Windows 7 VM has DNS Problem When Using Wireless
Hello All,
I've been fighting this virtual machine networking problem for over a week now. If anyone has a well-informed suggestion (not a guess) I would appreciate hearing about it.
Here's the problem in a nutshell and then I'll give more details: I'm running Windows 7 Ultimate (64 bit) as my primary (i.e., host) OS. I'm running Windows 7 Home Professional (32 bit) as the guest OS in "Windows Virtual PC" (note that this is *not* the same as "Virtual PC 2007"). If I configure the VM to use my host's wired Ethernet connection, the guest OS can always see the machines on my local network and can always reach the Internet just fine. On the other hand, if I configure the VM to use only my host's wireless connection then the guest OS can still see machines on my local network but CANNOT reach the Internet, except very intermittently (e.g., for maybe 1-2 minutes every hour or so).
I've tried to anticipate the questions you might ask so here is some additional information:
The computer is a Lenovo W500 laptop running Windows 7 Ultimate, 64-bit. The wireless network adapter is an "Intel WiFi Link 5300 AGN".
My Internet connection is via AT&T DSL using a wire2 wireless modem/router.
I have all the updates from Microsoft and Lenovo for this machine. It is 100% up to date with the latest patches and drivers.
I'm running the 64-bit version (or at least I used the 64 bit installer) of "Windows Virtual PC" which I downloaded from this link.
I am *not* running and I did not download "XP Mode".
When the guest OS loses it's connection to the Internet the following message appears in the Windows Event Log:
"Name resolution for the name address.yahoo.com timed out after none of the configured DNS servers responded."
I am able to ping an external machines outside my network but only if I use the IP address. If I specify the host name it cannot be resolved.
ARE YOU GETTING THE IMPRRESSION THIS IS A DNS PROBLEM??? It looks like I do not have access to a DNS when using the host's wireless connection.
On the host OS, the "Virtual PC Network Filter Driver" *IS* installed and selected under my "Wireless Network Connection Properties" settings.
Below are the results of running ipconfig on the guest OS and then the host OS. Note that I am able to ping 192.168.1.254 from the host OS but not from the guest OS. I think this is the crux of the problem.
Here's what I get from an ipconfig /all executed on the guest OS:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Win7_01
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)
Physical Address. . . . . . . . . : 00-03-FF-5A-E5-8C
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::6452:ad20:724a:4d3a%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.75(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, May 14, 2010 7:22:30 PM
Lease Expires . . . . . . . . . . : Friday, May 21, 2010 7:22:30 PM
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 234882047
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-79-57-1A-00-03-FF-5A-E5-8C
DNS Servers . . . . . . . . . . . : 192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.gateway.2wire.net:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
And here's what I get when I do ipconfig /all on the host OS:
Windows IP Configuration
Host Name . . . . . . . . . . . . : LEONA
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Intel(R) WiFi Link 5300 AGN
Physical Address. . . . . . . . . : 00-21-6A-59-E5-8C
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::94b0:4080:c30f:95da%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.78(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, May 14, 2010 6:20:52 PM
Lease Expires . . . . . . . . . . : Friday, May 21, 2010 6:20:53 PM
Default Gateway . . . . . . . . . : 192.168.1.254
DHCP Server . . . . . . . . . . . : 192.168.1.254
DHCPv6 IAID . . . . . . . . . . . : 218112362
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-79-34-70-00-22-68-14-2F-CB
DNS Servers . . . . . . . . . . . : 192.168.1.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Intel(R) 82567LM Gigabit Network Connection
Physical Address. . . . . . . . . : 00-22-68-14-2F-CB
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.gateway.2wire.net:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : gateway.2wire.net
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e74:3ca6:3214:b4fb:72d4(Preferred)
Link-local IPv6 Address . . . . . : fe80::3ca6:3214:b4fb:72d4%13(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled
Hello,
I am not very familiar wth Microsoft Security Essentials, but believe that it just makes use of the existing Windows Firewall which is present with the operating system.
To me it is odd that the guest OS reports 192.168.1.254 as the IP address for its gateway and DHCP server yet it cannot access them when pinged. Let's try pinging from host to guest (and vice-versa) and see what happens:
From the host OS at 192.168.1.78, try pinging the guest OS at 192.168.1.75.
Then, from the guest OS at 192.168.1.75, trying ping the host OS at 192.168.1.78.
Is each operating system able to ping each other?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
Cannot email pdf using Acrobat Reader XI v11.0.3 in Windows 8. No problem when using in ms vista. ge
Cannot email pdf using Acrobat Reader XI v11.0.3 in Windows 8. No problem when using in ms vista. get "authentication error". Sometimes will get a very quick dialogue box showing the gmail login screen but then disappears. I use firefox and IE
Hi Rodney
Welcome to Apple Discussions
This sounds like one of those "oddities", contributed to by a few sources.
I can clear the Safari cache files as a temporary solution, but I encounter the same difficulties with the “problematic” files once they have been opened again.
Wondering if you disabled the Safari Cache would the refresh function work correctly? As a test you can disable the Safari Cache by Emptying the Cache first via the Safari menu, then Quit Safari. Now go to the Finder>Your User Library>Caches>Safari. Single click on the Safari folder, then Apple Key + I to open Info panel. There, check the "locked" box. This prevents further additions to the cache. The downside, you lose your ability to upload images etc. within Safari (my cache is disabled, so I use Firefox for the uploads).
Then restart Safari. Try the PDF from within Safari.
Post back -
When writing an e-mail directly on the Orange e-mail service (not on Thunderbird) I am facing the following problem : some distribution lists cannot be used to complete the adressees. The same lists can be used without difficulty if I use Internet Explorer instead of Firefox. The Orange hotline told me that probably my Firefox version was not updated. Unfortunately I checked that, and apparently the automatic updating works. I have also updated the plug ins, without any result.
Please could you specify which webpage you mean ?
The process with Orange is the following :
- 1. click on "Write an e-mail" on the mail webpage
- 2. click on "To" to reach the Contacts which opens a new window
- 3. click on "Distribution lists"
- 4. click on the selected list then click on "add". The list appears ot the box corresponding to the addresses .
UNTIL THEN EVERYTHING WORKS WELL
- 5. click on the button "validate", which closes the window previously opened and normally
- 6. reloads the initial page with the complete list on the line "To". Instead of that I get the last e-mail address I previously used .
Question : at which step of this process should I try your suggestions ? I tried when the initial page was reloaded with the wrong address, but it did not work to get back the rignt distribution list;
Note that the whole process functions with OTHER Distribution lists. The only difference is that the problematic one has a larger number of adresses (62) however inferior to the maximum indicated by Orange (100).
I also remind that there is no problem when using Internet Explorer instead of Firefox.
Thanks for your help ! -
Nokia N81 reboots when using wireless LAN
HAs anybody else come across this problem, I have a N81-3 with 8Gb sim card, basically when using wireless lan it reboots, I see there is a firmware upgrade that improves wifi stability but when using the software upgrader it says there are no updates available for my phone, any ideas.??
The CR-200 only charges at 750mA and I am not even sure that is 100% transferred through the Qi charging. Charging at less than 1A will likely not be enough to keep up with the drain from using the phone while navigating. I think it will use much more than that.
I use a Anker 13.000 mA battery with my phone while rinding my bike and have had several instances where I accidentally used the 1A output (it has both a 1 and 2 A output) to find that would actually not keep up with the phone running navigation and cycle tracking apps running (in addition to cellular and some other tasks).
Navigation _will_ require some serious amount sof power and _will_ in general make the phone feel warm to the touch. I very much doubt a wireless charger will be able to provide the juice needed to keep up the charge.
Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem.. -
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate
ORA-01403: no data found Problem when using AUTOMATIC ROW FETCH to populate a form.
1) Created a FORM on EMP using the wizards. This creates an AUTOMATIC ROW FETCH
TABLE NAME - EMP
Item Containing PRIMARY KEY - P2099_EMPNO
Primary key column - EMPNO
By default the automatic fetch has a ‘Process Error Message’ of ‘Unable to fetch row.’
2) Created a HTML region. Within this region add
text item P2099_FIND_EMPNO
Button GET_EMP to submit
Branch Modified the conditional branch created during button creation to set P2099_EMPNO with &P2099_FIND_EMPNO.
If I then run the page, enter an existing employee number into P2099_EMPNO and press the GET_EMP button the form is populated correctly. But if I enter an employee that does not exist then I get the oracle error ORA-01403: no data found and no form displayed but a message at the top of the page ‘Action Processed’.I was expecting a blank form to be displayed with the message ‘Unable to fetch row.’
I can work around this by making the automated fetch conditional so that it checks the row exists first. Modify the Fetch row from EMP automated fetch so that it is conditional
EXIST (SQL query returns at least one row)
select 'x'
from EMP
where EMPNO = :P2099_EMPNO
But this means that when the employee exists I must be fetching from the DB twice, once for the condition and then again for the actual row fetch.
Rather than the above work around is there something I can change so I don’t get the Oracle error? I’m now wondering if the automatic row fetch is only supposed to be used when linking a report to a form and that I should be writing the fetch process manually. The reason I haven’t at the moment is I’m trying to stick with the automatic wizard generation as much as I can.
Any ideas?
Thanks PeteHi Mike,
I've tried doing that but it doesn't seem to make any difference. If I turn debug on it shows below.
0.05: Computation point: AFTER_HEADER
0.05: Processing point: AFTER_HEADER
0.05: ...Process "Fetch Row from EMP": DML_FETCH_ROW (AFTER_HEADER) F|#OWNER#:EMP:P2099_EMPNO:EMPNO
0.05: Show ERROR page...
0.05: Performing rollback...
0.05: Processing point: AFTER_ERROR_HEADER
I don't really wan't the error page, either nothing with the form not being populated or a message at the top of the page.
Thanks Pete -
When using FireFox I often cannot view pictures in Hotmail emails, but I have no problem when using other browsers
Do you also have this issue if you temporarily switch to Private Browsing mode?
*https://support.mozilla.org/kb/Private+Browsing
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Select: [X] "Always use private browsing mode"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/fix-login-issues-on-websites-requrie-passwords -
Keynote presentations when using wireless libratone zipp speaker there is a 2sec delay before any slide containing video/audio plays - tried connection through apple TV still the same. Any ideas?
Thanks Gary, I think I should have mentioned that I have wired my other speakers and it works fine.
I just wanted to go wireless when presenting in front of class, simply to avoid trailing wires from the macbook which I position in front of me on a desk next to the projector and the speakers are behind me next to the screen.
I have struggled to find a solution, and reading through other discussions it is a problem that perhaps only Apple can solve.
I hope the new 'Yosemite' will resolve the problem.
Thank you once again for your reply. -
i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian
-
We use IE9.
I enter in https://gwserver.
Compose New mail (in Plain Text mode) with body:
Line-1
Line-2
Line-3
And send this mail , for example to itself.
the received letter will look like:
Line-1Line-2Line-3
Someone has the same problem?
SergAre you guys still on the shipping code of GW 12? Novell had a fix for this within a couple weeks of GW 12 being released from what I remember. Open an SR and get the latest code.
Or simply tell your users to user HTML.
Todd Bowman
Todd Bowman
Senior Network Analyst
University of Minnesota Physicians
612-884-0744
[email protected]
>>>
From: MarkDissington<[email protected]>
To:novell.support.groupwise.2012.web-access
Date: 5/24/2012 6:46 AM
Subject: Re: Problem when using IE9
skoltogyan;2197344 Wrote:
> The solution is?
>
> Serg
I would guess don't use IE9 until a fix is released? :-)
M.
MarkDissington
MarkDissington's Profile: http://forums.novell.com/member.php?userid=27611
View this thread: http://forums.novell.com/showthread.php?t=455634 -
[Solved] X11 has purple tint when using catalyst-test drivers
Hey guys, so I turned the TV on for my HTPC last night hoping to watch some anime. But when it turned on the screen had a purple tint! I tried to do some debugging over SSH from my phone while in bed, but decided to just go to sleep instead.
Tonight I narrowed down the problem a bit, it's certainly related to the catalyst drivers (No problems when using xf86-video-ati).
I'm noticing warnings from various programs that look like
libpng warning: iCCP: known incorrect sRGB profile
Taking a screenshot using `scrot` and viewing it the screen looks fine..
Here's my xorg.conf (which is just the default genearted by aticonfig --initial)
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:0:1:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
I suspected that it might have been a package upgrade, but downgrading packages that looked like they might have been the problem didn't solve anything.
Any ideas?
Edit: Just tried with xorg1.13 with Catalyst 13.4 (stable).. same problem.
Edit 2: After starting and then stopping X this problem happens in the framebuffer too.. hmmm (It doesn't happen during boot time or during initial login, it's not a bad cable connection!)
Edit 3: The problem does not occur when using the VGA d-sub output, only when using the HDMI output
Edit 4: Here's my Xorg.0.log
[ 1826.112]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 1826.112] X Protocol Version 11, Revision 0
[ 1826.112] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 1826.112] Current Operating System: Linux htpc 3.9.9-1-ARCH #1 SMP PREEMPT Wed Jul 3 22:45:16 CEST 2013 x86_64
[ 1826.112] Kernel command line: initrd=\initramfs-linux.img root=UUID=03f6bfa4-7815-4841-8386-5545dfa4cd33 ro loglevel=0 nomodeset
[ 1826.112] Build Date: 01 July 2013 10:48:42AM
[ 1826.112]
[ 1826.113] Current version of pixman: 0.30.0
[ 1826.113] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1826.113] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1826.113] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 22 08:39:14 2013
[ 1826.113] (==) Using config file: "/etc/X11/xorg.conf"
[ 1826.113] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1826.113] (==) ServerLayout "aticonfig Layout"
[ 1826.113] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 1826.113] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 1826.114] (**) | |-->Device "aticonfig-Device[0]-0"
[ 1826.114] (==) Automatically adding devices
[ 1826.114] (==) Automatically enabling devices
[ 1826.114] (==) Automatically adding GPU devices
[ 1826.114] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1826.114] Entry deleted from font path.
[ 1826.114] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1826.114] Entry deleted from font path.
[ 1826.114] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1826.114] Entry deleted from font path.
[ 1826.114] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1826.114] Entry deleted from font path.
[ 1826.114] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1826.114] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1826.114] Entry deleted from font path.
[ 1826.114] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1826.114] (==) FontPath set to:
/usr/share/fonts/misc/
[ 1826.114] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1826.114] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1826.114] (II) Loader magic: 0x7fdc20
[ 1826.114] (II) Module ABI versions:
[ 1826.114] X.Org ANSI C Emulation: 0.4
[ 1826.114] X.Org Video Driver: 14.1
[ 1826.114] X.Org XInput driver : 19.1
[ 1826.114] X.Org Server Extension : 7.0
[ 1826.117] (--) PCI:*(0:0:1:0) 1002:964a:1565:1707 rev 0, Mem @ 0xc0000000/268435456, 0xfef00000/262144, I/O @ 0x0000f000/256
[ 1826.117] Initializing built-in extension Generic Event Extension
[ 1826.117] Initializing built-in extension SHAPE
[ 1826.117] Initializing built-in extension MIT-SHM
[ 1826.117] Initializing built-in extension XInputExtension
[ 1826.117] Initializing built-in extension XTEST
[ 1826.117] Initializing built-in extension BIG-REQUESTS
[ 1826.117] Initializing built-in extension SYNC
[ 1826.117] Initializing built-in extension XKEYBOARD
[ 1826.117] Initializing built-in extension XC-MISC
[ 1826.117] Initializing built-in extension SECURITY
[ 1826.117] Initializing built-in extension XINERAMA
[ 1826.117] Initializing built-in extension XFIXES
[ 1826.117] Initializing built-in extension RENDER
[ 1826.117] Initializing built-in extension RANDR
[ 1826.117] Initializing built-in extension COMPOSITE
[ 1826.117] Initializing built-in extension DAMAGE
[ 1826.117] Initializing built-in extension MIT-SCREEN-SAVER
[ 1826.117] Initializing built-in extension DOUBLE-BUFFER
[ 1826.117] Initializing built-in extension RECORD
[ 1826.117] Initializing built-in extension DPMS
[ 1826.117] Initializing built-in extension X-Resource
[ 1826.117] Initializing built-in extension XVideo
[ 1826.117] Initializing built-in extension XVideo-MotionCompensation
[ 1826.117] Initializing built-in extension XFree86-VidModeExtension
[ 1826.117] Initializing built-in extension XFree86-DGA
[ 1826.117] Initializing built-in extension XFree86-DRI
[ 1826.117] Initializing built-in extension DRI2
[ 1826.117] (II) "glx" will be loaded by default.
[ 1826.117] (II) LoadModule: "glx"
[ 1826.117] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1826.117] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 1826.117] compiled for 6.9.0, module version = 1.0.0
[ 1826.118] Loading extension GLX
[ 1826.118] (II) LoadModule: "fglrx"
[ 1826.118] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[ 1826.134] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 1826.134] compiled for 1.4.99.906, module version = 13.10.10
[ 1826.134] Module class: X.Org Video Driver
[ 1826.134] (II) Loading sub module "fglrxdrm"
[ 1826.134] (II) LoadModule: "fglrxdrm"
[ 1826.134] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 1826.134] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 1826.134] compiled for 1.4.99.906, module version = 13.10.10
[ 1826.134] (II) AMD Proprietary Linux Driver Version Identifier:13.10.10
[ 1826.134] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-13.101
[ 1826.134] (II) AMD Proprietary Linux Driver Build Date: May 23 2013 15:49:35
[ 1826.134] (++) using VT number 4
[ 1826.136] (WW) Falling back to old probe method for fglrx
[ 1826.150] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 1826.154] ukiDynamicMajor: found major device number 250
[ 1826.154] ukiDynamicMajor: found major device number 250
[ 1826.154] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1826.154] ukiOpenDevice: node name is /dev/ati/card0
[ 1826.154] ukiOpenDevice: open result is 9, (OK)
[ 1826.154] ukiOpenByBusid: ukiOpenMinor returns 9
[ 1826.154] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 1826.156] (--) Chipset Supported AMD Graphics Processor (0x964A) found
[ 1826.156] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 1826.156] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 1826.156] (II) AMD Video driver is signed
[ 1826.157] (II) fglrx(0): pEnt->device->identifier=0xcf8900
[ 1826.157] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 1826.157] (II) Loading sub module "vgahw"
[ 1826.157] (II) LoadModule: "vgahw"
[ 1826.157] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 1826.157] (II) Module vgahw: vendor="X.Org Foundation"
[ 1826.157] compiled for 1.14.2, module version = 0.1.0
[ 1826.157] ABI class: X.Org Video Driver, version 14.1
[ 1826.158] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 1826.158] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 1826.158] (==) fglrx(0): Default visual is TrueColor
[ 1826.158] (**) fglrx(0): Option "DPMS" "true"
[ 1826.158] (==) fglrx(0): RGB weight 888
[ 1826.158] (II) fglrx(0): Using 8 bits per RGB
[ 1826.158] (==) fglrx(0): Buffer Tiling is ON
[ 1826.158] (II) Loading sub module "fglrxdrm"
[ 1826.158] (II) LoadModule: "fglrxdrm"
[ 1826.158] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[ 1826.158] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 1826.158] compiled for 1.4.99.906, module version = 13.10.10
[ 1826.161] ukiDynamicMajor: found major device number 250
[ 1826.162] ukiDynamicMajor: found major device number 250
[ 1826.162] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1826.162] ukiOpenDevice: node name is /dev/ati/card0
[ 1826.162] ukiOpenDevice: open result is 12, (OK)
[ 1826.162] ukiOpenByBusid: ukiOpenMinor returns 12
[ 1826.162] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 1826.162] (**) fglrx(0): NoAccel = NO
[ 1826.162] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 1826.162] (--) fglrx(0): Chipset: "AMD Radeon HD 6530D" (Chipset = 0x964a)
[ 1826.162] (--) fglrx(0): (PciSubVendor = 0x1565, PciSubDevice = 0x1707)
[ 1826.162] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 1826.162] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[ 1826.162] (--) fglrx(0): MMIO registers at 0xfef00000
[ 1826.162] (--) fglrx(0): I/O port at 0x0000f000
[ 1826.162] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 1826.163] (II) fglrx(0): AC Adapter is used
[ 1826.163] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 1826.163] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 1826.163] (II) fglrx(0): PCIE card detected
[ 1826.163] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 1826.163] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 1826.163] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 1826.163] (II) fglrx(0): RandR 1.2 support is enabled!
[ 1826.163] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 1826.163] (==) fglrx(0): Center Mode is disabled
[ 1826.163] (II) Loading sub module "fb"
[ 1826.163] (II) LoadModule: "fb"
[ 1826.163] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1826.164] (II) Module fb: vendor="X.Org Foundation"
[ 1826.164] compiled for 1.14.2, module version = 1.0.0
[ 1826.164] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1826.164] (II) Loading sub module "ddc"
[ 1826.164] (II) LoadModule: "ddc"
[ 1826.164] (II) Module "ddc" already built-in
[ 1826.293] (II) fglrx(0): Output DFP1 using monitor section aticonfig-Monitor[0]-0
[ 1826.293] (II) fglrx(0): Output CRT1 has no monitor section
[ 1826.293] (II) Loading sub module "ddc"
[ 1826.293] (II) LoadModule: "ddc"
[ 1826.293] (II) Module "ddc" already built-in
[ 1826.293] (II) fglrx(0): Connected Display0: DFP1
[ 1826.293] (II) fglrx(0): Display0: Failed to get EDID information.
[ 1826.294] (II) fglrx(0): EDID for output DFP1
[ 1826.294] (II) fglrx(0): Manufacturer: EXP Model: 901 Serial#: 1
[ 1826.294] (II) fglrx(0): Year: 2004 Week: 0
[ 1826.294] (II) fglrx(0): EDID Version: 1.3
[ 1826.294] (II) fglrx(0): Digital Display Input
[ 1826.294] (II) fglrx(0): Max Image Size [cm]: horiz.: 115 vert.: 65
[ 1826.294] (II) fglrx(0): Gamma: 2.20
[ 1826.294] (II) fglrx(0): DPMS capabilities: Off
[ 1826.294] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1826.294] (II) fglrx(0): First detailed timing is preferred mode
[ 1826.294] (II) fglrx(0): redX: 0.618 redY: 0.351 greenX: 0.280 greenY: 0.605
[ 1826.294] (II) fglrx(0): blueX: 0.152 blueY: 0.063 whiteX: 0.312 whiteY: 0.329
[ 1826.294] (II) fglrx(0): Supported established timings:
[ 1826.294] (II) fglrx(0): 640x480@60Hz
[ 1826.294] (II) fglrx(0): 800x600@60Hz
[ 1826.294] (II) fglrx(0): 1024x768@60Hz
[ 1826.294] (II) fglrx(0): Manufacturer's mask: 0
[ 1826.294] (II) fglrx(0): Supported detailed timing:
[ 1826.294] (II) fglrx(0): clock: 74.2 MHz Image Size: 16 x 9 mm
[ 1826.294] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 1826.294] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 1826.294] (II) fglrx(0): Supported detailed timing:
[ 1826.294] (II) fglrx(0): clock: 27.0 MHz Image Size: 4 x 3 mm
[ 1826.294] (II) fglrx(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 1826.294] (II) fglrx(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 1826.294] (II) fglrx(0): Monitor name: EP-HDMI-RX
[ 1826.294] (II) fglrx(0): Ranges: V min: 59 V max: 61 Hz, H min: 15 H max: 46 kHz, PixClock max 85 MHz
[ 1826.294] (II) fglrx(0): Supported detailed timing:
[ 1826.294] (II) fglrx(0): clock: 74.2 MHz Image Size: 16 x 9 mm
[ 1826.294] (II) fglrx(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 1826.294] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 1826.294] (II) fglrx(0): Supported detailed timing:
[ 1826.294] (II) fglrx(0): clock: 74.2 MHz Image Size: 16 x 9 mm
[ 1826.294] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1826.294] (II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 1826.294] (II) fglrx(0): Supported detailed timing:
[ 1826.294] (II) fglrx(0): clock: 74.2 MHz Image Size: 16 x 9 mm
[ 1826.294] (II) fglrx(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 1826.294] (II) fglrx(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 1826.294] (II) fglrx(0): Supported detailed timing:
[ 1826.294] (II) fglrx(0): clock: 74.2 MHz Image Size: 16 x 9 mm
[ 1826.294] (II) fglrx(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 1826.294] (II) fglrx(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 1826.294] (II) fglrx(0): Number of EDID sections to follow: 1
[ 1826.294] (II) fglrx(0): EDID (in hex):
[ 1826.294] (II) fglrx(0): 00ffffffffffff001710010901000000
[ 1826.294] (II) fglrx(0): 000e0103807341782a7c119e59479b27
[ 1826.294] (II) fglrx(0): 10505421080001010101010101010101
[ 1826.294] (II) fglrx(0): 010101010101011d007251d01e206e28
[ 1826.294] (II) fglrx(0): 550010090000001e8c0ad08a20e02d10
[ 1826.294] (II) fglrx(0): 103e9600040300000018000000fc0045
[ 1826.294] (II) fglrx(0): 502d48444d492d52580a2020000000fd
[ 1826.294] (II) fglrx(0): 003b3d0f2e08000a20202020202001ab
[ 1826.294] (II) fglrx(0): EDID vendor "EXP", prod id 2305
[ 1826.294] (II) fglrx(0): Using EDID range info for horizontal sync
[ 1826.294] (II) fglrx(0): Using EDID range info for vertical refresh
[ 1826.294] (II) fglrx(0): Printing DDC gathered Modelines:
[ 1826.294] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz eP)
[ 1826.294] (II) fglrx(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 1826.294] (II) fglrx(0): Printing probed modes for output DFP1
[ 1826.294] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz eP)
[ 1826.294] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1920x1080"x60.0 74.25 1920 2008 2052 2200 1080 1085 1095 1125 interlace +hsync +vsync (33.8 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1920x1080"x50.0 74.25 1920 2448 2492 2640 1080 1085 1095 1125 interlace +hsync +vsync (28.1 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1920x1080"x59.9 74.18 1920 2008 2052 2200 1080 1085 1095 1125 interlace +hsync +vsync (33.7 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1776x1000"x59.9 148.35 1776 1864 1908 2200 1000 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
[ 1826.294] (II) fglrx(0): Modeline "1776x1000"x50.0 74.25 1776 2304 2348 2640 1000 1005 1015 1125 interlace +hsync +vsync (28.1 kHz ez)
[ 1826.294] (II) fglrx(0): Modeline "1776x1000"x59.9 74.18 1776 1864 1908 2200 1000 1005 1015 1125 interlace +hsync +vsync (33.7 kHz ez)
[ 1826.294] (II) fglrx(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1680x1050"x59.9 148.35 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1400x1050"x60.0 148.50 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1400x1050"x59.9 148.35 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 1826.294] (II) fglrx(0): Modeline "1600x900"x59.9 148.35 1600 1864 1908 2200 900 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
[ 1826.294] (II) fglrx(0): Modeline "1280x1024"x60.0 148.50 1280 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "1280x1024"x59.9 148.35 1280 2008 2052 2200 1024 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "1440x900"x59.9 148.35 1440 1864 1908 2200 900 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
[ 1826.295] (II) fglrx(0): Modeline "1280x960"x59.9 148.35 1280 1864 1908 2200 960 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
[ 1826.295] (II) fglrx(0): Modeline "1280x768"x59.9 148.35 1280 1864 1908 2200 768 1004 1009 1125 +hsync +vsync (67.4 kHz ez)
[ 1826.295] (II) fglrx(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "1152x648"x50.0 74.25 1152 1592 1632 1980 648 653 658 750 +hsync +vsync (37.5 kHz ez)
[ 1826.295] (II) fglrx(0): Modeline "1152x648"x59.9 74.18 1152 1262 1302 1650 648 653 658 750 +hsync +vsync (45.0 kHz ez)
[ 1826.295] (II) fglrx(0): Modeline "800x600"x50.0 74.25 800 1720 1760 1980 600 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "720x480"x50.0 74.25 720 1720 1760 1980 480 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "640x480"x50.0 74.25 640 1720 1760 1980 480 725 730 750 +hsync +vsync (37.5 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1826.295] (II) fglrx(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1826.295] (II) fglrx(0): EDID for output CRT1
[ 1826.295] (II) fglrx(0): Output DFP1 connected
[ 1826.295] (II) fglrx(0): Output CRT1 disconnected
[ 1826.295] (II) fglrx(0): Using exact sizes for initial modes
[ 1826.295] (II) fglrx(0): Output DFP1 using initial mode 1280x720
[ 1826.295] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1826.295] (II) fglrx(0): Display dimensions: (1150, 650) mm
[ 1826.295] (II) fglrx(0): DPI set to (28, 28)
[ 1826.295] (II) fglrx(0): Adapter AMD Radeon HD 6530D has 2 configurable heads and 1 displays connected.
[ 1826.295] (==) fglrx(0): PseudoColor visuals disabled
[ 1826.295] (II) Loading sub module "ramdac"
[ 1826.295] (II) LoadModule: "ramdac"
[ 1826.295] (II) Module "ramdac" already built-in
[ 1826.295] (==) fglrx(0): NoDRI = NO
[ 1826.295] (==) fglrx(0): Capabilities: 0x00000000
[ 1826.295] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 1826.295] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 1826.295] (==) fglrx(0): UseFastTLS=0
[ 1826.295] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[ 1826.295] (--) Depth 24 pixmap format is 32 bpp
[ 1826.295] Loading extension ATIFGLRXDRI
[ 1826.295] (II) fglrx(0): doing swlDriScreenInit
[ 1826.295] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 1826.295] ukiDynamicMajor: found major device number 250
[ 1826.295] ukiDynamicMajor: found major device number 250
[ 1826.295] ukiDynamicMajor: found major device number 250
[ 1826.295] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 1826.295] ukiOpenDevice: node name is /dev/ati/card0
[ 1826.295] ukiOpenDevice: open result is 13, (OK)
[ 1826.295] ukiOpenByBusid: ukiOpenMinor returns 13
[ 1826.295] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 1826.295] (II) fglrx(0): [uki] DRM interface version 1.0
[ 1826.295] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:0:1:0"
[ 1826.295] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x7a000
[ 1826.295] (II) fglrx(0): [uki] mapped SAREA 0x7a000 to 0x7ff504c21000
[ 1826.295] (II) fglrx(0): [uki] framebuffer handle = 0x7b000
[ 1826.295] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 1826.295] (II) fglrx(0): swlDriScreenInit done
[ 1826.295] (II) fglrx(0): Kernel Module Version Information:
[ 1826.295] (II) fglrx(0): Name: fglrx
[ 1826.295] (II) fglrx(0): Version: 13.10.10
[ 1826.295] (II) fglrx(0): Date: May 23 2013
[ 1826.295] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 1826.296] (II) fglrx(0): Kernel Module version matches driver.
[ 1826.296] (II) fglrx(0): Kernel Module Build Time Information:
[ 1826.296] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.9.9-1-ARCH
[ 1826.296] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 1826.296] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 1826.296] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 1826.296] (II) fglrx(0): [uki] register handle = 0x0007c000
[ 1826.296] (II) fglrx(0): DRI initialization successfull
[ 1826.296] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x0102c000
[ 1826.297] (==) fglrx(0): Backing store disabled
[ 1826.297] Loading extension FGLRXEXTENSION
[ 1826.297] (**) fglrx(0): DPMS enabled
[ 1826.297] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 1826.297] (**) fglrx(0): Textured Video is enabled.
[ 1826.297] (II) LoadModule: "glesx"
[ 1826.297] (II) Loading /usr/lib/xorg/modules/glesx.so
[ 1826.298] (II) Module glesx: vendor="X.Org Foundation"
[ 1826.298] compiled for 1.4.99.906, module version = 1.0.0
[ 1826.298] Loading extension GLESX
[ 1826.298] (II) fglrx(0): GLESX enableFlags = 592
[ 1826.298] (II) fglrx(0): GLESX is enabled
[ 1826.298] (II) LoadModule: "amdxmm"
[ 1826.298] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[ 1826.298] (II) Module amdxmm: vendor="X.Org Foundation"
[ 1826.298] compiled for 1.4.99.906, module version = 2.0.0
[ 1826.324] Loading extension AMDXVOPL
[ 1826.324] Loading extension AMDXVBA
[ 1826.324] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 1826.326] (II) fglrx(0): Enable composite support successfully
[ 1826.326] (WW) fglrx(0): Option "VendorName" is not used
[ 1826.326] (WW) fglrx(0): Option "ModelName" is not used
[ 1826.326] (II) fglrx(0): X context handle = 0x4
[ 1826.326] (II) fglrx(0): [DRI] installation complete
[ 1826.326] (==) fglrx(0): Silken mouse enabled
[ 1826.326] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 1826.327] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
Last edited by EvanPurkhiser (2013-07-22 13:14:56)This was fixed by changing the "Pixel Format" in the catalyst control center to "RGB (Full RGB)".. Somehow it got changed to "YcBcr".
I removed the /etc/ati/amdpcsdb file that the fglrx driver likes to put settings in and did a fresh reinstall of catalyst-test and everything looks good now. Really no idea how the pixel profile got changed. Also noticed that my resolution was much lower than it should have been (which for some reason doesn't affect XBMC which runs in native resolution no matter what?), but that was an easy fix of adding Mode "1920x1080" to my Display section in xorg. -
Firefox (3.6.10) opens websites when hard wired to router, but when using wireless I get message: SERVER NOT FOUND FIREFOX CAN'T FIND THE SERVER AT SEARCH.AVG.COM. My homepage is http://www.google.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official. My anti-virus is AVG free 8.5.448. What can cause this?
If Work Offline is checked in Firefox File, I can get to Google search site. When I un-check it I still get the Server Not Found messageDid you check the connection settings?
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can -
I upgraded to Lion and then all video clips on for instance Youtube freeze every tenth second to buffer more data. I have a MacBook Pro and never had any problems when using Snow Leopard. Has Lion problems with this?
Ulf, SwedenUse the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
My apple Tv has audio problems when streaming from my NAS server.
My Apple TV has audio problems when streaming from my NAS server or computer and even internet. I can hear the click sound it makes when you click on the icons, but when the movie starts there is no audio. This even happens when using XBMC. I have HMDI directly to my TV suing Apple TV 2. I have tried resetting, turning off both TV and Apple TV, and changing the HDMI cable. It is driving me nuts.
XMBC requires a hack, we cannot help with hacked devices.
-
Hi all, I bought one iphone and 3 ipads, i set up all on one apple ID. Now i have a problem when using messages: when sending message from one device it appears again on screen from the other 3 devices. I need help on how to set up messages on each device separately and to start using messages app on each device independently. Thanks
search google for "iphone remove picture from contact"
-
Problem when using About Operator in Contains Query
Hi,
I'm new to Oracle and this forums too. I have a problem when using about operator in contains query.
I create a table with some records and then create a context index on 'name' column.
CREATE TABLE my_items (
id NUMBER(10) NOT NULL,
name VARCHAR2(200) NOT NULL,
description VARCHAR2(4000) NOT NULL,
price NUMBER(7,2) NOT NULL
ALTER TABLE my_items ADD (
CONSTRAINT my_items_pk PRIMARY KEY (id)
CREATE SEQUENCE my_items_seq;
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Car', 'Car description', 1);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Train', 'Train description', 2);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'Japan', 'Japan description', 3);
INSERT INTO my_items VALUES(my_items_seq.nextval, 'China', 'China description', 4);
COMMIT;
EXEC ctx_ddl.create_preference('english_lexer','basic_lexer');
EXEC ctx_ddl.set_attribute('english_lexer','index_themes','yes');
EXEC ctx_ddl.set_attribute('english_lexer','theme_language','english');
CREATE INDEX my_items_name_idx ON my_items(name) INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer english_lexer');
EXEC ctx_ddl.sync_index('my_items_name_idx');Then I perform contains query to retrieve record :
SELECT count(*) FROM my_items WHERE contains(name, 'Japan', 1) > 0;
COUNT(*)
1
SELECT count(*) FROM my_items WHERE contains(name, 'about(Japan)', 1) > 0;
COUNT(*)
1But the problem is when I using ABOUT operator like in Oracle's English Knowledge Base Category Hierarchy it return 0
SELECT count(*) FROM my_items WHERE contains(name, 'about(Asia)', 1) > 0;
COUNT(*)
0
SELECT count(*) FROM my_items WHERE contains(name, 'about(transportation)', 1) > 0;
COUNT(*)
0I can't figure out what 's wrong in my query or in my index.
Any help will be appreciated.
Thanks,
Hieu Nguyen
Edited by: user2944391 on Jul 10, 2009 3:25 AMHello (and welcome),
You'd be best asking this question in the Oracle Text forum, here:
Text
And by the way, it will help others to analyse if you put {noformat}{noformat} (lowercase code in curly brackets) before and after your code snippets.
Good luck!
Maybe you are looking for
-
Scanning problem with HP Deskjet 3050A - only scans about a quarter of the page
My HP Deskjet 3050A wirelessly prints just fine with my Mac Lion OS 10.7.3. But whenever I scan something, the resulting scan captures only about a quarter of the page, which is blown up in size to take up the entire page. (And I'm scanning regular 8
-
How much electricity does a Macbook Air use?
I'm moving out and living on my own for the first time. It'll also be the first time I have to pay utility bills. I was wondering how much electricty a Macbook Air (2011) uses during use, sleep, and charging. I'm a college student so I don't have a l
-
How do I download pictures from a disk to iPhotos on my MacBook Pro?
I am working on an album for a friend whom sent me a disk of photos. How do I download pictures from the disk to my iPhotos so I can then pick and choose which ones to print? Thanks! Cyndy
-
I have firefox 5, but now I can not enter a certain website. I would like to reset to firefox 4. Where can I find firefox 4?
-
Hi all, I have a scenario like Geo TIM ACC US JAn A 100 US FEb A 500 US JAN C 50 US FEB C 20 UK JAN A 1000 UK FEB A 2000 Uk JAN C missing UK FEB C missing when we are missing the combination of above i have to take US combination value according to M