Windows 2008 server OS authenticated user keeps failing

I have a new server that has windows 2008 server installed, 64-bit. I've installed oracle 11gR2 64-bit and have created my database. Now I need to create two oracle accounts that are OS authenticated and I can't seem to get this right. I've set os_authent_prefix in my spfile and I've created the user (example) OS$<domain>\<username> in the database. In Windows, the account name equals <username> and that account belongs to Administrators and ora_dba groups. I've tried creating the oracle user with <domain> in caps and lowercase, but both fail. On the server, the domain is all lower case.
So in SQL> create user "OS$my.domain.mil\user1" identified externally; (user created)
Grant connect to "OS$my.domain.mil\user1";
Log out of sqlplus, pull up command prompt in Windows 2008 server as 'user1' and type in "sqlplus /"
Invalid username or password.
What am I missing here? Any help appreciated.
SA feedback: "Finally, Windows Server 2008 R2 Operating System has a tighter security scheme than that of previous Windows OS.
Also, it would be helpful if I remove the AD domain controller role from this server. This may require reinstallation of this server (worst case). Let me know when I can do this so you can proceed with your configuration."
Edited by: wolfeet on Jun 21, 2011 5:02 PM

Hello Ricardo,
You may want to reference SAP Note 1054740 - SAP System Installation on Windows Server 2008
and ensure you are on SAP Netweaver 7.0 SR3 or above, and it will also tell you if the product you are installing is supported in Windows 2008 Server.
For database and SAP product combinations that are already
supported by SAP to run on Windows Server 2008, see the Product
Availability Matrix at: http://service.sap.com/pam
Also check the following: in Regedit.
SYSTEM\CurrentControlSet\Services\gpsvc
Right click on it and select "Permissions" in the context menu.
Provide "Full Control" for sidadm
Does the installation user has full administrative rights and belongs
to the group of LocalAdministrators and to Global Administrators also
when you are doing a domain installation ?
Please ensure the user <sid>adm has the access rights
to change the file system permission.
Regards,
Paul

Similar Messages

Windows 2008 Server R2 - Service Pack 1 Failed to install

A few nights ago I deployed Service Pack 1 for Windows 2008 Server R2 x64. The update failed to install after 3 attempts using the Windows Update manager. After the third time I checked the system properties which states that SP1 is
installed, yet it never appeared to install successfully as my other server machine had a prompt stating the SP was installed successfully.
In update history it shows the 3 failed attempts with no successes. This morning I began running into memory errors which are impacting my 2 VM Ware sessions which in turn lock up my virtual machine so I am going to attempt to remove and reinstall
to see if this corrects my issue. By the way what triggered the install of SP1 is random reboots of my server. This is that unknown Kernal Power Error which I have yet to resolve. Some months my server randomly reboots one time and other
months 4-5x. That is neither here nor there, the point of this discussion is to resolve SP1.
I have tried to remove SP1 by means of Control Panel, Programs and Features, Installed Updates. So it shows the that the SP1 installed in multiple areas yet in the install history no signs of successful installation.
When trying to uninstall from Program and Features/Installed Updates section in control panel it cycles through like its going to uninstall, but after several minutes I receive the following error      Windows Update
An error has occurred. Not all of the updates were successfully uninstalled.
When trying to uninstall from the command prompt (as administrator) "wusa.exe /uninstall /kb:976932" I get the following popup            Windows Update Standalone Installer
Installer encountered an error: 0x80073712       The component store has been corrupted.
Now if I try and install through the network installer file name "windows6.1-KB976932-X64.exe" I get "Windows Server 2008 R2 Service Pack 1 is already installed"
I performed these steps in the order mentioned which I came across this "System Update Readiness Tool for Windows Server 2008 R2 x64 Edition (KB947821) [February 2011]" After applying this hotfix I went through the same steps as mentioned above with the
exact same results.
It is unfortuante I did not come across this hotfix before I attempted install SP1 as it appears as if this would have prepared the system for SP1 installation. Currently I am in limbo with a corrupt installation of SP1 and so far no means of uninstalling
short of a reinstallation or repair of the OS which I am not willing to do at this point in time.
If anyone has any suggestions please chime in and let me know what I can try. Thanks for all the support and hopefully this post will help others in the future.

Maybe a little bit late, but I was running almost same problem on a exchange server.
Scenario:
First attempt to Update the windows patches - excluded the patches from the last 2 months.
I was kind a new to this, and didnt noticed that Windows Service pack must have at least 8GB free disk space.(Recommended)
So the C:\ partition had less then 5 GB free disk space, and I started the updates.
All went well until Windows SP1 begun running to downloading and installing.
When the installer noticed there wasnt enough space, It stopped, it give the status Failed, en when scaling up the C:\partition with another 10GB more space, the C:\partition had 18GB free disk space.
Tried to Call up a new attemp to install the SP1... but with no succes to start the SP1 installation...
I tried to reinstall but the windows update didnt get offered again to install again or resume or anything to try again...
Maybe...it is handy for Mickysoft, to check before installing, so the install wont get corrupted, and can install when c:\ partition has enough disk space.
What was the trick:
1) Stop the windows Update Service
2) C:\Windows\SoftwareDistribution\DataStore - Delete content
3) C:\Windows\SoftwareDistribution\Download - Delete content
4) Windows update Service check if its runs again
5) Check again for windows updates - Check if Windows Server Service pack 1 is offered, and install reboot and youre good to go.
It works for me :) hopefully after 3 years you had found a solution, but since I was poping for a solution and found this article with no solution.
I tought it will be hopefull for others to respond to this article with a solution.
Kind regards,
Alexander Tjintjelaar
Micky soft noob

Windows 2008 Server - Cannot run Active Directory Users and Computers

Hi,
I am running Windows 2008 Server with latest windows updates installed. Directory Services Role also.
I attempt to open Active Directory Users and Computers tool and I get a;
Microsoft Visual C++ Runtime Library error;
"The Application has requested the runtime to terminate it in a unusual way. Please contact the application's support team for more information"
I click ok, then get the following debug info;
Problem signature:
Problem Event Name: APPCRASH
Application Name: mmc.exe
Application Version: 6.0.6001.18000
Application Timestamp: 47919524
Fault Module Name: msvcrt.dll
Fault Module Version: 7.0.6001.18000
Fault Module Timestamp: 4791ad6b
Exception Code: 40000015
Exception Offset: 0000000000029b06
OS Version: 6.0.6001.2.1.0.272.7
Locale ID: 3081
Additional Information 1: 43aa
Additional Information 2: cf3a46656318492c1997480001b6b0e0
Additional Information 3: 3837
Additional Information 4: 92f72e0d0589ff77cef51e0a413aeff6
Read our privacy statement:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0409
If someone could please assist, it would be very much appreciated.
Regards
B

Hi,
To solidly troubleshoot this kind of issue, we need to debug dump file. A suggestion would be to contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
However, I am also glad to share my research.
Some third party applications may lead to this error. Please check if you install other third party applications on Windows server 2008?
Also, please follow the article below to perform necessary steps to see how it's going?
FIX: You receive an "invalid page fault in module MSVCRT.DLL" error message after you install the run-time libraries from Visual C++ 6.0
http://support.microsoft.com/kb/190536/en-us
Hope this helps.
Best wishes
Morgan Che

Mac os x wiki server can't authenticate user password from active directory recently after we upgraded to windows 2008 server.

after upgraded to windows 2008 server, our mac os x wiki server can't authenticate user password anymore. How can I re-bind the wiki server to the AD again? thanks in advance.

Solved it by deleting the user and creating a new one with the same userID.
Maybe it occured because I marked the "user has to change password after first login" box when resetting the password but didn't yet allow him to do so in the webpages menu?!?

Installing CF8.0.1 64 on Windows 2008 Serv

Does anyone have a set of instructions on installing CF8.0.1
64bit on Windows 2008 Server. I have tried on and off for the last
two weeks and have made no progress. The install goes great,
however the CF administrator component of the install fails with a
HTTP Error 500.0 - Internal Server Error. IIS7 worked fine prior to
coldfusion installation, however once CF 8.0.1 gets installed IIS7
appears to break. I've read the other thread in the forum and the
suggestions made there don't help or have already been done.
Module IsapiModule
Notification ExecuteRequestHandler
Handler AboMapperCustom-72626
Error Code 0x800700c1
Most likely causes:
- IIS received the request; however, an internal error
occurred during the processing of the request. The root cause of
this error depends on which module handles the request and what was
happening in the worker process when this error occurred.
- IIS was not able to access the web.config file for the Web
site or application. This can occur if the NTFS permissions are set
incorrectly.
-IIS was not able to process configuration for the Web site
or application.
-The authenticated user does not have permission to use this
DLL.
-The request is mapped to a managed handler but the .NET
Extensibility Feature is not installed.
Things to try (from the error summary page)
- Ensure that the NTFS permissions for the web.config file
are correct and allow access to the Web server's machine account.
- Check the event logs to see if any additional information
was logged.
- Verify the permissions for the DLL.
- Install the .NET Extensibility feature if the request is
mapped to a managed handler.
- Create a tracing rule to track failed requests for this
HTTP status code.
Adobe in going to expect a $6700 check from me in another
week or so and the damn thing doesn't install to the point where
the demo's will run. Windows 2008 and IIS7 isn't that new and I
can't imagine that the number of people having done this is limited
to the one or two in this forum and that there is no technote avail
to us that have to depend on internet support and published
technotes that can document the installation procedure of CF 8.0.1
64bit on windows 2008.
It's the fourth of July and this is a fine place to be.
Happy 4th everyone!

Please see this link:
http://www.jasonholden.com/blog/index.cfm/2008/5/6/Coldfusion-8-on-Windows-Server-2008

Error connecting to the SAP SRV on Windows 2008 Server platform

Hi All
We have a problem with one of our clients they bought a new sbs windows server 2008 and we loaded sql 2005 and sap b1 SP01 PL07.
When we did the SBO install we experience connection issues and we created odbc connection on the server using named pipes and tcp/ip (used both server name and Ip address).
We also configured the server in configuration manager and we managed to login and solved the slow system connection issue. We also created odbc connection on the client machines. (Machine are on a workgroup and users have administration access on all machines),we also installed native client on all machines.
After the first batch of client installs we managed to have connection, they were other computers which were left out during the first client install and now the client want to do the remaining machines connected to SBO. On every machine that we install now we get the same error :-
*Connection failed:
SQLState:'08001'
SQl Server error:10060
[Microsoft][SQL Native Client] TCP Provider: A connection attempt failed because the connected party didnot properly repsond after a period of time, or established connection failed because connected host has failed to respond.
Connectioin failed:
SQLState:'HYT00'
SQL Server Error:0
[Microsoft][SQL Native Client]Login timeout expired
Connection failed:
SQLState:'08001'
SQL Server Error: 10060
[Microsoft][SQL Native client] An error has occurred while establishing a connection to the server. When connecting to the sql server 2005, this failure may be cause by the that*
Please help as most user who need access can't login and they are the main users.
rgds,
Bongani Dlamini

Hi Eric,
yes we are using Windows 2008 SBS for the SAP EHP4 FOR SAP ERP 6.0/NW7.01 installation.
we tried to create the key but it says access is denied.
Actual thing is we got the server with Windows 2008 server 64 bit SBS (standard FE) with Domain Controller (DC) configuration.
We have removed the DC using dcpromo to convert into Wokgroup and tried the SAP installation.
I hope you got the idea and please let me know any further suggestions or it is the problem with the license.
Thanks & Regards,
Prabhu Reddy.

Windows 2008 Server License Key not working on VirtualBox

I have a validated licensed copy of Windows 2008 Server and I need to load it on a Virtual machine (I am running Oracle VirtualBox). When I had the server running on a hardware based server it worked fine. The license key activated and it worked. Now when
I load it onto the VirtualBox solution it fails. It will take it when I run the manual command but will not show my server as activated. This is for my private use only (internal home LAN) but I would prefer to have the activation be correct since I use this
setup to help keep fresh on Windows 2008 servers while being on a Linux OS with a VM software loaded. What can I do to have this server activate correctly under the VirtualBox?
Thanks,
Tom

Hi Tom,
Base on my experience, after we convert a physical computer system to virtualize environment we need to reactive it, with MAK active method we need keep this vm to connect to
internet and with KMS method please confirm this vm can communicate with your KMS server.
The related KB:
Understanding MAK Activation
https://technet.microsoft.com/en-us/library/ff793435.aspx
Volume Activation in Disconnected Environments
https://technet.microsoft.com/en-us/library/dd981010.aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Install and uninstall of Oracle 11g R2 on Windows 2008 Server

Hi,
I installed Oracle 11g R2 and set up a database on Windows 2008 Server following the steps in the Installation Guide and it was successful. After uninstalling the product and doing a re-install, the step to configure the Net Configuration Assistant fails with the following msg.
Failed to allocate port(s) in the specified range(s) for the following process(es): JMS
[5540-5559], RMI [5520-5539], Database Control [5500-5519], EM Agent [3938] | [1830-1849]
Also, when I ran "netca.bat" and tried to reconfigure the Listener, it indicated the default port 1521 is being used. I ran "netstat -an" and do not see the port listed.
Questions:
What is the best way to check if something was leftover from my previous install of Oracle that is using the default ports?
What do I need to do to ensure a re-install is successful?
Uninstalling Oracle -
1.     Log in as the Administrator.
2.     Stop all Oracle Services.
3.     From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4.     Delete the C:\app\oracle directory.
5.     Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

Johan, after I uninstalled Oracle, I checked to ensure there were no remaining Oracle services remaining.
Srini, below are the steps I followed to uninstall Oracle. In step 3, I just ran deinstall.bat without any parameters and provided required information as prompted. Note, I uninstalled using the Administrator user and not the "oracle" account that I used to install Oracle.
Uninstalling Oracle -
1. Log in as the Administrator.
2. Stop all Oracle Services.
3. From a cmd window, run C:\app\oracle\product\11.2.0\dbhome_1\deinstall\deinstall.bat.
4. Delete the C:\app\oracle directory.
5. Remove the following registry entries as per http://download.oracle.com/docs/cd/E11882_01/relnotes.112/e16777/toc.htm:
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle Services for MTS
HKLM\System\CurrentControlSet\Services\EventLog\Application\OracleDBConsole<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.<SID>
HKLM\System\CurrentControlSet\Services\EventLog\Application\Oracle.VSSWriter.<SID>
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Oracle11

WLC 5508 LDAP Windows 2008 Server - auth based on AD groups

hi NG,
i'm trying to web-authenticate my Wifi user of an WLC 5508 against LDAP.
Thereby i'm trying to autenticate all users within a GROUP, not an OU within the MS Active Directory based upon an Windows 2008 Server.
I can authenticate against a user, witch is beeing put into an OU, according to examples based here: https://www.cisco.com/en/US/products/ps6366/prod_configuration_examples_list.html
Checking based upon Users within OUs works fine.
But i have not got all of those users wihin one single OU!
Need help for following:    LDAP-Auth based on AD Groups:
Using:
MS-Domain:                          MY-DOMAIN.CH
AD-GROUP:                          VPN-USERS
AD-Structure:
MY-DOMAIN.CH
|
GROUPS
        |
    Administrative Groups
                      |
                 VPN-USERS
                          (-> Member of this Groups (Wireless1, Wirless2, ...)
Server Adress:               IP.IP.IP.IP
Port:                                 389
Enable Server Stats      YES
Simple Bind                    Authenticated
Bind Username              LDAP-USER
Bind Password               supersecret
Bind Passw. confirm      supersecret
User Base DN:               ?-1-?
User Attribute:                ?-2-?
User Object Type:          Person
Server Timeout               2
What happens for instance, if i put a GROUP within a GROUP regarding the LDAP Authentication.
I guess i have to authenticate against the "upper" GROUP, or do i have to create an entry on the WLC for every GROUP i'm questoning?
Could some one provide my with an example, since i have not found documentation regarding this topic.
Thank you.

Hi,
User Base DN : this is in case you want to restrict the search area. If you put "dc=mydomain,dc=CH", you will search your whole AD. Depending on the size, it can be slow ...
Remember that the User Base DN is also used for the admin user.
In conclusion, User Base DN should be the most restrictive path that leads to both the admins and the users you want to authenticate.
Example :
OU=Employees,OU=Humans,DC=Mydomain,DC=CH
This would prevent to search in machines or any assets. This implies that the admin you bind with is an employee and you are only authenticating employees. You can have any number of OUs under employees, it doesn't matter
Attribute : This is the object attribute that the WLC uses to compare with the user name. In general, you would go with sAMAccountName in AD. CN would be another common example for LDAP databases.
If what you are looking for is to restrict access and only authenticate people who belong to a certain group. Then you need a radius server like ACS.
That server will be able to make selections and check the "memberOf" attribute to make sure it is in a certain group.
Nicolas
===
Don't forget to rate answers that you find useful

Error Installing Print Driver on Windows 2008 Server R2

I am getting an error installing the Xerox Print driver on Windows 2008 R2. Here is the event viewer detail. Any ideas?
Log Name: Microsoft-Windows-PrintService/Admin
Source: Microsoft-Windows-PrintService
Date: 06/24/2014 10:47:11 AM
Event ID: 215
Task Category: Installing a printer driver
Level: Error
Keywords: Printer Setup,Printer
User: SYSTEM
Computer: IHE-DEV8NEW-11V.Americas.mittalco.com
Description:
Installing printer driver Xerox ColorQube 9303 PS failed, error code 0x0, HRESULT 0x80070705. See the event user data for context information.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-PrintService" Guid="{747EF6FD-E535-4D16-B510-42C90F6873A1}" />
<EventID>215</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>19</Task>
<Opcode>12</Opcode>
<Keywords>0x8000000000000220</Keywords>
<TimeCreated SystemTime="2014-06-24T15:47:11.407265800Z" />
<EventRecordID>82</EventRecordID>
<Correlation />
<Execution ProcessID="1124" ThreadID="3836" />
<Channel>Microsoft-Windows-PrintService/Admin</Channel>
<Computer>IHE-DEV8NEW-11V.Americas.mittalco.com</Computer>
<Security UserID="S-1-5-18" />
</System>
<UserData>
<SetupInstallPrinterDriver xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://manifests.microsoft.com/win/2005/08/windows/printing/spooler/core/events">
<Label>InternalInstallPrinterDriverFromPackage</Label>
<Message>pfnPSetupParseInfAndCommitFileQueue failed</Message>
<AdditionalInfo>-</AdditionalInfo>
<InfPath>-</InfPath>
<DriverName>Xerox ColorQube 9303 PS</DriverName>
<InstallSection>-</InstallSection>
<ProcessorArchitecture>Windows x64</ProcessorArchitecture>
<PackageAware>Not package aware</PackageAware>
<CoreDriverDependencies>-</CoreDriverDependencies>
<LastError>0x0</LastError>
<HResult>0x80070705</HResult>
</SetupInstallPrinterDriver>
</UserData>
</Event>
Ray Pietrzak

Hi Ray,
On current situation, please refer to the following KB and check if set
Point and Print Restrictions policy to Disabled. Then monitor the result.
Event ID's commonly associated with point and print
restrictions
In addition, I noticed that there was a thread which you created one year ago. It seems to be similar with
current issue. However, please have a look.
Windows
2008 Server
If I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

JFServer.exe fault in Windows 2008 server with Central V 5.7

I have an installation of Central 5.7 running 6 instances on Windows 2008 server 64 bit and have noticed that the six instances don't always come up when the machine is rebooted. Here is the error that it logs in the Central Log.
"Open of table 'C:\Users\Userid|Appdata\Local\Temp\JFX8A00.tmp' failed.
This also sometimes happens when I make changes to jobs in one of the instances and there seems to be no pattern wo what instances it happens in.
This behavior does not appear to happen with Central 5.7 running on XP or 2003 server.
Any thoughts on why this might be happening?

This is a recently known issue specific to Central on Windows 2008
Contact Adobe Support to obtain the patch. You can find their contact details in your support agreement.

Connect to DB2 from oracle 11g on windows 2008 server

Hi Folks,
I want to conenct to DB2 from oracle 11g using DB link.
DB2 :
user : db2user
pwd : db2pwd
database : db2database (OSBLDEV)
able to connect to db2 server (installed on machine M1) using db2 client with above details from machine M2 (where oracle is installed).
Oracle :
user : orauser
pwd : orapwd
host : orahost
port : 1521
service : oraservice
able to connect to oracle server using oracle sql developer with above details on Machine M2 (windows 2008 server)
when i execute the query with database link
select row_id from siebel.s_org_ext@OSBLDEV;
I get the message : ORA-12154: TNS:could not resolve the connect identifier specified.
could you pls check and let me know whether the below enteries are correct or not.
Pls share if you have step by step connectivity from DB2 to oracle using DB link.
1. I have created the Data source for DB2 - test successful
create database link OSBLDEV
connect to "db2user"
identified by "ldb2pwd"
using 'OSBLDEV';
1. I have made the following entry in E:\oracle\product\11.1.0\db_1\hs\admin\initosbldev.ora
HS_FDS_CONNECT_INFO = OSBLDEV
HS_FDS_TRACE_LEVEL = 0
2. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\tnsnames.ora
OSBLDEV =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(CONNECT_DATA=(SID=OSBLDEV))
(HS=OK)
3. I have made the following entry in E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN\listener.ora and releoaded the listner (lsnrctl reload)
LISTENER =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST=orahost)(PORT=1521))
(ADDRESS=(PROTOCOL=ipc)(KEY=PNPKEY)))
SID_LIST_LISTENER=
(SID_LIST=
     (SID_DESC = # this is the entry for HSODBC
     (SID_NAME = OSBLDEV)
     (ORACLE_HOME = e:\oracle\product\11.1.0\db_1)
     (PROGRAM = hsodbc)
Thanks in advance.

1. My listener.ora is placed at the below location:
E:\oracle\product\11.1.0\db_1\NETWORK\ADMIN
2. I have modifed the listener and removed the entry - hsodbc
3. stop and start the listener.
still can't see the service entry in listener status.
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.1.0.7.0 - Production on 19-JUL-2010 02:27
:08
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.1.0.7.0 - Produ
ction
Start Date 19-JUL-2010 02:21:17
Uptime 0 days 0 hr. 5 min. 52 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File e:\oracle\diag\tnslsnr\DALDEVDBCRM1\listener\alert\log
.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=daldevdbcrm1.corp.nai.org)(PORT=1521
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "+ASM_XPT" has 1 instance(s).
Instance "+asm1", status READY, has 1 handler(s) for this service...
Service "ARIBADEV" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBADEV_XPT" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "ARIBAXDB" has 1 instance(s).
Instance "ariba", status READY, has 1 handler(s) for this service...
Service "aiad.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiadXDB.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 1 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aiad_XPT.corp.nai.org" has 2 instance(s).
Instance "aiad1", status READY, has 2 handler(s) for this service...
Instance "aiad2", status READY, has 1 handler(s) for this service...
Service "aianew" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianewXDB" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
Service "aianew_XPT" has 1 instance(s).
Instance "aianew", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\>

How to install Cisco Work 3.2 on Windows 2008 Server Standard R2

Hi Everyone,
I have got Cisco Works LAN Management 3.2. But the problem is that i have a Windows 2008 Server Standard R2 and when i try to install, it fails. What I read from the below link is that it supports
"Windows 2008 Server Standard and Enterprise Edition with Service Pack 1 and 2. Both 32-bit and 64-bit operating systems are supported on the above versions."
http://www.cisco.com/en/US/partner/prod/collateral/netmgtsw/ps6504/ps6528/ps2425/data_sheet_c78-534877.html
Please help me out on how i should install on the Windows 2008 Server Standard R2. If there is any patch or any other way out.
Awaiting your response.
Farid

Hi ,
LMS 3.2 is not supported on Windows 2008 Server Standard R2.
here is the supported platoform for LMS 3.2
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/3.2/install/guide1/prereq.html#wp1110367
Thanks,
Gaganjeet

HT1420 I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to

I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to solve this problem?!

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

Windows 2008 Server crashed - How to find location of remote shared files that they used to access on remote web app?

We have a client that was running windows 2008 server. A previous IT person had setup their system, so we were walking into a situation where there were many unknowns. Server was mainly handling emails only, and we were able to get their exchange
database off and export PSTs to hosted exchange via microsoft.
Everything went fine with that, however one user said that he used to access files on the server via the remote web app as he described. He would go to the following url:
https://mail.theirdomain.com/remote/menu.aspx#
and he would use his login and then he would see several links to folders. He could then click on those and see his desired files.
We were able to get the server booted again, however we could not find any of the files he described on it at all, leaving me to suspect that perhaps this remote link was accessing another PC.
We have the old server up and running, however the link above is no longer active because we have pointed the domain to the new hosted exchange server. As I am still learning and my boss wanted me to research this on my own and figure out how to find
out where these files are located. Any advice would be greatly appreciated.
Just as a note I did try access mail.localhost.com/remote/menu.aspx# on the server but this did not work. Is there any way in the IIS 7 management console to figure out where this was pointing to?

I figured it out - The server was using sharepoint to host these files. I browsed localhost:987 and opened the sharepoint site locally on the server. They had several documents to be exported, however when clicking on Open in Explorer it was
giving an error that local client was not configured. I installed Desktop Experience and after that was able to open it in Windows Explorer and copy all files off.

Windows 2008 server OS authenticated user keeps failing

Similar Messages

Maybe you are looking for