Windows HPC - unable to shutdown nodes from Node Manager

I have a small Windows HPC Server 2008 R2 cluster that we purchased and asked for it to be a "Turn Key and Go" type deal, so we didn't configure it. The annoyance I am having is that I can't reboot or shutdown the compute nodes from the Node Management
window of the Head node. So when I need to do that, I have to remote desktop into each one (which for some reason take about 5 minutes from the head node,) and shut them down like that.
Does any one have ideas on where to start? I checked, all the firewalls have allowed File Sharing, which I saw some where needed to be on in order to do this.
When I ran "Shutdown-HpcNode" from HPCPowerShell, it gave me an error about bad username or password, so I think it might have some configuration problem.
(this was the first Windows HPC the vender had ever done, so their configuration settings might not have been perfect, but on the whole, this is a small problem to have.)
Thanks!

Hi,
Based on your description, this issue seems to be more related to Windows HPC Server 2008 R2. I suggest that
you should post this question in
Windows HPC Server Forum. I believe we will get a better assistance there.
There are some additional TechNet articles. These may be helpful.
Overview of Configuring the Head
Node for Failover with Windows HPC Server 2008 R2
Shutdown-HpcNode
Hope this helps.
Best regards,
Justin Gu

Similar Messages

  • Unable to view output from concurrent manager

    Hello all,
    I am unable to view output from concurrent manager, I am using IE 8 32bit on Windows 7 & adobe 10.0.1
    It gives a blank page
    We are trying to view an xml report
    EBS 11.5.10.2
    db : 10.2.0.
    linux 4 update 5
    I have already reffered below documents but for no luck
    Note: 888932.1 - R12.1 Unable To View Output For Xml Outputs - View Output Button - The window opens up And Disappear Automatically
    Note: 305850.1 - Unable To View Output Of PDF Report When Clicking ''View Output''
    Thanks.

    Is the issue with XML/PDF concurrent requests or with all requests?
    Can you find any errors in Apache/Database log files?
    Is the application listener up and running? Can you find any errors in the listener log file?
    Have you tried to run AutoConfig and bounce the services and see if this helps?
    Thanks,
    Hussein

  • Unable to start Node Manager

    Hello everyone,
    I've installed WLS 10.3.3 on windows. *2 Managed servers (jitu-pc, jitu-pc1) & 1 admin server on same machine*.
    Below are the SSL configurations for both:
    Host Name Verification = None
    Machine>Node Manager: Type=PLAIN
    When I try to start the node manager ($BEA_HOME\server\bin\startNodeManager.cmd" I get below error:
    <Oct 15, 2010 4:11:33 AM> <INFO> <Secure socket listener started on port 5556>
    Oct 15, 2010 4:11:33 AM weblogic.nodemanager.server.SSLListener run
    *INFO: Secure socket listener started on port 5556*
    <Oct 15, 2010 4:12:04 AM GMT+05:30> <Warning> <Security> <BEA-090476> <Invalid/unknown SSL header was received from peer 01HW165700.entcorp.ttsl.com - 172.17.43.84 during SSL handshake.>
    <Oct 15, 2010 4:12:04 AM GMT+05:30> <Warning> <Security> <BEA-090476> <Invalid/unknown SSL header was received from peer 01HW165700.entcorp.ttsl.com - 172.17.43.84 during SSL handshake.>
    <Oct 15, 2010 4:12:04 AM> <WARNING> <Uncaught exception in server handlerjavax.net.ssl.SSLHandshakeException: [Security:090476]Invalid/unknown SSL header was received from peer 01HW165700 - 172.17.43.84 during SSL handshake.>
    javax.net.ssl.SSLHandshakeException: [Security:090476]Invalid/unknown SSL header was received from peer 01HW165700 - 172.17.43.84 during SSL handshake.
    at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireException(Unknown Source)
    at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown Source)
    at com.certicom.tls.record.ReadHandler.fireAlert(Unknown Source)
    at com.certicom.tls.record.ReadHandler.getProtocolVersion(Unknown Source)
    at com.certicom.tls.record.ReadHandler.checkVersion(Unknown Source)
    at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
    at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
    at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
    at com.certicom.tls.record.ReadHandler.read(Unknown Source)
    at com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
    at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
    at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
    at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
    at java.io.InputStreamReader.read(InputStreamReader.java:167)
    at java.io.BufferedReader.fill(BufferedReader.java:136)
    at java.io.BufferedReader.readLine(BufferedReader.java:299)
    at java.io.BufferedReader.readLine(BufferedReader.java:362)
    at weblogic.nodemanager.server.Handler.run(Handler.java:70)
    at java.lang.Thread.run(Thread.java:619)
    Can anybody tell me what am I missing ?

    Thanks Jay,
    That worked.
    Also, I've one more doubt.
    I browsed to the $WEBLOGIC_HOME/common/nodemanager directory.
    From there I executed $WEBLOGIC_HOME/server/bin startNodeManager.cmd.
    But before starting there is no "nodemanager.properties" file.
    After I started node manager, it started with default properties, and wrote the same to "nodemanager.properties" file in the same directory I started the node manager from.
    Then I aborted the node manager, edited the property file for SecureListener and then restarted. Then everything went up and fine.
    My question is that is there any default "nodemanager.properties" ?

  • Unable to start node manager of WebLogic 12c on OEL 5.9 64 bit

    Hi,
    I have WLS 12 running on OEL 5.9 64 bit.
    The installation ise JDK  instead of the default JRockit.
    The version of Java that has been installed is from rpm: jdk-7u25-linux-x64.rpm
    I have created a domain.
    I am unable to start the Node Manager the first time, and thus unable to create the file nodemanager.properties.
    I get an error:
    weblogic.nodemanager.common.ConfigException: Native version is enabled but nodemanager native library could not be loaded
    I have added JAVA_USE_64BIT=true in the commEnv.sh, but it seems not to help.
    Does someone know how to get the nodde manager runing on a Linux x86 64 bit?
    Thanks by advance for any tip.

    Hello, try this:
    1. Set the environment to use the 64 bit WLS library:
    export LD_LIBRARY_PATH=
    /u01/Middleware/wlserver_10.3/server/native/linux/x86_64/:/u01/Middleware/wlserver_10.3/server/native/linux/i686/
    2. Retry the domain configuration:
    /u01/Middleware/Oracle_PFRD/bin/config.sh

  • Unable to initialize Node Manager on Weblogic 11g (10.3.5) Linux env..

    Hello,
    I worked earlier on Weblogic 8.1 and after a long gap I am coming back to Weblogic Server.
    And I tried to install & setup Weblogic Server 11g R1 (10.3.5). I successfully installed WL 11g on a Linux machine, configured the domain, and admin server without any problem. I created a managed server on the Console and tried to initialize the node manager to be able to start the managed server. I am getting the following error message repeatedly. And I did not select SSL connection, while setting up the environment.
    Can someone help me resolve this issue?
    <Sep 13, 2011 12:19:31 PM> <WARNING> <Uncaught exception in server handlerjavax.net.ssl.SSLHandshakeException: [Security:090476]Invalid/unknown SSL header was received from peer inb01.n2nservices.com - 192.168.112.46 during SSL handshake.>
    javax.net.ssl.SSLHandshakeException: [Security:090476]Invalid/unknown SSL header was received from peer inb01.n2nservices.com - 192.168.112.46 during SSL handshake.
    at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireException(Unknown Source)
    at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertSent(Unknown Source)
    at com.certicom.tls.record.ReadHandler.fireAlert(Unknown Source)
    at com.certicom.tls.record.ReadHandler.getProtocolVersion(Unknown Source)
    at com.certicom.tls.record.ReadHandler.checkVersion(Unknown Source)
    at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
    at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
    at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
    at com.certicom.tls.record.ReadHandler.read(Unknown Source)
    at com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
    at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:264)
    at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306)
    at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158)
    at java.io.InputStreamReader.read(InputStreamReader.java:167)
    at java.io.BufferedReader.fill(BufferedReader.java:136)
    at java.io.BufferedReader.readLine(BufferedReader.java:299)
    at java.io.BufferedReader.readLine(BufferedReader.java:362)
    at weblogic.nodemanager.server.Handler.run(Handler.java:71)
    at java.lang.Thread.run(Thread.java:662)
    Sep 13, 2011 12:19:31 PM weblogic.nodemanager.server.Handler run

    Can you see what listen address you have given to Node Manager in console or in config.xml?
    <machine xsi:type="unix-machineType">
    <name>Servername</name>
    <node-manager>
    <name>Servername</name>
    <listen-address>localhost</listen-address>
    </node-manager>
    </machine>
    Another way to start Managed server is to use startManaged.sh script.

  • Firefox stalls whenever in Yahoo e-mail; Windows XP unable to shutdown

    When I am in my Yahoo e-mail account, firefox stalls. The page does not budge. I have to close Firefox and when I try to restart, it says that Firefox is already running. I am also not able to shutdown the Windows.

    Clear Cookies & Cache
    https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
    Clear the Network Cache
    https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
    You can also try to reload the web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    Check and tell if its working.

  • Windows 2008/R2 not getting IP from Lab Manager 3.x

    Hi all.  We had a crash of Lab Manager 3.x here a few months back, and I've rebuilt the infrastructure back up. 
    We currently use three OS's for our lab testing, Win 2K3, RHEL 5, and Win 2K8 R2 and non-R2.  For the Win 2K3 and RHEL VM's, there are no problems with Lab Manager assinging an IP to the boxes when they are spun up.  I have a pool of 192.168.194.0 /24 assigned and each machine will take the next available IP in that pool.
    The Win 2K8 servers, however, are a different story.  No matter what I do, I can't seem to get the Lab Manager to assign an IP to the box when it's spun up from a template.  In LM, it states the machine has been assigned an IP of 192.168.194.x, but when I check the machine via console, it seems to be pulling IP's from other DHCP VM's we have deployed, and not LM. 
    Is there a way to set the template for 2K8 to pull the IP from LM as opposed to an Win DHCP box? 
    Thanks!

    Hi
    Welcome to the communities.
    Please check if windows getting APPIPA IP or not.
    If APPIPA ip not getting something wrong with inbuilt NIC or driver.
    "a journey of a thousand miles starts  with a single step."

  • Unable to delete queries from POV Manager

    I have Smart View cells in a word document. I would like to clear the word document of its connectivity, so I connect to Hyperion, choose POV Manager, highlight the query.
    However the delete icon is not available for me to delete the pre-existing POV Manager query.
    Anyone have this problem?
    JTS

    got round the problem by doing a "cms recover identity" on the WAE, this allowed it to register with the CM

  • Running OSB and SOA Suite as Windows Services?  Node Manager

    Hi,
    Based on our current hardware configuration, we need to deploy our SOA Managed Server and Admin Server on the same machine as our OSB. Currently for development we just start the servers using the start scripts and keep a window open for them (3 of them: 1 - admin, 1 - soa_server1, and 1 - OSB.) We want to be able to run these as services and allow the admins to log out of the box. It seems like the Node Manager would allow us to do that but can we configure our Windows server to have a Node Manager running for the OSB and another for the SOA stuff on the same box? Do we even need to do that? Can we have a single Node Manager manage all three on port 5556?
    I hope this makes sense. Thanks in advance for any quick responses.
    Jeremy

    Definitely you can (should) have a single node manager. You may refer below links -
    http://blogs.oracle.com/jamesbayer/2010/01/weblogic_nodemanager_quick_sta.html
    WLS 10.3.2 Adminserver startup failed when trying to run as Windows Service
    Regards,
    Anuj

  • Unable to set node credentials for /LDAPv3/127.0.0.1 with record name n`.

    When starting Server Preferences, I receive a window with the following text:Unable to set node credentials for /LDAPv3/127.0.0.1 with record name n`. There may be an error with the Open Directory Service.
    This started to occur after I used the command changeip to change the ip of the service.
    I've tried (Re)starting Open Directory Service, but that doesn't resolve it.
    Does anyone know how I can resolve this error? I'd like to be able to user Server Preferences again!

    One of our servers (10.6.8)  that had been running for months suddenly started generating that error message when trying to access Server Preferences.  Workgroup Manager, which seems to use the same login information, accessed just fine. We tried deleting access information in Keychain, to no avail. What finally worked for US was:
    - Via Server Admin, (in Open Directory > Settings > General) change the Role: Open Directory from Master to Standalone
    - This (for us) then restored access to Server Prefs
    - Use Server Admin to change the Role back to Master
    Warnings - 1)  backup first  2) you will have to reinstall the master password, and  3) ALL accounts were lost and had to be recreated.

  • CUA: One or more errors occurred while checking the status of Windows Firewall on the cluster nodes

    Cluster with 2 hosts 2012 R2
    Scheduled CAU fails with:
    CAU run {4EFE116C-AB49-456D-8EED-F7EDC764DA49} on cluster Cluster1 failed. Error Message:One or more errors occurred while checking the status of Windows Firewall on the cluster nodes. Review the errors for more information on how to resolve the problems.
    Error Code:-2146233088 Stack:   at MS.Internal.ClusterAwareUpdating.Util.<CheckFirewallsAsync>d__3a.MoveNext()
    --- End of stack trace from previous location where exception was thrown ---
       at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
       at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
       at Microsoft.ClusterAwareUpdating.Commands.InvokeCauRunCommand.<_ProcessCluster>d__78.MoveNext()
    If I run CAU "Analyze Readiness" ALL comes as PASS
    If I run CUA by hand on same hosts with NO change to the system (not even reboot) it finishes OK
    Anybody any ideas?
    Thanks
    Seb

    Hi,
    In some case if you disabled the connection in Windows firewall inbound of
     "Cluster aware updating" service it will can’t use the CAU.
    More information:
    Starting with Cluster-Aware Updating: Self-Updating
    http://blogs.technet.com/b/filecab/archive/2012/05/17/starting-with-cluster-aware-updating-self-updating.aspx
    What is Cluster Aware Updating in Windows Server 2012? (Part 1)
    http://blogs.technet.com/b/mspfe/archive/2013/02/06/what-is-cluster-aware-updating-in-windows-server-2012.aspx
    Cluster-Aware Updating Overview
    http://technet.microsoft.com/en-us/library/hh831694.aspx
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Unable to create node /home/ SID adm with type directory

    I am currently experiencing a problem when trying to install a Java Stack onto my new SCM 7.0  EHP1 server.
    I receive the error:
    System call failed.  Error 89......mkdir..../home/djdadm....
    (djd is the SID of my new Java AS)
    This is followed by an error:
    Unable to create node /home/djdadm with type directory
    We have Solaris v10 (SPARC), and the ABAP stack has already been installed successfully.
    The user djdadm was created manually on solaris before starting the installation (assigned to groups sapsys, dba, sapinst + oper) and the home directory "/usr/sap/DJD/home" was specified. 
    Note the difference in the home directory that it is trying to create to the one that we set against the new user djdadm.
    This error is experienced quite early in when SAPINST is performing the tasks (and it stops at the Create users for SAP system stage).
    I was experiencing a problem where SAPINST crashed completely for a while, so I've downloaded the latest version of SAPINST today.  Also, I've set a new TEMP folder and am running SAPINST from there, but am stuck at the problem mentioned above.
    Any help would be much appreciated. 
    Alistair Crawshaw

    Hello,
    It looks like a Solaris issue. Check if the home directory /home is reserved in the Solaris configuration.                                                                               
    You may try this in that case:       
    1. modify /etc/auto_master file to change the entry for '/home' to say 
       '/autohome' instead                                                  
    2. reboot                                                              
    3. rmdir /home                                                         
    4. ln -s /export/home /home (make sure /export/home exists)       
    Regards,
    Désiré

  • Starting Admin Server with nohup from Node Manager

    We are using WebLogic 9.1 on Windows 2003. I am able to start the Admin Server from the Node Manager using WLST but when the user logs off the server the Admin Server exits.
    The documentation says to use the -Xrs or -Xnohup options for Sun Jvm or JRockit Jvm. Where should this option be invoked?
    I have placed the option in the Arguments field of the 'Server Start' tab in the Admin Console. And I have also placed the option on the command line when invoking the WLST The Admin Server still exits when the user logs off the server.
    Can this option be used with the WLST command that starts the Admin Server? If so, does anyone know the syntax?
    Your help would be appreciated.
    Thanks

    Can you explain how are you doing this. Are starting the server using WLST nmStart()?
    If you are using nmStart(), then is your nodemanager running as a windows service.
    Also, the option you are referring to should be used for the JVM running as a Windows service. If you start nodemanager as a service (which you typically should do in your case), then you can place the -XnoHup option on the Java command line for the Nodemanager service..
    Venkat

  • Has anyone encounter this "unable to set node credentials for /LDAPv3"?

    Install and updated the Macmini server to 10.6.5. It working fine until try to access the Server Preferences and error message "unable to set node credentials for /LDAPv3/127.0.0.1 with the record name **." Looking at the logs and has servermgr_accounts got error 5203 trying to auth to local LDAP node. Has anyone found solution for this problem?
    Thanks
    Luis

    Thank you for responding. This is what we are using in a small company a Cisco Switcher, and don't have a router.
    If you're getting connections off of the network out to the Internet, then yes, there is a router involved. Somewhere.
    MacMini server I have an IP address of 169.254.xxx.xx, before IP address was 192.254.xxx.xx.
    That IP address implies that the box isn't getting an IP address from a DHCP server; that's the self-assigned block. (Officially, these addresses are in the Automatic Private Address Configuration Automatic Private IP Addressing (APIPA) IANA reserved range.)
    Which implies that at least two problems lurk.
    Mac OS X Server must have a static IP address. Not DHCP-assigned dynamic addresses.
    And a DHCP server isn't answering the IP address requests. (Well, not unless the DHCP server is passing out addresses in the self-assigned block, and that wouldn't likely be considered best-practice. More likely an IP address from a DHCP address pool allocated within a subnet somewhere in the 10.0.0.0/8 or 172.16.0.0/12 or (less desirably) 192.168.0.0/16 private blocks.
    The Firewall is not turned on. Its purpose is for guest to access files, without deleting or modifying it.
    When you're debugging problems, simplify. Divide the problem. With network services, test the lowest levels of the stack. Then work your way up the stack; toward higher-level services and mechanisms. Then add more parts and pieces, and DHCP and related.
    IP hosts operating at 169.254.0.0/16 addresses (for longer than it takes to get an IP address from DHCP) usually implies that the network configuration is invalid or the DHCP server is not working.
    I did not expect that Open Directory would be a big problem.
    If DNS services or IP routing is misconfigured, then the whole rest of the stack will be unstable at best. The configuration order (and debugging order) involves functional IP networking and hardware, first and foremost. Then having functional DNS. Then Open Directory and then Kerberos. Then the rest of the stack.

  • Windows Server 2012 R2 RDS: RDS Users are unable to delete files from their desktop

    Hello,
    We are working with Windows Server 2012 R2 RDS. We also implemented User Profile Disks. This is all working fine without problems. The only issue I have is that normal users are unable to delete files from their desktop. They are getting a message:
    you'll need administrator permission to delete this file, with the prompt for administrator access.
    They can edit, copy, rename, cut and paste files. But they cannot delete a file from their desktop.
    I checked the security permissions of the files on the desktop (for example a normal self-created PDF file) and the users are owner and have "Full Control" over the files.
    I checked the file permissions and took a look under "Advanced", selecting the specific domain user and checked the "Advanced Permissions" and the user has the "Delete" option checked. So he should be able to delete the
    file.
    I am guessing this is UPD related issue, or something in GPO. But I already unlinked the GPO objects, that I felt could be the source of this problem, but without results.
    Could someone give me a hint on where to look? It's kinda annoying to users, that they can't delete their own files.

    Hello Bria,
    What you should check first, is the NTFS permissions on the User Profile Disk to begin with. See if the user has full control over the items that are in the UPD.
    Also check the GPO's that are enabled for the user and computer account. You can check that by running: gpresult /h <path>\gpresult.html
    There are two GPO settings that could prevent the user from deleting his/her own items: 
    User
    Configuration\\Policies\\Administrative Templates\\Windows Components\\Windows Explorer\
    Hide these specified drives in My Computer
    Prevent access to specified drives in My
    Computer
    There might be other GPO settings, that block deleting items on the UPD, but can't think of any out of my head.
    I can only think NTFS and GPO settings that might prevent the user from deleting items. In my case it was a GPO setting, that I didn't suspect.

Maybe you are looking for

  • Electronic signature in merged documents?

    I am trying to create a new document using multiple files. Some of these files contain electronic signatures. Can the electronic signatures be preserved in the merged document?

  • Problem with reset in cs5

    with ctrl alt shift to reset, i noticed this created problem with normal setup. things i noticed are that you can't open new file, it returns error message and you have to go to prefence and off open gl drawing to fix them. and other thing if the mas

  • HP 8 1401 connecting to tv or monitor

    Can you connect HP 8 1401 tablet via adapter (Micro USB to HDMI or VGA) to monitor or tv?

  • Hide/Show Pages Based On Dropdown Selection

    Hello, This one is driving me crazy. In this form (attached) I have 3 checkboxes and based on what is checked, I want to hide the first page and navigate to the 1st checked box. It works for the Web Chat option, but all others do not. Also, on the ne

  • Bought Mountain Lion, How do I download it?

    So I'm upgrading my audio engineering software and I need Mountain Lion.  I don't want to go to Yosemite because it's not officially approved.  I already paid for it online, how can I download it?  I haven't received an e-mail or anything, but my ord