the only scenario where end users without an MSDN subscription can interact with the demonstration application while the software is licensed through MSDN subscriptions.
Accessing CALs
MSDN subscribers can access CALs for demonstration purposes through the
Product keys page of MSDN Subscriber Downloads. Please access the documentation resources online for assistance with the
Terminal Server activation process. If you have any questions, please visit the Microsoft
Terminal Services forum.
Mary LeeHi
Please call the licensing to be sure. In the USA (866) 230-0560 or
[email protected]
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it! -
User profile vs Remote Desktop Services Profile
On a Windows 2008 R2 Domain Controller, if you open properties of an user account, you'd see
a Profile Tab as well as Remote Desktop Services Profile Tab.
I found this very confusing, can any one tell be the key difference between those 2?
If I don't specify Remote Desktop Services Profile path, when I logon to Remote Desktop Server, it seems take user's
romaing profile.
Anyway, please advice.
Thank you.Hi,
Thank you for posting in Windows Server Forum.
The profile tab of the user properties window allows you to configure user profile, logon scripts and home folder details for the user object. It is very useful when you have to allow your user access the same environment and data irrespective of the machine
he logs in from.
Active Directory User properties – Profile tab
Remote Desktop Services User Properties
You can specify a Remote Desktop Services-specific profile path and home folder for a user connecting to an RD Session Host server. This profile and home folder will only be used for Remote Desktop Services sessions. You should assign a separate profile for
Remote Desktop Services sessions because many of the common options that are stored in profiles, such as screen savers and animated menu affects, are not desirable when using Remote Desktop Services.
Manage User Profiles for Remote Desktop Services
http://technet.microsoft.com/en-us/library/cc742820.aspx
User Profiles on Windows Server 2008 R2 Remote Desktop Services
http://blogs.msdn.com/b/rds/archive/2009/06/02/user-profiles-on-windows-server-2008-r2-remote-desktop-services.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Maybe you are looking for
-
HT204053 How do I set my ipod up with itunes under same account
How do I set up my ipod up with itunes under the same account?
-
Hi everyone, I just received my Smartband 30 yersterday, and today a band on the screen frooze. Actually it frozze on the minute part so basicaly there is a lighter band on the screen with the 26 of the minute (when it frooze). When i change pages t
-
My HP Photosmart Premium C309g-m failed to connect wirelessly to my router
When setting up my printer to connect to my wireless router, the printer can see the network Name (SSID) but failed to connect to it using WEP password. The Wireless Network Report shows the printer Authentication Type is "Open System" while my rout
-
Disk Utility can't repair Time Machine + HDneeds to be repaired using the Recovery HD
Time Machine does back up. In fact it does not even show up on my desktop. I used didk utility and msg I got is below. I am in a place where I cannot even buy a flash drive. My harddisk is malfunctioning. Its hard to restart from the 'sleep' mode, s
-
Reversal process of return excise document
Dear all, My user has created and posted a return excise invoice. On posting it has created an excise invoice number and an accounting number. Now it is noticed that while processing the return excise he had manually inputed some wrong values manuall