Wire labels moving out of position

Hello all,
I'm having a very frustrating issue with my wire labels. For some reason, all my wire labels seem to get moved up and I have to go back and reposition them. It seems to happen each time I open labview. Here's a screenshot of what I'm talking about. The ones that are in the correct position I already fixed. The "Index for Inc. Px" should be on the blue wire, the "Serial #" on the blue wire and the "Sealed/ATM Conversion" on the orange wire.
Anyone else have this problem?

Then i suggest you to shrink the BD to about 1200x1024. You can use subVIs (hopefully) to make algorithms "to appear smaller" in your main VI.
I am not sure, if this solves your issue, but i know that leaving the bounds of the BD has some weird issues in its backpack.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Similar Messages

Moved out of state forced to use new provider 3TB/TC how do I set up my system again I prefer not to hard wire provider to TC to Mac Desktop.

I am a computer owner not even a novice of any type. I have just moved out of state and forced to get a new provider (TDS) I would like to set up my TC again do I need to hard wire from my modem to TC and hard wire to the Desk Top? You can all laugh now but I need help Please!

Please check your other post for answers.
Please......do not double post on the forum, as this makes things very confusing.
We will work with your original post, and will not respond to this post.

How do I create a new account for an iPod that is on an existing account? My brother and I have shared an account for five years, and now that I'm moving out, I want to create my own account but still want to be able to play the music I've purchased.

My brother and I have shared an account for five years, and now that I'm moving out, I want to create my own separate account but still want to be able to play the music I've purchased over five years.

In order to continue to play and sync the music you purchased with your old account, you'll need to authorize your new computer/iTunes library to do so. You can do this by choosing Store -> Authorize This Computer and then entering in your old account credentials.
That's all you should need to. Then just create your own account and start purchasing and using it the same you have with the old one.
B-rock

X1 Carbon Gen3 (2015) Chassis constantly clicks in and out of position

It's been 1 week since I received my first Lenovo Laptop - X1 Carbon Gen3 and I'm very pleased with it so far. Since the beginning I noticed a 'clicking' sound produced when resting my palms on the keyboard to type, but couldn't figured out what it was. Today I took a closer look and discovered that the bottom chassis (front corners) is being pushed in and out its position, creating this 'clicking sound'. It almost looks like the screws were not properly tightend so they do not allow any flex between the bottom chassis and the body of the ultrabook. I tried tightening the screws, but it seems like they are fully tightened, so there isnt anything I can do about it. I performed a research and found one more user complaining about the same issue here:http://www.reddit.com/r/thinkpad/comments/30a5rz/i_have_a_touch_and_a_nontouch_qhd_x1_carbon_3rd/ I'd like to know if anyone else has experienced this issue and how its best resolved. Many thanks, Chris

I have the same problem (hope to soon being able to say "I HAVE HAD that problem"...) I was very, very disappointed and very annoyed to see that this overly expensive business laptop which I paid +3K USD for not (even) had the same build quality as a simple Macbook consumer laptop, therefore a couple of days ago I sent my X1 gen3 for repair to fix the squeeking and flexinq bottom cover, and hopefully the Lenovo repair center has swapped either the bottom cover or the screws. I must say that it is really embarrasing for Lenovo to charge a premium for a Laptop with such a lousy bottom cover fit..I mean, honestly, where is the quality control...? Anyway, as soon as I get it back after the weekend I will post an update about the results of the repair.

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different p

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different place than where it is on frame 2. Confused!

Hi Melissa - thanks for your interest. Here's the first frame, the second frame and the tween frame. I don't understand why the tween is changing the position of the object in frame 2, was expecting it to just fade from one frame to the next.

HT5622 My family shared an itunes account and now i'm moving out and have created a new account just for myself. Is there a way to transfer my previous purchases on the other account to my new account?

My family shared an Itunes account and now i'm moving out and have created a new account solely for myself. Is there a way to transfer my previous purchases on the family account to my new account?

In order to continue to play and sync the music you purchased with your old account, you'll need to authorize your new computer/iTunes library to do so. You can do this by choosing Store -> Authorize This Computer and then entering in your old account credentials.
That's all you should need to. Then just create your own account and start purchasing and using it the same you have with the old one.
B-rock

My iPhone 6 order was canceled without my permission and without reason or explanation. I have had a verizon cell phone for 13 years and have gotten your cable/internet/phone when i moved out on my own because i had been so happy with the experience i had

I have had a verizon cell phone for 13 years and have gotten your cable/internet/phone when i moved out on my own because i had been so happy with the experience i had with the cell phone service. i ordered my new iPhone 6 on October 6th along with my husband. i was told by the sales associate at the vierzon store where i placed the order that it would ship a week before halloween. instead of a shipping confirmation, i received an email a week before halloween letting me know that my order had been placed on 10/24/14. i thought this was weird, but figured i could weight another week or two, no big deal. my husband got his phone in the mail yesterday. still no sign of mine. then this morning i got an email letting me know that my order was cancelled and if id like to place another order for a phone, then i can go back to the store and do so. why would i want to go through another month of this??? verzon lost my order. i never canceled it and i am beyond annoyed. i am looking to switch my entire house to another provider. this is ridiculous.

i did not get any reasons or explanations. the email just stated that my order was canceled and that it won't be posted to my credit card (i have more than enough to cover the cost, so that is not the issue). also my husbands phone was paid for from the same card moments before me. my balance is always paid automatically and on time. so that couldn't be the reason either. that's what so frustrating is because they didn't explain what happened. this is what the email read exactly:
"This email is to confirm that your order has been cancelled; you have not been billed for this merchandise.
If you would like to place a new order, you may do so by visiting your local retail store or going online to www.verizonwireless.com.
Business customers should refer back to their local Verizon Wireless Sales Representative if you have any questions or would like to place a new order.
Thank you, and we look forward to your business in the future.
Verizon Wireless"
it almost feels like its saying that i canceled it and that this was to confirm that i did. but i didn't cancel anything.

When printing labels for each printed label a blank label comes out of the printer

Hello Experts
We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
Thanks in advance and regards

Hi,
Please check below SAP note and let me know your feedback:
1043235 - Label/thermal printers are not supported by SAP Business
One
Thanks & Regards,
Nagarajan

How to find out the position in which an application hangs

Hi,
is there any possibility to find out the position in a source, in which a deployed application hangs?
For example, there is an endless loop in an application, which is already deployed. In runtime the application hangs in this loop. How can I findout in which line the application hangs?
In other words, how can I see the stack of a certain process,for example, http_workerx?
Regards,
Ali
Message was edited by:
Ali Maraschi-Schouschtari

Hi Ali,
With SAP NetWeaver Composition Environment (CE) 7.1 SP3 it is very easy.
1.) Open the SAP Management Console
2.) Go to AS Java Threads tree node - you will see all the threads that are currently started on the system
3.) Check for threads that are colored in red - it takes about 30 sec the system to detect that an HTTP thread (http_workerx), as it is in your case, is hanging/executing endless loop.
4.) Right click on the hanging thread (colored in red) and pick 'Callstack' from the pop-up menu
5.) In the new window you will see the stack-trace showing what exactly this hanging thread is doing at the moment.
With the previous versions (or SPs) you need to apply a little bit more technical skills for the same result. (1) you need to do produce thread dump of the server that is suspected to have hanging thread and (2) to analyze this thread dump (check what the threads in Running state are doing). As it is in your case with the HTTP worker threads, their names are also printed in the thread dump, so you can focus only on them.

How to find out that position is a chief position or not?

Hi All,
Kindly let me know to find out the position is a chief position or not?
I have to display various positions with Y if it is a manager and N if it is not.
Thanks!
Sachin

Hi
1. tcode PPOME
2. select the position by double click
in the overview position, chief position will be differentiate by symbol a person with red clothes and wearing a hat
in the tab "Basic Data", chief position can be defined if the "Head of own organizational unit" is being ticked/flagged.
Head of Organizational Unit
If you flag this field, the position becomes the chief position of the organizational unit that it belongs to. When this position is displayed again, it is automatically flagged and is automatically the chief position.
Technically, a relationship (A/B 012) is created between the organizational unit and the position.
Field Name : OMLEADER
Data Element: HROMLEADER
hope this info helps you.
best regards,
dhenny muliawaty (pei pei)

I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?

I have just downloaded Mac OS X 10.9 and Pages 5. When I open any pre-existing document in the new Pages the format is zoomed to 125%, the headers are out of position, the margins are changes, and inserted images are also relocated. What can I do?

Have you tried resetting the SMC ? > Resetting the System Management Controller (SMC)

Can i moved any column position at runtime, like ORACLE APPLICATIONs.

Can i moved any column position at runtime, like ORACLE APPLICATIONs.
( move left - right ..... )
Thank you

Najeeb ur Rehman
Thank you very much

Moving Out with 27' iMac

Hi! I'm moving out and I need a box for my 27' iMac. I don't know what should I do like... can we call Apple to buy an empty box with styrofoam in it to protect it? That'd be great.. Any ideas? Please

How far are you moving? Are you going to ship it to your new address? Just pack it up with blanket around it and carry it in your car to your new address.
Next time you buy a computer save the box and packing materials it came in.

Moving out of a shared flat

Hi,
I am moving into my own place in a few weeks time. I share my current flat and my flatmate isn't moving out, and our BT account is in my name.
Please could someone advise me of how I can arrange to transfer the existing line into my housemates name, but take my account with me when I move?
I don't want to land my flatmate with the connection fee, but I don't want to have to sign up as a new customer when I move.
I'm also unsure whether I should take my broadband router with me or leave it behind!
Thanks in advance for any help!
Jenny

I don't think you will be able to do what you want to do. Effectively your flat mate will need to become a new BT customer and you will be able to move your BT Account and services to your new address.
You should contact BT and ask if what you want is possible. See this link for contact details
https://bt.custhelp.com/app/contact/session/L2F2LzEvdGltZS8xMzcwMDg4MzM5L3NpZC9EV1BCQUVybA%3D%3D#h=e...

Contact form randomly appears out of position

Every once and a while, my contact form appears out of position. It is placed over a rectangle and yes, it is grouped with that rectangle. Every so often, I will load the live page in my browser and the contact form appears not where I placed it but aligned to the upper left corner of the rectangle, behind some icons and text.
The only fix is to go into Muse, move the contact form around a little and then back into position and then republish. This is a pretty embarassing bug though, because it seems like it can happen at any time and it both makes my site look like junk AND makes it harder for potential clients to get in touch.
Does this happen to anyone else?

Hello,
This is how it looks on my end: http://screencast.com/t/jZ16KFGq3bY
Is this how it's supposed to look?
Cheers
Parikshit

Wire labels moving out of position

Similar Messages

Maybe you are looking for