Windows 7 boot camp
Hello. I got little problem today with bootcamp.
Few days ago I updated yousemite and bootcamp worked fine after that. Today I used yosemite and remember my partion in bootcamp is getting small and I wanted to give more space for windows. Sure I wasn`t able to just drag more space for bootcamp so I thought it could be ok to do new partion in machintosh disk in windows format as well and I made 3rd disk there as planning to be able to use that disk in windows. After that I continued my suff with os x and later tried to start windows via boot camp as I always do. Mac started reboot and suddenly black screen came and top left there was blinking line ( - ) and nothing happened after 10min.
So I just shut down my mac by pressing the on/off button and started it as os x after that. Went to disk ultility and removed that extra partion what I did earlier and tried to start windows again and same thing happened. When I`m booting my mac and pressing alt while that I`m not able to choose boot camp. I can just choose os x or recovery 10...
I also ran os x repair stuff and tried again but didn`t work. In general I think everything should be like before I did any new partion. But simply cannot choose bootcamp but I`m able to see bootcamp in disk ultility and I can choose restart mac using boot camp when using os x.
Sure I don`t have any back ups, so it`s kind a ankward. Hope I can start use windows/bootcamp without reinstall it.
So in the nutshell when I trying to boot windows when using os x I can choose start as a windows using bootcamp and after that it starts booting. After that black screen appear and I can see only white line in top left in the screen. Nothing really going to happen after that.
And when I`m booting and pressing alt I`m not able to choose bootcamp, just os x or recovery.
here.
ville:~ villehietalahti$ sudo fdisk /dev/disk0
Password:
Disk: /dev/disk0 geometry: 30401/255/63 [488397168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 425910456] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 426320096 - 1269536] Darwin Boot
4: 0C 1023 254 63 - 1023 254 63 [ 427589632 - 60807168] Win95 FAT32L
ville:~ villehietalahti$ sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 80 7c 19 |........?.....|.|
00000020 00 00 00 00 80 00 80 00 ff d7 9f 03 00 00 00 00 |................|
00000030 00 00 0c 00 00 00 00 00 02 00 00 00 00 00 00 00 |................|
00000040 f6 00 00 00 01 00 00 00 e4 f1 41 28 34 42 28 f8 |..........A(4B(.|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb 68 c0 07 |.....3.....|.h..|
00000060 1f 1e 68 66 00 cb 88 16 0e 00 66 81 3e 03 00 4e |..hf......f.>..N|
00000070 54 46 53 75 15 b4 41 bb aa 55 cd 13 72 0c 81 fb |TFSu..A..U..r...|
00000080 55 aa 75 06 f7 c1 01 00 75 03 e9 dd 00 1e 83 ec |U.u.....u.......|
00000090 18 68 1a 00 b4 48 8a 16 0e 00 8b f4 16 1f cd 13 |.h...H..........|
000000a0 9f 83 c4 18 9e 58 1f 72 e1 3b 06 0b 00 75 db a3 |.....X.r.;...u..|
000000b0 0f 00 c1 2e 0f 00 04 1e 5a 33 db b9 00 20 2b c8 |........Z3... +.|
000000c0 66 ff 06 11 00 03 16 0f 00 8e c2 ff 06 16 00 e8 |f...............|
000000d0 4b 00 2b c8 77 ef b8 00 bb cd 1a 66 23 c0 75 2d |K.+.w......f#.u-|
000000e0 66 81 fb 54 43 50 41 75 24 81 f9 02 01 72 1e 16 |f..TCPAu$....r..|
000000f0 68 07 bb 16 68 70 0e 16 68 09 00 66 53 66 53 66 |h...hp..h..fSfSf|
00000100 55 16 16 16 68 b8 01 66 61 0e 07 cd 1a 33 c0 bf |U...h..fa....3..|
00000110 28 10 b9 d8 0f fc f3 aa e9 5f 01 90 90 66 60 1e |(........_...f`.|
00000120 06 66 a1 11 00 66 03 06 1c 00 1e 66 68 00 00 00 |.f...f.....fh...|
00000130 00 66 50 06 53 68 01 00 68 10 00 b4 42 8a 16 0e |.fP.Sh..h...B...|
00000140 00 16 1f 8b f4 cd 13 66 59 5b 5a 66 59 66 59 1f |.......fY[ZfYfY.|
00000150 0f 82 16 00 66 ff 06 11 00 03 16 0f 00 8e c2 ff |....f...........|
00000160 0e 16 00 75 bc 07 1f 66 61 c3 a0 f8 01 e8 09 00 |...u...fa.......|
00000170 a0 fb 01 e8 03 00 f4 eb fd b4 01 8b f0 ac 3c 00 |..............<.|
00000180 74 09 b4 0e bb 07 00 cd 10 eb f2 c3 0d 0a 41 20 |t.............A |
00000190 64 69 73 6b 20 72 65 61 64 20 65 72 72 6f 72 20 |disk read error |
000001a0 6f 63 63 75 72 72 65 64 00 0d 0a 42 4f 4f 54 4d |occurred...BOOTM|
000001b0 47 52 20 69 73 20 6d 69 73 73 69 6e 67 00 0d 0a |GR is missing...|
000001c0 42 4f 4f 54 4d 47 52 20 69 73 20 63 6f 6d 70 72 |BOOTMGR is compr|
000001d0 65 73 73 65 64 00 0d 0a 50 72 65 73 73 20 43 74 |essed...Press Ct|
000001e0 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f 20 72 65 |rl+Alt+Del to re|
000001f0 73 74 61 72 74 0d 0a 00 8c a9 be d6 00 00 55 aa |start.........U.|
00000200
Similar Messages
-
After i install window 8.1, i can't see window icon in my start up disk, i see only mac icon 10.10, but i can see both mac and win icon in my window boot camp control. i want to see window icon in my mac Yosemite 10.10.2,system preference, start up disk.
Third-party NTFS software interferes with the Apple NTFS drivers, which control whether you can see the Bootcamp partition in the Startup Disk option. As a test, can you uninstall all third-party NTFS software and check System Preferences -> Startup Disk?
-
How do I restore data to a new mac with windows boot camp partition?
Hi
I have a new iMac and an old MBP, I'd like to copy all of the data of my old MBP to the iMac.Would doing that affect the windows boot camp partition?
and how do I do it?
right now im backing everything up on my MBP using super duper
both the MBP and the iMac are running on LionI am assuming the Boot Camp partition is on the old MBP and that the SuperDuper clone is on an external drive and is bootable. The Super Duper clone does not include the Boot Camp Partition.
To get the Mac Data moved you can use Migration Assistant and if you want to transfer the Boot Camp partition you would need Winclone to move/copy it to a newly created Boot Camp partition on the iMac. The SD Clone ( and a Winclone backup) is your insurance policy if some kind of difficulty arises.
Links to more detailed info.
http://support.apple.com/kb/HT6025
http://support.apple.com/kb/PH11275
http://pondini.org/OSX/MigrateLion.html
http://twocanoes.com/support/winclone/migrating-a-bootcamp-partition-with-winclo ne
http://twocanoes.com/support/winclone/using-sysprep-when-migrating-boot-camp -
Could I reinstall OS X partition keeping the windows boot camp partition?
II have a OS x partition that need reinstall. In the same hd I have a Windows Boot camp partition. The question is, could I reinstall OS X partition without affect the Windows partition?
Thanks,
Jorge.Sometimes it works, sometimes not.
Of course you should backup both.
Q: why do you think OS X needs to be reinstalled or something?
Disk directory trouble?
Because 3rd party disk utility can do better, as well as maybe clone Mac volume so you can boot and do more repairs.
Or maybe the partition table is shot. Or bad sectors. And bad sectors can require a full format.
In a perfect world, but disk drives and systems aren't -
If I get windows boot camp will I be able to play Tomb raider and Sims 3
I an getting a new laptop for school but I also what to play games like that new Lara Croft and the sims 3. I have heard about windows boot camp.
I think I want this retina model
5-inch: 2.3GHz
with Retina display
2.3GHz quad-core Intel Core i7
Turbo Boost up to 3.3GHz
8GB 1600MHz memory
256GB flash storage1
Intel HD Graphics 4000
NVIDIA GeForce GT 650M with 1GB of GDDR5 memory
Built-in battery (7 hoursWindows Boot Camp does not exist, you mean Boot Camp Assistant, which is a Mac program, it is the program you would use to prepare your Mac to run Windows.
You will need a 64bit retail or OEM version of Windows Home or Professional.
You will also need to read the Boot Camp Documentation thoroughly, and make a complete backup of your machine before repartitioning. -
Will genius bar install windows (boot camp) for me?
will genius bar install windows (boot camp) for me? if so, costs?
Ask them. We don't know what your local Apple Store will do for you. It will certainly cost you their hourly charge for however many hours are involved. You may have to purchase Win8 from them but if not you must have a copy of your own.
Or you can take the time to read the Boot Camp documentation and do it yourself. Start here: Apple - Support - Boot Camp. Open Boot Camp Assistant then click on the large button on the left to print the documentation. Then read it very carefully. -
I have a brand new imac 5k, with 4ghz i7, 295x GPU, 3.1TB fusion drive. Bought the machine so I could dual boot - I need windows for VR Dev work.
I've spent the last week and a half on tech support calls with Apple Senior Tech agents, and Microsoft agents as well, and today have been told that indeed this machine cannot run windows 8.1. Apparently Apple engineering knows about the issue, but says the problem is microsoft's. Ugh.
The latest iteration of the issue comes when installing 8.1 onto an external thunderbolt SSD (without even using boot camp) - I go through the EFI installer, convert the drive to GPT, format it as ntfs, but when I select the partition to install onto, the installer says it can't find the partition it just created. Smuh?
I've also tried the install through boot camp. This installation actually worked twice, but the install was unstable. After booting back into osX, then returning to Windows, the windows install went corrupt and couldn't be repaired. Subsequent attempts to install windows yielded a flurry of different errors, including "windows doesn't support GPT in this mode" or "the disk is locked, please unlock the disk" or "MBR must be converted to GPT" (where once I converted to GPT, the drive could no longer be found, despite the operation completing successfully.)
At any rate, it's a huge mess. I'd happily return the machine for a different config, but the company I bought it from will only swap it for a similar model -- so I've spent a pile on a machine that does not function as advertised; apple says "too bad, talk to Microsoft." Microsoft says "too bad, we've never seen this, this is an apple issue."
Has anyone out there gotten windows up and running on an iMac5k with fusion drive? If so, did you have to go through a crazy maze to make it work?
Any help is appreciated.
Thanks,
MCMichael Conelly wrote:
After much gnashing of teeth, and a half dozen support calls, I'd all but given up. I finally seem to have solved this though - sort of - by installing windows 8.1 on boot camp on an older iMac, then cloning the bootcamp disk to an external thunderbolt drive via Winclone. That worked seamlessly, sticking to winclone's instructions, and I can boot via EFI to Windows 8.1 on the new iMac. So far so good.
I usually install W8.1 via EFI by using DU and a Free Space partition. The 3TB Fusion is first split into the underlying SSD/HDD physicals. OSX and Windows OSes are installed on SSD via EFI (no BCA). The OSX part and half the HDD are then used to create a new CS volume. The other HDD half becomes NTFS for non-Windows OS files. The Hybrid MBR method is completely unsatisfactory with the 3TB Fusion drive.
How is the TB/Winclone image for performance of the OS (since pagefile.sys is also on the TB)? -
M-Audio ProFire audio interfaice not seen by Windows/Boot Camp
It seems Windows XP SP2 under Boot Camp, running on a Mac Pro dual-quad Nahalem 2.66 has a problem with connecting to Firewire devices. It won't even boot up with Firewire 800 drives connected, and I understand from reading posts in other threads that this is a common problem.
The problem I'm looking to get resolved has to do with my M-Audio ProFire FW 400 interface. Windows will boot up in Boot Camp with the ProFire connected and powered on, and I have installed the latest driver from M-Audio. But when I launch the ProFire control panel, it reports that it cannot find a ProFire connected. I use the ProFire in the Mac OS side in Logic and ProTools, so the unit and connection are fine. I will also be contacting M-Audio to see if they know of this issue.
TIA for any help.
- Paulhey i don't know if this helps but i have M-audio Firewire Audiophile...it seems that when you boot windows, if m-audio is "ON" it searches for the pc Bios... but maybe it's not possible on a mac...
first time i rebooted bootcamp i noticed that i could see the levels volume on the m-audio control panel but i didn't hear any audio from speakers....
so what i did???
now every time i boot windows, m-audio first is OFF...then after completely booted, i turn it on...autosearching for its drivers,wait for 2 beeps from the speakers...then
AUDIO IS ALWAYS ON AFTER MANY HOURS... :-)TESTED [OK]
but i hope they solve this problem soon... -
Weird DVD drive issue on Windows Boot Camp on Macbook Pro
Hi, I just installed Windows on my Macbook Pro with Boot Camp. Windows itself works fine, then I tried installing Fallout 3. The installation took a really long time, which I thought was weird. I tried to play the game but it timed out in trying to read the disc. To further test this, I threw in a movie DVD and tried to play it. Windows Media Player said I didn't have a compatible DVD decoder. I tried playing the dvd in Mac OS and it works fine. I've also run the Leopard DVD install for Boot Camp fine. I used the Windows XP video decoder and it has determined that I don't have an MPEG-2 decoder installed. What I'm confused about is that if I manage to get a hold of a decoder, will that affect other processes, such as reading the DVD for video games?
Hi and welcome to Discussions,
by design courtesy of Microsoft the Media Player is not capable of playing DVDs unless an appropriate DVD-Decoder is installed.
You can use an alternative media player like VLC http://www.videolan.org/vlc
But this should not affect the usage of Windows Games, since usually a Games manufacturer puts all needed software to run his games onto the games CD/DVD, so it has to be something else preventing Fallout 3 from running.
Time-outs when trying to read/check the disc can be sometimes caused by 'dirt' on the disc (fingerprints, scratches, etc.).
Check for that.
Also make sure to have not installed programs for 'Virtual-Disc-Drives' like Daemon-Tools and/or Disc-Burning software like Nero, since these can also hinder the game from running.
Hope it helps
Stefan -
How do I remove the old windows boot camp partition which is now useless on my new Macbook pro
I had boot camped windows Vista to my old Macbook Pro 2009.
When I bought a new Macbook Pro Retina Late 2013, I restored from my Time Machine backup. It never put Windows Vista on as there was compatability issues.
I recently tried to partition in Boot Camp to install Windows 8 so that I can use a particular program for work. The "ghost" partition is still there and I can't see an option to make the HD as one again. Boot Camp wants me to format the HD as single and journaled which I understand but if I restore from my backup it puts the "ghost" partition back in. 6 hours of waiting to find that out!
Any ideas?
ThanksThanks for responding.
Boot Camp shows my HD as a rectangle when I go to the "partition" tab but nearly half of it is white. Is this the free space?
The error message I got was:-
The disk cannot be partitioned because some of the files could not be moved.
Back up the disk and use Disk Utility to format it as a single Mac OS extended (journaled) volume. Restore your information to the disk and try using Boot Camp assistant again.
I was only making a small partition, so it couldn't have been too big.
There is no evidence of any Windows installation or a physical partition but it must be there to get that message. Is that correct?
I can't see an option to format my whole HD but even if there was, the problem would reappear when restored from TMachine.
UPDATE:
just tried to make the white area on my HD into a new partition and then erase it.
I'm trying Boot Camp again to see if that has worked. It just takes about 2 hours to get to the problem stage again!! -
Windows/Boot Camp printer sharing with OS X
I have three Macs on a wireless network - 2 MacBooks and a MacMini. The MacMini and one of the Macbooks runs Win XP under Boot Camp. The MacMini has a USP printer attached.
I can print to this printer from both of the WinXP/BC machines and the OS X MacBook can 'see' the MacMini WinXP/BC environment and picks up the printer for setting up in printer preferences. However, the OS X MacBook cannot print to the printer. The printer is marked to be shared in the MacMini and is accessible from the WinXP/BC MacBook. The correct driver has been loaded into the printer panel on the OS X machine.
When the print command is given from the OS X machine, the printer panel shows: "Attempting to connect to host (MacMini) for printer. Connecting..." and then hangs on that.
This is a solid problem. Any ideas would be most welcomed.There are links on this FAQ site to printer sharing under Windows etc
http://tech.ifelix.net/ -
Connecting MacBook through external display in Windows Boot Camp partition
Hello everyone! I recently installed Windows Vista Home Premium on my MacBook 320GB. My Mac Partition of the drive works perfect, and connects through Mini DVI-Video through composite cables and into my T.V. When I tried this in Windows, I had no luck whatsoever. yes, all the drivers are installed for my chipset, processor, keyboard, etc. Windows is updated as well through Microsoft, But not through the Apple Software Update because the download failed again to the Boot Camp update. How do I connect an external display(ex. Projector, T.V., anything that has composite input)? Yes, I know some of you will say, "Your first mistake was buying Vista", but thats not the problem here. Windows Vista works perfectly. When you connect an external display, it re-adjusts its screen resolution but does not appear on the external monitor. Is the Boot Camp Update the solution? Please Help!!!
That was a lot of writing!
-ChristianI am using Vista on Macbook and when I connect my PC to my TV, lot of times, it hangs on me and a blue screen shows up with some errors and then it shut downs. I atleast do this 2-3 times and then finally it gets connected but there has to be a way where we can easily connect to TV without any issues. Any help guys?
Also I have noticed, my resolution on TV when I connect my macbook is 1900 x 1260 something... Is this related to resolutions? -
Can't play Song After Windows(Boot Camp) installation
Hi
Itune stoped playing many mp3 song .
I installed windows with boot camp and played some songs in windows media player ,
right after I finshed the installation , I tried to play some songs in Itunes, but Itunes won't even recognize them ,
He just skip them , he also removed the artwork icon form them.
those several songs can play with quicklook with no problem .
thanks
GideonI have no idea why it didn't work last night but I tried your method again and it worked great! Thank you, saved me the time of going to the apple store
-
Remove windows boot camp applications
Hi there!
It might be a common question but this is the situation:
I've been using Windows for a few weeks for school. I had it installed on a partition and I used Parallels. A few weeks ago, I have restored my disk to only one, so i removed Windows. Afterwards I had Parallels uninstalled but I keep getting "My boot camp applications" in my user folder, and they also show up in Launchpad. Quite annoying!
Can I just select all the applications and remove them, or select the "My boot camp applications" folder and remove it?
Thanks!Yes, removing that folder should do the trick.
The correct sequence would have been:
1. remove the Windows VM from within Parallels
2. remove Parallelsl using the Parallels Uninstaller.app
3. use the BootCamp Assistant to remove the BootCamp Windows partition
Stefan -
I have a printer installed on my network attached directly to Time capsule. All my Macs in OSX print fine. However, I cannot get my Windows XP Boot Camp to find the printer. Any suggestions. Thanks.
Download and install Bonjour for Windows and that will solve your problem.
Read this thread;
http://discussions.apple.com/thread.jspa?threadID=1440665&tstart=30
Good Luck! -
Windows Boot camp drivers won't install
So I'm trying to put windows on my mac again, for the fifth time since windows won't let me activate it anymore. Everything goes fine and it installs and I put the Mac os x install disc 1 in to install the drivers. It loads up and goes through the process of installing the drivers. Once its down it asks me to restart the computer which I do. Once I get in however, none of the drivers are installed like nothing ever happened. I can tell because I can't get internet and the trackpad won't work properly. The boot camp faq shows up and another window to update something shows up but it need the internet to work. I go and try to repair the drivers and it runs its course, restarts and still nothing! No drivers. I've tried deleting the drivers and reinstalling them, removing the partition and reinstalling but nothing is working. I've gotten the drivers just fine before but now they just won't install. I've updated my mac from 10.6.4 to 10.6.7 so can that be the problem? Its the only thing I did different.
I'm at my office at the moment and I don't have the disc to view. Tell me, have you found the drivers folder? You can select any driver and it should automatically open boot camp and install all "Apple Drivers" while in windows mode. Then after installing bootcamp, you can install Apple updater. I'm adding more than I should because I don't know how far along you are- if you look around the clock area in windows, you should see a boot camp icon; is it there?
Send me a screen shot with your disc open and I can maybe help you from there. [email protected] Otherwise, I will look at the direct path this evening and post the info here.
Maybe you are looking for
-
[URGENT] The remote server returned an error: (503) Server Unavailable
Hi All, Im using vb.net to write a web services. After couple of days the stress test on all the function, my exception catch sometimes is return the error message as a title but sometimes is not, why is this problems? Please advice. Below is the cod
-
Scanner not working HP Photosmart C4780
I have OS X 10.9.5 and a HP Photosmart C4780 printer. I'm trying to scan something to a pdf and I'm getting a black image. When I scan an 8.5 x 11 size document as an image it only scans 1/4 of the document. Please let me know if there is a driver
-
When opening an attachment from my suddenlink email, the attachment opens in html.pdf. When I use my gmail account, the attachment opens fine. Any ideas. Thanks.
-
Need updated drivers for OJ Pro 8600 Plus Win 8.1 64 bit
My 8600 constantly loses it's connection to network and needs to be shut off and restarted to correct. I noticed my drivers are out of date, but when I try to download updated drivers, I am prompted for a password. My Forum password doesn't work, o
-
Oracle apps technical consultant v/s oracle apps dba
hi, i am a oracle dba having 1.5 years of experience i want to jump into oracle apps so which profile will be good for me oracle apps technical consultant or oracle apps dba profile plz let me know i am very confused,i can't decide on this one plz he