Windows 8.1 pro 64bit shutdown problems!!!

hello:
I assembled a new computer with following hardware:
gigabyte x99 gaming g1.
intel 5960X
64gb ram
2 gigabyte gtx 980 gaming in SLI.
after setup windows 8.1 pro 64bit and after several restarts due to installation of MB drivers&software, graphic card drivers, windows update,....finally when trying to shut down windows, it gives the shut down screen then blank screen then loading desktop
again!!! sounds like log off and log on again!!! also when pressing power button on computer to shut down the same thing happens again!!!
I formatted the hard drive and reinstall windows 8.1 pro 64bit again, and without installing any drivers and updates, windows wont shutdown and the same scenario happens again!!!
I disabled the fast start-up option in power option in system in control panel and the computer shutdown this time!!! but the computer takes so long to start windows until hard drive lamp went off.
is there a solution to this!!!!

You may try the followings:
1,Boot in to Safe Mode and recheck the issue.
2. You may try a Clean Boot.
3. Look at the Event Viewer to find any clue related to this problem.
4.Enable Display highly detailed status messages.
To do this in the Start Search type in: gpedit.msc and hit the Enter Key.
Navigate to Computer Configuration > Administrative Templates > System. In the right pane locate
Display highly detailed status messages.If you enable this policy setting, the system displays status messages that reflect each step in the process of starting, shutting down, logging on, or logging off the system
5. Enable The Shutdown Event Tracker to consistently track the reason for system shutdowns
To do this in the Start Search type in: gpedit.msc and hit the Enter Key.
Navigate to Computer Configuration > Administrative Templates > System. In the right pane locate
Display Shutdown Event Tracker and enable it.
You must update all the drivers.
S.Sengupta, Windows Experience MVP

Similar Messages

Wifi network limited in windows 8.1 pro 64bit

Hi recently I setup my laptop and I setup windows 8.1 pro 64bit.but when I connect wifi or broadband network it show network limited and not access internet.then I setup my laptop again.but it still this problem.please help me.I don't use internet few
days.my laptop is dell i3 3rd genaration.inspiron 14.please help me...

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

XB270H DRIVER in Windows 8.1 Pro 64Bit Not Digitally assigned Will Not Load

The drivers available that ACER have released are not being recognised by my system because the closest driver Windows 8 64Bit is not Digitally Assigned. So the Windows 8.1 Pro 64Bit sees the monitor as a GenericPnP only and so far have had no response to when a driver that is digitally assigned by microsoft will be made available by ACER. Anyone else found similar issues with this model and driver. As we all know windows 8 is automatically updated to 8.1 and is mandatory and i would of assumed the driver would be recognised. I know i can run in test mode for the driver to work but then that means i must remain in test mode otherwise driver is removed by windows and goes back to the GenericPnP driver.

Having an unsigned driver is unacceptable! Philips and Asus have their drivers digitally signed! So does BenQ! It is so easy to digitally sign a driver!
The work around is to always boot up in Windows to ignore digitally unsigned drivers?
The driver is also not loading on Windows 7 either. Unless you manually tell Windows to use the unsigned driver!
Next time I buy a monitor, I am going to visit the website and see if the drivers for the monitor are digitally signed!
Acer you definitely droppe the ball on this one! Oh and by the way, none of the drivers are digitally signed for the other Acewr g-sync monitors as well!
[edited to comply with guidelines]

Windows 7 home premium and windows 8.1 pro op network problem

I have two PC-s, one is with windows 7 home premium and the other one with windows 8.1 pro op system. They are wired via ethernet/ home network. Till I had old Windows XP instead of Windows 7, the two PC-s were connected,
file sharing and device sharing was easy and functioning.
Today it doesn't, windows 8.1 finds the other PC and creating the network, even identifying the different folders on the other PC however as I want to open a file, then loading forever starts, but
on the other side the windows 7 PC is frozen, only the hard switch off helps. ...
Any idea what to do? The diagnose shows that the access was lost.

Here is the forum for you

Windows 8.1 PRO 64Bit double startup problem

I solved this problem by removed file nvspcap64.dll v.16.18.9.0

You may try the followings:
1,Boot in to Safe Mode and recheck the issue.
2. You may try a Clean Boot.
3. Look at the Event Viewer to find any clue related to this problem.
4.Enable Display highly detailed status messages.
To do this in the Start Search type in: gpedit.msc and hit the Enter Key.
Navigate to Computer Configuration > Administrative Templates > System. In the right pane locate
Display highly detailed status messages.If you enable this policy setting, the system displays status messages that reflect each step in the process of starting, shutting down, logging on, or logging off the system
5. Enable The Shutdown Event Tracker to consistently track the reason for system shutdowns
To do this in the Start Search type in: gpedit.msc and hit the Enter Key.
Navigate to Computer Configuration > Administrative Templates > System. In the right pane locate
Display Shutdown Event Tracker and enable it.
You must update all the drivers.
S.Sengupta, Windows Experience MVP

Running Windows on MacBook Pro - running into problems

I installed Windows XP on my MacBook Pro (Late 2008 model) and everything seems to be running fine. I installed all of my drivers with no problem. Windows is installed on a 31GB partition.
I installed Windows for one reason and one reason only - to print W-2s at my job. There is a small program I need to install, and it comes on a disc that is compatible with Windows XP, Windows Vista and Windows 7.
Whenever I go to install the program, I insert the disc into the drive and it just makes a noise like it is trying to load and then spits the disc back out.
I thought maybe it was just this program, but it's not - it does it with any disc I try to put in.
Is this a fixable problem? Can I even run PC discs on my Mac (with Windows)?
I'm pretty new to this whole thing so any insight would be appreciated!

Yes you can install Windows programs from a disk when you are booted into Windows.
31GB partition for Windows is very small. Maybe there is not enough space in the Windows partition for the programs you are trying to install. How much free space is there in the Windows partition and how large are the programs? Remember that Windows needs some free space just to run, just as OSx needs free HD space for it to run.
If you installed using Boot Camp Assistant, you should vist the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

Hp f2280 and Windows 8.1 pro 64bit

Hello,
I need help with my printer,
I ve recently upgraded my OS to Win 8.1 from Vista, after upgrade i' ve installed drivers from hp official website and now it begins to be weird, my pc set my printer f2280 as default etc. everything looks fine on the paper, but i am not able to even print test page. I' ve even used "Hp prind and scan doctor" by which i was able to print some weird test page but Doc said that it is driver problem, so i've uninstalled my drivers and downloaded them once more and installed them. Still cannot print, doc says the same thing. I've done it like 4 times.
Please what shall i do to make my printer work.
-Robert

Hi @Robert_Helpme
I would like to help you with the difficulties you are having with the software/ driver. Please complete the following steps and let me know the outcome;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Download the software and choose to save as, save to desktop > DJ_AIO_03_F2200_NonNet_Full_Win_WW_140_404-4.exe
After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Perform a clean boot > How to perform a clean boot in Windows
Download the following SP40669 File Download - if this does not download and or install please proceed to the next step.
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
Image source
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Please let me know the outcome of these efforts.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Windows 7 home premium 64bit installation problem

HI, all,
I installed oracle 11g r2 enterprise version database on windows 7 home premium laptop, everything looks fine after installation, but whenever I restart the computer or relogin to the computer, the screen is only back. Could anyone tell me what is the problem and how to solve it, thanks!
Tried to restore the comupter, reinstall oracle database several times, same problem.

user11017933 wrote:
HI, all,
I installed oracle 11g r2 enterprise version database on windows 7 home premium laptop, everything looks fine after installation, but whenever I restart the computer or relogin to the computer, the screen is only back. Could anyone tell me what is the problem and how to solve it, thanks!
Tried to restore the comupter, reinstall oracle database several times, same problem.Home versions of Windows are not supported/certified - so things may or may not work as advertised.
http://download.oracle.com/docs/cd/E11882_01/install.112/e16773/reqs.htm#CHDHGGFE
Srini

Windows 8.1 Pro SMB Sharing problem

Hi,
Would love some help.
I have a file server that I recently upgraded from Windows 8 to Windows 8.1. Problem is, it broke my smb share to 2 Dune Media players and another PC running XBMC on the Openelec platform. I have spent days scouring forums for information and tried
every reg hack and security/sharing fix I found but to no avail. I have since refreshed windows 8.1. I did however just have a breakthrough.
The problem is that the 3 devices above all worked great before the update, now I'm getting errors when ever I try to access a file on the smb share. On my Windows 8.1 file server I have am running storage spaces with about 8 discs amounting to about
16TB of storage, plus an SSD with the operating system. What I just discovered is that if I share a folder on the C drive, it can be scanned and accessed from any of the media players. Therefore it's only the 'storage space' drive that won't authenticate
an smb client.
Thanks
Allan Phillips

Thanks Alex, I had tried that a few times. Finally after 3 weeks I found the solution on the WD forum. Solution is as below.
Re: WD TV Live does not see shared windows USB drives that are connected via hub
Options
‎01-24-2014 12:46 PM
Well, nobody offered any opinion so far, but I was able to solve the mystery.
It is all about the old IPRStackSize of the LanmanServer (Windows NT is greeting us again).
I was taken off, because access seemed basically to work (at least with Windows machines).
But the Windows 8.1 event log then told me very clearly : event 2011, irpstacksize not large enough, please increase.
This event occurred whenever I tried to access the shared drives from my Android devices or especially from the WD TV Live. The only difference netween these 2 systems was that on the Android devices I could at
least see the drives (but could not really open them), while the WD TV Live did not even boither to show me the drives.
Now, I have no clue about the actual limits for the IRPStackSize in Windows 8.1 (the values changed from Windows version to Windows version). So I finally used the limit I found for older Windows systems :
32 (x20).
And it works now like a chram as it seems.
By the way - I found stories about older Windows systems, where people increased the value to 20 (x14). So I tried that value first. With the result that I could not access any drive from other network units at
all. So, the default value for this in Windows 8.1 must be even higher than that. I don;t know what it is, but 32 (x20) is obviously higher.
Long story short : it is a Windows 8.1 (possibly already Windows 8) problem. And it can be solved by creating manually an entry in the Registry to add the IRPStackSize parameter with the higher value (as you know,
when this parameter is missing, Windows uses a default value, which is obviously too small for drives connected to a hub and accessed by any kind of Linux systems.
I still don't have a clue, why the access request by a Linux based system requires obviously more stack size than a request by a Windows machine. That is still something that makes me shake my head.
Here a little procedure copied from Windows NT solutions :
1. Run regedit.
2. Navigate to the following key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters
3. In the right pane, double-click the IRPStackSize value.
4. In the Value Data box, type a value that is larger than the value that is listed.
If you created the IRPStackSize value using the procedure described in step 4, the default value is 15. It is recommended that you increase the value by 3. Therefore, if the previous value was 11, type 14, and
then click OK.
5. Close the Registry Editor and restart the computer.
If the problem persists after you complete the preceding procedure, try to increase the value of IRPStackSize even more. The maximum value for Windows 2000 is 50 (0x32 hex).
NOTE: If the IRPStackSize value does not already exist, use the following procedure to create it:
a.
In the Parameters folder of the registry, right-click the right pane.
b.
Point to New, and then click DWord Value.
c.
Type IRPStackSize.
IMPORTANT: Type "IRPStackSize" exactly as it is displayed because the value name is case-sensitive.

Firefox 17.0.1 Crashes with "Script is busy or has stopped to work" under Win 8 Pro 64bit - no problem under Win Vista Ultimate 64 bit.

Firefox hangs and takes a few minutes to run again :( until next hangout :(((( Reinstalling didn't help.
My plugins:
Adobe Acrobat
Adobe PDF Plug-In For Firefox and Netscape 11.0.0 11.0.0.379 Aktuální
VLC Web Plugin
VLC media player Web Plugin 2.0.2 2.0.2.0 Aktuální
Shockwave Flash
Shockwave Flash 11.5 r502 11.5.502.135 Aktuální
Java Deployment Toolkit 7.0.100.18
NPRuntime Script Plug-in Library for Java(TM) Deploy 1.7.0.10 Aktuální
Java(TM) Platform SE 7 U10
Next Generation Java Plug-in 10.10.2 for Mozilla browsers 1.7.0.10 Aktuální
Microsoft Office 2010
The plug-in allows you to open and edit files using Microsoft Office applications Neznámý modul
NVIDIA 3D VISION
NVIDIA 3D Vision Streaming plugin for Mozilla browsers Neznámý modul Vyhledat
NVIDIA 3D Vision
NVIDIA 3D Vision plugin for Mozilla browsers Neznámý modul Vyhledat
iTunes Application Detector
iTunes Detector Plug-in Neznámý modul Vyhledat
Pando Web Plugin
Pando Web Plugin Neznámý modul Vyhledat
Google Update
Google Update
Any idea?
Thank you.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Pro Random Shutdown problem?

So we bought a 15" Pro and it has this odd problem of just randomly shutting down. The battery has power in it and most of the time it is plugged into the wall anyway. Sometimes music is playing or I am even actily using teh laptop and then it just shutts down and I have to reboot. I know I will have to take it in for repairs and/or replacement, but I was wondering if anyone else has heard of or experienced this problem and have any idea what would cause such an issue?

The problem you are describing could be a bad battery. You should check to see if your battery is part of the recall (https://support.apple.com/macbookpro15/batteryexchange/). If it is...there's your problem.
If it's not, it still could be the battery, but you should try resetting the PMU first (http://docs.info.apple.com/article.html?artnum=303319). If that doesn't work, call AppleCare and ask for a replacement battery...
Lots of folks on these boards have described similar experiences....try using the "Search Discussions" feature next time...

I am using Macbook pro 15" late 2013, Does my boot camp support Windows 8.1 Pro 64bit?

Same as topic.

Windows 8.1 is not yet supported. It may work or you may have the odd driver issue.

Word 2013/64bit Installed on Windows 8.1 pro 64bit

Hi everyone,
1. Error:
When I open Microsoft Word 2013 I get the window “Microsoft Visual
Basic for Applications”
Compile error in hidden module: NotOE.
This error commonly occurs when code is incompatible with the version, platform, or architecture of this application. Click “Help” for information on how correct this error.
After I click OK the window is gone.
2. Error:
When I open a new blank document another window pops up : “Microsoft Word” … The macro cannot be found or has been disabled because of your Macro security settings.
I click Ok and the word is working fine.
Any help will be greatly appreciated.
Thank you
Mario

Hi Mario,
Please try to start Word 2013 in safe mode and see if issue persists: Press Win + R and type "winword.exe /safe" in the blank box, then press Enter.
"Compile error in hidden module: NotOE" -
I'm not sure what exactly "NotOE" is, but it usually indicate a third party add-in, you might want to have a check.
Also, please browser to Word Startup folder and see if you have any similar .dot/.xla add-in template files. If yes, try to delete them, then verify result. The path of Word Startup folder can be found by going to FILE>Options>Advanced tab>click
File Locations... button under General section.
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Windows 8.1 Pro Shutdown / Sleep power still running

Windows 8.1 Pro cant Shutdown / Sleep .
i think is BIOS problem...
i want a flash BIOS tools
laptop model : v480 (20143)
BIOS: H1ET75WW (1.18)

Hi Sen92tsw,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your V480 Laptop is not Shutting Down/ Going to Sleep after installing Windows 8.1. Below is the link with troubleshooting steps which should resolve this issue.
Windows 8 and 8.1 Shutdown Issue
Do post us back if the issue persists
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Clean installation of windows 8.1 pro on Thinkpad e550 activation problems.

I have installed a SSD hard drive and need a clean instalations of windows for development using multiple platforms.
My plan was to have a tri-boot on three partitions on a mbr formated drive.
-Windows 8.1 Pro 64bit;
-WIndows 8.1 Pro 32bit, and;
-WIndows 7 Ultimate 64bit using downgrade rights.
The following steps were used:
1. Switching the hard drive and cloning the oem copy to the first partition;
2. Activate windows getting the OEM key from the system (so I had no hardware changes);
3.Use the anytime upgrade in the system properties to upgrade to pro;
4.Clone the windows 7 OS from the old PC and place in on a partion;
5.Download both install media for windows 8.1 Pro from MS Creating Install media;
6. Create media as detailed here;
7. Modify the install to allow entry of key after install as shown here because pro license and oem keys where not acepted during install;
8.Went to BIOS. Turned on Legacy and disable secure boot;
9.Install Windows 8.1 both versions, and;
10. Repair boot to load all three OS.
Good, Now I have all three OS installed all working. However, The pro product key will not activate the windows 8.1 pro and the oem key won't be acepted saying it is the wrong version of windows.
So called MS activation line and they say i need to contact the OEM for activation and downgrade keys for 7 even though i paid for the upgrade through the MS store and the product was already activated once on the system.
Questions:
1. How can i activate the Windows 8.1 pro via Lenovo?
2. How can I activate the Windows 7 copy under downgrade rights with Windows 8.1 pro?
3. Am i missing something with the UEFI/BIOS? (Note:I need to use mbr not GPT format on the drive.)
I have switch the UEFI mode/duel modes during install without success.

EvanTPE550 wrote:
"Is a Win 7 32 virtual client an option?"
What VC are you using?
I use VMWare Player (free) and use it to create virtual clients as needed. Typically the virtual clients are "clean installs" from ISOs. VMWare has it so well mechanized that there's not much to it.
It's pretty quick and easy to install Player and give it a try. Another advantage to that approach is that there's only a single OS at the top level and backups can capture the whole mess w/out having to deal with 2 or 3 different OSs and their partitions.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Windows 8.1 pro 64bit shutdown problems!!!

Similar Messages

Maybe you are looking for