XB270H DRIVER in Windows 8.1 Pro 64Bit Not Digitally assigned Will Not Load

The drivers available that ACER have released are not being recognised by my system because the closest driver Windows 8 64Bit is not Digitally Assigned. So the Windows 8.1 Pro 64Bit sees the monitor as a GenericPnP only and so far have had no response to when a driver that is digitally assigned by microsoft will be made available by ACER. Anyone else found similar issues with this model and driver. As we all know windows 8 is automatically updated to 8.1 and is mandatory and i would of assumed the driver would be recognised. I know i can run in test mode for the driver to work but then that means i must remain in test mode otherwise driver is removed by windows and goes back to the GenericPnP driver.

Having an unsigned driver is unacceptable! Philips and Asus have their drivers digitally signed! So does BenQ! It is so easy to digitally sign a driver!
The work around is to always boot up in Windows to ignore digitally unsigned drivers?
The driver is also not loading on Windows 7 either. Unless you manually tell Windows to use the unsigned driver!
Next time I buy a monitor, I am going to visit the website and see if the drivers for the monitor are digitally signed!
Acer you definitely droppe the ball on this one! Oh and by the way, none of the drivers are digitally signed for the other Acewr g-sync monitors as well!
[edited to comply with guidelines]

Similar Messages

My Windows (version 7 Pro, 64-bit) Media player will not play any of my stored music.

IT JUST STARTED PLAYING AGAIN...ONE OTHER REASON I HATE WINDOWS 7!!!!!!
It is up-to-date (ver 12) and when I test the speakers, I get the test sounds OK but, when I try to play any of my stored music (and I have vocals and instrumentals) no sound is forthcoming.
This problem has just occurred in the last 15 minutes. It was playing fine until I decided to change the music selection. Going back to the original selection does not work either.
As I stated, testing the speaker system using the sound icon in the Control Panel works fine even if I change the setting to another one.
It is possible that it will return to normal if I re-boot, but I'd rather find out why it quit working first.

IT JUST STARTED PLAYING AGAIN...ONE OTHER REASON I HATE WINDOWS 7!!!!!!
It is up-to-date (ver 12) and when I test the speakers, I get the test sounds OK but, when I try to play any of my stored music (and I have vocals and instrumentals) no sound is forthcoming.
This problem has just occurred in the last 15 minutes. It was playing fine until I decided to change the music selection. Going back to the original selection does not work either.
As I stated, testing the speaker system using the sound icon in the Control Panel works fine even if I change the setting to another one.
It is possible that it will return to normal if I re-boot, but I'd rather find out why it quit working first.

Windows 8.1 pro 64bit shutdown problems!!!

hello:
I assembled a new computer with following hardware:
gigabyte x99 gaming g1.
intel 5960X
64gb ram
2 gigabyte gtx 980 gaming in SLI.
after setup windows 8.1 pro 64bit and after several restarts due to installation of MB drivers&software, graphic card drivers, windows update,....finally when trying to shut down windows, it gives the shut down screen then blank screen then loading desktop
again!!! sounds like log off and log on again!!! also when pressing power button on computer to shut down the same thing happens again!!!
I formatted the hard drive and reinstall windows 8.1 pro 64bit again, and without installing any drivers and updates, windows wont shutdown and the same scenario happens again!!!
I disabled the fast start-up option in power option in system in control panel and the computer shutdown this time!!! but the computer takes so long to start windows until hard drive lamp went off.
is there a solution to this!!!!

You may try the followings:
1,Boot in to Safe Mode and recheck the issue.
2. You may try a Clean Boot.
3. Look at the Event Viewer to find any clue related to this problem.
4.Enable Display highly detailed status messages.
To do this in the Start Search type in: gpedit.msc and hit the Enter Key.
Navigate to Computer Configuration > Administrative Templates > System. In the right pane locate
Display highly detailed status messages.If you enable this policy setting, the system displays status messages that reflect each step in the process of starting, shutting down, logging on, or logging off the system
5. Enable The Shutdown Event Tracker to consistently track the reason for system shutdowns
To do this in the Start Search type in: gpedit.msc and hit the Enter Key.
Navigate to Computer Configuration > Administrative Templates > System. In the right pane locate
Display Shutdown Event Tracker and enable it.
You must update all the drivers.
S.Sengupta, Windows Experience MVP

Wifi network limited in windows 8.1 pro 64bit

Hi recently I setup my laptop and I setup windows 8.1 pro 64bit.but when I connect wifi or broadband network it show network limited and not access internet.then I setup my laptop again.but it still this problem.please help me.I don't use internet few
days.my laptop is dell i3 3rd genaration.inspiron 14.please help me...

Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the my new iPhone number is OS. Any ideas?

Just transferred data to iMac from working Mac Pro that is using Parallels and Windows 7 and the Biblesoft 5 and it will not open on the iMac the only change is the new Maverick OS from the macpro Lion OS. Any ideas?
<Personal Information Edited by Host>

Setup Assistant and Migration Assistant do not restore MS Windows, it only does the OS X partition. All of your Windows stuff must be backed up and restore using a MS Windows application. If no one on this forum is able to answer your question then I'd repost it on a Parallels forum to see how other Windows users approach this.

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion? Best, James.

I have a licensed copy of Adobe Acrobat X Pro for Windows. I recently switched over to MAC OS and would like to move my Adobe X Pro over but the CD will not work for Mac OS? Can anyone assist me with this conversion?
Best,
James.

you cannot use your pc license to install on a mac. you would need a separate license (and serial number) for that.
adobe allows platform swaps, but only with the latest (xi) version, Order product | Platform, language swap
your option to use acrobat on a mac are to upgrade to acrobat pro xi and change platforms, use a windows emulator (parallels/boot camp etc) on your mac or swap with a third party.

Just installed Windows 7 64 bit on a PC Encore will not come up

I have a Dell computer quad core with Vista home premium 32 bit.   I have been running Premiere Pro and Encore successfully and have made some great videos.
I recently installed Windows 7 64 bit. Premiere Pro runs fine but Encore will not come up. When the program gets to initialize transcoding it freezes and when I take a look at what is happening I see Encore is not responding. I have a hard time trying to end the program. I have run it as administrator and have started Windows with no start up programs.   Any suggestions would be appreciated. Thanks in advance
Will Moore

See if this helps
Fix Encore Win7 Problem http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Other than that, do a forum search for variations like...
Windows 7 64bit
or
win7 64bit
or just
64bit
MANY previous discussions of problems
Also...
Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm

Just bought pro with new os installed - will not let me run install disk for lexmark printer

just bought pro with new os installed - will not let me run install disk for lexmark printer?

Is that disc for Mac systems or Windows ?
I suggest you visit Lexmark web site and download and install drivers for your exact printer manually.

When i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when clicked

when i open finder the windown is a completely blank grey box with the title "Window" as a header, and all my folders will not open when c
the problem started when my computer screen broke from something falling on it, the screen was replaced but the people that fixed it for me told me there may be some hard disk issues when a problem like this happens, they ran their own checks and found nothing and i was given my laptop back, then when i tried to use it, i found this problem. everything else works fine.
i have shutdown and re-started my computer multiple times and i have also re-started finder multiple times, both having no effect
i have also done a few other things to find that my apple.com.finder.plist and apple.com.sidebar.plist are both missing, and are not re-creating themselves, i have found no way to bring them back either.
any help would be greatly appreciated, thanks

there is an app called daisydisk on mac app store which will help you see exactly where the memory is focused and consumed try using that app and see which folders are using more memory

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I bought 2 new memory card to 4 grams each - replace them in your MacBook Pro 13-inch but it will not turn on - If you are installing a card for 2 and one for 4 d all works - tell me what could be the problem

I assume that you have installed new RAM in your MBP.
It would be helpful if you indicated the EXACT model/year MBP that you have.
What the the RAM specifications that you are trying to install?
Ciao.

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

OS Windows Vista Ultimate - HP LAser Jet 1000 - Firefox will not print out internet page etc...

OS Windows Vista Ultimate - HP Laser Jet 1000 - Firefox will not print out internet page etc...
That simple, find an page you want to print, hit the print button and zero zip zlich.
Works just fine with IE?????

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searxhed evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason.

I have windows 7 64 bit but the new itunes will not install because it can't find itunes64.msi. I have searched evertwhere on my pc. In addition, I can't uninstall the itunes and reinstall for the same reason. I can't upgrade for my icloud account.

Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Adobe Digital Editions will not launch on my Windows 8.1 laptop

Adobe Digital Editions will not launch on my Windows 8.1 laptop
I have uninstalled and re-installed several times.
I have successfully used previous versions of ADE on this laptop in the past.

Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Adobe digital editions will not finish downloading ebook even after double clicking on hard drive .

ADE will not download and open the ebook automatially. After locating the .ascm (ebook) file on the hard drive and double clicking on that, it still will not open in ADE.

I did all that and after I close the ADE and double click on the file, ADE opens right up and it looks like it is downloading (very fast), but nothing shows up in the ADE.
How do I only get emails from you and not all the other people on the discussion?
Date: Fri, 23 Dec 2011 15:48:24 -0700
From: [email protected]
To: [email protected]
Subject: Adobe digital editions will not finish downloading ebook even after double clicking on hard drive .
    Re: Adobe digital editions will not finish downloading ebook even after double clicking on hard drive .
    created by Jeff A Wright in Adobe Digital Editions - View the full discussion
Right click on the ACSM file or option click and go to Open With and select Other. You can then navigate to your Adobe Digital Editions and set the file to open with that. I would then recommend closing Digital Editions, if you have it open, and try double clicking the file. If Adobe Digital Editions opens then the file association is still correct. If you continue to have difficulties then I would recommend contacting the vendor you obtained the e-book from.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4101791#4101791
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4101791#4101791. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Digital Editions by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

XB270H DRIVER in Windows 8.1 Pro 64Bit Not Digitally assigned Will Not Load

Similar Messages

Maybe you are looking for