Windows 7 64B update and iTunes clash

have tried several things in Device manager all USB devices look fine .. Win 7 64B sees the removable device correctly as an iPhone/ iPad but  the iTunes .. reinstalled now 3X along with all other Apple s/w  and i have followed all the iTunes troubleshooter advice.. it can not see or sync my IOS devices from within the new Itunes s/w .. am at a loss .. it was fine until I had trouble installing a W7 security update last week and had to "skip" two updates that would NOT install properly upon power down, they are now installed.. but at the same time this knocked out my iTunes sync.. MSE finds no issues.  What could be blocking the USB sync connection?  BTW it did re-sync one time when I went in with MSCONFIG and Hid all microsoft Services then removed all else that normally loads at startup except these MS ones, .. that time Itunes could then see the iPhone device and did back it up and updated it's iPhone IOS to the newest version but with app Sync errors / fail later.. and now iTunes no longer sees any of the IOS devices again.  Please help.. JimS

DBrooks wrote:
Well, I've had zero issues using Win7 RC, can't imagine something is broken with RTM.
hoping you are right, but have been in this business way to long to be anything but a firm believer in O'Toole's Law - which basicly states - Murphy was a Optimist.
Thanks will cross fingers

Similar Messages

  • I ran the new itunes 1.11 update and itunes is no longer found on my computer and it will not allow me to reinstall. What happened?

    I recently ran the itunes 11.1 update and itunes is now gone from my computer and will not allow it to be reinstalled. I am running Windows 7. Any ideas?

    Hello RDH54
    I would remove all components and Apple related software and then try the install again.
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I have done my updates and itunes is no longer recognizing my iphone as a device. My phone shows that it is plugged in but when I open itunes, my iphone doesn't come up as a device.

    I have done my updates and itunes is no longer recognizing my iphone as a device. My phone shows that it is plugged in but when I open itunes, my iphone doesn't come up as a device.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    -Griff W.

  • Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast: Exception Name: NSInvalidArgumentException Description: -[_NSConcreteUserNoti

    Since trying to update yesterday, my computer won't download any updates and itunes 11.1 says "Internal Error" and gives me the following info when I click on a song or podcast:
    Exception Name: NSInvalidArgumentException
    Description: -[_NSConcreteUserNotification activationType]: unrecognized selector sent to instance 0x25a06b0
    User Info: (null)
    0   CoreFoundation                      0x922216fb __raiseError + 219
    1   libobjc.A.dylib                     0x920108db objc_exception_throw + 230
    2   CoreFoundation                      0x9222563d -[NSObject(NSObject) doesNotRecognizeSelector:] + 253
    3   CoreFoundation                      0x9216af77 ___forwarding___ + 487
    4   CoreFoundation                      0x9216ad22 _CF_forwarding_prep_0 + 50
    5   iTunes                              0x00df38e2 iTunes + 14624994
    6   iTunes                              0x00df36ae iTunes + 14624430
    7   libobjc.A.dylib                     0x9201c6c5 -[NSObject performSelector:withObject:withObject:] + 77
    8   Foundation                          0x93c12d85 -[_NSConcreteUserNotificationCenter _sendDelegateMessage:sendToAppDelegate:withNotificationFromMessage:] + 335
    9   Foundation                          0x93c12eaf -[_NSConcreteUserNotificationCenter _notificationPresentedMessage:] + 58
    10  Foundation                          0x93c137c2 __block_global_1 + 156
    11  libdispatch.dylib                   0x9371b2cf _dispatch_call_block_and_release + 15
    12  libdispatch.dylib                   0x9371ea80 _dispatch_client_callout + 46
    13  libdispatch.dylib                   0x9371c8e8 _dispatch_main_queue_callback_4CF + 223
    14  CoreFoundation                      0x9211b255 __CFRunLoopRun + 1829
    15  CoreFoundation                      0x9211a7c4 CFRunLoopRunSpecific + 308
    16  CoreFoundation                      0x9211a67b CFRunLoopRunInMode + 123
    17  HIToolbox                           0x90b6fc76 RunCurrentEventLoopInMode + 242
    18  HIToolbox                           0x90b76eb9 ReceiveNextEventCommon + 374
    19  HIToolbox                           0x90b76d34 BlockUntilNextEventMatchingListInMode + 88
    20  AppKit                              0x97621923 _DPSNextEvent + 709
    21  AppKit                              0x97621167 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 119
    22  AppKit                              0x9761d78c -[NSApplication run] + 855
    23  iTunes                              0x0017a898 iTunes + 1546392
    24  iTunes                              0x0017a709 iTunes + 1545993
    25  ???                                 0x00000002 0x0 + 2

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Audiobook chapters, not work in iphone os7 update and itunes 11.1

    With the new update chapters is not working. Does anybody have a way to fix this! Iphone 5 with os7 update and Itunes 11.1

    I found this Apple users have to get an app to get back what we had in ios6. Get Mario Adrian's audiobook app. $4.99

  • Old critical problem is actual for Windows 8.1 Update and Windows 10 TP

    Hello,
    my app is in the Windows Store 2 years and all 2 years I am getting reviews with 1 stars with complaining about cache size, which can be 10-30Gb... I have reported about this problem to Microsoft Support at October 2013, but problem is not solved in Windows
    8.1 Update and it is amazing... I reproduced problem on Windows 10 TP. More details about problem in my old topic https://social.msdn.microsoft.com/Forums/ru-RU/0a5d2822-9a3f-48ef-a30e-e8826e76b5b5/critical-problem-still-exists?forum=winappswithcsharp
    Big files with size more than 5Mb are stored and are not deleted, so information in last message is not right.
    Is it so difficult problem to resolve? Please enable option for Windows store apps co they can delete their cache manually. If problem is not resolved in Windows 10 final release, I will write about it to all major IT magazines, because problem is very critical
    and AFFECT ALL APPS from Windows Store.
    sorry for my English, thank you.

    Hello,
    Keep in mind that the current cache size limit (W8.1) is 95% of free space or 4 GB whatever is smaller. 200 MB is not very large. Do you see the cache reach a size of greater than 4 GB?
    -James
    Windows SDK Technologies - Microsoft Developer Services - http://blogs.msdn.com/mediasdkstuff/
    yes, my users report about 10-30Gb size, also for my radio app I do not see any reasons to store radio stream cache even 100Mb, because it is absolutely unnecessary. I think 4 Gb for cache on Windows tablets with 32 Gb SSD is too big. Also users think
    what it is my trouble that app generates big .dat files, and they think I do not see their reviews and do not do anything to solve problem, it makes me very unhappy.

  • Trouble with 2006-06-28 Updater and iTunes

    Hello all,
    Okay so my problem deals more with the software for my iPod rather than the iPod itself. My iPod work wonderfully with no problems whatsoever. (Forget the fact this is my second one because the first one DIED sniff sniff) But here's the thing. I recently installed the latest update for iTunes on my Toshiba laptop and when I went to plug in my iPod it didn't recognize it. So I went to the Apple website and installed the latest updater for my 30GB iPod. But every time I try to update my iPod, I get the following error message: "iPod Service Error"
    I have done everything suggested on the iPod support site and I have uninstalled and reinstalled both iTunes and the iPod updater and still nothing seems to be working. I don't think anything is wrong with my iPod but I could be wrong. If anyone has had (or is currently having) this problem could you help me please!!!!!!!!!
    30GB IPOD   Windows XP  

    I am having a similar problem since the update, but with my iBook and OS X. My iPod isn't showing up in iTunes or OS X.
    I have tried to restore the iPod, but it doesn't appear in OS X, so I don't know how I can otherwise do so.

  • IPod mini shows up as having 328.9 GB capacity in updater and iTunes

    I have a 6 GB mini, and I have updated to the new iTunes since I last used it. So when I connnected it, it showed up as "Data" instead of my iPod name, and iTunes claimed it didn't have any songs on it even though it did. I got the 1.4.1 updater (2006-01-10) and it said it needed update but it only offered a restore option. I went ahead and restored, but when it came back it still said 328.9 GB, both in the updater and in iTunes. So I formated from the control panel, and it correctly read 5.67 GB free. Back to updater, it still reads 328.9. It seems to work, but it worries me that the disk size reads wrong. It claims in iTunes to have used 89.6 GB with 2hundred whatever free. No, I'm not looking at my hard drive, this is the iPod.

    Never mind, mystery solved. I had a windows network drive assigned as drive J:, which is the drive my iPod decided to be. So the two conflicted, and iTunes was writing to the network drive.

  • Why am I getting a message that I need to log into the Canadian store for app updates and iTunes

    Why am I getting a message that I need to log into the Canadian store for app updates and I tune purchases?

    Should you be in the Canadian App Store? Is that your store? Of not - or of you need to see what store you are in.
    Settings>iTunes and App Stores>Apple ID
    Tap your ID
    Tap View Apple ID
    Enter your password
    Go to country/region in the popup window to change the store

  • Installed 10.4 update and itunes will not open

    Installed itunes10.4 32 bit version - after successful installation itunes will not open
    any advise?

    Update to my last post.  I have finally "fixed" whatever problem was causing the Apple software products to malfunction on my PC, Windows Vista 32 Bit SP2.  After updating to iTunes 10.4 and Safari 5.1, a series of error messages would appear:1) AppleSyncNotifier.exe 2) iTuneshelper.exe 3) iTunes Failed to properly install - Error 7 (Windows error 126).  I had tried uninstalling and reinstalling iTunes & Safari as well as downdating iTunes to an earlier version, but this had all failed to correct the problem and the error messages still appeared when the programs were suppose to have been removed. 
    I ended up using the Windows Program Manager (in Control Panel) to remove every single Apple product from my PC, including the Apple Installer.  Then I restarted the system.  Taking bits and pieces of advice from this forum, I started the system, went to the Apple website, downloaded and SAVED the newest iTunes version (which includes QuickTime), but did not run the program.  Then I disconnected from the net, turned off all virus and firewall protections, and finally installed the saved iTunes program.  It took an extraordinarily long time to complete the install, but I was able to restore my libraries from my iPod Touch (4th gen) by performing a simple sync.  I reconnected to the net and updated the device software . . . so far, so good [knock on wood], no error messages yet.  I will add each of the removed programs as they are needed in the future so that whatever conflict exists can be fixed - until then, I'm at least happy to have iTunes back!  Hope this is helpful to someone and saves them the 4 hours it took me to get back on track

  • Slower MBP since 10.5.4 Most Recent Security Update and iTunes 7.7.1(1)

    Anyone notice a significant overall slowdown since installing updates to iTunes and the Security Updates that were released recently? My MBP is an Intel Core 2 Duo 2.3GHz with 4GB of memory; it should blaze, and used to, but not anymore. Very noticeable slowdown overall!

    After update 10.5.2 there has been performance issues on my MBP as well.
    Response performance varies - like your laptop is becoming tired..................
    Unfortunately, general freezing of the screen and all control (except power down), happens randomly - I read in another post that this only happens on Battery? - I believe this to be true...........
    Longer app loading times and annoyances from spotlight indexing at poor times.
    Window memory and size are lost on occasion - having to resize all quite often - crazy.
    Dock unhide judder from first mouse activation - I know it's petty, but I think the Dock is worth it.
    Sometimes, bootcamp partition desktop icon fails to appear with the other desktop icons, later after spotlight has calmed down.
    The last bug is usually a sign to run Onyx maintenance and rebuild spotlight and other preferences.
    Great program.
    This usually sorts it out for a week and then the symptoms come back.
    Logic Pro seems to take more RAM (I know i need to upgrade - only 3Gb available on my machine - nuts.)
    Still a very cool machine though - BF2 and Logic on one laptop.............
    Any positive ideas and solutions are welcome.

  • Safari (updates and itunes store) can't connect

    When using Safari on my home network I cannot connect to any website. I will get messages such as "Safari can’t open the page “http://www.apple.com/” because Safari can’t connect to the web proxy server (HTTP). To change your proxy settings, open Safari Preferences, click Advanced, and then click Change Settings. For help with this problem, contact your system administrator." I am the network administrator. Also itunes store, and software updates will not connect. Entourage and mail receive mail but with question marks instead of images. Firefox has no problems, and when running network assistants diagnosis all seems OK - all green lights.
    My son's identical MacBook (with seemingly identical network airport settings, but running 10.5) will connect to the iTunes store and also to websites using Safari, as will both of our ipod touches. My MacBook will actually connect to the iTunes store using my same network when running WinXP using vmWare fusion.
    I have tried to change Safari's proxy setting through its preferences, but the Proxies>change settings button is ghosted - so I have accessed the network settings for my home location to ensure that no proxy checkboxes are checked. (I have tried automatically detect proxy settings, but still no go). I have created new network locations and tried many combinations of settings (network assistant's diagnosis is always all green lights, whenever I have used it.)
    I have also emptied the system configuration folder from preferences (along with com.apple.internetconfig.plist, com.apple.internetconfigpriv.plist, com.apple.internetconnect.plist) and rebooted with no joy.
    I have ensured that I have the current versions of Safari and iTunes installed and am at a loss. I don't know when this first happened, and can't think of a change that I have made that would have precipitated this. Safari does function at work on the work's network, and images do come through to my mail at work. I am assuming that I have a setting at home that is blocking. (I have turned my firewalls off and on to check, but again no success.)
    I am about to buy an iPhone and am waiting til I can sort this issue. Any suggestion would be appreciated.
    Thanks,
    Richard.

    HI,
    From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
    From the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
    If you have Safari 3rd party plugins, they may not be compatible with 10.6. Go here for trouble shooting.
    If you use GlimmerBlocker by chance, that could be the culprit. Check out this thread.
    http://discussions.apple.com/thread.jspa?messageID=10589731
    http://support.apple.com/kb/TS1594
    Same with any Input Managers. Move any files in the /Library/InputManagers folder to the Trash
    If you are running Safari in 64 bit mode, try running in 32-bit mode instead. Right or control click the Safari icon in the Applications folder, then click: Get Info In the Get Info window click the black disclosure triangle next to General so it faces down. Select 32 bit mode. Also, (in that same window) make sure Safari is NOT running in Rosetta.
    Go to ~/Library/Cookies and move the Cookies.plist file to the Trash.
    Try Open DNS - Free / Basic
    If Safari still can't open web pages, go to the Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop. Relaunch Safari. If Safari loads web pages then that .plist file needs to be moved to the Trash.
    Carolyn

  • TS1490 i am running Windows Home Server 2011 and iTunes can't seem to connect to the iTunes Store nor run Genius on my Library.  What do I need to do?

    I am running Windows Home Server 2011 and have installed iTunes on my dedicated server, attached to my router.  I can't connect to the iTunes Store nor run Genius on the server ONLY (iTunes runs fine on by two other PCs and my Apple TV and I share the libary that resides on the server).  I am running a very current version of iTunes 64 bit.  I have run the connectivity test and it failed. 
    My guess is that there is some setting in the Server software that i need to change to let iTunes access urls or computers on the internet.  Does anyone have any experience with this software combination?
    Thank you

    Some guy managed to get this to work. The following link is for iTunes 10.5 but it should work for the current release.
    http://social.microsoft.com/Forums/en-US/whs2011/thread/bd62ee3d-a933-4cad-ae9b- fd38adc994c0
    Good luck!

  • Windows 8.1 Update and Verizon

    How long does Microsoft expect us to wait for the update to arrive on the the phones.  It will almost at this point and be a 1/2 a year since the update has been released and yet no update.  how does Microsoft expect to keep up with Apple or Android if their updates are half a year behind.  And besides that point no new Lumia phone this year I feel like microsoft has given up on the mobile market and i should swithc over to android or apple.

    Totally agree with you but pushing the update depends on Verizon's decision.
    Which is told unofficially is that some Verizon apps don't work correctly with WP8.1.
    IMO that should be a problem of Verizon not Microsoft. Verizon should ask their app coders to change/update their apps and not Microsoft to perform some corrections to WP8.1 OS.
    People have discussed about all kinds of conspiracy theories. Here's some of them:
    1) Lumia Icon was discontinued because of WP8.1 update issues. If Verizon is not happy with the update and won't release it, they can always claim that they've already retired Lumia Icon. And Lumia 928 is so "old" that they won't provide the update for it anymore,
    2) Lumia Icon was discontinued because of the introduction of Lumia 930. It can be purchased by anyone and has more (LTE) frequencies to use it on all carriers' networks,
    3) Verizon will earn only small amount of money while dealing with Windows Phones. Android phones and iPhones will make the most of their incomes comparing to Windows Phones. So why waste your bullets on something which is not so profitable.
    Well, personally speaking I don't know what is the main reason but maybe it's the combination of all those described above.

  • Windows 8.1 update and brightness control

    I have a DELL XPS L521X with Windows 8.1 (I had windows 8 some days ago) and I have had two problems:
    1) I did not allow Windows to upgrade to 8.1 and it forced me to do it. It gave me 15 minutes to save progress and do it. I was watching the NBA finals on my computer and it was the only thing I had to watch the game. The installation lasted the whole second
    half the game and I WAS NOT ABLE TO WATCH IT DUE TO THIS, YOU CAN IMAGINE HOW I AM FEELING ABOUT NOT USING WINDOWS EVER AGAIN... How can I prevent it from ever upgrading anything without my consent? I had already turned off updates from Control Panel\System
    and Security\Windows Update but it didn't help.
    2) My brightness control became broken after the 8.1 update. I had to manually pick the older Intel HD 4000 driver to have it working again or else my eyes would stop functioning after such a bright display. I had to switch to the 9.17 driver version from
    September 2012. Where can I get the lastest WORKING version of the driver?
    Please stop making me loose days fixing Windows issues... 

    Hi,
    We have set the GP to disable Windows 8.1 update in Windows store, you can check it here:
    How to Disable “Update to Windows 8.1 for Free” Notification in Windows 8 Store?
    http://www.askvg.com/how-to-disable-update-to-windows-8-1-for-free-notification-in-windows-8-store/
    For your second issue, it's not only related to Windows, but also the driver provider. Microsoft is working together with the device manufacturers and partners to deliver update package and try the best to solve the compatible issue and bring a great improvement
    on user experience. But you know, it will take some time.
    Thanks for your understanding.
    Kate Li
    TechNet Community Support

Maybe you are looking for

  • How to apply multiple actions on a single file in one go to generate multiple watermarked pdfs?

    usually i need to create many watermarked datasheets for different customers using a single base pdf. currently i run individual actions for individual customers on the same file which means i have to runs 10s of individual actions every time i have 

  • MSA Conntrans fails after machine name change

    Hi I have 5 remote laptops that have had their name changed and conntrans will no longer work. When I ran  SELECT @@SERVERNAME  on database it retunred old name so I then ran  sp_dropserver  'oldname' sp_addserver 'newname' , local Stop / start SQL s

  • Printing Report Output

    Hi Tech Gurus, Its urgent requirement,assume that you are a end user submitting a request,once it is completed normally the output comes as a hardcopy through a printer.is it possible to configure like this.thanks in advance for ur clarification. Reg

  • Java install kit for mac built under windows

    Hello, sorry if I posted this thread in a wrong section but i didn't know where else. I have developed an application in java and made a installer for windows platform. Now I am asked to build a installer for mac OS X. The big problem is I have no id

  • Openbox: keycodes and keybindings

    I've got a six year old very basic Logitech wireless keyboard with 8 hotkeys (inc volume). I've found the keycodes using showkey, but I can't get them to do anything. I'm trying to get keycode 172 (hexadecimal AC) to start Firefox, and keycode 156 (h