Windows updates not working because it extract patches on Mac partition first., Windows updates not working because it extract patches on Mac partition first.

I have installed BootCamp 5.1 and Windows updates not working because it extract files on Mac partition before installation. Is there any workaround for same ?

To replicate this issue - Try to download .net framework 4.5 from microsoft website and than run that setup on windows partition.
Before installation. it will first extract all the binaries to a other drivers, since in my case other primary drive is E which is a Mac partition so it always give me an error while extractiing and therefore setup is not able to execute propely.
Let me try to get the screen shot of error and send it here.

Similar Messages

Windows update cannot run because service is not working.

Thinkpad E545, Windows 7 (64 bit) Professional. When I attempt to run Windows Update I get the message "Windows update cannot currently check for updates because the service is not working." Microsoft Fix-It does not help. I found a YouTube posted by Richard Lloyd and followed the steps: the Windows Update service is running, the Background service is running. Several web sources including Microsoft point to an Intel RST driver. I downloaded this driver g1io15ww.exe and ran the file, but still no joy. A solution would be welcome, and Happy Thanksgiving. -- Alan

Hello and welcome,
Your laptop is AMD-based (IIRC) so an Intel driver isn't going to help.
If the update issue is caused by the AHCI driver incorrectly reporting physical sector size (that's what those IRST reports are about) it might be fixed by installing the correct AHCI driver for your laptop:
http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-edge-laptops/thinkpad-edge-e5...
There are other reasons for Win update failures, so this isn't a sure thing. Worth a try, maybe. I've personally only seen this issue with Intel hardware.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Are there any update or patches for Firefox 4. It works very poorly with Windowa 7 and not at all with Youtube?

It freezes up all the time..."Firefox not responding". Also it will mot allow me to share YouTube videos and Facebook. i have none of these problems with IE or the old Firefox 3.

An update was released today. Give it a spin and see whether it helps! (Currently, I believe you would have to download the full install, but hopefully the update button will start working in a few hours.)
For what it's worth, I haven't noticed any problems running Firefox 4 on Windows 7, but I have not tried posting anything to YouTube or Facebook.

Trying to Remove iTunes software components because of 11.1.4 update error and using Windows 7 uninstall Apple Mobile Device Support does not work. Any suggestions?

Had error while updating Itunes to ver 11.1.4. I had 11.1.3.8 previously. Following instructions for Removing and Reinstalluing iTunes and other software components. Was able to uninstall iTunes and Apple Software Update, but attempts to do the same under Control Panel failed for Apple Mobile Device Support (ver 7.0.0.117). Directioons say to uninstall components in order given so I cannot continue until Apple Mobile Device Support is removed. Any suggestions?

Try reparing and then remove again if the repair is successful, otherwise move on to the next step. See Troubleshooting issues with iTunes for Windows updates for more information.
tt2

Patches did not update to client Windows 7

Hi
We have 2 domain controllers installed on Windows server 2003 STD. Also Group policy management installed with the these servers. We have installed WSUS server on the another server that installed Windows server 2008 STD. When WSUS server shows thelist
of updates, I have deployed the updates to the clients(Windows 7 Professional). When I checked the clients, it seems that it could not find the patches update that I have deployed. So, I go back to check GPO that I created to deployed update to clients(Computer
Configuration-->Administrative Templates-->Windows Update). I double click one item to see the detail, I saw it's said that supported on: Windows Server 2003,XP SP1, 2000 SP3. I thought that 's why I could not deploy the update patches to Windows 7.
Then I have installed Group Policy Management on the same server 2008 that I have installed WSUS server. Then I have create new GPO, linked, enforced it. But it's still not work. I cannot deploy the update patches to client. Kindly request any suggestions
for this help to deploy the update.

Hi Lawrence,
The problem is I deployed the update via WSUS 3.0 to install patch on those Windows 7 clients. But it seems that it those clients could get the update from WSUS server. From WSUS server, it saw the clients machine. I checked Group Policy that running on
Windows server 2003 domain controller((Computer Configuration-->Administrative
Templates-->Windows Update). Then I opened one item here. Suppose I open item "Configure Automatic Update". It has the message in the bottom of this message here said that "Supported on: Windows Server 2003, XP SP1, 2000 SP3".
So I was thinking is it possible that the updates could not deploy to those clients because the group policy still running on Domain Controller Windows server 2003?
When I built the new server that running Windows server 2008 STD and add the component Group Policy Management on that server. It will has the same policy from domain controller Windows server 2003. But when
I looked in the settings in Windows Update. Suppose I opened the item "Configure Automatic Update". It said that "Supported on: At least Windows 2000 Service Pack 3 or Windows XP". Then I not sure is it need to be upgrade Domain Controller
from Windows server 2003 to Windows Server 2008? When I checked the Resultant Set of policy from the client, it get the policy from Group policy domain controller, but I check Group policy on the clients. It didn't shows the policy that I set on the domain
controller. Kindly you advise me how to let the policy deploy to clients running Windows 7.
Thank you very much.

Apple software update for windows does not work properly

Apple software update does not work properly

I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

The upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program

trying to install an update patch for Citrix xendesktop 7.5 and the error when I click on the msi patch is "the upgrade patch cannot be installed by the windows installer service because the program to be upgraded may be missing, or the upgrade patch
may update a different version of the program"
The application was installed 2 days prior and works fine but the patch will not install.
Any ideas?
Wendy2014

Yes let's see if there is any error occurs in installation log.
Meanwhile from the error message, the possible cause is that a part of the application is missing such as a registry key with app version. In this situation you can first test to reinstall/repair the application though it is still working fine - see if issue
persists after reinstall the app.
Meanwhile you could also contact Citrix about this issue. It may be a common issue and Citrix may provide a quick fix for it.
If you have any feedback on our support, please send to [email protected]

SCCM 2012 Software Updates not installing (bothh Windows patches & 3rd party updates)

Using SCCM 2012 R2, I am having a problem getting Windows updates to install. Applications published to people work, and basic software installations published to machines for a straight install work. However, both Windows patches and Adobe patches
fail to install on clients. I have imported the Adobe catalog into SCUP, and publish through WSUS. I can see the Adobe patches and Windows patches in SCCM, and can publish them. However, in deployment status out of 4 machines in my test group the Windows patches
installed on 1 and the other 3 are still in Unknown status with category of "Client check passed/Active". However, none of them are installing the patch - they don't even seem to try. All of those are Windows 7 PCs, incidentally. On Adobe patches,
one PC fails and the other 3 machines still sit in Unknown status. Certificates are distributed,
Any ideas what might cause the deployment to not push some targets, even when it's past the deadline?
Thanks,
Andy Maslin

An unknown status means that the clients are not reporting back to ConfigMgr correctly. This is often due to the WUA not pointing at the correct WSUS instance. You can verify this by examining the WUAHandler.log on one of those clients and it will clearly
indicate an issue with this which in turn is often due to a group policy overriding the ConfigMgr behavior.
Jason | http://blog.configmgrftw.com

Internet browsers do not work after updating to Windows 8.1.

I have spent several hours researching my issue, performing fixes that have worked for others, but to no avail. I have talked with 3rd party tech supports, in addition to Microsoft tech support. I also recently spent 3 hours under remote access with a helpdesk
employee. To no avail.
My issue:
Recently updated to Windows 8.1. Immediately following, none of my browsers work. Internet Explorer is entirely out of commission. Firefox and Chrome, however, interestingly, are able to open simple google pages: gmail, google maps, google search - I can
even search things that I want and results will show up... they just will not load if I click on them. The error message when I click on "More" says something along the lines of "maybe it's your firewall or antivirus wrongly detecting Chrome...",
and I think maybe something similar for Firefox. Explorer simply says that it cannot display the page.
So, how am I writing this? I am currently booted up in Safe Mode, with networking. Apparently it works here, which I'm hoping indicates that the issue to resolvable.
Remedies I have attempted:
I have restarted my computer over 60 times in the past 2 days.
I have troubleshooted the internet connection via the button that says "troubleshoot". It says it cannot identify the problem.
I have executed various command prompts executed as administrator: i.e. netsh winsock refresh, advfirewall refresh, something to do with ipv4, ipv6, a bunch of "IP stack resets", etc, etc.
I have manually added chrome, firefox, and explorer to my firewall exceptions, both via McAfee and via the Windows firewall system. Both simultaneously, one at a time, etc, every combination of this.
I have uninstalled the web browsers and reinstalled them.
I have unintalled my antivirus and reinstalled it, and checked in between.
I have turned my firewall off.
I have manually inputted some kind of DNS address (8.8.8.8 and 8.8.4.4) and/or IP address (forget exactly what was asked of me to input).
I have gone to my "Manage Devices" and updated all of my network drivers, and attempted to revert to old versions of drivers.
There are probably more things that I have tried, I just don't remember exactly and cannot list them. Most things you can find on Google pertaining to this issue, I've tried.
Is there anything at all that anyone can think of to fix this situation? I am about ready to refresh my computer/do a systems restore/whatever to erase everything, factory reset, even (hopefully it works, because I've read that some people have issue, i.e.
no previous partition found or something, or no recovery media present, etc, etc).
Before I resign to this, PLEASE FOR THE LOVE OF GOD HELP ME.
Also, may I please note here that given the sheer frequency of this issue around the web that I've found, I think it is absolutely ridiculous and irresponsible of Microsoft not to rectify the issue. This is even 3+ months following the release of the
update; I always lag on updating such that bugs like these are fixed before I get on the train. This update has essentially reduced my multi-hundred dollar computer to an infantile calculator/solitaire/checkers/Microsoft office LCD screen. Not to mention wasted
2 full days of my time.
Sorry, just saw red there at the end and had to vent my anger. Please help.

Hi,
I can imagine the inconvenience you have experienced. I will try to help you in fixing the issue.
Please test this issue in the Clean Boot environment to check if there is some conflicts with network.
If the issue disappears in the Clean Boot environment, we can use a 50/50 approach to quickly narrow down which entry is causing the issue.
How to perform a clean boot to troubleshoot a problem in Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
Also, to find where your problem is, I suggest you use Network Monitor tool to capture a network package:
http://www.microsoft.com/en-in/download/details.aspx?id=4865
Then, please upload the package here for further research.
Note: I highly recommend you use SkyDrive to upload collected files and to post screen shots/pictures. Although you might not be used to it, SkyDrive features a lot of free advanced functionality around file storage capacity, sharing, privacy, and collaboration:
http://skydrive.com
Regards,
Kelvin hsu
TechNet Community Support

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a W

I have been updating my PSE since 10. Recently I purchased PSE13 as I didn't see an update for my 12. I was changing to a new laptop as my old laptop had been patched and worked and was showing signs of giving out. It was a Window's 7OS. My new one is a Windows 8 OS so I bought the 13 and downloaded it on the new laptop. Our desktop had died so I downloaded the 13 on the new desk computer also. Not thinking I downloaded 13 on my old laptop as I hope to get it patched up enough to be a backup for my photography. When I tried to activate it I realized that I had downloaded it too often. I didn't know you could only use it on two computers. Learn something new every day.. Any way I removed it and now my PSE 12 does not seem to be working. Now it could be something that I did or something that is an issue with the laptop. this laptop has all the previous editions on board as I always tried to update, except for the year I got a really good deal on Black Friday. I also notice that the new laptop has a copy of PSE 12 in the program list. To my knowledge I have never deactivated any of my PSE's except the extra 13 downloaded. Bottom line, do I need to go in and deactivate previous PSE versions and removed them from my computer? I could certainly use the space and secondly, can I deactivate the PSE 12 and then go back and reacitivate it and install it again on the old laptop or the desktop, whichever I deside would be the most appropriate place for the newer program. For the PSE 12 since it is an updater for 11, does the 11 still need to be on the laptop? thanks for anyone who can understand what I am trying to say and can advise me as to my next move. Thank you very much.

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

You Tube requires Flash update. Worked for laptop Windows 7 but not PC Windows Vista. Can you help?

You Tube said I needed latest Adobe Flash Player, so uninstalled old version and reinstalled latest version 11.6.602.171 on PC running Windows Vista Home Basic SP2 32-bit OS. My system says it's there, but it still won't work on You Tube - still get same message saying Ineed latest version.
Had same message on my Laptop running Windows 7 and it updated and works fine. I use Internet Explorer 9.
Detailed Problem Description: Problem with downloading latest Adobe Flash update and viewing YouTube. On PC running Windows Vista Home Basic SP2 32-bit OS, You Tube home page red banner at top said I needed to install latest Adobe Flash Player but even after installing, it does not work and will not play most videos in browser and shows black screen with message still asking to download latest version. Seems to be rather random as to which videos it will play and which ones it won't, although there may be some common link (see examples below). I thought it might have been HTML5 problem but I have successfully played HTML5 and Non-HTML videos through Adobe test site (Adobe Flash Player Help/Video Playback Issues) as well as Stage Videos. (Note: Had same You Tube messages when viewing on Laptop running Windows 7 but that updated without problem.)
Ran Adobe Uninstall. Closed all other programs before reinstalling direct from Adobe (rather than You Tube link). No change.
Ran all Adobe troubleshooting suggestions listed at http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac tiveX_Filtering__if_you_are_using_Internet_Explorer_9_.
Removed browsing data and deleted cache, checked that Internet Tools\Safety\Active X filtering was disabled (but in Internet Option\Security, Active X controls are enabled), disabled Hardware Acceleration, restarted computer but no change to You Tube viewing. Re-enabled, but no change. (WOULD LOVE ADVICE FOR FUTURE REFERENCE IF I SHOULD KEEP THIS ENABLED OR DISABLED.)
I have updated graphics drivers for NVIDIA GeForce 9400 GT- although had to do manually as NVIDIA auto system scan said "could not detect your GPU". Noted they said Windows Vista supports up to Direct X 10, but my system is running Direct X 11. Had optional update message for "nVidia Graphics Adapter WDDM1.1, Graphics Adapter WDDM 1.2, other Hardware NVIDIA GeForce 9400 GT" on both PC & laptop. Laptop downloaded fine. Tried to download on PC but was not successful. Error Code 80070103, possibly because system had already been updated? Current driver version 9.18.13.1407 - "Windows has determined that your current driver software is up to date".
Running Norton 360 but it did not block or indicate any problems with Flash Player download.
Problem URL: http://www.youtube.com/?utm_source=navclient (red banner at top of home page says I still need to download latest Adobe Flash).
Example of specific video that will not play: http://www.youtube.com/watch?v=384IUU43bfQ
Example of specific video that will not play: http://www.youtube.com/watch?v=YgMen4-PI74
Example of video that will play: http://www.youtube.com/watch?v=TGbrFmPBV0Y

Dear Chris,
Thanks for reply. I ran the recommened Adobe uninstall program so assumed it deleted whatever it should have, before installing new version. When it didn't work I followed instructions in Flash Player help page (screen shot below) which said to delete the Roaming App Data/Macromedia/Flash folder and Roaming App Data/Adobe/Flash folder, which I did.
Below are screen shots of C:\windows\system32\macromed\flash files as they currently stand. I have a fuzzy recollection that it was deleted at some point because I think I went searching for it during one troubleshooting session and it couldn't be found (but maybe I'm geting confused with the App Date folders?). Anyway I presume these current files are all post-reinstallation as the dates are all 5 or 6 March (did them before and after midnight). I'm on Australian time - not sure where you are. However, notice install.log date is 21/05/2010 and Flash Player Trust sub-folder is dated 6/09/2008.
When I right click on the screen of both videos that will and won't play, I just get a list of options starting at "Copy video URL" down to "About HTML5". So not sure what you mean when you say "For the videos that do play, when you right click on them what version of Flash Player is reported at the bottom of the context menu?" as I can't see any info like this. Do I click somewhere else?
If you are able to get the info you are after yourself, two videos that will work are:
http://www.youtube.com/watch?v=OLKlTN1JN7w and
http://www.youtube.com/watch?v=TGbrFmPBV0Y
Also, with hardware acceleration enabling or disabling, the only place I can find to do this is through the Adobe Flash Help page http://helpx.adobe.com/flash-player/kb/flash-player-games-video-or.html#main_2__Disable_Ac tiveX_Filtering__if_you_are_using_Internet_Explorer_9_
and right clicking on the Flash Player info box, going into Settings and checking or unchecking the Enable box. Do you know if there is another setting in my actual computer where I can do this and or there's some other setting I need to change? There doesn't seem to be anything similar when I go through Conrol Panel - Flash Player.
5. Delete all Flash Player browsing data
a.. Click Start > Control Panel.
b.. Double-click Flash Player.
c.. In the Flash Player Setting Manager, click Advanced.
d.. Under Browsing Data and Settings, click Delete All.
6. Remove Flash Player cache
a.. On your computer, select Start > Run. (On Windows 7, click Start and type in Search Programs and Files.)
b.. Type %appdata%\Adobe and click OK.
c.. Delete the Flash Player folder.
d.. Repeat step 1 and type %appdata%\Macromedia.
e.. Delete the Flash Player folder.

Windows update on windows 7 laptop will not work

Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer.
I am receiving the above message every time I click the ' check for updates' icon. Restarting does not resolve the problem.
I have trawled the internet and found a solution that worked for several people- going to services.msc, closing windows update,
deleting files in c:\windows\software distribution, reopening windows update through services.msc- however this has not resolved the issue for me.
Under systems.msc it is listed as started, automatic (delayed)
The Background Intelligence Transfer service is the same. I have checked the profiles of both programs and there are no discrepancies.
I have used the microsoft fix it program. No effect
Please help!

Installing the Intel Rapid Storage Technology Driver was THE fix for me as well. I had spent many hours on this today trying to resolve the following errors:
Windows Update could not get updates because "the
service was not running" (even though Windows Update and the BITS services and others
were in fact running).
Also Windows Defender Service could not start. I opened the Windows Defender Control Panel applet, it told me it was stopped, I clicked on the Turn On button, while at the same time I monitored the services app (command prompt - services.msc).
I watched the status of Windows Defender service. It kept changing from Stopped to Started just for a second or so, then the service would immediately stop again. In Control Panel, Windows Defender finally timed out
with the same error listed by amerianz: Error 0x8e5e0247: 0x8e5e0247
I tried many things from different search results for these 2 issues. Among other things, after I disabled Antivirus, I stopped WUAUSERV and BITS, renamed Windows\SoftwareDistribution then restarted. I tried a Windows Update
FixIt on the Microsoft FixIt center. It said it found and fixed Windows Update issues, but no change. I tried running SFC /SCANNOW from command prompt. The log said it found corrupted files but this made no difference.
Finally after installing the Intel Rapid Storage Technology Driver, my PC immediately found new hardware and installed a driver. Note: before installing this driver, all hardware listed in
Device Manager already had drivers installed. I was then prompted to reboot. After rebooting, Windows Update still had a red X and could
not check for updates. So I opened the Windows Defender Control Panel applet, which showed that updates were available. This meant of course that the Windows Defender service had started successfully. I then clicked on the
Check for Updates button on Windows Defender, and after several seconds while Windows Defender was looking for updates, I noticed that the
Windows Update icon had appeared in the system tray and Windows was downloading new updates. Both issues fixed. Many thanks.

When I try to install Windows on iMac with Bootcamp I get this message,"Can't install the software because it is not currently available from the Software Update server."

I try to get Windows 7 on my iMac 21.5-inch but on the Bootcamp Assistant I get this message,"Can't install the software because it is not currently available from the Software Update server." Please help me and thank you.

I have that problem too. There's many other discussion threads as well. Either Apple doesn't realize they have a problem, or they do and simply don't care. Either way, not good.
There is a workaround that I'm going to try next. Go to this webpage:
http://support.apple.com/kb/HT5634
Scroll down to the middle of the webpage. Hit "Expand All". Now, search the webpage for the Apple product name of your computer. It should be something like "MacBook Pro, 17-inch, Early 2008". If you're unsure what you have, open "About This Mac" (upper left corner of your screen, Apple menu), and hit "More Info".
Now that you've found your computer, read across the table, to the version of Windows that you want to install (32-bit or 64-bit). Hopefully you'll find a "4" or "5" there. Click on that number, to go to the download page for the drivers that you need. If you just see an empty box there, then you're out of luck....
Hopefully there will be drivers. Download those, unzip, and then copy to a USB stick that has been formatted for MS-DOS FAT (or FAT32). Use Disk Utility to format your USB stick if necessary. Now, you have the drivers you should have gotten from the Boot Camp Assistant download. You should then be able to go back to Boot Camp Assistant and follow the instructions from there.
Hope it works!
Josh

When trying to download Boot Camp Windows Support Software, error says: "Can't install the software because it is not currently available from the Software Update server."

I use a Macbook Pro 13" mid 2010 on Mavericks and I've tried using the Boot Camp assistant to download support software for Windows 7. This gives the error "Can't install the software because it is not currently available from the Software Update server."
Further, I tried to separately download Boot Camp 4 and 5. When I do this and try to install from Windows 7, it says that this version of Boot Camp is not for this computer and doesn't install. The result is that I have Windows 7 working and installed, but am unable to use the trackpad to rightclick, brightness settings, etc.
Please help!
Thanks

You need to run Bootcamp Assistant and select only the menu item to download the Windows Support Software. Follow the instructions. The download servers are extremely slow therefore it may take several hours to get the download.

Windows updates not working because it extract patches on Mac partition first., Windows updates not working because it extract patches on Mac partition first.

Similar Messages

Maybe you are looking for