Windows was unable to find a certificate to log yo...

Hello,
I have been getting the above error message from my network adapter on my laptop in the last couple of weeks, following years without it and more than a year connecting to my Home Hub 3.
Solutions on the internet suggest unticking the box that says “enable IEEE 802.1x authentication for this network”, but this was already unticked as the settings are WPA-PSK and AES. So despite this box remaining unchecked, the error message keeps appearing - this is not a solution. I have:
> checked the Home Hub settings
> pressed/re-set the Wireless button on the Home Hub
> checked that DHCP on the Hub is assigning a proper IP address and the laptop is connecting to it OK
> checked the network adapter wireless settings and configuration was correct by comparing with my Desktop PC that uses a wireless card (and has not got this error message)
> switched Wireless off and back on again on the Network Adapter
> disabled the network adapter and re-connected it
> deleted the network adapter and re-installed it
> uninstalled the network adapter driver and re-installed it
> run System Restore
None of this has solved the problem. (The network adapter is an Intel Pro 2200BG. I’m running XP, but I don’t think that is anything to do with it, as my two Desktops, one ethernet and the other wireless, are fine.)
Any ideas? Most grateful.

One more thing that is reported as having worked for some people:

Similar Messages

Office Web Apps - Office Web Apps was unable to find the specified certificate

Hello,
Let me start by saying I did not see a forum listed for Office Web Apps and figured the SharePoint forum would be the second best place to post this. With that said, here's my issue...
I installed OWA 2013 on a Windows Server 2012 (not R2) VM and installed all the prereqs as described here: http://technet.microsoft.com/en-us/library/jj219455(v=office.15).aspx Since this is a test environment, I'm planning on using a self-signed
cert which appears to be supported based on info found here: http://technet.microsoft.com/en-us/library/2e147f11-6f47-46bc-90bf-b2f179958d11(v=office.15)#certificate.
I created the cert using the following command:
New-SelfSignedCertificate -DnsName owa.test.local -CertStoreLocation cert:\LocalMachine\My
I then edited the cert's properties in the Cert Manager MMC snap-in and added a friendly name of "2014_OWA_Cert". I then proceeded to try and create the OWA farm by running:
New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateName "2014_OWA_Cert" -EditingEnabled
This produces the following error:
New-OfficeWebAppsFarm : Office Web Apps was unable to find the specified certificate.
At line:1 char:1
+ New-OfficeWebAppsFarm -InternalUrl "https://owa.test.local" -CertificateNa ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (:) [New-OfficeWebAppsFarm], ArgumentException
+ FullyQualifiedErrorId : CertificateNotFound,Microsoft.Office.Web.Apps.Administration.NewFarmCommand
What gives?

Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi

Hi when i open Photoshop i get this message in a little box (could not complete the command because Photoshop was unable to find the JavaScript plug-in.) Im using the trial version of Photoshop

im wondering if anyone can help with this
I get this message when i open PhotoShop
(could not complete the command because Photoshop was unable to find the JavaScript)

Photoshop installer should have installed a ScriptingSupport Plugin in each version of Photoshop you installed. Scan your system for ScriptingSupport I found six on my windows system. Here where I found them:

EA3500 - Windows was unable to connect... (Win 7 and Win 8.1 have done this off and on)...

I recently purchased a Linksys EA3500 router and am using it as the sole router in my home network. I have primarily had three devices connected to the network computers/tablets - two running Win7 and one running Win8.1.
The first few days were OK but then the Win 8.1 system would not connect to the network (see the error message below). "Windows was unable to connect..." I tried the problem troubleshooter, power cyclilng the comptuer, power cycling the router. Updating the router firmware to the latest (it added a .1 at the end). Uninstalling and reinstalling wireless drivers on the computer. I've reset the router to factory defaults. I've run the router with and without wifi passwords.
This morning I was able to connect the Win 8.1 system to the network. Not sure what changed overnight. However, today I have had two instances of a different computer, one of the Win 7 systems, suffering the same problem. Different hardware. The Win 8.1 system is an Asus T100 tablet/netbook using a Broadcom 802.11abgn Wireless SDIO Adapter. The Win 7 system is a Dell E6540 laptop using a Dell Wireless 1506 802.11b/g/n 2.4 GHz adapter manufactured by Atheros Communications, Inc.
Last night, when I was having problems with the Win 8.1 system, I should note that it worked fine with the 5 GHz network. The laptop, however, does not support 5 GHz and now that it's suffering the same problem my only work-around is a cellular hotspot.
I'm suspecting the router at this point. Has anyone else seen this? Any ideas what could be causing it, what I could do to fix it or what I might do to help diagnose the problem(s) ? I'm more than willing to run third-party software to analyze and better understand what is happening on a network level (I would actually like to understand as much as anyone is willing to get me started on).
If I am unable to determine why certain systems almost seem to become "banned" from my network while others are working just fine then I'm going to have to return this device and try something else.
Thanks,
Dave
I recen

Hi @daved31,
You are on the right track. Checking the Wireless MAC Filter is one of the troubleshooting steps. For 2.4 GHz frequency, the suggested channels are 1, 3, 6, 9 and 11. For the 5 GHz, I suggest to use the highest channel. Those channels will give you a better signal, just make sure that no other wireless device is using it to avoid wireless interference.
If only one wireless device is not connecting wirelessly, we should focus on the wireless device itself because we know that the router/access point is working since the other wireless devices are working wirelessly.
I suggest to delete preferred networks on the laptop. Here's the link that may help: http://kb.linksys.com/Linksys/GetArticle.aspx?docid=85537a14b0214be48217c733bba9ac65_Removing_Wirele...

Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks Lance

Hi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Error Code 0x80070005 "Windows was unable to create a required installation folder" when trying to upgrade XP to Windows

While trying to upgrade Windows XP to Windows 7 in Boot Camp after (performing a satisfactory compatibility check) the process aborted with error message "Windows was unable to create a required installation folder." Do I need to have a full version Windows 7 disk instead of the Upgrade version? Any other ideas??

Your suggestion to do Bing/Google search helped. It turns out there was interference from Boot Camp Services. I found two work-arounds that others had used that were stated to have worked. One was to temporarily delete Boot Camp Services and then reinstall it after the XP to 7 update, the other was to create a DVD of the downloaded installer files created by the updater and use the startup application from that DVD.
I had previously tried to update XP in a Parallel Virtual Machine but but XP didn't recognise the Updater disk as a DVD. That led me to try updating in BootCamp. I decided to try using Parallels again and was able to fix the device problem and update t&. I am going to keep Windows XP in the BootCamp partition as an alternate "machine". When I update to Lion I'll keep that partitition since BootCamp 4 that comes with Lion does not support XP.

Airport Utility 5.4.2 was unable to find Airport Extreme base station.

I downloaded the new Airport Utility 5.4.2 to my 2009 24" iMac with Snow Leopard. Now it is unable to find my Airport Extreme base station or Airport Express. My iMac is connected to the network via the Airport Extreme base station but the Airport Utility cannot find it. All I get is this message "Airport Utility was unable to find any Apply wireless devices. Make sure the Apple wireless device you want to set up is plugged in and in range of your computer and then click rescan to try again". I clicked rescan numerous time with no luck. I even downloaded the Airport Utility 5.4.2 again with no luck. What is wrong??? Everything was working fine until I downloaded the Airport Utility 5.4.2.

Thanks for the info.
Following your same steps exactly, I am able to save the configuration file to the desktop, or navigate to another folder to save it at that location.
I was able to do this previously with 10.5.x and with current Snow Leopard. Notice that you list 10.4.x as your operating system. If you are still running this OS, it could be that 10.4.x does not allow this feature with 5.4.2?
Not sure if downloading another copy of 5.4.2 would be worth the pain, as I'm inclined to believe that it probably would not help solve your issue. If you decide to do this, please post back with your results.

Why do I get a error saying mail was unable to find your reply. You may have deleted message.

when sending email, I sometimes get an error stating: Mail was unable to find your reply to: You may have deleted message. This does not happen with every sent message but it is doing it more and more. The reply is no where to be found.

You posted in a 4 month old dead post.
You would do better by posting a "New Topic" in the OS/Mail forum area of which os you are using. You will need to indicate which version os you are using as well as which version of Mail you are using in order to get the proper attention to your post. This will help the users reading your post to suggest solutions.

Trying to set up time capsule but keep getting message stating airport utility was unable to find any airport wireless device. What do I do know?

Trying to set up my time capsule on my imac.
Keep getting message "Airport utility was unable to find any airport wireless devices."
What do I do now?
joglenn

When having difficulties accessing the Time Capsule (TC) via the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the TC wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the TC's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.
Finally, if you are attempting to access the TC via an Ethernet connection, be sure that your Ethernet port is NOT configured for Jumbo Frames, i.e., using an MTU of 9000+.

Security processor was unable to find a security header in the message. This might be because the message is an unsecured fault or because there is a binding mismatch between the communicating parties.

We have a web role where we have hosted a WCF service.
We are facing the below exception intermittently on consuming the service.
Security processor was unable to find a security header in the message. This might be because the message is an unsecured fault or because there is a binding mismatch between the communicating parties. This
can occur if the service is configured for security and the client is not using security.
This is intermittent. Few calls fail , and the subsequent calls succeed without making any changes.
Please help in overcoming this abnormal behavior.
Thanks in advance !!
Best Regards ,
Eswar

Hi Eswar,
As the error message mentioned, it may be a mismatch between the configuration on the client and the server.Try putting all your configuration in a binding configuration and then use the same binding configuration on the server and client. Since this issue
is more related with WCF, I suggest you move to WCF forum, it is appropriate and more experts will assist you.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

We have been seeing this error in the Operations Manager Event Log for quite a while.
Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: MMEA_1348391424
Instance name: aaa.bbb.com
Instance ID: {88AED57C-5627-0C0B-E5C1-A9176A7E64CD}
Management group: SCOMr2
I haven't been able to spot any network outage on the management servers, or the database servers to indicate a problem. It usually happens at night, and when I look at the health explorer, the entity is healthy.
Please would someone help me in finding the root cause of this issue and what can be done to avoid it.
There were no backups running when this alert was generated. As far as I'm aware, everything was idle.
I would appreciate any help.
Karan

Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
Based on the Error it seems the below for me
1. Either SCOM is unable to connect to the operationsmanager / operationsmanagerDW for its transactions on subscriptions
2. Or the SMTP server which your SCOM is using to relay emails has closed the connection.
So my suggestion would be you check the above for issues.
Gautam.75801
There were no network hiccups that I can see. Minimal disk activity. I've looked for any signs of database load, and haven't seen anything that jumps out.
Emails were going through just fine. These alerts get emailed to me, and if the SMTP server is 'closed' SCOM is usually quite sensitive and alerts about that too. I've seen it.
KB

"Airport Utility was unable to find your Airport after restarting"

Airport Express B has been working great for two years, and suddenly it can't be found in Airport Utility.
When I hard reset it, and re-set it up again, I go through the whole procedure, using the Utility to write the new settings : "The settings for this Airport Express have been successfully updated...waiting for Airport Express to restart" and at that point nothing happens - the light stays continuously green, no restart, and shortly afterwards I get the failure message "Airport Utility was unable to find your Airport wireless device after restarting".
I come out of Airport Utility, reopen it, and it can't find the Airport Express. Nothing. A £65 brick that has ceased to be, and this forum is full of people with similar problems. I've tried all of the fixes, including hard-wiring it using Ethernet, and again it goes through the whole procedure abut when trying to restart the AE, fails to find it.
Are Apple making any response to these issues ?

Thanks Martin - I can download it from the Apple website, according to this discussion :
http://discussions.apple.com/thread.jspa?threadID=1085243&tstart=30
My concern is that a) it may not work with an Intel MBP, and that it may break my Airport - totally. Could you let me know what you're running it on ?

Airport Utility was unable to find your Airport device after restarting.

- I just updated the firmware on my base station (it a white dome?? i think snow?) to 5.7
- I am running AirPort Utility 5.5.2 (also recently updated)
- I have (3) AirPort Expresses (just updated firmware yesterday) and now are not being seen in the airport utility. They had been running for about two years just fine.
I have done a hard reset and was then able to see the Airport Express and go through set up. Upon finalizing the set up I get this message:
"Airport Utility was unable to find your Airport device after restarting."
This is happening with all 3 AirPort Expresses

Hello !
I had the same kind of problems when I upgraded to the latest version of Airport (5,7).
The Airport express seemed to have been disconnected, and nothing I could do to reconfigure it, after hard resetting it, seemed to be working.
I did two or three hard resets before remembering having been in a situation like that a while ago.
I went back to the Mini, **deactivated the firewall (in the "preferences" panel), then deactivated also the firewall of the Modem/router provided for my internet connection. Then I went in the other room and did another hard reset of the Airport express, came back in the mini's room, opened the Airport utility, the icon of the Airport express was already visible (which wasn't the case before... ), did the re-configuring.
The reconfigured Airport express reappeared very quickly, then I reactivated the firewalls of the Mini and the router. Voilà !
It took less than two minutes !
And since then the Mini have been streaming music without a glitch to the Airport express.
I hope this will help you and others !

"Airport Utility was unable to find your airport wireless device"

I recently bought an Airport Extreme to replace a D-Link DGL4300. My network is as follows: DSL > Modem > Airport Extreme > Ethernet and Wireless clients (wireless clients include my iMac and my wife's MacBook). This worked fine for about 2 weeks, until my wife's MacBook started having connectivity issues. I did a soft reset on the Airport Extreme, and . . . poof. No internet for anyone. I did a hard reset and used the saved profile that had previously worked (for at least my computer), and after the Airport Extreme restarted, I received the dreaded "Airport Utility was unable to find your airport wireless device". I have repeated this cycle several times with complete power-downs of the modem, the Airport Extreme and all clients, with no change in result.
What's odd is that even though Airport Utility can't find the Airport Extreme, my home network works fine (i.e., all clients can talk to an internal media server and each other), but there is no internet at all. Any ideas?

Alex Fisch wrote:
"Airport Utility was unable to find your airport wireless device"
Until you can complete the configuration process, try connecting your Mac to the AirPort Extreme with an Ethernet cable to see if that allows AirPort Utility to see the Extreme.

Mail was unable to find reply to message

Hi Guys
Im using OS X Yosemite (10.10.1) and use Mail with Exchange for emails. Just recently when I click on the grey return arrow to view the reply ton an email I have sent, it get the following error message:
'Mail was unable to find reply to your message. You may have deleted the message.'
The message has not been deleted as I can see it by going to my Sent folder. It has also worked in the past.
Our whole office (10 people) are all set up EXACTLY the same with Mail/Exchange and are all using Yosemite. Some of us have the same issue as me, and others work perfectly.
Does anyone else have this issue or a solution?
Cheers
Sara

Hi,
I have the same problem but try this. On my mac is works but only with old messages not new replied.
go to Library->Mail->V2->MailData and look for files started with word "envelope". Put this file to trash logout and log in and start mail Wait for reindex...on my mac it works with all replied arrows but problem is when I reply to new message and then click on arrow I have the same error about potentially deleted message.

Windows was unable to find a certificate to log yo...

Similar Messages

Maybe you are looking for