Windows 7 PC + Airport Xtreme unable to connect to internet

Hi all, here's my frustrating situation:
1. I currently have 3 computers at home: a Win7 32bit PC, a WinVista 32bit PC, and a 13" Macbook Pro. I was previously using a DLink DIR655 router, and the 2 windows PCs were connected by wired ethernet, and the Macbook Pro was connected wirelessly.
2. I bought the Airport Xtreme router today, and installed the Airport Utility on my Win7 PC. I unplugged the DIR655, and plugged in the Airport Xtreme.
3. I ran the Airport Utility setup, and everything configured nicely. But for some reason, the Win 7 PC ended up connected to a "Unidentified Network" which was a "public network", and could not connect to the internet.
4. I turned on my Win Vista PC, and it immediately detected a new network, called it "Network 3" (set as a "home network", and I had no problems accessing the internet. Similarly, I turned on the macbook pro, and I connected via the Airport Xtreme wirelessly with no problems.
5. I tried switching the ethernet cables between the 2 PCs to no avail. I tried System Restore on the Win 7 PC but that didn't help either.
I was wondering if anyone had any ideas on what could be wrong with the Win7 PC. I'm out of my wits!

Hello geekgeek. Welcome to the Apple Discussions!
2. I bought the Airport Xtreme router today, and installed the Airport Utility on my Win7 PC. I unplugged the DIR655, and plugged in the Airport Xtreme.
Did you perform a complete power recycle of your networking equipment or just swapped routers? If you just swapped routers, then I would strongly suggest that you do a power recycle, as follows:
o Power-down the modem, 802.11n AirPort Extreme Base Station (AEBSn), and computers; wait at least 10-15 minutes.
o Power-up the modem; wait at least 10-15 minutes.
o Power-up the AEBSn; wait at least 5-10 minutes.
o Power-up the computers.
All computers, connected by wire or wireless, should now have Internet access through the AEBSn. Please post back your results.

Similar Messages

Airport Extreme with Airport Express--unable to connect to internet

I am using an Airport Extreme and 4 Airport Expresses to extend the range of the Extreme which is connected to my modem. As long as I am in the immediate area of the extreme the internet connection works perfectly. When I move to another part of the house, ie upstairs the internet does
not work. Diagnostics tells me that the ISP has failed and the internet and server lights are amber.
I have a green light on all the airports and a strong signal strength on my computer. Sometimes
diagnostics tells me that my airport does not have an IP address. I have the Airport Extreme and
two Airport Expresses downstairs and two Airport Expresses upstairs. HELP!

+however I did not use the ethernet cable. Would you please explain why this+
+works as I am using a laptop to connect wirelessly+
I'm guessing here that you are talking about using an ethernet cable to connect the Express directly with the computer to help with configuration.
When you do this, AirPort Utility and the Express are on the same network, so they communicate together. It seems that a lot of users have trouble trying to configure the Express using wireless...probably because it is sometimes necessary to "switch" networks to find the Express. I think the ethernet method is much easier and there's just less to go wrong. But...other users swear by the wireless configuration method, so I guess the bottom line is whatever works best is best.

Unable to connect to internet or print wirelessly on Boot Camp with Windows 7

I recently installed Boot Camp and Windows 7 on my Mac Book Pro with no problems.
A month later, I am unable to connect to internet or print wirelessly.
It states that I am connected to my router.
When I trouble shoot, it cannot find the problem.
My wireless connection and cable connection are fine on the MAC side.
Please help.

looks a like a Windows 7 problem. I assume that you can click on the current connection info on the task bar and see a connection to your wireless router? Have you updated your copy of Windows since it was working? I am wondering if it's an update that's applied in Windows which has done something.

Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issue

I have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

TouchSmart 600 unable to connect to Internet & email accounts. Error Code 0x80070057

TouchSmart 600 unable to connect to Internet & email accounts. Receive Windows Network Diagnostics error message "An unexpected error has occurred. The troubleshooting wizard can't continue" Error Code: 0x80070057. Using old laptop to send this message. Tried to restore back to a certain date but was only able to restore back to latest Windows download which did not correct my problem. Any help appreciated. Thanks.

I have the same problem connecting to the Internet that it is. It is more intermittent than permanent though. I have updated the driver from HP site, but no change. From the searches on the web problem seems more widespread though. HP do something! Please!

Unable to connect to internet via the proxy - Proxy set up OEM 12c

Windows server 2008 64 bit
OEM 12.1
I have to get agent software for Windows server 2003, and as far as I know the only way is through self update in OEM, is this the only way?
But when I input my Oracle support credentials I get an error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
Proxy settings in EOM are set for https, but not sure about the realm, I input our damain address "company.corp"
test successful :
https://updates.oracle.com was tested successfully using the Proxy.
Go to set oracle support credentials error :
Unable to complete network operation against My Oracle Support. Please check network connectivity to Oracle Support Site.
In the emoms.log file :
2012-07-22 18:28:50,753 [EMUI_18_28_49_/console/admin/rep/proxy/server] ERROR core.patch logp.251 - [EM-01942] Unable to connect to internet via the proxy. Http Proxy - company:80. Destination URL - https://server:proxy/emd/main/. Protocol - https. Error Message - Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. ).
java.io.IOException: Cannot establish proxy connection: 502 Proxy Error ( The specified Secure Sockets Layer (SSL) port is not allowed. Forefront TMG is not configured to allow SSL requests from this port. Most Web browsers use port 443 for SSL requests. )

Please check the following section in
http://docs.oracle.com/cd/E24628_01/install.121/e24089/firewalls.htm#EMADV626
Enabling Oracle Management Service to Access My Oracle Support
Unless online access to the Internet is strictly forbidden in your environment, Oracle Management Service should be enabled to access My Oracle Support. This access is necessary to enable updates and patches to be downloaded, for example.
At minimum, the following URLs should be made available through the firewall:
aru-akam.oracle.com
ccr.oracle.com
login.oracle.com
support.oracle.com
updates.oracle.com
About the dontProxyfor Property
When you configure the Oracle Management Service or a Management Agent to use a proxy server, it is important to understand the purpose of the dontProxyFor property, which identifies specific URL domains for which the proxy will not be used.
For example, suppose the following were true:
You have installed the Oracle Management Service and several Management Agents on hosts that are inside the company firewall. These hosts are in the internal .example.com and .example.us.com domains.
You have installed several additional Management Agents on hosts that are outside the firewall. These hosts are installed in the .example.uk domain.
You have configured Enterprise Manager to automatically check for critical software patches on My Oracle Support.
In this scenario, you want the Oracle Management Service to connect directly to the Management Agents inside the firewall without using the proxy server. On the other hand, you want the Oracle Management Service to use the proxy server to contact the Management Agents outside the firewall, as well as the My Oracle Support site, which resides at the following URL:
http://support.oracle.com
The following properties will prevent the Oracle Management Service from using the proxy server for connections to the Management Agents inside the firewall. Connections to My Oracle Support and to Management Agents outside the firewall will be routed through the proxy server:
proxyHost=proxy42.example.com
proxyHost=80
dontProxyFor=.example.com, .example.us.com
PS: Cygwin has nothing to do with My Oracle Support connection. Cygwin is ONLY required for agent deployment using agent push from OMS.

CS5.5 Subscription: Unable to connect to internet.

So, for two days, I've been unable to use either of the two Creative Suite 5.5 Master Collection licenses I'm currently subscribing to and paying a pretty penny for. Yesterday, Adobe customer support informed me that something must be "wrong with my machine", so, I dutifully did all of the testing, cleaning up, repairing and troubleshooting I could think of on that machine. CS5.5 Subscription on that one still doesn't work. Today, I attempted to use the other license I'm paying for on a different machine, with the exact same results.
When attempting to open any of the products, I get this message:
When I click Try Again, I get this one, which stays on this screen and never changes:
As you can imagine, I'm fairly certain I'm connected to the internet, since I'm typing this in the forum right now. I've attempted a wired connection, wireless connection and my MiFi connection, restarted, stood on one foot while patting my head, and attempted to bribe my software, with the same results each time.
Specs:
MacBook Pro 15" / Snow Leopard
Mac Mini / Lion
To reiterate, here are the steps I've attempted:
Repair permissions
Repair disk
Multiple restarts
Move from Wired to Wireless connection
Move from Wireless to MiFi connection
This isn't an issue with Lion, since it's occuring on both machines with different serial numbers. This is a problem with Adobe's subscription licensing server, or a problem with the way the software connects to it. Any assistance is appreciated, and the quicker I get it, the happier I'll be, since this has already caused me to fall behind on a deadline. At this point, I'm considering canceling the monthly subscription and reinstalling my version of CS4, which, while missing some of the features I upgraded to CS5.5 for, at least works.
Side note for Adobe personnel: It's not entirely clear in your FAQs for the subscription editions that you have to be connected to the internet every single time you open the software.

I'm getting that exact same message. Started today and it's driving me crazy. I can't find any information on error code 194:100. I talked to customer support through chat and they hadn't any clue as to what error 194:100 could be. They said it was technical and I should contact tecnical support. Why anyone would want to talk to a support agent that cannot fix problems and just generally tells you to call the real customer support, I have no idea.
This is the second time I've had problems with my software activation. It was slightly different but similar in several ways. I figured I'd metion some specifics to see if it matches more or less anyone else's problems.
Both times I've noticed I've had trouble with my adobe account id. Specifically I can log in just fine but I can't access the acount info section. I get a page not found error.
This time around I noticed many other weird things.
Adobe updater disappeared from my mac.
Encoder refused to encode certain premeire sequences.
Premiere froze on export of those same sequences.
And I first got the Unable to Connect to internet error this morning. Followed shortly The "Activation Failure error code #194:100" one. I've uninstalled and reinstalled several times and Premiere seems to run fine at least once. But if I try to open any other adobe application or if I load another project I get error 194:100.
The first time I had Activation Problems I ended up having to return the software, wait for the refund, delete my adobe id account, create a new one and buy it again with the new account.
I hope this is not a repeat of last time cause I'm seriously not rebuying defective software a third time.
I don't know if this helps but your problem seemed similar to mine.
15" Macbook pro 2.66 GHz Intel Core i7
NVidia GeForce GT 330M
OSX 10.6.8Snow Leopard
4GB DDR3 Ram

HT4623 iphone 5 unable to connect to internet

iphne 5 unable to connect to internet

I had the same issue and usually a reset of all the network settings on iphone did the trick.
this method did not work with my iphone 5 . i did something in router settings that seemed to change things a lot, for the better.
the wifi channel usually the routers use is channel 11, so i changed mine to channel 1. this solved my issues and the iphone connected just fine to the network, without restarting the iphone or resetting any settings or switching off and back on the wifi.
i am on 6.1.3 iOS

HT4623 After ios update on my ipad mini i am unable to connect to internet via cellular connection

i Have update ios 7.0.2 on my ipad mini. But after update of ios 7.0.2 i am unable to connect to internet via cellulau connection. Cellular connection appears on my screen but i get error as "Could not activate cellular data network you are not subscribed to a cellular data service". Cellular connection was working prior to ios 7.0.2 update. Please help.

GOT MINE FIXED -
THE 7.0.3 update reported my iPhone as LOST or STOLEN to Verizon.
They suspended my iPhone service immediately (as I would expect them to) and THAT is why I couldn't get on.
Called Verizon wireless - they restored me in 30 seconds - EVERYTHING WORKS AGAIN.
They said "we've been doing this ALL MORNING."
Hope this works for others, too!
You blow bright orange chunks, Microsoft, er, I mean, Apple.

When i try to load ios 7 to my i phone i receive error message unable to connect to internet however my internet is connected

I am trying to download ios 7 using i tunes application - get screen saying got download - press to download then recieve message unable to connect to internet please check connect and retry - however I am connected and so is my phone via wireless - I can not get past this error message please help. many thanks

Moved to Adobe Digital Editions forum.
Neil

Can't activate cs5 cause, keeps telling me unable to connect to internet, although am connected

can't activate cs5 cause, keeps telling me unable to connect to internet, although am connected, any help please ?

it's a downloaded file. When i failed to activate it, i tried it trial bs it's expired and i wanna activate it . The serial number is right but it keeps telling me unable to connect to internet :s :s

I am unable to connect to internet through my tata photon ZTE device.I am on OS X MAVERICKS VERSION 10.9.2.

I am unable to connect to internet through my TATA PHOTON + ZTE device.
Please help.

https://discussions.apple.com/thread/3680625?tstart=30
Best.

Wi-fi link is ok (strong signal), but safari is unable to connect to internet. Some setup I'm missing?

Wi-fi link is ok (strong signal), but safari is unable to connect to internet. Some setup I'm missing?

Does the iPod connect to other networks?
Do other devices sucessfully connect?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

Mac OS X will not connect to wifi, airport is broken, will connect to internet with ethernet cord. Is there an accessory I can buy to replace airport so I don't have to use ethernet cord? Please help!!

Since the MacBook Pro currently works, you should put it next to the iMac and compare the network settings for AirPort in System Preferences Network pane Advanced. Also, if you want to start off with the default network settings, you can use Location drop down menu and select +Edit Locations+. Then click the plus sign to create a new location. Set up that new location.
On System Preferences Network pane, AirPort should appear at the top of the list (in the sidebar). To change the service order, click on the gear icon and select +Set Service Order+.
Some additional tests you can try, on top of seeing if it works with (1) WEP security disabled and (2) a direct wired connection to the router.
If you get it to work with either (1) or (2), be sure to run Software Update at least two times to apply any recent updates from Apple. See if that makes any difference to using AirPort with WEP back on.
(3) Start up in Safe Mode
http://support.apple.com/kb/HT1455
I don't know if any third-party software has been installed on the iMac at this point, but Safe Mode will start up with only the essential Apple extensions and processes running. See if it works any better in Safe Mode.
(4) Create a new admin user account in System Preferences Accounts pane
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8235.html
Log out and log in to the new account. Try connecting with AirPort in the new account.
(5) Connect the MacBook Pro to the router with a wired Ethernet connection. Make sure its Internet access works. On System Preferences Sharing pane, set it up for +Internet Sharing+ so that it is set to +Share your connection from Ethernet - To computers using AirPort+. On the iMac, try to connect to that wireless network and access the Internet.
That last one (5) may be a good one to try first. It would at least show that the iMac's AirPort is working - you can even set it up to use WEP. If you have any questions about using the +Internal Sharing+ feature, please ask.

9780 style unable to connect to internet

My style which has basically verizon based cdma network device ,i am using it testing it in india,i am unable to connect to internet,though i upgraded os successfully.AnyBody help me out on this.
Similarly i have a curve 9300 device ,which also similar sort of problem,i did not wipe the os and reinstall it,Is there any other work around for this.
Regards
Rakesh Shankar.P

I am trying to connect to the my wifi,it gets connected but cannot access it.

Windows 7 PC + Airport Xtreme unable to connect to internet

Similar Messages

Maybe you are looking for