Wireless is not automatically detected with rc.conf

Hi guys !
I have the following issue :
I have the wireless drivers PRO/Wireless 2915ABG , ipw2200 . I 've installed the drivers ipw2200-fw . My wireless interface for some reason is not wlan0 but eth1 .
I've tried the automatic setup
/etc/rc.conf
eth0="dhcp"
eth1="dhcp"
wlan_eth1="eth1 essid linksys" #i have no key protection and the ESSID is linksys
INTERFACES=(eth0 eth1)
but it doesn't work .
When i try the manual setup
# iwconfig eth1 essid "linksys"
dhcpcd eth1
everything works fine . I've tried to add the module ipw2200 in /etc/rc.conf but still doesn't work .
Can someone help me how to have automatically wireless connection during boot ?
Thanks for your help !
Last edited by shak (2010-03-29 15:23:26)

Have you tried net-auto-wireless here: /wiki.archlinux.org/index.php/Netcfg
This is what I use and it works fine.

Similar Messages

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i

If you are missing using google maps - try the Nokia map app called "here"

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

If you are missing using google maps - try the Nokia map app called "here"

Windows 8.1 not automatic contact with WSUS

Hi,
I have an issue with WSUS 3.2 , the problem is all windows 8.1 based computer are not automatically contact with wsus as daily basis.
we need to run manually command on windows 8.1 pcs, then they could contact.
Thanks
Arora,Jitender

If you using a Windows Server 2008 R2 make sure that
WSUS-KB2734608-x64 is installed!
If this not solving your problem check also this thread:
https://social.technet.microsoft.com/Forums/windows/en-US/ed0b0865-ae33-437c-9f64-b5d31f8a0f2f/windows-8-pro-wsus-error-800b0001
Kind regards,
Tim
MCITP, MCTS, MCSA
http://directoryadmin.blogspot.com
This posting is provided 'AS IS' with no warranties or guarantees and confers no rights.
"If this thread answered your question, please click on "Mark as Answer"

Adobe Reader does not automatically associate with PDF files in Xp Sp3

I have reinstalled Reader (twice) and it does not automatically associate with PDF files.
How do I fix this problem?
Cheers, JH

The thing is, when I right click a pdf file, and then go to properties, change default program to open with, select browse, I select it in the correct folder, when I click open, it doesnt open and the programs stay blank, so I cant select anything. There is nothing to select. And I have re-installed. But at the end of the install there are no options what file types to associate with. Any way to do it inside Reader?
I have reader 9.2.0. and Win7 up to date. When I'm opening and closing allot of files the whole time, I don't want to do inside reader. Help please?

How do I go about setting up my new wireless all-in-one Epson XP-215 printer to my MacBook Pro? The system is not automatically detecting the printer ad the furthest I get is "System" keychain user and pswd but I am a new user to Mac.

I am a new user to Mac and trying to set up an Epson XP-215 All-in-One printer without any success. The Mac Book Pro is not recogising the Printer automatically and when following the instructions to add the printer, it gets as far as a display box for teh user and password for "System" Keychain but I am not sure what info to add there...
The printer is meant to have a function calle dAir Print also that is meant to be used for Mac but I cannot figure out any of this! Why would the MacBook Pro not automatically pic up the printer? Please help...

If you have not already done so, you should read the user manual that came w/the printer and/or contact Epson tech support.
Check out the following KB Articles:
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
Also check out What to do when you can't print

Wireless does not hold connection with b43 driver!

Hi everybody!!
It's my first time here in the forum, so nice to meet you.
I have a laptop Acer Aspire 3050 and I recently formatted it to install the new Arch 2009.08.
It's pretty cool, but I can't make my wireless card (Broadcom BCM4318) work with b43 driver. It worked very well with Arch 2009.02, but now it's a pain!
It recognizes the driver, loads it and connect with no problems, but when I ping my desktop machine, it says that unfortunate message "Destination Host Unreachable"
It sometimes works when I do these commands about 5 or 10 times:
./connect
ping 192.168.0.1 >>> Destination Host Unreachable
ifconfig wlan0 down
rmmod b43
/etc/rc.d/network restart
modprobe b43
./connect
[... many more times]
but even when it does connect, it usually can't hold the connection for more than 15 or 20 minutes. And I have to do it all again.
Hear goes some info on configuration files so it may help you:
lspci -vk
08:04.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: AMBIT Microsystem Corp. TravelMate 2410
Flags: bus master, fast devsel, latency 64, IRQ 21
Memory at d0200000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
lsmod | grep "b43"
b43 137208 0
mac80211 155532 1 b43
cfg80211 90428 2 b43,mac80211
ssb 45988 1 b43
pcmcia 36168 2 b43,ssb
pcmcia_core 35184 5 b43,yenta_socket,rsrc_nonstatic,ssb,pcmcia
led_class 4000 3 b43,sdhci,acer_wmi
/etc/rc.conf
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!b43 !ndiswrapper)
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
#eth0="dhcp"
INTERFACES=()
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
DAEMONS=(syslog-ng network netfs crond hal)
I've already tried many different configurations in rc.conf, but it still does not estabilish a connection in the first try.
I'm using the driver from the wiki (http://mirror2.openwrt.org/sources/broa … .5.tar.bz2) and did not try with only ndiswrapper. It's because I want to have all functionalities from criptography and... after all, it was supposed to work, wasn't it?
Where could be the problem? The driver version? Or bad configuration?
Thanks in advance!! If you need more information, please ask.

So, the same problem occurred and in a relatively shorter time than before. I began to think that something is causing this problem.
My theory is that it is a VMWare software issue. What I've been doing differently recently is using it in "Unity" mode as opposed to "Full Screen" mode. My guess is that the program is modifying my wireless permissions and screwing it all up.
So, what I've done is set the "Network Adapter" to "Host-Only". This denies the VMWare program internet access but still allows file sharing between the Windows virtual environment and the Mac hard drive.
Then I had to re-install Mac OS X all over again to fix the wireless settings/permissions mess.

My iPad and iPhone do not automatically synch with MS Office 2010 Outlook

My iPhone and iPad should automatically synch with MS Outlook (2010) on my PC. They did before, but now I have to synch manually again and I do not always get all the information synched even then. Help!

Try asking or looking in the dedicated iCloud on my PC forum - this forum is for the iCloud.com website.
Also, try these Apple Support articles:
iCloud: Troubleshooting iCloud Reminders and Tasks
iCloud: Troubleshooting iCloud Contacts
iCloud: Troubleshooting iCloud Calendar
iCloud: Troubleshooting iCloud Mail

TS1398 can i possibly download from iOS 6 back to iOS 5? there are so many glitch with this new iOS 6, iTunes does not automatically syncing with my iPad2. Messages keeps on logging out, I have to log in again and again, including Facebook it is also acti

I am very excited with this ios 6, but now am very regretful that why did i updated my ios because the new ios 6 did not live up to my expectations, Youtube was gone, iTunes cannot automatically sync with my iPad, iMessages is logging out automatically, even facebook is acting wierd. facetime connection is very poor there are so many glitches with this ios 6. And I know that it is impossible for me to turn back safely to ios 5.1.1 now. Are there any suggestions you can give me? I just want my iPad 2 back to its normal and efficient stage again. Thanks

I am sorry to tell you that Apple does not provide a downgrade path for iOS. There are unsupported methods for doing so, but we are forbidden to provide that information on these forums.

Does not automatically detect webcam

Hi
All the latest drivers, Windows updates (SP2), and bootcamp drivers installed. After booting into Bootcamp it does not automatically recognise my Logitech Pro 5000 webcam. If I unplug the webcam and plug back in all is well. Any way I can get it to work straight away?
Aidan

Hi Wsumabat:
I regret that the link didn't work for you. I'm re-posting the complete link instead of the shortened one.
I hope this one works for you.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c02013758#N167
Regards,
Happytohelp01
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Macbook pro not automatically detecting usb wireless extender

From a long distance I'm trying to help a friend get a Wireless Repeater setup on his Macbook Pro. This is a Plug 'N Play piece of equipment that connects through USB. When he plugs it into his Macbook Pro nothing happens and it's not detected at all, however when it's plugged into a PC running Windows 7 the Repeater works without any problems and is immediately detected.
I've suggested he confirm the USB ports are working properly. Based on other forums for similiar issues, with different equipment, I've suggested plugging the Repeater into the computer before turning it on.
Any other suggestions to get it working would be greatly appreciated!!

It depends on the device, but in general, Macs support Plug and Play peripherals. However, USB Wi-Fi extenders are problematic because OS X does not come with drivers for these devices.
If you know the brand of the extender and its model, put it here and I will look for its driver.

Firewire/1394 devices are not auto-detected with k8n neo4 platinum

I am unable to detect firewire/1394 devices to my PC through my K8N Neo4 Platinum. That is, I plug in the device through the firewire port and windows doesn't detect that a device has been plugged in.
I have tried:
-2 firewire devices, both are Canon digital camcorders (ZR10 and ZR25MC)
-2 different firewire cables
-reinstalling windows, got all windows updates except
(Microsoft Base Smart Card Cryptographic Service Provider Package: x86 (KB909520))
-patch from microsoft, discussed here
(https://forum-en.msi.com/index.php?topic=81749.0)
-both firewire devices using both cables connect just fine to a test computer
-both my computer and the test computer have Windows XP Pro SP2
Windows doesn't make the noise "bah-dum" that it has detected a device, nor does it display the dialog that gives me options of what programs to use. Once in a while, if I leave it connected for a while and come back, windows will eventually find it...or windows might bog down and get really slow. It speeds up again instantly once I unplug the firewire device. Strange, I know. Also there are NO conflicts in device manager.
Could it be?:
-bios misconfiguration
-need to use an older chipset driver (i am using most recent from nvidia.com)
-onboard audio or front audio needs to be disabled
-the k8n neo4 platinum simply has connection problems with some firewire devices
(i hope not)
Bob

Built2Last: (good questions!)
I tried your suggestion by removing PCI cards and made FURTHER progress. I found out that my firewire card, the Syba NEC1394-P3, has some compatibility issues with my other PCI cards. I found this out because:
1. it worked fine after I placed it in a non-comm (orange) slot and removed my soundcard (X-Fi) and Belkin wireless modem, and
2. a tech support representative from Syba told me that that particular firewire card has compatibility issues
Quote
Also, SD-NEC-4F is our older model firewire card.
Our new firewire card (SD-PCI-4F) is using VIA VT6306 chipset and no customer complain about any installation issue so far.
If the SD-NEC-4F still giving you trouble, I'll suggest you to return it and exchange for the SD-PCI-4F firewire card.
At least he is honest and wants to help, so I remain impartial towards Syba.
So I figured out the firewire card, but not the onboard firewire. Ok, but check this out! When the Syba card was working, I could plug in BOTH the external hard drive AND either of the Canon camcorders to the Syba firewire card. Windows all three devices just fine. Again, the onboard firewire would ONLY detect JUST the external hard drive, but would not detect either of the Canon camcorders. It seems as though the ball again is knocked back into MSI's court on this issue. Any ideas?
syar2003:
As for drivers, I checked for drivers for: onboard firewire, add-in firewire card, and Canon camcorders.
-I cannot find where there is an MSI firewire driver for my onboard firewire port. I originally guess that it was part of my chipset driver installer, but the README doesn't say anything about it. It is also not an additional download on MSI's website. But since it detects an external hard drive I figure I must already have it.
-The add-in firewire card does not have drivers. I repeat, they do not exist. The manual and Syba's website both state that drivers for the card are included all versions of Windows back to Windows 98.
-Canon's website has a driver/software download page but it also appears that drivers do not exist for the Canon camcorders.
Yes the camcorder is set to VCR mode.
Yes the IEEE1394 is correctly installed, since external hard drive connects okay.
I tried two DV cables and both are connected fine.
The camcorders do not support USB as far as I can see, and if they do, I'm not using it.

My IPhone 5 will not automatically pair with my 2008 Range Rover

I've had every generation of iPhone and I have never had any issues when it come to pairing it with my Range Rover. It seems I have to manually re-pair the phone to the stereo every time I re enter car. Any ideas would be greatly appreciated

Hi there Huskerscott!
I have some information here that can help you troubleshoot this issue:
Unable to automatically connect to Wi-Fi
Avoid giving your Wi-Fi network a common name.
Some wireless routers are preconfigured with a common SSID (network name) such as "wireless" or "default."
If your desired Wi-Fi network has a common SSID, try changing the SSID to something unique2.
If your desired Wi-Fi network has a unique SSID, reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
Which is taken from this article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
It also may be helpful to follow these settings, which are optimal for use with iOS and OS X devices:
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

360 wireless received not being detected by Windows 7 64bit

Greetings, I bought this controller a couple of years ago and it's worked fine with Win7 until now. Now the receiver isn't being detected by 2 different computers. This makes it sound like the receiver has failed, but because it's not really and active
device how often do they really fail? There doesn't appear to be anyway to force Windows to detect something, the "find new device" wizard never finds it's and never even returns from looking. Any advice is appreciated.

Windows 7 is an Operating System. It is not a diagnostic tool and it has no capability to compensate for defective hardware!
You need to contact your service provider or the manufacturer for diagnostic assistance with your defective hardware. All hardware fails at some point. Some may be fully functional for years while others will fail within a very short period time.
The is now way to forecast when a piece of hardware will fail.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

IOS6: Beats Wireless Does Not Work Properly With Bluetooth

Half year ago, I spent 400 USD of my hard-earned money on a Beats Wireless headset (v2).... LOVE that headset... great sound when playing music and very good sound quality too when talking on the phone (iPhone 4S).
However, since "upgrading" to iOS 6, my Beats Wireless headset keeps on stopping when I play music (or skips parts of the music)... it is ANNOYING to say the least!
It's my understanding that it's a known problem, but WHY does Apple not DO anything about it??? The issue has been there for a long time now, and people who use Bluetooth in their cars have reported issues with using Bluetooth, too! Apple actually puts the lives of those drivers in danger by not fixing the problem!!
WAKE UP, APPLE!!!
I am just SO disappointed by Apple and iOS6... I am strongly comtemplating selling my iPhone and NEVER go back to an Apple product again!!!!!

I concur. I have the same problem with my Wireless Beats and my iPhone5. Skipping and disconnecting mid song. I'm hoping this will get fixed with the next update. Funny thing is, my other bluetooth devices, jaybird, LG soundbar work fine... I don't know who to point the finger at because it worked fine prior to upgrading my iPhone4 w/ iOS6.

Wireless is not automatically detected with rc.conf

Similar Messages

Maybe you are looking for