Wired network problems
Hi there,
I'm having problems with my wired network and desktop machine running arch.
my problem is the internet connection when browsing keeps appearing to drop when I'm running other internet based things. For instance if I'm downloading a torrent in ktorrent even if the torrent is downloading slowly then browsing becomes impossible. Or if pacman is running browsing again becomes impossible. Sometimes it appears to drop when nothing else is running.
The internet connection is fine because my laptop (also running arch) and on a wired connection works perfectly every time. I have tried swapping from the built-in network card to another one with no success, I have tried changing the cables with no joy.
The internet worked fine on this machine until I reinstalled arch on a different hard disk, i'm completely at a loss as to what the problem could be.
Hi Gcool, here is the output of the 4 commands that you posted
lspci -k
00:00.0 Class 0600: Device 8086:2770 (rev 02)
Subsystem: Device 103c:2a50
00:01.0 Class 0604: Device 8086:2771 (rev 02)
Kernel driver in use: pcieport
00:1b.0 Class 0403: Device 8086:27d8 (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: snd_hda_intel
00:1d.0 Class 0c03: Device 8086:27c8 (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: uhci_hcd
00:1d.1 Class 0c03: Device 8086:27c9 (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: uhci_hcd
00:1d.2 Class 0c03: Device 8086:27ca (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: uhci_hcd
00:1d.3 Class 0c03: Device 8086:27cb (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: uhci_hcd
00:1d.7 Class 0c03: Device 8086:27cc (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: ehci_hcd
00:1e.0 Class 0604: Device 8086:244e (rev e1)
00:1f.0 Class 0601: Device 8086:27b0 (rev 01)
Subsystem: Device 103c:2a50
00:1f.1 Class 0101: Device 8086:27df (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: ata_piix
00:1f.2 Class 0104: Device 8086:27c3 (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: ahci
00:1f.3 Class 0c05: Device 8086:27da (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: i801_smbus
01:00.0 Class 0300: Device 1002:7181
Subsystem: Device 1462:0400
Kernel driver in use: radeon
01:00.1 Class 0380: Device 1002:71a1
Subsystem: Device 1462:0401
02:01.0 Class 0c00: Device 11c1:5811 (rev 70)
Subsystem: Device 103c:2a50
Kernel driver in use: firewire_ohci
02:03.0 Class 0200: Device 10ec:8139 (rev 10)
Subsystem: Device 10ec:8139
Kernel driver in use: 8139too
02:04.0 Class 0280: Device 1814:0201 (rev 01)
Subsystem: Device 1814:2560
Kernel driver in use: rt2500pci
02:08.0 Class 0200: Device 8086:27dc (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: e100
ip link
00:00.0 Class 0600: Device 8086:2770 (rev 02)
Subsystem: Device 103c:2a50
00:01.0 Class 0604: Device 8086:2771 (rev 02)
Kernel driver in use: pcieport
00:1b.0 Class 0403: Device 8086:27d8 (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: snd_hda_intel
00:1d.0 Class 0c03: Device 8086:27c8 (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: uhci_hcd
00:1d.1 Class 0c03: Device 8086:27c9 (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: uhci_hcd
00:1d.2 Class 0c03: Device 8086:27ca (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: uhci_hcd
00:1d.3 Class 0c03: Device 8086:27cb (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: uhci_hcd
00:1d.7 Class 0c03: Device 8086:27cc (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: ehci_hcd
00:1e.0 Class 0604: Device 8086:244e (rev e1)
00:1f.0 Class 0601: Device 8086:27b0 (rev 01)
Subsystem: Device 103c:2a50
00:1f.1 Class 0101: Device 8086:27df (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: ata_piix
00:1f.2 Class 0104: Device 8086:27c3 (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: ahci
00:1f.3 Class 0c05: Device 8086:27da (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: i801_smbus
01:00.0 Class 0300: Device 1002:7181
Subsystem: Device 1462:0400
Kernel driver in use: radeon
01:00.1 Class 0380: Device 1002:71a1
Subsystem: Device 1462:0401
02:01.0 Class 0c00: Device 11c1:5811 (rev 70)
Subsystem: Device 103c:2a50
Kernel driver in use: firewire_ohci
02:03.0 Class 0200: Device 10ec:8139 (rev 10)
Subsystem: Device 10ec:8139
Kernel driver in use: 8139too
02:04.0 Class 0280: Device 1814:0201 (rev 01)
Subsystem: Device 1814:2560
Kernel driver in use: rt2500pci
02:08.0 Class 0200: Device 8086:27dc (rev 01)
Subsystem: Device 103c:2a50
Kernel driver in use: e100
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:1a:92:de:71:43 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.2/24 brd 192.168.0.255 scope global eth0
inet6 fe80::21a:92ff:fede:7143/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:e0:4c:39:00:07 brd ff:ff:ff:ff:ff:ff
4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:90:4b:d6:30:8a brd ff:ff:ff:ff:ff:ff
ip route
default via 192.168.0.1 dev eth0
192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.2
As you can see currently I have the onboard LAN card enabled and connected to the network, the Realtek card isn't connected to the network and nor is the wireless card. I only re-anabled the onboard card to test to make sure that it wasn't a problem with the Realtek card, and it doesn't seem to be.
I have copied all my data across the network onto my server without a problem, therefore it seems to be just a problem accessing the internet. Because all my data is now sat on my server it means I can do a completely fresh install onto this computer but i know that isn't really the Linux way
This machine does dual boot with windows so I might boot into window to see if the problem happens when using that.
Similar Messages
-
Hello!
I'm experiencing a weird issue regarding wired networking in the moment on my ThinkPad X220 4290w1b running Windows 7.
Here's the full story: When Windows Update offered me a new driver for my LAN Adapter I did not hesitate and installed it.
That is when the trouble began. I cannot connect to my LAN anymore, Windows (nearly, will explain that later) always tells me that there is no cable plugged in and the status LEDs (on the port you plug the cable in) remain completely inactive.
I checked the cable with my sisters Laptop: Works.
I tried using a different cable and port on the router: Does not work. I made sure that the Router/Cable has no error with another PC.
My guess is that Windows Update didn't do its job well. So I thought I could do better: Unfortunately, installing the newest driver from the Lenovo Homepage does not solve the problem. I tried multiple ways: manually deleting the LAN Adapter from Windows Device Manager before installation..., I also tried a driver from the Intel Homepage.
There were two times though when the problem seemed to be solved: I deinstalled the LAN Adapter in device manager and installed the Lenovo driver afterwards, so that the device was detected again. After waiting for some minutes (no idea why that has an impact oO) everything works like a charm. After a reboot the problem comes back though.
I updated all other drivers and also the BIOS, but it did not solve the problem, too.
I would be very glad if the problem could be resolved and thank everyone in advance for any help!
Kind regards, Guenselmann
PS: Sorry for any language mistakes. I tried my best, but I'm still not a native speaker.First of all, sorry for the wall of text. Somehow the formatting got lost. Edited it.
Thank you for trying to help.
I checked the cable again with another Laptop. It is definitely capable of delivering 1Gbps. It is cat 6, 30 metres long and quite new, if that is of any interest.
I also tried a different cable: Same result.
Your tip was really good though: I forced the driver to 100Mbps Full Duplex, and it works. This is no permanent solution for me though, since I will soon be streaming a lot of data to a NAS.
So I started playing around with the other available options (i.e. activating/deactivating them one by one, which is quite annoying^^).
When I disable "IPv4-Prüfsummen abladen" (using german Windows, translates to "deploy/drop IPv4 checksums"), 1Gbit/s works. It also works if I disable PME or change many other variables (e.g. Priority and VLAN). I can even revert the changes and it still works until I do a cold reboot (I mean plugging the power off and in after turning off Windows).
There must be something wrong oO
If anyone has an idea what the problem might be, feel free to tell me!
I will post more information if I notice anything.
Kind regards, Guenselmann -
Wired and wireless network problem
I have an Airport Extreme setup with an 20" imac connected thru ethernet. I also have a 17" Macbook Pro connected wireless. Both have no problems connecting to the internet but I want to be able to talk to each other. I checked and the wired network has a different subnet then the wireless one. I would like to have them both on the same subnet but I can't seem to find a setting in my airport extreme that will allow me to change that.. The wired network seems to be the same subnet as the assigned address from my ISP. I only have 1 address from my ISP so the airport is not acting like a switch it is routing the data just creating a internal network based on the ip from the ISP. The wireless is handing out ip address that I have setup in the DHCP section.
Message was edited by: Chadwick-PHmmmm
It sounds like you have your AirPort Extreme configured to be in bridge mode? Is this the case?
If it is the case, then you can configure it to "share a single IP address" and then both the wired 20" iMac and the MBP would get DHCP addresses on the same subnet....
If your Airport Extreme is already setup to share a single IP address then the two stations really ought to have IP addresses from the same subnet. Perhaps one of more of them has a static IP and is not setup to use DHCP? -
I have attempted to update my software over 10 times but I get a network connection error. Anyone with the same problem? Got it on the wireless and wired network.
Disable all Firewalls & Anti-Virus software...try again.
-
P1102w with USB, wired network print problems
Net work is a wired LAN, all workstations run Windows XP SP3
Installed Laserjet P1102w using USB cable. Turned sharing on. Was able to install P1102w on other workstations as wired network printer - But can not print from network work stations - document just sits in print que - Printing from the station printer is hardwired (USB) to works fineAll workstations need to have the printer software installed.
If that does not work, make sure the firewall (on the host and/or remote) stations are not blocking access to the printer. Windows software is usually not the problem, it is more often the antivirus software's firewall. Disable it and retest.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Error 306 on win7 wired network, but no problem on laptop on same network, wirelessly
iTunes on a wired network is not working correctly. Internet connection in all other areas is working. When running iTunes, update notification works, downloads updated version, but I keep getting the error 306 message when trying to update apps.
The icons are all blank or have blue question marks.
On the same network, just wirelessly, my laptops iTunes works perfectly.
TCP/IP settings are identical on both.Windows is absolutely passing the buck, and what is more, they are doing it in hopes that we will pass them more bucks- Windows 7 offered a program (for free) that was called windows media center. Windows 8 does not have this however, they will suggest
that it you pay an additional $99.99 to upgrade to windows pro and THEN another $9.99 for windows media center, all will be fine in the media sharing department....
UNTRUE-
I have Windows 8 and fresh out of the box, I got an app called XBox Smartglass with my new (and supposedly improved) OS, Windows 8. Therefore, it is an OS issue, not a manufacturing issue or an Xbox issue or where ever else you may want to stream your
media to.
However, for whatever reason, I have been able to share media without upgrading or paying anything with not one, but two Xbox's...It has something to do with permissions, sharing, devices, networks...but don't ask me what, I truly, truly wish I could help
everyone...however, I just do not want windows weaseling more money out of already high paying customers.
Sometimes I right click on a pie of media and I receive a 'Play To' option. Sometimes that options offers me to 'Play To' 'The Dark Box' or 'Xbox 360' or one but not the other or; my personal favorite- the 'Play To' option is gone and the only option
is to 'Open With' the various media outlets on my PC but not stream it anywhere...and there is no rhyme or reason or setting that makes this consistent.
I wish I could help more, but I leave you with this- It is possible, It does have to do with Windows OS, and you do not have to pass anymore bucks their way to make it happen... -
Weird problem with lat 120l wired network with Linksys WRT54g ver 5
when I use the wired network adapter on my latitude 120l
broadcom 440x 10/100 integrated controller driver ver 4.60.0 11/21/2006
when connected directly to the router the router consantly reboots until i unplug the laptop
wireless works fine I just do not use it when I am in the same room where my router is
the router is a linksys WRT54g ver 5 fw ver 1.02.5
Latitude 120l --- linksys WRT54g
i have to connect it though either a switch or hub then the router
works fine this way
Latitude 120l --- Linksys EZXS88W ---- Linksys WRT54g
i disable the wireless when not using itThis is a hardware issue. have you tried different ports on the router.
-
I work in an office building with free Wifi to connect to the Internet. I want to be able to use this internetconnection, but at the same time I want to shield of my own wired network.
I've made the following configuration:
- fritz adsl modem / router
- Airport Extreme (5th gen) set up to join existing wireless network (green light, works)
- Lan-cable from lan-port AE to wan-port TC (4th gen)
- Lan-cable from TC to Mac
- Lan-cable from TC to Printer
When I set my TC (network-settings) in bridge-mode everything works fine, but my Mac and Printer get an IP-address from the fritz modem / router and are visible to others.
I tried to set TC in NAT/DHCP-mode, but then I get the error message that I should set a static IP-adress for TC. When I set TC in DHCP-mode, it looses connection to the AE. I'm not sure what to do now. Does anyone know how to set up my TC and create my own private network and still be able to get on the internet?Hajenius wrote:
Is there a better alternative? I'd rather not want to reset my TC every day.
You are using free internet.. so there is a price to pay.. that is convenience and non-ideal network setup.
The better alternative is to pay for your own connection. Then you are completely free of the possibility of others in the bullding seeing your connection. (as long as you secure the wireless).
But I think you are probably over worrying about public wifi.. if it is setup right.. ask the building admins.. it should be setup so each user cannot see another users connection. This is typical for most wifi setup and simply means you can see internet connection but nobody else on the connection. ie other wireless users.
Having a router with NAT makes it then more secure again and allows clients on your own network to interact with each other. But you can setup wireless to the free wifi for every client.. (depending on how many IP you are allowed).. and run a secondary network without internet access. This is easy for desktop etc where you have a wireless and a wired connection but less convenient for mobile devices.. unless you use a cloud connection and each client can link and share via that.
Have I made the explanation worse??
Think of it this way.. if you had 3 laptops.. all 3 could connect to the internet from the building wifi.. but they cannot talk to each other or share resources in local office. You can put resources out in the cloud, that can be shared.. but that adds traffic and most free services are not fast.
Now you can also plug all three into Time Capsule by ethernet.. and share local resources. Files, printers backup etc. This network is not connected to the internet at all. Each laptop has internet via free wifi and local connection.
For devices like iphones that have no ethernet or other method.. you could use local wireless and public wireless.. but in turns.. still the only advantage is less issues with double NAT.. if that causes problems.. then this is an alternative. -
Network problems after update; system reinstall not fixing it.
Hello, first post here ^^
Sorry if I write with a bit of engrish. I'm very tired ^^"
My brother's laptop, a Portuguese Classmate PC (aka "Magalhães", version MG2 -- unfortunately, I can't find the corresponding international version, but have a picture) doesn't has any network at all, be it wired or wireless, with the updates of 3/August/2011 installed. I think the problem is udev.
I have no problems when using an installation media, at least for wired network.
Even after reinstalling, I still have no network.
Wired
The problem with wired, is that the eth0 interface is gone. Have tried network and NetworkManager, and it's just gone. In the output of ifconfig I only have the loopback interface (and would have wlan0, if I had the firmware for the wireless card installed).
Wired problem solved! Sorry, I actually searched the Internet for a solution and couldn't find anything useful, and only now noticed there's already a thread here about it. I should have searched this forum, instead of the Internet... sorry!
Wireless
Previously, I only had to install the rtl8192se chipset drivers from AUR.
But now, with the latest updates, the kernel [size=1](or the udev, I don't know which it is)[/size]was constantly giving me errors through tty, regarding to wifi. It could scan for networks, but not connect. I have tried with WPA and no security, result was the same.
Config files and logs
/etc/rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="pt_PT.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="localtime"
TIMEZONE="Europe/Lisbon"
KEYMAP="pt-latin1 pt-latin9 euro"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=(mii r8169 pcspkr snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel soundcore)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="MTomas"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(syslog-ng dbus network netfs @openntpd crond cups alsa gdm)
hwdetect --show-net
NET : ppp_generic slhc rfkill
dmesg (sorry about the very long output, I don't really know whats' useful or not...)
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f5c0000 (usable)
[ 0.000000] BIOS-e820: 000000003f5c0000 - 000000003f5cc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f5cc000 - 000000003f5cf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f5cf000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Intel Corporation Intel powered classmate PC/Intel powered classmate PC, BIOS BPPNV20L.90A.0008.2010.0909.1822 09/09/2010
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3f5c0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 0C0000000 write-back
[ 0.000000] 1 base 03F600000 mask 0FFE00000 uncachable
[ 0.000000] 2 base 03F800000 mask 0FF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f7d40] f7d40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000003f5c0000
[ 0.000000] 0000000000 - 003f400000 page 2M
[ 0.000000] 003f400000 - 003f5c0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3f5c0000 @ 3f5bd000-3f5c0000
[ 0.000000] RAMDISK: 37c12000 - 37e01000
[ 0.000000] ACPI: RSDP 00000000000f7d10 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003f5c5013 00074 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003f5cbc60 000F4 (v03 INTEL 06040000 PTL 00000002)
[ 0.000000] ACPI: DSDT 000000003f5c61a9 05A43 (v01 INTEL BEARG31A 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003f5cefc0 00040
[ 0.000000] ACPI: TCPA 000000003f5cbd54 00032 (v01 Phoeni x 06040000 TL 00000000)
[ 0.000000] ACPI: MCFG 000000003f5cbd86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 000000003f5cbdc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 000000003f5cbdfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003f5cbe62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 000000003f5cbe8a 00176 (v01 JPSCSA _JPSCSA_ 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 000000003f5c5609 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5563 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003f5c5087 004DC (v02 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003f5c0000
[ 0.000000] NUMA: Using 63 for the hash shift.
[ 0.000000] Initmem setup node 0 0000000000000000-000000003f5c0000
[ 0.000000] NODE_DATA [000000003f5b8000 - 000000003f5bcfff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003dc00000-ffff88003e9fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0003f5c0
[ 0.000000] On node 0 totalpages: 259405
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3920 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3493 pages used for memmap
[ 0.000000] DMA32 zone: 251931 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88003f200000 s83136 r8192 d23360 u1048576
[ 0.000000] pcpu-alloc: s83136 r8192 d23360 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 255851
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/f2bdff34-f924-4065-ad3d-051016d84be2 rootfstype=ext4 ro add_efi_memmap
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1011404k/1038080k available (4019k kernel code, 460k absent, 26216k reserved, 3335k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptable hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.531 MHz processor.
[ 0.003340] Calibrating delay loop (skipped), value calculated using timer frequency.. 3326.60 BogoMIPS (lpj=5541770)
[ 0.003531] pid_max: default: 32768 minimum: 301
[ 0.003952] Security Framework initialized
[ 0.004047] AppArmor: AppArmor disabled by boot time parameter
[ 0.004419] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.007667] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.008243] Mount-cache hash table entries: 256
[ 0.009502] Initializing cgroup subsys ns
[ 0.009600] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.009736] Initializing cgroup subsys cpuacct
[ 0.009925] Initializing cgroup subsys memory
[ 0.010064] Initializing cgroup subsys devices
[ 0.010158] Initializing cgroup subsys freezer
[ 0.010249] Initializing cgroup subsys net_cls
[ 0.010340] Initializing cgroup subsys blkio
[ 0.010565] CPU: Physical Processor ID: 0
[ 0.010656] CPU: Processor Core ID: 0
[ 0.010743] mce: CPU supports 5 MCE banks
[ 0.010839] CPU0: Thermal monitoring handled by SMI
[ 0.010849] using mwait in idle threads.
[ 0.012451] ACPI: Core revision 20110316
[ 0.023363] ftrace: allocating 15966 entries in 63 pages
[ 0.026783] Setting APIC routing to flat
[ 0.027287] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061420] CPU0: Intel(R) Atom(TM) CPU N455 @ 1.66GHz stepping 0a
[ 0.063329] APIC calibration not consistent with PM-Timer: 359ms instead of 100ms
[ 0.063329] APIC delta adjusted to PM-Timer: 1039059 (3740601)
[ 0.063329] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[ 0.063329] ... version: 3
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.080180] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.106732] Booting Node 0, Processors #1 Ok.
[ 0.106880] smpboot cpu 1: start_ip = 98000
[ 0.006666] CPU0: Thermal monitoring enabled (TM1)
[ 0.203381] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.210009] Brought up 2 CPUs
[ 0.210112] Total of 2 processors activated (6652.11 BogoMIPS).
[ 0.210657] devtmpfs: initialized
[ 0.217499] PM: Registering ACPI NVS region at 3f5cc000 (12288 bytes)
[ 0.221762] print_constraints: dummy:
[ 0.222075] NET: Registered protocol family 16
[ 0.222464] ACPI: bus type pci registered
[ 0.222965] PCI: MMCONFIG for domain 0000 [bus 00-10] at [mem 0xe0000000-0xe10fffff] (base 0xe0000000)
[ 0.223102] PCI: MMCONFIG at [mem 0xe0000000-0xe10fffff] reserved in E820
[ 0.225887] PCI: Using configuration type 1 for base access
[ 0.226974] bio: create slab <bio-0> at 0
[ 0.229126] ACPI: EC: Look up EC in DSDT
[ 0.237091] ACPI: SSDT 000000003f5c5ed2 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.237853] ACPI: Dynamic OEM Table Load:
[ 0.238022] ACPI: SSDT (null) 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.238519] ACPI: SSDT 000000003f5c5868 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.239233] ACPI: Dynamic OEM Table Load:
[ 0.239401] ACPI: SSDT (null) 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.240151] ACPI: SSDT 000000003f5c60d5 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.240891] ACPI: Dynamic OEM Table Load:
[ 0.241061] ACPI: SSDT (null) 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.241466] ACPI: SSDT 000000003f5c5e4d 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.242187] ACPI: Dynamic OEM Table Load:
[ 0.242357] ACPI: SSDT (null) 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.243484] ACPI: Interpreter enabled
[ 0.243588] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.243922] ACPI: Using IOAPIC for interrupt routing
[ 0.255265] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.263625] ACPI: No dock devices found.
[ 0.263714] HEST: Table not found.
[ 0.263800] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.265505] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.265765] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.266086] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.266668] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.270174] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.270276] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.270400] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.270524] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.270647] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.270772] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.270898] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xf7ffffff]
[ 0.271021] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xfdff]
[ 0.271118] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.271263] pci 0000:00:00.0: [8086:a010] type 0 class 0x000600
[ 0.271320] pci 0000:00:02.0: [8086:a011] type 0 class 0x000300
[ 0.271335] pci 0000:00:02.0: reg 10: [mem 0xf0200000-0xf027ffff]
[ 0.271346] pci 0000:00:02.0: reg 14: [io 0x18d0-0x18d7]
[ 0.271356] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.271366] pci 0000:00:02.0: reg 1c: [mem 0xf0000000-0xf00fffff]
[ 0.271410] pci 0000:00:02.1: [8086:a012] type 0 class 0x000380
[ 0.271424] pci 0000:00:02.1: reg 10: [mem 0xf0280000-0xf02fffff]
[ 0.271531] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.271559] pci 0000:00:1b.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.271649] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.271659] pci 0000:00:1b.0: PME# disabled
[ 0.271694] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.271793] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.271802] pci 0000:00:1c.0: PME# disabled
[ 0.271842] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.271935] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.271944] pci 0000:00:1c.1: PME# disabled
[ 0.271983] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.272082] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.272091] pci 0000:00:1c.2: PME# disabled
[ 0.272136] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.272197] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f]
[ 0.272257] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.272338] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f]
[ 0.272398] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.272459] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f]
[ 0.272511] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.272596] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f]
[ 0.272670] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.272701] pci 0000:00:1d.7: reg 10: [mem 0xf0504000-0xf05043ff]
[ 0.272808] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.272817] pci 0000:00:1d.7: PME# disabled
[ 0.272848] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.272944] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.273056] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.273215] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.273244] pci 0000:00:1f.2: reg 10: [io 0x18e8-0x18ef]
[ 0.273259] pci 0000:00:1f.2: reg 14: [io 0x18dc-0x18df]
[ 0.273274] pci 0000:00:1f.2: reg 18: [io 0x18e0-0x18e7]
[ 0.273289] pci 0000:00:1f.2: reg 1c: [io 0x18d8-0x18db]
[ 0.273304] pci 0000:00:1f.2: reg 20: [io 0x18c0-0x18cf]
[ 0.273334] pci 0000:00:1f.2: reg 24: [mem 0xf0504400-0xf05047ff]
[ 0.273383] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.273391] pci 0000:00:1f.2: PME# disabled
[ 0.273418] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.273494] pci 0000:00:1f.3: reg 20: [io 0x18a0-0x18bf]
[ 0.273613] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.273709] pci 0000:00:1c.0: bridge window [io 0x0000-0x0000] (disabled)
[ 0.273718] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.273730] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.273884] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200
[ 0.273955] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.274076] pci 0000:03:00.0: reg 18: [mem 0xf0520000-0xf0520fff 64bit pref]
[ 0.274148] pci 0000:03:00.0: reg 20: [mem 0xf0510000-0xf051ffff 64bit pref]
[ 0.274199] pci 0000:03:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.274363] pci 0000:03:00.0: supports D1 D2
[ 0.274368] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274387] pci 0000:03:00.0: PME# disabled
[ 0.274568] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.274663] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.274672] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.274685] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.274782] pci 0000:04:00.0: [10ec:8172] type 0 class 0x000280
[ 0.274812] pci 0000:04:00.0: reg 10: [io 0x3000-0x30ff]
[ 0.274832] pci 0000:04:00.0: reg 14: [mem 0xf0100000-0xf0103fff]
[ 0.274954] pci 0000:04:00.0: supports D1 D2
[ 0.274960] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.274970] pci 0000:04:00.0: PME# disabled
[ 0.280025] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.280144] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.280152] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.280164] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280266] pci 0000:00:1e.0: PCI bridge to [bus 11-11] (subtractive decode)
[ 0.280369] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.280378] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.280390] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.280397] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.280404] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.280411] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.280417] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.280424] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.280431] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.280438] pci 0000:00:1e.0: bridge window [mem 0x40000000-0xf7ffffff] (subtractive decode)
[ 0.280445] pci 0000:00:1e.0: bridge window [io 0x0d00-0xfdff] (subtractive decode)
[ 0.280451] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.280490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.280660] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.280757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.280849] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.280941] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.281235] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.281497] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.281828] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.282049] ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20110316/dsfield-143)
[ 0.282310] ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003d1b1a50), AE_ALREADY_EXISTS (20110316/psparse-536)
[ 0.282632] Unable to assume _OSC PCIe control. Disabling ASPM
[ 0.297275] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.297984] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.298679] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.299375] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.300108] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.300923] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.301740] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.302444] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.303298] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.303339] vgaarb: loaded
[ 0.303656] PCI: Using ACPI for IRQ routing
[ 0.303746] PCI: pci_cache_line_size set to 64 bytes
[ 0.303778] pci 0000:00:1b.0: address space collision: [mem 0xf0500000-0xf0503fff 64bit] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.303990] pci 0000:00:1d.7: address space collision: [mem 0xf0504000-0xf05043ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304159] pci 0000:00:1f.2: address space collision: [mem 0xf0504400-0xf05047ff] conflicts with PCI Bus 0000:03 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.304389] reserve RAM buffer: 000000000009dc00 - 000000000009ffff
[ 0.304395] reserve RAM buffer: 000000003f5c0000 - 000000003fffffff
[ 0.304709] NetLabel: Initializing
[ 0.304793] NetLabel: domain hash size = 128
[ 0.304878] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.304991] NetLabel: unlabeled traffic allowed by default
[ 0.305112] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.305216] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.305468] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.316700] Switching to clocksource hpet
[ 0.319651] Switched to NOHz mode on CPU #0
[ 0.319806] Switched to NOHz mode on CPU #1
[ 0.333572] pnp: PnP ACPI init
[ 0.333697] ACPI: bus type pnp registered
[ 0.335270] pnp 00:00: [bus 00-3f]
[ 0.335277] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.335283] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.335289] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.335295] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.335301] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.335307] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.335312] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.335318] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.335324] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.335329] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.335335] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.335341] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.335346] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.335352] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.335358] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.335363] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.335369] pnp 00:00: [mem 0x40000000-0xf7ffffff window]
[ 0.335375] pnp 00:00: [io 0x0d00-0xfdff window]
[ 0.335381] pnp 00:00: [mem 0x00000000 window]
[ 0.335386] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.335514] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.335756] pnp 00:01: [io 0x0010-0x001f]
[ 0.335763] pnp 00:01: [io 0x0024-0x0025]
[ 0.335768] pnp 00:01: [io 0x0028-0x0029]
[ 0.335773] pnp 00:01: [io 0x002c-0x002d]
[ 0.335778] pnp 00:01: [io 0x0030-0x0031]
[ 0.335783] pnp 00:01: [io 0x0034-0x0035]
[ 0.335788] pnp 00:01: [io 0x0038-0x0039]
[ 0.335793] pnp 00:01: [io 0x003c-0x003d]
[ 0.335798] pnp 00:01: [io 0x0072-0x0077]
[ 0.335803] pnp 00:01: [io 0x0080]
[ 0.335808] pnp 00:01: [io 0x0090-0x009f]
[ 0.335813] pnp 00:01: [io 0x00a4-0x00a5]
[ 0.335818] pnp 00:01: [io 0x00a8-0x00a9]
[ 0.335823] pnp 00:01: [io 0x00ac-0x00ad]
[ 0.335827] pnp 00:01: [io 0x00b0-0x00b5]
[ 0.335832] pnp 00:01: [io 0x00b8-0x00b9]
[ 0.335837] pnp 00:01: [io 0x00bc-0x00bd]
[ 0.335842] pnp 00:01: [io 0x0800-0x080f]
[ 0.335848] pnp 00:01: [io 0x1000-0x107f]
[ 0.335853] pnp 00:01: [io 0x1180-0x11bf]
[ 0.335858] pnp 00:01: [io 0x002e-0x002f]
[ 0.335869] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.335874] pnp 00:01: [io 0xfe00]
[ 0.335879] pnp 00:01: [io 0x0068-0x0077]
[ 0.335884] pnp 00:01: [io 0x0200-0x020f]
[ 0.335889] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.335895] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.335900] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[ 0.335906] pnp 00:01: [mem 0xfef00000-0xfeffffff]
[ 0.336082] system 00:01: [io 0x0800-0x080f] has been reserved
[ 0.336183] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.336278] system 00:01: [io 0x1180-0x11bf] has been reserved
[ 0.336373] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.336468] system 00:01: [io 0xfe00] has been reserved
[ 0.336560] system 00:01: [io 0x0200-0x020f] has been reserved
[ 0.336656] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.336798] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.336897] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.336996] system 00:01: [mem 0xfef00000-0xfeffffff] has been reserved
[ 0.337098] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.337130] pnp 00:02: [io 0x0000-0x000f]
[ 0.337136] pnp 00:02: [io 0x0081-0x008f]
[ 0.337141] pnp 00:02: [io 0x00c0-0x00df]
[ 0.337147] pnp 00:02: [dma 4]
[ 0.337215] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.337242] pnp 00:03: [io 0x00f0-0x00fe]
[ 0.337263] pnp 00:03: [irq 13]
[ 0.337336] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.337431] pnp 00:04: [io 0x0070-0x0071]
[ 0.337445] pnp 00:04: [irq 8]
[ 0.337513] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.338017] pnp 00:05: [io 0x03f8-0x03ff]
[ 0.338032] pnp 00:05: [irq 4]
[ 0.338239] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.338320] pnp 00:06: [io 0x0061]
[ 0.338392] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.338454] pnp 00:07: [mem 0xfed40000-0xfed44fff]
[ 0.338534] pnp 00:07: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[ 0.338562] pnp 00:08: [io 0x0060]
[ 0.338567] pnp 00:08: [io 0x0064]
[ 0.338581] pnp 00:08: [irq 1]
[ 0.338653] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.338686] pnp 00:09: [irq 12]
[ 0.338759] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.339063] pnp 00:0a: [mem 0xff800000-0xffffffff]
[ 0.339151] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.339574] pnp: PnP ACPI: found 11 devices
[ 0.339666] ACPI: ACPI bus type pnp unregistered
[ 0.349216] pci 0000:00:1c.1: BAR 14: assigned [mem 0x40000000-0x400fffff]
[ 0.349328] pci 0000:00:1b.0: BAR 0: assigned [mem 0x40100000-0x40103fff 64bit]
[ 0.349464] pci 0000:00:1b.0: BAR 0: set to [mem 0x40100000-0x40103fff 64bit] (PCI address [0x40100000-0x40103fff])
[ 0.349606] pci 0000:00:1d.7: BAR 0: assigned [mem 0x40104000-0x401043ff]
[ 0.349710] pci 0000:00:1d.7: BAR 0: set to [mem 0x40104000-0x401043ff] (PCI address [0x40104000-0x401043ff])
[ 0.349849] pci 0000:00:1f.2: BAR 5: assigned [mem 0x40104400-0x401047ff]
[ 0.349950] pci 0000:00:1f.2: BAR 5: set to [mem 0x40104400-0x401047ff] (PCI address [0x40104400-0x401047ff])
[ 0.350115] pci 0000:00:1c.2: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.350248] pci 0000:00:1c.0: BAR 14: assigned [mem 0x40400000-0x405fffff]
[ 0.350352] pci 0000:00:1c.0: BAR 15: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.350483] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.350580] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.350673] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.350773] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.350874] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.351009] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0540000-0xf055ffff pref]
[ 0.351133] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.351225] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.351324] pci 0000:00:1c.1: bridge window [mem 0x40000000-0x400fffff]
[ 0.351425] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.351558] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.351649] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.351749] pci 0000:00:1c.2: bridge window [mem 0xf0100000-0xf01fffff]
[ 0.351850] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.351981] pci 0000:00:1e.0: PCI bridge to [bus 11-11]
[ 0.352070] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.352164] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.352258] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.352370] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.352482] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.352586] pci 0000:00:1c.0: setting latency timer to 64
[ 0.352607] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.352709] pci 0000:00:1c.1: setting latency timer to 64
[ 0.352728] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.352830] pci 0000:00:1c.2: setting latency timer to 64
[ 0.352844] pci 0000:00:1e.0: setting latency timer to 64
[ 0.352853] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.352859] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352865] pci_bus 0000:00: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352871] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352877] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352883] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.352890] pci_bus 0000:00: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.352896] pci_bus 0000:00: resource 11 [io 0x0d00-0xfdff]
[ 0.352902] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.352908] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.352914] pci_bus 0000:02: resource 1 [mem 0x40400000-0x405fffff]
[ 0.352921] pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.352927] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.352933] pci_bus 0000:03: resource 1 [mem 0x40000000-0x400fffff]
[ 0.352940] pci_bus 0000:03: resource 2 [mem 0xf0500000-0xf05fffff 64bit pref]
[ 0.352946] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.352952] pci_bus 0000:04: resource 1 [mem 0xf0100000-0xf01fffff]
[ 0.352959] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.352966] pci_bus 0000:11: resource 4 [io 0x0000-0x0cf7]
[ 0.352972] pci_bus 0000:11: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.352978] pci_bus 0000:11: resource 6 [mem 0x000d0000-0x000d3fff]
[ 0.352984] pci_bus 0000:11: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.352990] pci_bus 0000:11: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.352996] pci_bus 0000:11: resource 9 [mem 0x000e0000-0x000e3fff]
[ 0.353002] pci_bus 0000:11: resource 10 [mem 0x40000000-0xf7ffffff]
[ 0.353009] pci_bus 0000:11: resource 11 [io 0x0d00-0xfdff]
[ 0.353015] pci_bus 0000:11: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.353230] NET: Registered protocol family 2
[ 0.353666] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.354759] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.356562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.357461] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.357565] TCP reno registered
[ 0.357677] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.357790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.358526] NET: Registered protocol family 1
[ 0.358655] pci 0000:00:02.0: Boot video device
[ 0.358843] PCI: CLS 32 bytes, default 64
[ 0.358970] Unpacking initramfs...
[ 0.422600] Freeing initrd memory: 1980k freed
[ 0.424221] Simple Boot Flag at 0x36 set to 0x1
[ 0.425202] audit: initializing netlink socket (disabled)
[ 0.425328] type=2000 audit(1312465475.423:1): initialized
[ 0.426137] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.431274] VFS: Disk quotas dquot_6.5.2
[ 0.431768] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.432308] msgmni has been set to 1979
[ 0.433016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.433243] io scheduler noop registered
[ 0.433398] io scheduler deadline registered
[ 0.433626] io scheduler cfq registered (default)
[ 0.433955] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.434029] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.434158] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.434222] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.434347] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.434410] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.434777] intel_idle: MWAIT substates: 0x20220
[ 0.434799] intel_idle: v0.4 model 0x1C
[ 0.434803] intel_idle: lapic_timer_reliable_states 0x2
[ 0.434847] Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 0.435010] ERST: Table is not found!
[ 0.435250] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.456560] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.674724] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.727052] Linux agpgart interface v0.103
[ 0.727338] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.731303] i8042: Detected active multiplexing controller, rev 1.1
[ 0.734370] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.734541] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.734705] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.734863] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.735024] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.735354] mousedev: PS/2 mouse device common for all mice
[ 0.753576] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.753717] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.753983] cpuidle: using governor ladder
[ 0.754335] cpuidle: using governor menu
[ 0.754959] TCP cubic registered
[ 0.755047] NET: Registered protocol family 17
[ 0.755152] Registering the dns_resolver key type
[ 0.755524] PM: Hibernation image not present or could not be loaded.
[ 0.755541] registered taskstats version 1
[ 0.756395] rtc_cmos 00:04: setting system clock to 2011-08-04 13:44:36 UTC (1312465476)
[ 0.756612] Initializing network drop monitor service
[ 0.760092] Freeing unused kernel memory: 712k freed
[ 0.760552] Write protecting the kernel read-only data: 6144k
[ 0.761521] Freeing unused kernel memory: 60k freed
[ 0.768916] Freeing unused kernel memory: 784k freed
[ 0.773948] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.824947] udevd[74]: starting version 173
[ 0.877923] SCSI subsystem initialized
[ 0.935196] libata version 3.00 loaded.
[ 0.956774] ahci 0000:00:1f.2: version 3.0
[ 0.956824] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.957043] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.957186] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.957352] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 0.957485] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.964648] scsi0 : ahci
[ 0.965831] scsi1 : ahci
[ 0.966239] scsi2 : ahci
[ 0.966607] scsi3 : ahci
[ 0.967366] ata1: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104500 irq 43
[ 0.967524] ata2: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104580 irq 43
[ 0.967680] ata3: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104600 irq 43
[ 0.967831] ata4: SATA max UDMA/133 abar m1024@0x40104400 port 0x40104680 irq 43
[ 1.286817] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.286986] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.287140] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.287285] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.296743] ata1.00: ATA-8: SAMSUNG HM250HI, 2AC101C4, max UDMA/133
[ 1.296845] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.306650] ata1.00: configured for UDMA/133
[ 1.307168] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250HI 2AC1 PQ: 0 ANSI: 5
[ 1.361599] usbcore: registered new interface driver usbfs
[ 1.361788] usbcore: registered new interface driver hub
[ 1.362029] usbcore: registered new device driver usb
[ 1.362890] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.363254] sd 0:0:0:0: [sda] Write Protect is off
[ 1.363390] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.363491] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.371359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.371567] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.371722] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.371734] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.371971] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.393443] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.393567] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.397557] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.397596] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40104000
[ 1.410069] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.410565] hub 1-0:1.0: USB hub found
[ 1.410687] hub 1-0:1.0: 8 ports detected
[ 1.418573] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7
[ 1.420139] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.436350] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.436604] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.436912] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.436925] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.437083] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.450137] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.450657] hub 2-0:1.0: USB hub found
[ 1.450776] hub 2-0:1.0: 2 ports detected
[ 1.451206] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.451346] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.451358] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.451506] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.466851] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.467375] hub 3-0:1.0: USB hub found
[ 1.467491] hub 3-0:1.0: 2 ports detected
[ 1.467949] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.468100] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.468111] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.468263] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.476847] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.477389] hub 4-0:1.0: USB hub found
[ 1.477506] hub 4-0:1.0: 2 ports detected
[ 1.477926] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.478068] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.478080] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.478233] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.486815] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 1.487337] hub 5-0:1.0: USB hub found
[ 1.487454] hub 5-0:1.0: 2 ports detected
[ 1.720183] usb 1-4: new high speed USB device number 2 using ehci_hcd
[ 2.310090] usb 1-7: new high speed USB device number 3 using ehci_hcd
[ 3.346515] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.346624] EXT4-fs (sda2): write access will be enabled during recovery
[ 3.481722] EXT4-fs (sda2): orphan cleanup on readonly fs
[ 3.481844] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572970
[ 3.481970] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572968
[ 3.482041] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 923116
[ 3.482090] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 1572948
[ 3.482130] EXT4-fs (sda2): 4 orphan inodes deleted
[ 3.482225] EXT4-fs (sda2): recovery complete
[ 4.287281] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.547177] udevd[278]: starting version 173
[ 5.875278] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.875984] ACPI: AC Adapter [AC0] (off-line)
[ 5.881017] ACPI: acpi_idle yielding to intel_idle
[ 5.888339] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0D:00/input/input1
[ 5.939985] ACPI: Lid Switch [LID]
[ 5.940983] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0C:00/input/input2
[ 5.941147] ACPI: Power Button [PWRB]
[ 5.941583] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 5.941763] ACPI: Sleep Button [SLPB]
[ 5.942546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.942697] ACPI: Power Button [PWRF]
[ 5.943413] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.943529] ACPI: Thermal Zone [TZ01] (24 C)
[ 5.972400] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 5.972588] ACPI: Battery Slot [BAT1] (battery present)
[ 5.995124] agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
[ 5.995453] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[ 5.995846] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 5.999895] iTCO_vendor_support: vendor-support=0
[ 6.012373] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 6.124751] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 6.125083] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x1060)
[ 6.125348] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.190412] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.194157] tpm_tis 00:07: 1.2 TPM (device-id 0xFE, rev-id 70)
[ 6.215082] Initializing USB Mass Storage driver...
[ 6.215469] usbcore: registered new interface driver usb-storage
[ 6.215586] USB Mass Storage support registered.
[ 6.267697] usb 1-7: USB disconnect, device number 3
[ 6.269402] Linux media interface: v0.10
[ 6.271745] scsi4 : usb-storage 1-7:1.0
[ 6.278594] usbcore: registered new interface driver ums-realtek
[ 6.324583] usbcore: registered new interface driver uas
[ 6.361274] Linux video capture interface: v2.00
[ 6.416800] uvcvideo: Found UVC 1.00 device USB Camera (5986:02a8)
[ 6.435626] input: USB Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input5
[ 6.435979] usbcore: registered new interface driver uvcvideo
[ 6.436094] USB Video Class driver (v1.0.0)
[ 6.516768] [drm] Initialized drm 1.1.0 20060810
[ 6.632026] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.657529] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.657663] i915 0000:00:02.0: setting latency timer to 64
[ 6.729787] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 6.729799] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.729904] [drm] Driver supports precise vblank timestamp query.
[ 6.805456] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.805960] [drm] initialized overlay support
[ 6.965295] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000
[ 7.013599] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 7.142190] fbcon: inteldrmfb (fb0) is primary device
[ 7.190534] Console: switching to colour frame buffer device 128x37
[ 7.197352] fb0: inteldrmfb frame buffer device
[ 7.197461] drm: registered panic notifier
[ 7.197660] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110316/video-1148)
[ 7.198144] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 7.198602] ACPI: Video Device [IGD0] (multi-head: yes rom: no post: no)
[ 7.199927] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 8.736636] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 8.833668] EXT3-fs: barriers not enabled
[ 8.856596] kjournald starting. Commit interval 5 seconds
[ 8.859646] EXT3-fs (sda4): using internal journal
[ 8.862624] EXT3-fs (sda4): mounted filesystem with ordered data mode
[ 9.026943] Adding 2096444k swap on /dev/sda6. Priority:-1 extents:1 across:2096444k
[ 18.281512] NET: Registered protocol family 10
[ 21.591928] EXT4-fs (sda2): re-mounted. Opts: commit=600
[ 35.750474] fuse init (API version 7.16)
[ 201.029607] PPP generic driver version 2.4.2
[ 3255.955029] EXT4-fs (sda2): re-mounted. Opts: commit=0
[10041.892469] usb 1-1: new high speed USB device number 4 using ehci_hcd
[10042.021338] scsi5 : usb-storage 1-1:1.0
[10043.026686] scsi 5:0:0:0: Direct-Access TOSHIBA MK1234GSX PQ: 0 ANSI: 2
[10043.031863] sd 5:0:0:0: Attached scsi generic sg1 type 0
[10043.036190] sd 5:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[10043.041825] sd 5:0:0:0: [sdb] Write Protect is off
[10043.045147] sd 5:0:0:0: [sdb] Mode Sense: 38 00 00 00
[10043.045157] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.052676] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.064806] sdb: sdb1
[10043.071939] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[10043.075091] sd 5:0:0:0: [sdb] Attached SCSI disk
[10089.898154] EXT3-fs (sdb): error: can't find ext3 filesystem on dev sdb.
[10089.913066] EXT4-fs (sdb): VFS: Can't find ext4 filesystem
[10089.936439] FAT: invalid media value (0xb9)
[10089.939320] VFS: Can't find a valid FAT filesystem on dev sdb.
EDIT: ls -l /etc/modprobe.d
total 16
-rw-r--r-- 1 root root 30 Ago 4 04:57 blacklist_net.conf
-rw-r--r-- 1 root root 182 Ago 4 04:57 blacklist_sound.conf
-rw-r--r-- 1 root root 55 Jun 25 15:30 modprobe.conf
-rw-r--r-- 1 root root 196 Abr 8 11:08 usb-load-ehci-first.conf
Thanks in advance for any help.
Last edited by JohnTH (2011-08-04 16:31:18)The kernel outputs many error messages when I start NetwrokManager, and persists even when I stop it
Here is part of a dmesg:
[ 587.134444] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 587.135365] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 587.136337] HW_VAR_MRC: Turn on 1T1R MRC!
[ 587.553458] pwrdown, 0x6(BIT6)=f1
[ 589.566485] pwrdown, 0x6(BIT6)=f1
[ 591.573163] pwrdown, 0x6(BIT6)=f1
[ 593.579828] pwrdown, 0x6(BIT6)=f1
[ 595.586517] pwrdown, 0x6(BIT6)=f1
[ 597.593183] pwrdown, 0x6(BIT6)=f1
[ 599.599777] pwrdown, 0x6(BIT6)=f1
[ 601.606490] pwrdown, 0x6(BIT6)=f1
[ 603.613185] pwrdown, 0x6(BIT6)=f1
[ 605.619843] pwrdown, 0x6(BIT6)=f1
[ 607.626506] pwrdown, 0x6(BIT6)=f1
[ 609.633150] pwrdown, 0x6(BIT6)=f1
[ 611.639785] pwrdown, 0x6(BIT6)=f1
[ 613.646491] pwrdown, 0x6(BIT6)=f1
[ 615.653171] pwrdown, 0x6(BIT6)=f1
[ 617.659839] pwrdown, 0x6(BIT6)=f1
[ 619.666513] pwrdown, 0x6(BIT6)=f1
[ 621.673175] pwrdown, 0x6(BIT6)=f1
[ 623.679774] pwrdown, 0x6(BIT6)=f1
[ 625.686507] pwrdown, 0x6(BIT6)=f1
[ 627.693176] pwrdown, 0x6(BIT6)=f1
[ 629.699826] pwrdown, 0x6(BIT6)=f1
[ 631.706480] pwrdown, 0x6(BIT6)=f1
[ 633.713169] pwrdown, 0x6(BIT6)=f1
[ 635.719785] pwrdown, 0x6(BIT6)=f1
[ 637.726499] pwrdown, 0x6(BIT6)=f1
[ 639.733146] pwrdown, 0x6(BIT6)=f1
[ 641.739824] pwrdown, 0x6(BIT6)=f1
[ 643.746489] pwrdown, 0x6(BIT6)=f1
[ 645.753149] pwrdown, 0x6(BIT6)=f1
[ 647.010241] pwrdown, 0x6(BIT6)=f1
[ 647.135295] rtl8192_SetWirelessMode(), wireless_mode:10, bEnableHT = 1
[ 647.136216] InitializeAdapter8192SE(): Set MRC settings on as default!!
[ 647.137240] HW_VAR_MRC: Turn on 1T1R MRC!
[ 647.753447] pwrdown, 0x6(BIT6)=f1
[ 649.766491] pwrdown, 0x6(BIT6)=f1
[ 651.773160] pwrdown, 0x6(BIT6)=f1
[ 653.779830] pwrdown, 0x6(BIT6)=f1
Can somebody help me? -
MBP takes long time to restore wired network connection after wake-up
Hello...
My Mid-2010 MBP (MacBookPro6,2) has been experiencing this problem recently -- Whenever I wake up the computer from sleep, it needs approximately 10 seconds to restore its wired network connection. I know there are other annoying connection issues with MBP's WiFi/AirPort out there, but I'm talking about the wired connection here.
Maybe some don't even think this slowness is a problem at all, but this laptop used to be network-ready right after wake-up until 3~4 months ago. That was around the time when I upgraded to SSD and changed some settings via pmset, not sure if that's the culprit. It is now running OS X 10.8.5 and its pmset settings are:
Battery Power:
lidwake 1
ttyskeepawake 1
hibernatemode 3
gpuswitch 2
hibernatefile /var/vm/sleepimage
displaysleep 2
sleep 15
acwake 0
halfdim 1
sms 0
lessbright 1
disksleep 10
AC Power:
lidwake 1
ttyskeepawake 1
hibernatemode 0
gpuswitch 2
hibernatefile /var/vm/sleepimage
womp 1
displaysleep 10
networkoversleep 0
sleep 60
acwake 0
halfdim 1
sms 0
disksleep 0
I'd appreciate help of any kind
Thanks,
zuoyMaybe try this, i am not sure that it will resolve the problem, but it is worth trying anyways.
http://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/eef49e64-157c-4082-8e80-52e48309691f
Hi All,
I've seen this problem multiple times, especially with Windows 7 64-bit versions and Enterprise edition. The source of the problem appears to be the Bonjour service that is installed in the background and set to "Automatic" when installing certain 3rd
party applications. Apple applications like iTunes and Adobe applications like Acrobat Professional and Creative Suites have been known to cause this problem. I've also seen virtualization software like VMWare and VirtualBox cause similar issues
with network adapters.
The solution in most of the cases I've come across has been to stop and disable the Bonjour service. The Bonjour service also masquerades as a service with a name of the format "##Id_String1.6844F930_blahblahblah". Here's how to disable this service
in Windows 7:
Right-Click on Computer > Select 'Manage'
Expand the 'Services and Applications' section in the bottom of the Left-Nav dialog and Select 'Services'
Sort the Services list by name and look for either "Bonjour" or the "##Id_String..." name mentioned above
Right-Click on the service and select 'Properties'
Click the 'Stop' button to stop the service
Select 'Disabled' from the 'Startup type' drop down list
Click 'Apply' and then 'OK'
Reboot your machine and see if the "Multiple Networks" issue is resolved. If so, you should have internet connectivity again.
Hope this helps.
cheers,
Aaron -
Can't reinstall Officejet Pro 8000 A809N driver on wired network
Computer is running Windows XP with service pack 3 and all updates installed. When I tried to print two days ago, I received an error message that no printer was installed. I had printed earlier in the week without problems. I checked the Printer and Faxes folder in Control Panel, and it was empty. I believe it normally showed the HP printer as well as a Windows Fax print-to-file routine there.
When I clicked on Add a Printer in the Printer folder, I was told that the Print Spooler was not running. I ran "services.msc" from the Run command, and restarted the Print Spooler. I went back to the Printer folder, tried to reinstall the printer, and again it said the Print Spooler was not running. I restarted the Print Spooler again, and tried to look at Server Properties from the Printer folder file tab, and again it said the Print Spooler was not running (it is set to automatic restart). I've checked several related dll and exe files against their backups, and they don't appear to be corrupted. I scanned the hard drive for errors, and none were found.
I tried the built-in diagnostics of the HP software, and all I got was error messages that the Print Spooler was stopped. I came to the HP website, downloaded and installed two additional troubleshooting programs, which did not help. HP Home Network Diagnostic Utility says "software not installed", although nothing had been deleted, and still ran from the Start menu. HP Print Diagnostic Utility 4.1 states there is an issue with the print spooler, and to click "Fix". Clicking Fix opens a window stating to select the printer to troubleshoot, then press "Diagnose". No printer appears in the list though, so it states to install the software.
Therefore, I downloaded both the full and the limited install programs from the website and tried both several times. I ran the uninstall program of the existing installation from the Start menu without problems and rebooted. When I tried to reinstall though, I kept getting errors. Generally, the "hpnwchk" program (HP network check) opens in a dos screen, displays a long string of "Printer : (null)" lines, then crashes. The program then tells me that the printer is already installed to the TCP/IP port, and needs to be removed first. I click the option to "Fix" the TCP/IP port option. The installation program then continues, and brings up a window showing the correct information for my printer (it even wakes it from the standby mode). I select the printer from the list, and the install continues until receiving another error, stating that "arguments are incorrect", and that the installation has failed. I think the "arguments" are setting for the TCP/IP port, which differ between what it is being set from the current drivers and what was previously installed.
I've run the uninstall routine several times, and also manually deleted the printer folder from the registry using REGEDIT (HKCU/Printer). It seems to me that there is a conflict somewhere that keeps stopping the print spooler (it is set to auto restart). Also, the uninstall routine is not completely uninstalling, as it always says that the printer is already installed when I run the installation routines, and displays it's correct parameters. I Googled and read just about everything I can find on the subject, and I'm stumped. Where else could the TCP/IP settings be stored in the Registry, and what else is being missed on the uninstall?
Some additional information on my setup - the printer has been installed for about 2 years with no issues. I can still print without problems from another computer on our home wired network. I opened Vista on this very computer on a separate drive partition, and had no trouble installing and using the printer through Vista, which seems to eliminate any possible hardware issues (I never found it worth the effort to move over to Vista after trying it; only use it now as a back-up to XP on the computer). In the past week, I installed an update for Adobe Reader, and Microsoft Security Essentials stopped a Java Script Trojan. I believe Windows also installed it's monthly anti-virus update. All virus scans have been negative. Beyond that, there has been no other hardware or software changes.
This question was solved.
View Solution.I found a solution to the problem, through early morning inspiration. I thought as everything disappeared from the Printer folder, and kept being told that the printer was installed, that I would delete and reinstall other drivers that may (or may not) have been in the folder. I seemed to recall that I had the generic Fax driver installed, and the Microsoft XPS Document Writer installed. I went to "Add/Remove Windows Components", and deleted Fax Services. I then went to the Printer file, clicked Add a Printer, and didn't receive the error message that the Print Spooler wasn't running, ect. I then had no problem reinstalling the HP printer, Fax, and XPS drivers.
-
Airport Extreme wired network can't assign IP address, but wireless works
*Problem details:*
We have three computers intermittently on, wired into the ethernet LAN managed by the Airport Extreme.
We have a few more computers that connect to the wireless network managed by the same Airport Extreme.
As far as I know, no fancy settings hijinks have been attempted. I manage the router, and I only plugged the Airport into the cable modem and connected all the wires to the computers. The WiFi setup went a similar way -- I just turned it on and it sorted itself out. This was eight months ago, mind you -- everything has been going quite well up until this weekend.
But! I got home from a trip this weekend to discover that all the machines that connected over the wired network could no longer get a connection to the internet. Any machine connected over the wireless network, however, was working just fine. Indeed, my macbook pros couldn't even see the Airport Extreme when I turned off their WiFi, connected them over Ethernet and opened the Airport Extreme configuration app!
The wired machines complain that they have a self-assigned IP address. Sometimes, after resetting everything, they look like everything's fine for a moment. Like I said, ordinarily my macbook pro does not even recognize the router over the wired network. However, after reverting to factory defaults and restarting the Airport, the laptop did see it (until a few minutes went by and it realized something was wrong).
I figured that renewing my DHCP lease would fix this problem, but it did not. Nor did turning off Passive FTP Mode (PASV) under Proxies in the Network configuration pane.
I have tried resetting the router to factory defaults, power cycling the modem and router in various configurations, etc. but nothing has worked. In addition, I have verified that connecting any machine to the ethernet directly from the modem will work, so the problem is definitely being introduced by the Airport Extreme.
So I guess my question is: what do I have to poke to return everything to normal? I'd like working wired and wireless networks again.
*Some last few details:*
The Airport is running 7.5.2, but downgrading to 7.4.2 produced no tangible difference.
I have an Ubee D3.0 modem. All lights are green and blinky except the DS light, which is solid amber (and it is green when the modem is wired directly to one of my computers -- it's only amber when connected to the Airport).
Some of the machines that can't connect to the wired network are PCs, so it's not just an OSX thing.
My roommate's XBOX 360 can connect to the internet over the wired port. It doesn't have WiFi, so I'm pretty sure there's no way it could be fooling me.
Thanks in advance for any advice you can muster.
EDIT FOR APOLOGIES:
I didn't realize I was posting this in the "Airport for Windows" section. While a Windows computer's connection is a concern, I would much rather get my Macs online and deal with that first. I can't figure out how to move the message myself.*An update:*
Several days later, this issue seems to have fixed itself. I suspect there may have been Funny Business on my ISP's end (but then again, it's an ISP). -
Wired Network conputer cannot find host printer
I cannot print to host printer on a home wired network.
Printer is HP Photosmart 7520 e all in one.
Host Compter is a Dell Dimension 8100
Pentium 4 1.3 GHz 2.0 GB RAM
Windows XP SP3 host computer.
Netgear N600 Dual Band Router
Model WNDR3400
Network Computer:
Nobilis
Pentium 4 dual core 2.8 GHz
2.5 GB RAM
Linux Mint 17 OS
Both computers share the internet without any problems. The Dell computer prints without any problems. The Dell computer properties 'share this printer' box is checked. I cannot find any IP address for the printer. When I printed out the printer configuration sheet, no IP address was given. When I go to the Control Center->Printers->local-host on the Linux OS, it says it is 'connected to local-host' and 'There are no pinters configured yet'. I then selected 'Add' to add a printer. A 'New Printer' screen comes up and ask to 'Select Device' and also 'Enter URI'. This is where I am stopped in my tracks since I have no 'URI'. Under the 'select device' side there are several options: LPT #1, Serial Port #1, Enter URI, and 'Network Printer'. If Network Printer is selected a dropdown list appears: The main heading is "Find Network Printer'. Selecting 'Find Network Printer' gives various internet protocols (ipp, ipps, https, ipp14, LPD/LPR Host or Printer, Windows printer via Samba, and APP Socket/HP Direct.
The Dell computer has alway worked fine and without problems (XP OS) on any HP printer.
This is where I am stymied! Can someone help me from here.Can you see the Windows computers when browsing from GO > Connect to server?
Anything different in network connection - you use wireless, they use ethernet, for example? -
Intermittent wired network connection on HP OfficeJet Pro 8600
I've searched the forums and I haven't seen a problem/solution quite like I am experiencing, so I am starting a new thread.
I have a HP OfficeJet Pro 8600 that will only keep an intermittent connection to my router. Lately, it has been more often not than connected. I usually have to disconnect and connect the Ethernet cable to the back of the printer several times before it will show a connection, and then, only for a little while before it drops the connection again. When connected, everything works fine (printing, faxing, scanning).
When the printer is disconnected, the network status has a yield sign with an exclamation point inside. There are no blinking lights on the back where the network cable connects. When it connects (by me plugging and unplugging), the lights start flickering. I've tried several cables including known good ones to rule that possibility out. Cycling the power has no consistent affect. The router is otherwise working fine.
Here are other details that might help:
Model: HP OfficeJet Pro 8600 (N911a)
Firmware: up-to-date
Software drivers: up-to-date
Router: CISCO E3200
Connection: wired network
Static IP address reserved (not connecting with DHCP)
MAC filtering off
Main Computer: Windows 7 Service Pack 1
Wired Connection to the router
Can someone suggest a solution? My best guess is that the network card in the printer is bad, but I am willing to try an easier solution. Thanks.Hi, are there any other peripherals using the RJ45 ports on the router?
Are you using a static IP address for the 8600?
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee. -
HP Photosmart Premium c309g Wired Network Issues
I've been struggling with this thing since I installed it a month ago. It prints, usually, but for the most part the performance over the wired network is slooooowwwww. In some cases it may take 5 minutes just for the printer to get itself activated. Other times it won't even print at all until I reboot my desktop (wired into router) and log back into my user account. Then suddenly, the printout will appear. Performance from a wireless laptops is the same.
I figured a wired setup would be simple as I didn't need the wireless setup. The printer is connect directly to my DSL modem/router. I get my wireless to my laptop by Netgear router coming off one of the DSL modem ports. The wireless access point has a static IP. The DSL wired router has DHCP running.
Unless I can find some knowledgeable help in here I think I'll be forced to go back to a USB connection and share it thru my desktop. Something I'd like to avoid if possible. Let me know what information anyone needs and I'll supply it.
One more thing to add because it just happened. After turning the printer off/on it sat there for about 3 minutes. Then suddenly it got some request to print something. However, no client sent it a print request.
Thanks..PrintDoc,
I have made the following changes based upon your recommendations.
- Removed HP printer and desktop network cable from Actiontec DSL modem/router and plugged them into the Netgear wireless router (WNDR3400) port 2 and 3.
- Ran one network cable from port 1 on the Actiontec to port 1 on the Netgear. Port 1 is NOT the WAN on the Netgear.
- Verified Netgear and Actiontec have the latest firmware (they already did)
Here are the settings for the Actiontec
- DHCP off
- OpenDNS as DNS servers
- LAN IP 192.168.0.1
- Netmask 255.255.255.0
Here are the settings for the Netgear
- DHCP on (range 192.168.0.2 - 192.168.0.254)
- Static IP 192.168.111.2
- Netmask 255.255.255.0
- Gateway IP 192.168.111.1
- LAN IP 192.168.0.100
- Netmask 255.255.255.0
- OpenDNS as DNS servers
Here are the settings for the HP printer
- Name: OldGlory
- DHCP on
- OpenDNS as DNS servers
I can connect my 2 laptops, smartphone, Internet radio, and Internet connectible TV with no problems on the wireless signal. The desktop and the printer have no problems connecting either. After I configured it all last nite I did have it all working properly (so it seemed).
So the desktop and the printer sat on overnite and I attempted to print something this morning from a Stamps.com application I have installed on the desktop. The print was sent and I did notice it in the printer icon in the taskbar start up. However, when I opened that icon up to check the status, there was no port called out. As a result nothing was printed. Funny because a port is defined in the printer properties Port tab in Windows.
I logged off and then logged back in and still no print. I then rebooted the desktop and then upon login, the print came out of the printer. This is the typical behavior when things have sat over nite. I checked the printer configuration and I have energy saving mode turned off.
Does this help diagnose?
Please advise...Thanks...
Maybe you are looking for
-
Error when reading the data of infoprovider
Hello, I have a problem when excecuting the transaction 'listcube' on a specific infocube. It occurs an error message which complains problem when reading the data of the infoprovider. The message text sounds as follows: Error reading the data of Inf
-
In LAYMANS terms, please, what exactly does Automator do?
-
Canon EOD Rebel sl1 (100d) raw photo's (.cr2) cannot be read in aperture. How can I make dat?
How can I read my photo's from my Canon Eos 100d (Rebel sl1) in aperture. The extension is .cr2. The extension from my photo's from my Canon 5D Mark III are .cr2 as well, but i can read those in aperture.
-
Looking at Softwares, Can someone answer some quesitons about Captivate?
Hey all, I am looking at training software for a pretty big project and wanded to check with those who actually use it to see if Captivate would fit my needs as wel as what I found using the website: Is the UI Developer friendly? Does it have Multime
-
[solved] External drive automatically mounted as read-only
Hi folks, I have a strange issue with an external drive automatically mounted as read-only whenever I plug it to my laptop : [sclarckone@archLaptop ~]$ mount /dev/sdb1 on /run/media/sclarckone/dd type ntfs (ro,nosuid,nodev,relatime,uid=1000,gid=100,f