Windows Virtual PC running Windows 7 Pro on Windows 7 Pro with Network Sharing (NAT)

I have been trying to get a new install of Windows 7 in Windows Virtual PC 6.1 to use the Shared Networking with the Windows 7 host.
It works with Windows XP as the guest. I tried changing the DNS to 192.168.131.254 and 252. It works through a dedicated NIC but I need NAT because I have to use the IP of the host (this is in a computer lab where students play with their own Windows 7 vhd).
Any help would be appreciated.
Randy

Try http://social.technet.microsoft.com/Forums/en-US/w7itprovirt/threads
The following is signature, not part of post
Please mark the post answered your question as the answer, and mark other helpful posts as helpful, so they will appear differently to other users who are visiting your thread for the same problem.
Visual C++ MVP

Similar Messages

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo, however when I try and open the package the error message "This volume is used for TimeMachine-backups". Which is not true. I´m using TimeCapsule.

I am running a MacBook Pro with 10.7.5 and I downloaded the OS X 10.10.2 Update Combo.
When I try and open the package after accepting the lincence-agreement and upon choosing the install-volume the error message appears: "This volume is used for TimeMachine-backups".
Which is not true. I´m using a timecapsule for backups.
How can I proceed?

I am using a MacBook Pro (2010) with 2.53 GHz Intel Core i5, 4GB, 1067 MHz, DDR3, Startvolume Macintosh HD.
After downloading the package and starting upgrading it asks acceptance of the license-agreement. After that it asks for the volume were to install. And when I click on the Startvolume Macintosh HD (which is the only available on the machine) it says: "The volume is already being used for Time Machine-Backups".
It doesn´t offer to skip that point or to reconfigure the Time Machine settings.
The point is that my Time machine is not and has never used the Mac HD for Backups. In the past I have used an external drive and since 05/2014 I am using a Time Capsule which is appropriately addressed in the Time Machine settings.

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

Satellite P200 - Windows 7 freeze with network

Hello, (sorry for my poor english)
Here is my problem:
I connect to internet either by wireless or by ethernet card.
Windos 7 freezes:
1) When my connection is disconnected and it reconnects or I go out of hibernation
2) or when I'm on a shared network shared folders between my two computers at home
3) When I select the network printer.
This problem arrive in wifi or in direct cable network.
I did not have problems with vista on the same hardware.
Everything else works perfectly on this computer, download, games, music, videos, software etc. ...
The latest drivers are done (the last in date). I did all possible tests and seen everything I could find on google and here ... unsuccessfully!
Toshiba laptop P200
Card: Realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.20)
Atheros AR5007EG Wireless Network Adapter
Thank you in advance!

Hi,
Try to boot in safe mode and verify if the computer works fine without freezing. To boot to the desktop in safe mode
keep tapping F8 key during restart. Once you see the option to boot in safe mode select it and press enter.
[http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode|http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode]
If the computer works fine in safe mode, you try to put the computer in clean boot state to make sure that third
party applications are not causing this issue with computer performance.
To perform a clean boot, follow the steps below:
1. Click Start, type msconfig in the Start Search box, and then press ENTER.
If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
2. On the General tab, click Selective Startup.
3. Under Selective Startup, click to clear the Load Startup Items check box.
4. Click the Services tab, click to select the Hide All Microsoft Services check box, and then click Disable All.
5. Click OK.
6. When you are prompted, click Restart.
7. After the computer starts, check if it works normally.

How different is Windows Vista run on Macbook Pro with 128MB and 256MB VRAM

Hi guys,
I am going to buy a MacBook Pro soon. But I am struggling picking the right model for me due to that I am not sure how differently Windows Vista is run on them.
I don't use much CPU intensive programs. CPU power is not an issue to me. RAM? I will install 2GHz of it regardless which model I will buy. The only thing worries me is the VRAM.
I would love to have smooth experience with the Aero effects. So how much will the difference in VRAM really make?

At this time Windows Vista is not fully supported by using Apples Boot Camp program. It has been done but people that I personally know that have done it have not much success. I currently am running Windows Vista (non beta) in a parallels session and it runs quite nicely. But I don't get the Aero effects. I would certainly suggest 256MB VRAM Microsoft suggests 128 and their suggestions are for minimal performance. 256 will give you the best performance. Hope this helps.
PS Welcome to Apple Discussions.

Running 17" MacBook Pro with 10.6.8 and 10.9.4, but recently unable to star up on 10.6.8 please help.

I have a 17" mid 2010 macbook pro .
I have been running two partitions one with Mavericks 10.9.4 and one with snow leopard 10.6.8.
I have recently lost the ability to startup on the snow leopard partition.
When booted to mavericks all seem to be fine with files on the snow leopard partition.

Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

My Kingston usb is showing on desktop but not running in macbook pro with retina display...

showing message : kingston is not spourting os x

Its possible to replace it yes. Its not easy, as you have to dissasemble the MacBook to get to it.
The drive you want is not compatible. The drive in current 2014 MacBoock Pro´s is not even a Sata type drive. Its a PCie Blade type drive.
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Display+Mid+2014+SSD+Rep lacement/27849

Final Cut Pro with Network Home Directories

Hi,
I have been tasked with setting up a Mac network primarily for use with FCP. The main requirement is that the user profiles are roaming as users will move from desk to desk, it is a college.
I have an Xserve with OS X server and Open Directory configured. I have configured the network home directories and have successfully logged in with different users.
My questions is regarding Final Cut. What is the best way to configure Final Cut to reduce the amount of network traffic?
I have redirected the users cache folder to the local Mac and configured the scratch disc to a local hard drive. Are there any of tips that someone with a similar setup can recommend?
Thanks

Most schools end up using ext HDs. Each student has their own firewire HD with All the fcp capture, scratch etc docs on it.
Thats the only way to meet the demands of video production and retain portability

Windows 7 system cannot network print to LaserJet 1320

Recently our office got a new Windows 7, 64-bit laptop, and for the past three days I have been unable to get it to print though the network to our HP LaserJet 1320. I can connet it via the USB cable and print directly to the printer, however, I recive an "unalbe to connect" error with all attempts to connect to the printer through the network .
The LaserJet 1320 is conncected to an XP system and shared over the network. Three other XP systems and two Linux systems can connect and print to it just fine. Also the Windows 7 laptop has been able to print to a shared HP DeskJet 6980 and an ancient Lexmark 4039 though the network.
It does not appear to be a network issue. I've tried varous versions of the HP Universal Printing driver, but so far not has been able to connect though the network. Is there one in particualr I should try? Does the Universal printing driver not support network printing?
Thanks! Any help with this probelm will be greatly appreciated.

Never mind solved my issue using the specific vista x64 (on windows7) driver rather then using the universal print driver...
Might fix your issue with network shared printer.

Running macbook pro with lid closed

Hi all,
I want to run the Macbook Pro with the lid closed, like maybe when I'm downloading a file or using it as a desktop with an external screen.
I have insomniaX, however I am concerned about heat.
The vent in the back seems to put out as much air as it does with the lip opened.
Any insight on this?
tia
edit: oh yea I have an early '09 mac book pro; 15" if it matters
Message was edited by: große geld

If you use InsomniaX, you should certainly be concerned about heat. I recommend trashing InsomniaX, because it enables you to abuse your MBP in a way that Apple intended to make impossible.
To use the machine with its display closed as it was designed to be used, follow the instructions in this article:
http://support.apple.com/kb/HT3131

Is it dangerous to run MacBook Pro with lid shut ?

Hey Gang,
I run my MBP17 through a Cinema Display when I'm home. I've always kept the lid open a smidge for cooling. Also, I turn off the 17's display to give it a break while I enjoy the Cinema's larger real estate. Question: "Is it dangerous to run the MacBook Pro with it's lid shut ?"
Grateful in advance...
~ FLAKBAIT

Yes, leave it open a smidgen like you have been doing.

Mac Pro with OS 10.5.8 ?

I am running a Mac Pro with OS 10.5.8 and Dual Core Intel Xeon processors, 4mb Ram, 5gb memory. I want to install 64 bit Windows 7 Professional and run it through Bootcamp or Parallels. I have BootCamp running on the machine with Windows XP, but am looking at the possibilties.
Am I out of luck here?
Thanks deanfromnc

If you already have XP installed via BootCamp, then you can upgrade the computer to Snow Leopard or Lion in order to install Win7. If you have a 2006 or 2007 Mac Pro then you cannot run 64-bit Win7 via Boot Camp, but you could using Parallels.
Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

Kindle App crashes on MacBook Pro (with Mavericks)

Hi Folks,
Every time I start my Kindle App in my MacBook Pro with network up it crashes after a few seconds. When network is down, it can work normally for several minutes, but sometimes it crashes too. Here what I got:
Dener macbook$ uname -a   <<-- my OS X version.
Darwin MacBook-Pro-de-Dener.local 13.1.0 Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64 x86_64
The Crash memory dump is:
Process:         Kindle [627]
Path:            /Applications/Kindle.app/Contents/MacOS/Kindle
Identifier:      com.amazon.Kindle
Version:         1.10.3 (1.10.40286)
App Item ID:     405399194
App External ID: 7062660
Code Type:       X86 (Native)
Parent Process: launchd [176]
Responsible:     Kindle [627]
User ID:         501
Date/Time:       2014-04-16 16:50:10.336 -0300
OS Version:      Mac OS X 10.9.2 (13C64)
Report Version: 11
Anonymous UUID: C826805D-2207-7B7D-7B17-50C66872B8D8
Sleep/Wake UUID: 6573ECE7-93E4-4097-B98D-845B03085E7B
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000004
VM Regions Near 0x4:
--> __PAGEZERO             0000000000000000-0000000000001000 [    4K] ---/--- SM=NUL /Applications/Kindle.app/Contents/MacOS/Kindle
    __TEXT                 0000000000001000-00000000014e4000 [ 20.9M] r-x/rwx SM=COW /Applications/Kindle.app/Contents/MacOS/Kindle
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
and then comes a huge list of memory dump data....
appreciate any help!
dener

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

How do I run Windows software on my MacBook Pro with OS X Mavericks

How do I run Windows software on my MacBook Pro with OS X Mavericks? I want to run a TurboTax program to amend an old tax return. Program is not available for OSX.

Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows 7 or Windows 8. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusion and Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. A more recent comparison of Parallels, VM Fusion, and Virtual Box is found at Virtualization Benchmarks- Parallels 10 vs. Fusion 7 vs. VirtualBox. Boot Camp is only available with Leopard and later. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Trying to use Parallels to create a virtual PC running Windows 7

I am trying to help a friend with this problem but I am woefully inadequate to assist on this one! Here is a brief description of what's going on – by the way I am using a MacBook Pro, Lion OS X. I use Parallels to create a virtual PC running Windows 7. I have installed Office 2010 on the PC side and Office 2011 on the Mac. All VBA works fine on the PC side, but bombs on the Mac. It was my understanding (directly from Apple) that with the release of Office 2011 for the Mac that all code was now conforming with the PC version. This is probably true for new code written under Office 2010 (PC), however, most all of my applications have been developed over time through many versions of Windows based software (probably the last 10 years)…to date I have never had an issue with compatibility (on the Windows side). I have done some online research into the errors that I receive, however I am really an novice/intermediate programmer and am unable to find adequate solutions to the initial problems (as shown below).
Once I receive the run-time error 1004 I use the debug feature, etc. and end with "Can't find project or library. The initial error is probably just the beginning, but I am unable to go forward from this point.
Any help would be much appreciated…thanks.

Well your topic is about virtual machines and the body of your post is about Visual Basic. So what exactly do you want help with.
One has nothing to do with the other.
As to the error you posted that VBA program you are trying to run is looking for files in a specific place. Which would not be the same on a Mac as it is on a PC. For one reason PCs use Drive Letters for that path to folders. Mac's use Volume names.
Although I don't do a lot, if any, VBA programing you might be able to run those VBA Apps through the Mac side VBA to convert them to work on Office for Mac. You would also need to copy over whatever it is looking for that gives you that error.

Windows Virtual PC running Windows 7 Pro on Windows 7 Pro with Network Sharing (NAT)

Similar Messages

Maybe you are looking for