Windows 7 status 0xc000000e : A lot of machines can´t start
Scenario:
Since 3-March-2015 a lot of computers in my company failed to start. The message error appeared is:
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your windows installation disc and
restart your computer.
2. Choose your lenguage settings, and then click
"Next".
3. Click "Repair your computer".
Status: 0xc000000e
Info:The boot selection failed because a required device is inaccesible"
Issues:
-The error appeared in around 200 computers at the same time.
-All the computers are running Windows 7 Professional, but a couple of computer were running Windows 7 Ultimate
-We use to do images to install the machines, I read that this could be one of the reason of the fail
-I ordered not to restart computers since March the 5th, normally a repaired computer restart with no problema but in couple of machines the error apear once again and we have to reinstalle them. We have still a bunch of computers the dont´s reboot since
before March the 3rd, so we know they are going to fail in the next reboot
-My first though was that something was wrong with Kaspersky, we asked for support to them but nothing was found relating the fail and kaspersky products
-If I run sfc/scannow in a machine that I know it can fail there is a bunch of messages showing errors in some files, normaly in sysWow64 directory, but I don´t know if this is relevant
So, what I´d like to know:
1-What files are misssing/corrupted
2-What procces caused that
Thanks in advance.
Serafin.
Thank Karem for you advices. I answer to your questions:
1-Have you done any changes recently actually? No, excepting the stuff around AD: GPO updates, Windows updates and that kind of stuff
2-After run sfc command, what's exact output? Basically it´s a large log file. I will search for relevant information and post it here
3-Have you tried the links's solution Machine provided? What's repair method you used for 50% successful computers? I perform automatic boot repair in Windows RE. If it fails a perform a restore point in Windows RE. If it fails I reinstall the PC
4-"I would like to suggest you rebuild the boot section with Bootrec.exe". I tried in two machines, it worked in one of them.
Thanks, I will be back with the log file after runnig scf/scannow
Similar Messages
-
SAP dispatcher status is stopped in Console how can i start it
Hi All
Help me out
*SAP dispatcher status is stopped in Console how can i start it
Dispatcher turns green to yellow suddenly and status changes to stopped and all WP elemets shows status as ended.
Alert from Syslog : SAP Basis System: Message server disconnected
Tracert : Disp+work.exe
trc file: "dev_disp", trc level: 1, release: "640"
Thu Oct 02 12:32:52 2008
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 21
intno 20020600
make: multithreaded, ASCII
pid 736
***LOG Q00=> DpSapEnvInit, DPStart (00 736) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 21 successfully loaded
shared lib "dw_xtc.dll" version 21 successfully loaded
shared lib "dw_stl.dll" version 21 successfully loaded
shared lib "dw_gui.dll" version 21 successfully loaded
Thu Oct 02 12:32:58 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05270040, size: 2505416)
DpShMCreate: allocated sys_adm at 05270040
DpShMCreate: allocated wp_adm at 052717A8
DpShMCreate: allocated tm_adm_list at 05273188
DpShMCreate: allocated tm_adm at 052731B0
DpShMCreate: allocated wp_ca_adm at 054910F8
DpShMCreate: allocated appc_ca_adm at 05495748
DpShMCreate: allocated comm_adm_list at 05496EB8
DpShMCreate: allocated comm_adm at 05496ED0
DpShMCreate: allocated vmc_adm_list at 054C5CD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 054C5CF8
DpShMCreate: allocated wall_adm at 054C5D00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2450 MB
<ES> 2449 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( home) [dpxxdisp.c 9719]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 21
Release check o.K.
Thu Oct 02 12:33:38 2008
ERROR => W0 (pid 1500) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3796) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3548) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 1464) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3368) died [dpxxdisp.c 12170]
ERROR => W5 (pid 3400) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 2620) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 380) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-1500 (SIGUSR2)
ERROR => DpWpKill(1500, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3796 (SIGUSR2)
ERROR => DpWpKill(3796, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3548 (SIGUSR2)
ERROR => DpWpKill(3548, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1464 (SIGUSR2)
ERROR => DpWpKill(1464, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3368 (SIGUSR2)
ERROR => DpWpKill(3368, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3400 (SIGUSR2)
ERROR => DpWpKill(3400, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-2620 (SIGUSR2)
ERROR => DpWpKill(2620, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-380 (SIGUSR2)
ERROR => DpWpKill(380, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:48 2008
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Thu Oct 02 07:03:48 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1500 Ended no 1 0 0
1 DIA 3796 Ended no 1 0 0
2 UPD 3548 Ended no 1 0 0
3 ENQ 1464 Ended no 1 0 0
4 BTC 3368 Ended no 1 0 0
5 BTC 3400 Ended no 1 0 0
6 SPO 2620 Ended no 1 0 0
7 UP2 380 Ended no 1 0 0
Dispatcher Queue Statistics Thu Oct 02 07:03:48 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
8
8
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Thu Oct 02 07:03:48 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Oct 02 07:03:48 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:53 2008
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (676) (SOFT_KILL)
Stop icman
killing process (924) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:676 HANDLE:1564)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Oct 02 12:33:54 2008
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:676 HANDLE:1564)
[DpProcDied] Process died (PID:924 HANDLE:1556)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'home'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1572
MsIDetach: detach MS-system
EsCleanup ....
Thu Oct 02 12:33:55 2008
***LOG Q05=> DpHalt, DPStop ( 736) [dpxxdisp.c 8478]
Good Bye .....
Trace from WP table DIA 1
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Thu Oct 02 12:32:59 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.19)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 21
M intno 20020600
M make: multithreaded, ASCII
M pid 1500
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1500) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 6624 (828)
M DpShMCreate: sizeof(tm_adm) 2219848 (11044)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (320)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05A70040, size: 2505416)
M DpShMCreate: allocated sys_adm at 05A70040
M DpShMCreate: allocated wp_adm at 05A717A8
M DpShMCreate: allocated tm_adm_list at 05A73188
M DpShMCreate: allocated tm_adm at 05A731B0
M DpShMCreate: allocated wp_ca_adm at 05C910F8
M DpShMCreate: allocated appc_ca_adm at 05C95748
M DpShMCreate: allocated comm_adm_list at 05C96EB8
M DpShMCreate: allocated comm_adm at 05C96ED0
M DpShMCreate: allocated vmc_adm_list at 05CC5CD0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 05CC5CF8
M DpShMCreate: allocated wall_adm at 05CC5D00
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation std
M <EsNT> Memory Reset enabled as NT default
X ES initialized.
M calling db_connect ...
C Got ORACLE_HOME=C:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPSUD's password
C Connecting as /@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
C Try to connect with default password
C Connecting as SAPSUD/<pwd>@SUD on connection 0 ...
C Attaching to DB Server SUD (con_hdl=0,svchp=040D325C,svrhp=040D3E34)
C Starting user session (con_hdl=0,svchp=040D325C,srvhp=040D3E34,usrhp=040DC614)
C *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1033
[dboci.c 3721]
C Detaching from DB Server (con_hdl=0,svchp=040D325C,srvhp=040D3E34)
C *** ERROR => CONNECT failed with sql error '1033'
[dbsloci.c 9753]
B ***LOG BV3=> severe db error 1033 ; work process is stopped [dbsh#2 @ 1195] [dbsh 1195 ]
B ***LOG BY2=> sql error 1033 performing CON [dblink#1 @ 419] [dblink 0419 ]
B ***LOG BY0=> ORA-01033: ORACLE initialization or shutdown in progress [dblink#1 @ 419] [dblink 0419 ]
M ***LOG R19=> tskh_init, db_connect ( DB-Connect 000256) [thxxhead.c 1271]
M in_ThErrHandle: 1
M *** ERROR => tskh_init: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 9379]
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M
M *****************************************************************************
M *
M * LOCATION SAP-Server home_SUD_00 on host home (wp 0)
M * ERROR tskh_init: db_connect
M *
M * TIME Thu Oct 02 12:32:59 2008
M * RELEASE 640
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 9555
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 246]
M Entering ThSetStatError
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1500) [dpnttool.c 357]
Thanks in advance please help me out
Edited by: sudhakar aleti on Oct 2, 2008 12:54 PM
Edited by: sudhakar aleti on Oct 2, 2008 12:56 PMHi All please find the result r3trans -d
4 ETW000 r3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 03.10.2008 - 11:02:35
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Oct 03 11:02:36 2008 5494 0.005494
4 ETW000 [dev trc ,00000] db_con_init called 40 0.005534
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 26 0.005560
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 33 0.005593
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 139566 0.145159
4 ETW000 [dev trc ,00000] using "C:\usr\sap\SUD\SYS\exe\run\dboraslib.dll"
4 ETW000 22 0.145181
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 7 0.145188
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 13 0.145201
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "640.00", patchlevel (0.19)
4 ETW000 2501 0.147702
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 12 0.147714
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 18 0.147732
4 ETW000 [dev trc ,00000] New connection 0 created 13 0.147745
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 15 0.147760
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 12391 0.160151
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 12 0.160163
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , con_max = 255, con_opt = 255, occ = NO
4 ETW000 14 0.160177
4 ETW000 [dev trc ,00000] Found ORACLE_HOME=C:\oracle\ora92 in Registry 796 0.160973
4 ETW000 [dev trc ,00000] -->oci_initialize 400 0.161373
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.WE8MSWIN1252
4 ETW000 34020 0.195393
4 ETW000 [dbsloci. ,00000] *** ERROR => Cannot connect: TNS-name missing 11 0.195404
2EETW169 no connect possible: "DBMS = ORACLE --- TWO_TASK = ''"
Thanks
Sudhakar A -
hi,
I am having a problem installing windows via bootcamp.
I already partitioned my hdd via Bootcamp, downloaded and copied all the supports for windows, and windows is on an external USB as well. I had to stop the process the other day, so i shut down the computer. Now I am trying to boot from the USB, but I cant get to that point where the computer should restart and windows would start installing.
. After restarting, holding command, it doesnt show up as bootable device.
How shall I move forward? My disk is already partitioned, and if i start the whole process from the beginning, it wants me to partition again - although I already made a 100GB partition for windows.
Please help me out.
best,
ZoltanSo, here is what happened when I tried to make it.(sorry for quality, i had to take them by phone)
At first when I opened it I saw that I could simply resolve it just by stretching the arrow at the bottom, giving the 100 GB back which I partitioned before via Bootcamp. At this point options was not available.
I didnt do it because you mentioned earlier that it might be not designed to install windows.
The second thing I tried I choose 1 Partition from Partition Layout. This time Options were available but I didnt see anything like GPT, the onces that are optionable are on the screenshot.
What do you think how shall I move on? I was thinking to give it a shot with option 1, just stretch it back and try everything from scratch. -
Windows Server 2008 not booting (\windows\system32\winload.exe - Status: 0xc000000e)
i have a Hp Server with two HDDs configured RAID 1 and installed Win Server 2008, after a power failure it is not booting and showing start up error Status: 0xc000000e.
tried all the methods showing on the same error page, when i am trying with CMD from Window DVD (repair option) i am getting only X:\ drive, it is not showing my C:\ and D:\. when i use Windows 7 DVD (just for troubleshoot) and select new install option,
it is showing my C:\ and D:\ with my correct Disk Usage and Free space, (so, my Data and Windows is available)
i saw lots of way to fix the issue, but without accessing to C:\ drive, how can i fix it? please anyone can help on this?Hi,
0xC000000E, or STATUS_NO_SUCH_DEVICE: the drive went unavailable, possibly a bad hard drive, disk array, and/or controller card.
Please also contact your hardware vendor HP to check the health of your hard disks.
Regards,
Arthur Li
TechNet Community Support -
Windows Virtual Machine Doesn't Start
I recently installed a clean install of windows 7 pro 64-bit. I installed windows XP mode as described on the microsoft website followed by the update provided but when I try to open windows virtual PC nothing happens. I click on the program icon and nothing happens. When I try to open windows XP mode I get the error message "Cannot start Windows Virtual PC Host Process. Check the System event log for more detials. Server execution failed" Once I check the event log there is nothing there. The PC I am running on supports hardware virtualization and it is enabled in the bios. My coworker just installed windows XP mode on the machine right next to mine and it works fine. Can someone please tell me how to get this thing to work. Running virtual 2007 is not an option.
Same problem.
In past i've used successful windows virtual pc, but now it won't work.
I tryed uninstallind the Windows6.1-KB958559-x64.msu update and the windows xp mode and deleting the old virtual machines.
After reinstall the Windows6.1-KB958559-x64.msu update the problem returns as before.
I get this error: "Cannot start Windows Virtual PC Host Process. Check the System event log for more detials. Server execution failed"
Looking at the event viewer into "Applications and Services Logs/Microsoft/Windows/Virtual PC/Admin" i find "Virtual machine ''. Error - Server execution failed"
(0x80080005)" and just before this message i get "One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again."
So i tryed a lot of times uninstalling and reinstalling, unsucessfully. What i can do?
XML of "Virtual machine ''. Error - Server execution failed" error:
Log Name: Microsoft-Windows-Virtual PC/Admin
Source: Microsoft-Windows-Virtual PC
Date: 05/03/2010 14:00:13
Event ID: 1000
Task Category: None
Level: Error
Keywords:
User: Riccardo-PC\Riccardo
Computer: Riccardo-PC
Description:
Virtual machine ''. Error - Server execution failed
(0x80080005)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Virtual PC" Guid="{A759B4BE-484C-414D-A97D-961D33C31A3D}" />
<EventID>1000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2010-03-05T13:00:13.453470800Z" />
<EventRecordID>295</EventRecordID>
<Correlation />
<Execution ProcessID="5032" ThreadID="4100" />
<Channel>Microsoft-Windows-Virtual PC/Admin</Channel>
<Computer>Riccardo-PC</Computer>
<Security UserID="S-1-5-21-653287977-206352491-2073433540-1000" />
</System>
<EventData>
<Data Name="String1">
</Data>
<Data Name="String2">Error - Server execution failed
(0x80080005)</Data>
</EventData>
</Event>
XML of "One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again."
Log Name: Microsoft-Windows-Virtual PC/Admin
Source: Microsoft-Windows-Virtual PC
Date: 05/03/2010 13:59:43
Event ID: 45
Task Category: None
Level: Error
Keywords:
User: Riccardo-PC\Riccardo
Computer: Riccardo-PC
Description:
One or more files from the Virtual PC installation are missing. Please reinstall Virtual PC and try again.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Virtual PC" Guid="{A759B4BE-484C-414D-A97D-961D33C31A3D}" />
<EventID>45</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2010-03-05T12:59:43.357816300Z" />
<EventRecordID>294</EventRecordID>
<Correlation />
<Execution ProcessID="4320" ThreadID="5100" />
<Channel>Microsoft-Windows-Virtual PC/Admin</Channel>
<Computer>Riccardo-PC</Computer>
<Security UserID="S-1-5-21-653287977-206352491-2073433540-1000" />
</System>
<EventData>
</EventData>
</Event> -
Windows machines can't join domain after 10.5.4 upgrade
Howdy folks,
I have a ticket open with Apple on this but am posting here in hopes that someone might have an idea for me.
I upgraded our Mac OS X Server 10.5.3 to 10.5.4 on Sunday, and this morning several users reported that their PCs running Windows XP SP2 were unable to login to the Windows domain hosted on this machine. It's the primary domain controller for the Windows users.
One thing to note is that I had to reinstall the server completely because the 10.5.4 patcher crashed, creating all kinds of mayhem. I did a fresh install of OS X Server 10.5 and immediately applied the 10.5.4 combo updater to it. I had to restore the Open Directory from an archival copy, and the SMB was created fresh. Not sure why but the SMB services weren't preserved by the Server settings export command in Server Admin.
I thought unbinding the PC from the Windows domain and then rebinding it with a new name would help, but I've been completely unable to add older computers to the domain, even after removing the old computer records first.
I've got a reproducible failure mode for this problem on a Windows XP virtual machine running on VMware Fusion on my Mac. Here's the method I've been using to create the failure:
1. Change Windows XP System name to something new that doesn't already have a computer record on the Mac OS X Server and reboot.
2. After the reboot, run "NewSID" program on Windows to globally change my Windows machine's SID to a new, random value, and reboot again.
3. Attempt to use the Network ID wizard in the Windows Control Panel to re-add the machine to the domain under a new name so there's no conflict with any old computer records floating around in Open Directory. After it prompts me to enter the username, password and domain name for a user who's authorized to add machines to the domain, I get a dialog box that displays this error:
"Your computer could not be joined to the domain because the following error has occurred:
An internal error occurred."
Not too informative.
Here are the error messages I see in /var/log/samba/log.smbd (searching for the new computer name in the search field):
netbios connect: name1=BIGMAC name2=JEFFVM6
netbios connect: local=bigmac remote=jeffvm6, name type = 0
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Computers record for account 'JEFFVM6$'
odssam_getgrnam gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Groups record for 'JEFFVM6$'!
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Computers record for account 'JEFFVM6$'
kDSStdAuthNewUser was successful for account "jeffvm6$"
At that point it's impossible to join the computer to the domain no matter what. The most puzzling thing is that SOME of our users were able to login without any problems whatever. The ones that were either physically off or somewhere else when the 10.5.4 upgrade was applied are the only PCs that seem to be having problems.
Any help at all is appreciated. I suspect this is some kind of a SID conflict because the SMB server had to be recreated from scratch, but have no idea how to fix the client, the server, or both to make the computer account creation process work.The problem is fixed.
The issue boils down to an argument between the Open Directory server on bigmac (the OS X Server machine) and the SMB server on bigmac. The crucial information I needed to solve this problem was located here: http://www.radiotope.com/node/61
The Open Directory database had to be restored from a backup following this weekend's problematic upgrade, and it had a different value for the SID for the Windows domain than the one used by the SMB server software itself. Even stranger was that the Open Directory database actually had the wrong domain name! The It was listed as "BIGMAC" in Open Directory, even though it was set to the correct Windows domain name in the SMB server.
The solution was to demote the SMB server from a Primary Domain Controller to a Standalone Machine, and then repromote it. Although I changed no values in the settings, and did not modify the plist containing the SID in the Open Directory via the Inspector in Workgroup Admin, after the SMB PDC was repromoted, the SIDs and the domain names in Open Directory and the SMB config agreed with each othe. Now new machines can join the domain and users can login just as they did before. No client-side modifications are necessary.
Hope this is helpful to someone else. It was quite the hair-pulling experience for a while there.
Jeff Kirk -
how to use airport time capsule on a dell portable pc with windows 7 taking in consideration that time machine doesn't run with Windows ?
TM does not work like that.
If you want files to use later.. do not use TM.
Or do not use TM to the same location. Plug a USB drive into the computer and use that as the target for the permanent backup.
Read some details of how TM works so you understand what it will do.
http://pondini.org/TM/Works.html
Use a clone or different software for a permanent backup.
http://pondini.org/TM/Clones.html
How to use TC
http://pondini.org/TM/Time_Capsule.html
This is helpful.. particularly Q3.
Why you don't want to use TM.
Q20 here. http://pondini.org/TM/FAQ.html -
Lync 2013 crashes on startup in Windows 8.1 on Dell latitude E6520 machines
Lync 2013 crashes on startup in Windows 8.1 on Dell latitude E6520 machines. Every E6520 with windows 8.1.
Error message is:
Log Name: Application
Source: Application Error
Date: 4/15/2014 3:54:06 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: ***
Description:
Faulting application name: lync.exe, version: 15.0.4420.1017, time stamp: 0x5067326f
Faulting module name: igdumd32.dll_unloaded, version: 9.17.10.3517, time stamp: 0x532b0b5b
Exception code: 0xc0000005
Fault offset: 0x00001040
Faulting process id: 0x10a0
Faulting application start time: 0x01cf58ecd02118cc
Faulting application path: C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
Faulting module path: igdumd32.dll
Report Id: 14b4ce16-c4e0-11e3-8255-8c705a44a074
Faulting package full name:
Faulting package-relative application ID:
Video driver in the image was originally out of date, changed the driver to the latest and greatest available straight from Intel for the Intel HD 3000 graphics card and this error still appears. Driver 9.17.10.3517 exceeds the minimum requirement
for Lync 2013. The faulting module is related to the graphics driver, but reinstalling does nothing, uninstalling and then reinstalling does nothing, it cannot further be upgraded. This same error affects all the Dell latitude e6520's. It
also only occurs in Windows 8.1. The windows 7 image using the exact same driver version (both the outdated driver and latest driver) works just fine with Lync 2013.
Running Lync with administrative permissions does nothing, disabling hardware acceleration did nothing. None of our laptops come with the bluetooth adapter, and also updated all other drivers such as chipset and soundcard. Error occurs on the
RTM version of Lync, and Lync with SP1 fully updated. The rest of Office 2013 works fine. I am currently at a loss here short of telling the help desk to not image E6520's with Windows 8.1 because Lync 2013 doesn't work on it. But there has
to be a reason for it. Calling out for some suggestions here.
Thanks!We also have the same issue with Dell E6420 running Windows 8.1. Lync application does not respond after start-up. Did you try looking for the error file under
C:\users\username\appdata\local\Microsoft\Windows\WER\Reportarchive
it should create file like AppHang_lync.exe_some numbers. search for the latest one.
Interesting, I don't have any 6420's handy but figured the issue would exist on those also. I looked up the location you mention and see many crash logs for Lync. Not really sure what the error is, just says it stopped working.
Version=1
EventType=BEX
EventTime=130420688460358806
ReportType=2
Consent=1
UploadTime=130420688461296414
ReportIdentifier=14b4ce17-c4e0-11e3-8255-8c705a44a074
IntegratorReportIdentifier=14b4ce16-c4e0-11e3-8255-8c705a44a074
WOW64=1
Response.BucketId=3a18275b4e359a3d32b33b327b07846b
Response.BucketTable=5
Response.LegacyBucketId=81648064370
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=lync.exe
Sig[1].Name=Application Version
Sig[1].Value=15.0.4420.1017
Sig[2].Name=Application Timestamp
Sig[2].Value=5067326f
Sig[3].Name=Fault Module Name
Sig[3].Value=igdumd32.dll_unloaded
Sig[4].Name=Fault Module Version
Sig[4].Value=9.17.10.3517
Sig[5].Name=Fault Module Timestamp
Sig[5].Value=532b0b5b
Sig[6].Name=Exception Offset
Sig[6].Value=00001040
Sig[7].Name=Exception Code
Sig[7].Value=c0000005
Sig[8].Name=Exception Data
Sig[8].Value=00000008
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=6.3.9600.2.0.0.256.4
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=1033
UI[2]=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
UI[3]=Microsoft Lync has stopped working
UI[4]=Windows can check online for a solution to the problem.
UI[5]=Check online for a solution and close the program
UI[6]=Check online for a solution later and close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
LoadedModule[1]=C:\windows\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\windows\SYSTEM32\KERNEL32.DLL
LoadedModule[3]=C:\windows\SYSTEM32\KERNELBASE.dll
LoadedModule[4]=C:\windows\system32\apphelp.dll
LoadedModule[5]=C:\windows\SYSTEM32\ADVAPI32.dll
LoadedModule[6]=C:\windows\SYSTEM32\ole32.dll
LoadedModule[7]=C:\windows\SYSTEM32\OLEAUT32.dll
LoadedModule[8]=C:\windows\SYSTEM32\MSVCR100.dll
LoadedModule[9]=C:\Program Files (x86)\Microsoft Office\Office15\LyncModelProxy.dll
LoadedModule[10]=C:\Program Files (x86)\Microsoft Office\Office15\LyncDesktopViewModel.dll
LoadedModule[11]=C:\Program Files (x86)\Microsoft Office\Office15\PropertyModel.dll
LoadedModule[12]=C:\Program Files (x86)\Microsoft Office\Office15\PropertyModelProxy.dll
LoadedModule[13]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMvrAs.dll
LoadedModule[14]=C:\windows\SYSTEM32\MSVCP100.dll
LoadedModule[15]=C:\windows\WinSxS\x86_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.9600.16384_none_dadf89385bc5c7d7\gdiplus.dll
LoadedModule[16]=C:\windows\SYSTEM32\IMM32.dll
LoadedModule[17]=C:\windows\SYSTEM32\MSIMG32.dll
LoadedModule[18]=C:\windows\SYSTEM32\DWrite.dll
LoadedModule[19]=C:\windows\SYSTEM32\msvcrt.dll
LoadedModule[20]=C:\windows\SYSTEM32\sechost.dll
LoadedModule[21]=C:\windows\SYSTEM32\RPCRT4.dll
LoadedModule[22]=C:\windows\SYSTEM32\combase.dll
LoadedModule[23]=C:\windows\SYSTEM32\GDI32.dll
LoadedModule[24]=C:\windows\SYSTEM32\USER32.dll
LoadedModule[25]=C:\windows\SYSTEM32\MSVCR110.dll
LoadedModule[26]=C:\Program Files (x86)\Microsoft Office\Office15\RtmPal.dll
LoadedModule[27]=C:\Program Files (x86)\Microsoft Office\Office15\RtmCodecs.dll
LoadedModule[28]=C:\windows\SYSTEM32\dxva2.dll
LoadedModule[29]=C:\windows\SYSTEM32\d3d9.dll
LoadedModule[30]=C:\windows\SYSTEM32\d3d11.dll
LoadedModule[31]=C:\windows\SYSTEM32\MSCTF.dll
LoadedModule[32]=C:\windows\SYSTEM32\SspiCli.dll
LoadedModule[33]=C:\windows\SYSTEM32\WINMM.dll
LoadedModule[34]=C:\windows\SYSTEM32\WS2_32.dll
LoadedModule[35]=C:\windows\SYSTEM32\PSAPI.DLL
LoadedModule[36]=C:\windows\SYSTEM32\POWRPROF.dll
LoadedModule[37]=C:\windows\SYSTEM32\pdh.dll
LoadedModule[38]=C:\windows\SYSTEM32\MSVCP110.dll
LoadedModule[39]=C:\windows\SYSTEM32\IPHLPAPI.DLL
LoadedModule[40]=C:\Program Files (x86)\Microsoft Office\Office15\dbghelp.dll
LoadedModule[41]=C:\windows\SYSTEM32\bcrypt.dll
LoadedModule[42]=C:\windows\SYSTEM32\SETUPAPI.dll
LoadedModule[43]=C:\windows\SYSTEM32\WTSAPI32.dll
LoadedModule[44]=C:\windows\SYSTEM32\PROPSYS.dll
LoadedModule[45]=C:\windows\SYSTEM32\VERSION.dll
LoadedModule[46]=C:\windows\SYSTEM32\dwmapi.dll
LoadedModule[47]=C:\windows\SYSTEM32\dxgi.dll
LoadedModule[48]=C:\windows\SYSTEM32\CRYPTBASE.dll
LoadedModule[49]=C:\windows\SYSTEM32\WINMMBASE.dll
LoadedModule[50]=C:\windows\SYSTEM32\NSI.dll
LoadedModule[51]=C:\windows\SYSTEM32\WINNSI.DLL
LoadedModule[52]=C:\windows\SYSTEM32\CFGMGR32.dll
LoadedModule[53]=C:\windows\SYSTEM32\bcryptPrimitives.dll
LoadedModule[54]=C:\windows\SYSTEM32\DEVOBJ.dll
LoadedModule[55]=C:\windows\SYSTEM32\nvinit.dll
LoadedModule[56]=C:\PROGRA~2\Sophos\SOPHOS~1\SOPHOS~1.DLL
LoadedModule[57]=C:\Program Files (x86)\Common Files\Microsoft Shared\Office15\mso.dll
LoadedModule[58]=C:\windows\SYSTEM32\d2d1.dll
LoadedModule[59]=C:\windows\system32\uxtheme.dll
LoadedModule[60]=C:\windows\SYSTEM32\WINSTA.dll
LoadedModule[61]=C:\windows\SYSTEM32\SHELL32.dll
LoadedModule[62]=C:\windows\SYSTEM32\SHLWAPI.dll
LoadedModule[63]=C:\windows\SYSTEM32\shcore.dll
LoadedModule[64]=C:\windows\SYSTEM32\kernel.appcore.dll
LoadedModule[65]=C:\Program Files (x86)\Microsoft Office\Office15\Uc.dll
LoadedModule[66]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMvrCs.dll
LoadedModule[67]=C:\windows\SYSTEM32\WINSPOOL.DRV
LoadedModule[68]=C:\windows\SYSTEM32\HID.DLL
LoadedModule[69]=C:\windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.9600.16384_none_a9f4965301334e09\Comctl32.dll
LoadedModule[70]=C:\windows\SYSTEM32\msi.dll
LoadedModule[71]=C:\Program Files (x86)\Microsoft Office\Office15\1033\lyncDesktopResources.dll
LoadedModule[72]=C:\windows\SYSTEM32\DavClnt.DLL
LoadedModule[73]=C:\windows\SYSTEM32\DAVHLPR.dll
LoadedModule[74]=C:\windows\SYSTEM32\d3d10_1.dll
LoadedModule[75]=C:\windows\SYSTEM32\d3d10_1core.dll
LoadedModule[76]=C:\windows\SYSTEM32\D3D10Warp.dll
LoadedModule[77]=C:\windows\SYSTEM32\sppc.dll
LoadedModule[78]=C:\windows\SYSTEM32\Secur32.dll
LoadedModule[79]=C:\windows\SYSTEM32\clbcatq.dll
LoadedModule[80]=C:\Program Files (x86)\Microsoft Office\Office15\UccApi.dll
LoadedModule[81]=C:\Program Files (x86)\Microsoft Office\Office15\Win32MsgQueue.dll
LoadedModule[82]=C:\windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_5.82.9600.16384_none_7c55c866aa0c3ff0\Comctl32.dll
LoadedModule[83]=C:\Program Files (x86)\Microsoft Office\Office15\1033\ocapires.dll
LoadedModule[84]=C:\Program Files (x86)\Microsoft Office\Office15\Psom.dll
LoadedModule[85]=C:\Windows\SYSTEM32\msxml6.dll
LoadedModule[86]=C:\Program Files (x86)\Microsoft Office\Office15\OcImport.DLL
LoadedModule[87]=C:\Program Files (x86)\Microsoft Office\Office15\ocrec.dll
LoadedModule[88]=C:\windows\system32\mlang.dll
LoadedModule[89]=C:\windows\SYSTEM32\usp10.dll
LoadedModule[90]=C:\windows\system32\windowscodecs.dll
LoadedModule[91]=C:\Program Files (x86)\Microsoft Office\Office15\RtmMediaManager.dll
LoadedModule[92]=C:\windows\SYSTEM32\AVRT.DLL
LoadedModule[93]=C:\Program Files (x86)\Microsoft Office\Office15\AppSharingMediaProvider.dll
LoadedModule[94]=C:\Program Files (x86)\Microsoft Office\Office15\RTMPLTFM.dll
LoadedModule[95]=C:\windows\SYSTEM32\WINTRUST.dll
LoadedModule[96]=C:\windows\SYSTEM32\CRYPT32.dll
LoadedModule[97]=C:\windows\SYSTEM32\MSASN1.dll
LoadedModule[98]=C:\ProgramData\Sophos\Web Intelligence\swi_ifslsp.dll
LoadedModule[99]=C:\windows\system32\mswsock.dll
LoadedModule[100]=C:\windows\SYSTEM32\dhcpcsvc6.DLL
LoadedModule[101]=C:\windows\SYSTEM32\dhcpcsvc.DLL
LoadedModule[102]=C:\windows\SYSTEM32\wlanapi.dll
LoadedModule[103]=C:\windows\System32\MMDevApi.dll
LoadedModule[104]=C:\windows\SYSTEM32\MFPlat.dll
LoadedModule[105]=C:\windows\SYSTEM32\RTWorkQ.DLL
LoadedModule[106]=C:\Program Files (x86)\Intel\Media SDK\mfx_mft_h264ve_32.dll
LoadedModule[107]=C:\windows\SYSTEM32\EVR.dll
LoadedModule[108]=C:\windows\system32\NV\nvumdshim.dll
LoadedModule[109]=C:\windows\system32\nvd3dum.dll
State[0].Key=Transport.DoneStage1
State[0].Value=1
FriendlyEventName=Stopped working
ConsentKey=BEX
AppName=Microsoft Lync
AppPath=C:\Program Files (x86)\Microsoft Office\Office15\lync.exe
ApplicationIdentity=00000000000000000000000000000000 -
I have iTunes installed on my Windows 7 machine. When waking up my Windows 7 machine I get a message that says that APSDaemon.exe can't start because MSVCR80.dll is missing. I'm directed to reintall the applicaton. Is this iTunes related? If so, what do I need to do?
See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Windows 7 Supplicant Configuration - ISE PEAP w Machine Auth
Can anyone tell me the settings for the Windows 7 supplicant that works with ISE and PEAP using machine authentication? I have an authorization profile that permits the user login only after machine 'WasAuthenticated'. I have only found this to work by setting the Windows 7 supplicant up to use Single-Sign-On before Windows logon and to specify 'User or Machine' authentication. Then I'm only successful if I have both wired and wireless connected/on and I perform a logoff/reboot. Surely this isn't right. What if a user logs on without any connection with cached credentials and then wants to use wireless? Can't they just perform both machine and user auth over the wireless connection regardless of prior machine/auth states? I used the videos from LABMINUTES to configure the policies, but I don't need the ACLs for the WLAN controller because these are autonomous APs.
Regards,
ScottMicrosoft will send both and only cares if one passes. This is the same with radius. ACS and ISE allows you to check to see if the user was authenticated which happens initially on boot. After the initial machine auth, the windows machine will only send user creds. The was machine auth is a workaround to be able to do both. The issue is that when the timeout of the machine creds happen, the devices has to be rebooted. In Cisco Live 2012, they even suggested you don't do this due to not knowing when the cached credentials ACS or ISE will keep this info.
Sent from Cisco Technical Support iPhone App -
Windows side of my machine can't connect.
Hey guys, I'm using a Macbook Pro 15 inch with both windows and mac on it.
A while back, we got a new airport extreme to replace our old wireless router, and the mac side of my machine can connect to it, but the windows side is being a pain about it. I already got the HEX version of my password and tried to use it, but windows still can't connect. Any ideas?What you’re saying doesn’t make sense. Port 25 is for the outgoing server. There is no way you would get a port 25 time-out error while trying to access your Mail on one computer but not on the other if the settings were the same on both.
Either you’re getting this error when sending mail (which is not the problem you’re describing), or the incoming server port setting (i.e. Preferences > Accounts > Advanced > Port) is wrong (and cannot be the same as on the other computer if Mail works fine there). -
Windows 7 'File server' disconnects when XP machine connects to network
Hi guys,
We have a small office setup here, we have two Windows 7 machines, three Windows XP machines and one Windows 7 machine that acts as a fileserver (folder sharing and an SVN repository).
Every morning, I turn up to work, turn on my Windows 7 machine and the system works fine, but, as soon as one of my collegues turn up and boot up their Windows XP machines, the fileserver disconnects. The only way to get the fileserver up and running is
to restart it, this is obviously tedious and irritating. It only happens when an XP machine connects to the network and not when a Windows 7 machine connects.
Does anybody have an experience with this sort of issue or have an suggestions to resolve it?
Thanks, Simon.Firstly, I am a Tier III Computer Technician/Software Programmer/Network Engineer who has been working on MS OS' since DOS3.
Secondly, Someone named Alex Zhaozx gets the ID10T award as he marked this as a solution. Alex... How is posting a MS OS license a resolve?
There is no resolution posted here.
For understanding, all references to Windows 7 will be marked as TRAP7 in the following info. After reading, you will understand why.
The other major note Simon has not mentioned, is that when the "disconnect" happens, all Windows XP machines can still interface with each other over the network perfectly (accessing each others Shares and drive mappings with zero network connection
issues). The TRAP7 machines can interface will all facets of each of the TRAP7 and Windows XP computers on the network with zero connection issues. It appears MS has placed a condition or timer to cause the disconnect to XP on introduction to the network. Simon
is slightly incorrect is his statement this only happens when a XP machine is booted, as it happens on all connection methods (whether it be wake from sleep and attempt to reconnect or access TRAP7 share/drive, idle computer attempting to access TRAP7 share/drive,
Windows XP computer attempting to access files on the TRAP7 file server for the first time, after each have been up and running independently (on the network) perfectly for hours...
We have a larger scope than Simon with 45 machines and 17 of them being Windows XP, the others are TRAP7 (32 and 64 bit varied) with 1 on Vista (The beginning of the end for MS OS').
I have been searching all MS sites and the other techie sites for a resolve and there has not been one "valid" resolution to this problem they have caused. Or was is my fault for using Windows 7 on a near perfect network?
C'mon maaaan. (intended for Bill Gates) Get this resolved or get out of the OS game, there are so many better OS's out there. Stop TRYING to DO things and start DOING them the right instead.
Belief: This is an issue caused by MS with full intention of forcing everyone to fully convert all at once because they are not getting the money they used to, as the global economy is now whacked. You notice... They have never stepped up to say anything
in this post. They just quickly made an attempt to brush this under the carpet.
BTW Alex Z: When you are ready to step up and get involved, let me know. I will get you any technical information you need to get this resolved.
John -
after downloading itune to my dell computer (with windows vista), the DVD RW drive is disabled. The device status shows "device can not start (code 10)" Any suggestions? Thanks.
additional info.
I have found the correct error definition in english.
"can not start the device (Code 10)"
I have updated my bios to the latest version.
I have just tried to uninstall all USB-drivers, and reinstall them.. Still no luck
I have tried to uninstall and reinstall all webcam drivers - no luck -
Where system status of inspection lot is saved??
Dear All
Where system status of inspection lot is saved?? Any table or structure1. Goto table QALS with PRUEFLOS = inspection lot
2. Goto table JEST with OBJNR = QALS-OBJNR
You will receive one or more records of status.
Then go to table TJ02T check here .........
or
Bapi
BAPI_INSPLOT_GETSTATUS -
Can't start Windows Vista HELP!!!!
When booting Vista, the screen goes black with the following error:
=======================
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem :
1. Insert your Windows installation disk and restart your computer.
2. Choose your language settings, and then click "Next"
3. Click "Repair your computer"
If you do not have this disk, contact your system administrator or computer manufacturer for assistance.
File : acpi.sys
Status : 0xc0000098
Info : Windows failed to load because a requires file is missing, or corrupt.
I've used Windows repairing disc but it said the Startup Repair cann't repair the computer automatically.
Thanks for your help ahead!Ouch!
If the problem is really "just" a missing or corrupt acpi.sys, can you boot rescue & recovery (Think button) or boot a Linux live CD and copy in a clean copy of the file - if you can find one somewhere?
I haven't tried this with R&R, but I think download/copy in is one of its capabilities.
It goes in /windows/system32/drivers/ on my Vista 64 machine.
I've got a suspicion this isn't the whole problem, and the above is just a WAG.
Good Luck,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Maybe you are looking for
-
Display the id of new Record in the browse page of BC4J Struts App
I am working on an application using BC4J Struts with backbone on Oracle 8i.I am using DBSequence Type for my Employee ID.Since I am using this Id as search criteria for employee, I want to show Employee Id after insertion of new Employee.How can I d
-
see above. VERY FRUSTRATED. I don't have time for this! switching to another browser.
-
How to install Dragon Dictation on iPhone in Brazil?
I live in Santos, Brazil. For over a year I had been using Dragon Naturally Speaking version 11 and had been anxiously waiting for the iPhone version since November last, when I purchased my new iPhone 4. Recently, Dragon dictation has been released
-
How to transfer all files fr iPhone 3G to iPhone 5
How do I transfer all files from my iphone3g to iPhone 5? Fastest and easiest way please
-
Changing accounts on itunes to the ipod
I want to change my itunes account to my new account I made but I dont know how to switch them.