Wireless Drivers... Error :/

Hello all!!!. I Was able to Install a Full Arch Linux Install including a Full GUI (GNOME). Now i'm installing this on a MacBook Pro so this is INTEL hardware. I'm running the x86_64 version. Now im trying to install my Wireless drivers (Broadcom BCM312) Now i was able to compile and install YAY!. Using Makepkg and Pacman install method. Now following this guide to install http://wiki.archlinux.org/index.php/Broadcom_BCM4312 . I Now to do these following commads
# modprobe lib80211_crypt_tkip
# modprobe wl
# insmod /lib/modules/2.6.33-ARCH/kernel/drivers/net/wireless/wl.ko
Now when i do this command i get the following error in Terminal: WARNING: /etc/modprobe.d/modprobe.conf line 5: ignoring bad line starting with 'MODULES=(!snd_pcsp). Im getting this for "modprobe lib80211_crypt_tkip"
now when i do this command i get the following error in Terminal: WARNING: /etc/modprobe.d/modprobe.conf line 5: ignoring bad line starting with 'MODULES=(!snd_pcsp)'. Im Getting this for "modprobe wl"
and Last but not least when i do this command i get the Follow error in Terminal: insmod: error inserting '/lib/modules/2.6.33-ARCH/kernel/drivers/net/wireless/wl.ko': -1 File exists. And im getting this for "insmod /lib/modules/2.6.33-ARCH/kernel/drivers/net/wireless/wl.ko". Please assist!
Thanks! And this is my Offical first post in Arch Linux Forums ::)

Correct - no bumping. See here for details on this and other guidelines for using this forum.
Re your issue - the first message is quite clear IMO. Line 5 of your modprobe.conf is not in the correct format i.e. it's a bad line, so modprobe is ignoring it. It also says it is a warning, not an error. If you want it to go away, fix line 5.
The second message is an error, due to a mistake on that wiki page. Use either modprobe or insmod (preferably modprobe) to load the wl driver, but not both.

Similar Messages

Broadcom 4311 Wireless Drivers error

Okay, sorry for going super newbie on everything. First off, I checked both Arch Installation guides. I checked the Broadcom section in the wiki. I'm trying to install arch linux on an old (2007) Lenovo 3000 c100 laptop, to revive it and make it better. However it had a broadcom driver which I know isn't supported by Linux. Luckily for me, there was a driver for it: http://www.broadcom.com/support/802.11/linux_sta.php on that page. I download the 32-bit and put it on a flash drive, since I don't have an internet connection from it, and used mount to mount the flash drive. After trying to install the driver through pacman, it said the package was either "invalid" or "corrupted'. Just great. I tried doing many different things. Including re-downloading. Same. I really appreciate any help. thanks

Did you use the AUR package or the tar ball. Because I find that using the tar ball it doesn't get the module working correctly sometimes. Your best bet would be to do this download this file http://aur.archlinux.org/packages/broad … -wl.tar.gz
Then run the following commands
tar zxvf broadcom-wl.tar.gz
cd broadcom-wl
makepkg -si
Then run these commands
rmmod b43 ssb
modprobe wl
Then make sure you black list b43 and ssb in your rc.conf file and add wl to your modules in your rc.conf and if you are going to be using encryption then also add lib80211_crypt_tkip.

Trying to patch my wireless drivers, kernal issues.

Im trying to patch my wireless drivers while following http://www.aircrack-ng.org/doku.php?id=compat-wireless
Now heres what my issue is, in the make file it looks for my directory "/usr/src/linux-3.8.*-1-ARCH", it uses "uname -a" to do so, but what ive ran into is that that folder is alway 1 number ahead of my actual kernel version.
EX:
uname -a shows me:
3.8.5-1-ARCH
While the only folder i have in /usr/src is:
/usr/src/linux-3.8.6-1-ARCH/
So its 6-1 when in reality my kernal is 5-1.
I went in and manually edited that since i knew that would be no biggie, then when i ran "make" as normal user it came up with this new error:
make[3]: *** [/home/dyzaster/Downloads/compat-wireless-3.6.8-1/drivers/bcma/main.o] Error 1
make[2]: *** [/home/dyzaster/Downloads/compat-wireless-3.6.8-1/drivers/bcma] Error 2
make[1]: *** [_module_/home/dyzaster/Downloads/compat-wireless-3.6.8-1] Error 2
make[1]: Leaving directory `/usr/src/linux-3.8.6-1-ARCH'
make: *** [modules] Error 2
So with this thread i have 2 questions, first off, is it normal for the folder and kernel version to be off like that? Im assuming no, and if not then how do i fix that? And most importantly what is this error and what do i do at this point?
Thank you for any and all feedback
~The Dyzaster

lucke wrote:
You probably didn't paste the line which has the actual error.
The page you linked to is for older kernels, it links to http://drvbp1.linux-foundation.org/~mcg … t-drivers/, which has stuff for the 3.8 kernel.
There are some compat-drivers packages in AUR.
What patch(es) are you trying to apply?
I need to patch 2 drivers:
rtl8192cu (Which is a USB Dongle)
and
iwlwifi (Build in Athros wifi card+Bluetooth)
And i would rather use source for this then use the AUR, just to make sure its correct.
I dont see 3.8.6-1 there, because im sure you know more then i do about the kernel, which version should i use? "compat-drivers-3.8-1", or "compat-drivers-3.8-1-u"?
Last edited by Dyzaster (2013-04-09 18:32:51)

Need wireless drivers for Satellite A100-259

Hi
Had to reformat my daughters laptop (A100-259 PSAA2) due to virus issues and am in the process of rebuilding it. Almost there but can't seem to get the wireless bit to work. Nothing appears in the system tray even when it's switched on (little switch on the right has the light on). I assume because i've reinstalled XP that i need to reinstall the wireless drivers but i can't seem to find them on the toshiba web site (http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK). It only shows the Atheros management utility.
Any advice would be greatly appreciate especially as i'm pretty new to this kind of stuff and she has lost the manual that came with the laptop.
many thanks
Norrie

Hi!
I dont know why no WLAN drivers are available for this A100 model and Windows XP but you can search for an other A100 model (for example Satellite A100 PSAA8).
Then you will find an Atheros WLAN driver for Windows XP and it should also work.
Bye

HP all in one ms237 cant get wireless drivers to work

Hi i have a HP all in one PC, ive had this PC for a very long time, we upgraded to windows 8 and i dont remember how but i did manage to get wireless drivers on it at one point. the PC's hard drive went out and so i bought a new one and re-installed windows 8 (64 bit) onto it and now i cant get wireless drivers to get installed on it. I tried running the drivers with windows 7 compatability but no dice. I also tried different versions of the driver and still no luck, device manager will see the wireless card but says its not working properly (driver issue) the weird thing is that when i uninstall the drivers for it i can see the adapter in adpater settings, however when i install newer drivers and it goes back to being non existent lol. Any ideas?

Hello @rapid3642,
I understand that you are having issues getting your wireless to work on your HP Pavilion All-in-One MS237 Desktop PC running Windows 8. As you probably have already figured out there are no Windows 8 drivers for your computer. I can see why you would have issues installing Windows 7 drivers on a Windows 8 computer. What you probably did initially was upgrade your Windows 7 to Windows 8 with the driver already installed. Unlike a new Windows 8 installation where you need to install the drivers an upgrade will already have drivers installed and the operating system is simply replacing what is needed without having to go through the installation process.
I would recommend that you either install your original Windows 7 and then upgrade to Windows 8 or you may want to look at replacing the 802.11 b/g/n PCI express wireless half-length mini card with one that is compatible with Windows 8.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Scientific Linux On G50 Laptop No Wireless Drivers

I bought a brand new G50 laptop with a core i5 intel processor for my business as I do with every computer I installed scientific linux and the wireless drivers aren't available.
I need to find some that will work in a bad way.

Maybe try System76: http://system76.com/index.php?cPath=28
I think they use open source drivers for everything, except the ones with Nvidia cards that probably use the closed source Nvidia drivers (not a problem on Arch obviously). I've heard a lot of good things about System76, and they even sent me free Ubuntu stickers
EDIT: Looks like they use "Intel Wi-Fi Link 5100" for wireless, at least on the one that I checked. Here's more info: http://wiki.archlinux.org/index.php/Wir … 000-series The firmware it talks about I belive is available on the Install CD as long as you tell it to install, or of course with pacman (duh).
Look at the "Windows" button
Last edited by doorknob60 (2009-08-08 01:06:47)

Microsoft OLE DB Provider for ODBC Drivers error '80040e10'

Getting the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e10'
[Microsoft][ODBC driver for Oracle]Wrong number of parameters
I have a Stored Procedure within a package that has no input parameter and 2 output parameters..
oConnEngineer.CursorLocation = 3
     oConnEngineer.Open sConnectionString
     oCmdEngineer.ActiveConnection = oConnEngineer
     oCmdEngineer.CommandText = "{Call ENG_TAILORMADE.USER_PKG.GET_ENGINEER_LIST(?,{resultset 100, out_ENGINEER_ID, out_ENGINEER_NAME})}"
     oCmdEngineer.CommandType = 1
     Set rsEngineers = oCmdEngineer.Execute()
Any suggestions?

Getting the following error:
Microsoft OLE DB Provider for ODBC Drivers error '80040e10'
[Microsoft][ODBC driver for Oracle]Wrong number of parameters
I have a Stored Procedure within a package that has no input parameter and 2 output parameters..
oConnEngineer.CursorLocation = 3
     oConnEngineer.Open sConnectionString
     oCmdEngineer.ActiveConnection = oConnEngineer
     oCmdEngineer.CommandText = "{Call ENG_TAILORMADE.USER_PKG.GET_ENGINEER_LIST(?,{resultset 100, out_ENGINEER_ID, out_ENGINEER_NAME})}"
     oCmdEngineer.CommandType = 1
     Set rsEngineers = oCmdEngineer.Execute()
Any suggestions?

Is there an installation ISO with preloaded wireless drivers?

I have no access to cabled networking right now, and I want to install Arch.

The installation ISO has a standard Arch kernel, which includes many wireless drivers. But if you need an additional driver that is ot provided by the kernel, you will need to build it yourself.
Maybe instead of just indicating that you have no networking, it would be better to actually indicate what kinds of problems you are having, including what kind of hardware you have, whether you have found that it is supported by Linux or not, and whether this hardware is actually detected in a Linux environment.
There is a saying about there never being bad questions, but I have to clarify that there can certainly be very poorly formatted questions. Around here, if you want help, you need to be much much more explicit and show that you've taken some initiative in trying to find some information yourself.

Thinkpad Edge 14 0578 Wireless Drivers

Hello, had issues with my Win 7, decided to roll over to vista momentarily. Clean install.
Now lost wireless drivers only using the laptop through the Ethernet. Installed Think vantage system update, but did not auto download Wi-Fi drivers. Only Bluetooth
Please where to pin point the correct drivers. See screenshot below

Hi LWhitacre,
Welcome to Lenovo Community!
As per your query we understood that you are willing to replace the HDD to SSD drive on ThinkPad Edge 14.
We regret to inform you that ThinkPad Edge 14 will not support SSD.
To view the detailed specification on the hardware please click the below link.
Detailed specifications - ThinkPad Edge 14
Click here to open a link where you can select the country and get the exact contact support number of your region. I’m sure they will be a great help.
Hope this helps.
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Senforce 3.2 conflicts with Intel Wireless drivers

Hi, the company I work for is running Senforce 3.2 (the old name for Endpoint Security). It is conflicting with the Intel Wireless drivers in a batch of new laptops (both trying to start/stop the drivers at same time).
Would like to know if anyone has seen similar behaviour, or what a possible solution might be.
Many thanks.

simonbarron,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Wireless drivers for toshiba satelite C850-F228

I RECENTLY INSTALLED WINDOW 7 ULTIMATE ON MY TOSHIBA satelite C850-F228 LAPTOPBUT IT WAS UNFORTUNATE ON MY PART THAT THE WIRELESS DRIVERS COULDNT INSTLLED UPON SEVERAL DRIVERS ATTEMPT..PLEASE HELP...THANK YOU satelite C850-F228WINDOW 7 ULTIMATE

Satelite C850-F228 (PSKC8F-08N00TF3)
We support only US computers at this site.
This driver should be the right one.
Realtek Wireless Lan Driver for Windows 7 - 64 Bit, 2.00.0020, 24/09/13
But you probably need to set up the motherboard first by installing the Intel chipset and display software.

Premire elements11 dislay drivers error.

Premiere elements 11 display drivers error:
I cannot solve the problem with getting the drivers warning when trying to start Premiere E 11. Then the programme crashes, I have tried everything suggested in these forums. Remove baddrivers.txt (reappears each time I try to open PE 1). I have rolled back to old drivers, loaded the very latest drivers from the AMD website, Reinstalled PE 11, even tried a trial of PE13. Updated windows, turned ff everything else, virus checker etc
I have a W7 64 bit PC with an AMD Radeon HD6670 graphics card, latest drivers - 15 sep 14.
Despite all combinations of the above the programme throws up a incompatible drivers, update them' warning and then crashes.
PE 11 worked fine up until a couple of months ago, so something has gone wrong. Can anyone suggest what else I might be able to try ? I am almost at the point where I shall have to look for an alternative editing software.
Could it be some inner problem with my Windows ? But everything else works fine still, Chkdisc, SFC scannow, etc etc all turn up no errors.
Help !! thanks Alan.

Did you receive any error messages during the installation process? You can check your installation log files to look for errors. Please see Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to locate and interpret the installation log files.

Does the core install media include wireless drivers?

I was originally planning on doing a net install but that would require me to hook up to a wired connection, does the core install media include wireless drivers so I can connect via wireless? I use an intel wireless card that was supported out of the box on my previous arch install, no ndiswrapper or anything like that needed. Thanks in advance.

Firmware for all cards are not available though due to silly licensing.

Cannot update drivers error code 193 on All in one 8500 Win 8.1

Running Win 8.1 updated from 7.. All in One 8500 910A Can do basic printing but no longer have twain support for scanning etc. When trying to update get failure notice error number 193. HP message says they have no further advice

Hi @clamproad ,
I see that you no longer can scan after updating to Windows 8.1. When you try to update, you are getting a failure notice error number 193. I would like to help you resolve this issue.
Did you fully uninstall the old HP Software and try downloading the newest software?
Here are the Full Feature Software Drivers if you haven't installed them.
HP Officejet Pro 8500A e-All-in-One Printer - A910a Drivers.
Select your operating system, click next and click on the software to download and install.
Here is a document on this issue. After Upgrading the Computer to Windows 8.1, the HP Printer Does Not Print and the Printer Software ...
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Wireless sample error

UP.simulater's error code is like this
=> HTML or Plain text,
can't compile this..
phone's information's output is like this
=>
Content-Type: text/html. Content follows:
<?xml version = '1.0' encoding = 'UTF-8'?>
<html xmlns="http://www.w3.org/TR/REC-html40">
End Content-Type: text/html.
index.xsql code is like this
=>
<?xml version="1.0"?>
<?xml-stylesheet type="text/xsl" media="Palm" href="indexPP.xsl"?>
<?xml-stylesheet type="text/xsl" media="Mozilla" href="DeptIndexHTML.xsl"?>
<?xml-stylesheet type="text/xsl" media="UP" href="DeptIndexWML.xsl"?>
what's the problem?

i install ndiswrapper again and now the situation like that:
#ndiswrapper -l
installed drivers:
netrtlx driver installed, hardware (10EC:8169) present (alternate driver: r8169)
#/etc/rc.d/network restart
:: Stopping Network [BUSY] SIOCDELRT: No such process
broadbast: Host name lookup failure
ifconfig: `--help' gives usage information.
[FAIL]
:: Starting network profile: host [DONE]
:: Starting Network [BUSY] SIOCADDRT: File exists
[FAIL]
#iwconfig
lo no wireless extensions.
sit0 no wireless extensions.
wlan0 no wireless extensions.
#nano /etc/rc.conf
lo="lo 127.0.0.1"
wlan0="dhcp"
wlan0="wlan0 192.168.2.145 netmask 255.255.255.0 broadbast 192.168.2.225"
wlan_wlan0="wlan0 host host"
wlan_wlan0="wlan0 host host key $MYPASSWORD"
wlan_wlan0="wlan0 host host key s:wirelesspassword"
WLAN_INTERFACES=(wlan0)
INTERFACES=(lo wlan0)
gateway="default gw 192.168.2.1"
ROUTES=(gateway)
NET_PROFILES=(host)

Wireless Drivers... Error :/

Similar Messages

Maybe you are looking for