Wireless ssid active on time

I have a question you can set wireless ssid in the hours and days that it is active ?

I've looked at my router supports WCS how can you configure it?
I don't understand what a router has anything to do with a Cisco Wireless Control System (WCS). IT's a software that manages your Wireless LAN Controllers (WLC) and CAPWAP wireless access points.
If you want to configure time-based ACL, then click on the link below:
Time-Based Access Lists Using Time Ranges
Please don't forget to rate out useful posts. Thanks.

Similar Messages

How to connect a printer to a wireless connection using airport/time capsule

How do you connect a Cannon MP620 printer to the wireless network with my time capsule/airport? It was set up before but I've had to redo all the settings with a new Time Capsule and now the printer isn't working. Can't remember how I set it up before. Didn't seem that hard back then.
Thanks!

So you plugedd the printer into the time capsule usb right?
You need to re-add the printer in the system preferences one more time because the location has moved.

Can you use a roaming network and wireless extender at same time?

Greetings community - I've been struggling with an attempt to extend my wireless network for some time now. Please forgive my ignorance on the topic - I realize how 'simple' this is for many of you. Let me summarize:
What I have functioning:
1. Comcast telephony modem
2. 5th gen Airport Extreme as main wireless router connected to modem via Ethernet (corner of floor 3)
3. 2nd gen Airport Express as wireless extender (hooked to a stereo on floor 2)
What I want to accomplish:
1. I have poor wireless signal on my sun porch (corner of floor 1 opposite side of building as modem)
Extra equipment I have:
1. Another 5th gen Airport Extreme
2. Another 2nd gen Airport Express
What I have tried (and failed at):
1. Initially I set up the second Airport Extreme as a second wireless extender and placed it at a further point away than my first wireless extender. I quickly realized that set up does not function appropriately and one cannot connect to the further extender (I read about that on the apple forums).
2. I tried placing the second Airport Extreme in a different part of the house at equal distance from the main router as the first wireless extender. It's capability to extend was minimal if any.
3. I tried connecting the Airport Extreme to the main router via an Ethernet cable with the hopes of creating a roaming network (which I read about on the apple forums). I would have to come up with a way to run the Ethernet through the house but I'm willing to cross that bridge later. Once I got that set up, the 2nd gen Airport Express which was previously set up as a wireless extender is no longer recognized. Argh!!
Questions/Theories/Suggestions:
1. Is it possible to have a wired extender (via Ethernet) function at the same time as a separate wireless extender all connected to the same router? If so how do I do it?
2. I thought about keeping Airport Extreme #1 wireless connected to Airport Express #1 and call that Network 1. Then plug Airport Extreme #2 directly into the modem to create Network #2 and use Airport Express #2 as wireless extender. When I tried plugging both Airport Extremes into the modem, they both stopped functioning.
3. Do I get a second modem to put somewhere else in the house and use Airport Extreme #2 and Airport Express #2 in that fashion? My guess is Comcast will try to charge me a separate internet access fee to do that (boo!!).
I know there are a lot of brilliant folks out there. I'm sure someone can read this and see the 'obvious errors' in my ideas and attempts. I'm certainly open to new suggestions as well.
Thank you in advance for your time and advice.
- The New Guy

Is is possible to rename the AEx 2 a different network name from the AEx1 and AE 1 (even though they are all connected to each other)? And say it is possible, would that potentially preventing the jumping?
No, in extend wireless the names must be the same..
However since you are creating a network on AE2 which is extended by AEx2 then you can indeed use a different name.. but it must be both,, AE2 and AEx2.
2. Even more crazy - if I did (could) give the AEx 2 a different network name, could I use my AE 2 as a wireless extension to that second network? Or is this just getting out of hand now?
You have lost me now.. there are ways and means.. but let me recommend a better solution.
Use EOP (homeplug in US) adapters if you cannot run ethernet. Multi-storey houses where you have heavy concrete construction are never going to work well with wireless alone. You are much better getting ethernet properly installed (which is the only 100% guaranteed method).. or buy a set of EOP adapters and give them a try.. they work in some cases and not others.. but better than wireless when they do work.
Otherwise I think you need higher power wireless routers.. but I can suggest you do the setup in a more controlled manner.
In other words do not use auto as per the airport utility.. use very short wireless names, different for both bands.. and fixed wireless channels.. then test which band works better.. Then you can do a link.. which will be slow but might give you better performance.
So..
Link1 Main AE1---- AEx1 This is wireless extend.
Link2 AEx1--ethernet--AE2. AE2 is in bridge mode and is also set to create a wireless network. (Use different wireless name here to prevent confusion).
Link3 AE2-----AEx2 Second wireless extend.
This overcomes the Apple limitation on multiple extends. It is not great setup but might get wireless to where you need it.. And better speed than you can get now.
NOTE>. I would personally never do this.. I will run ethernet forevermore.. having tried and tried in various places and using all kinds of equipment.. my conclusion is.. wireless is not suitable.. unless you can get enough signal in from one AP.. everything behind it must be ethernet.
It is much more expensive in some cases.. but ethernet works.. nothing else can be guaranteed to work.

I want to see both the ssid in same time

help in aironet 1200
i hope to help me,
i have created two ssid with two vlan's but the broadcast is for one ssid only, i want the broadcasting for all my ssid in same time. where that the one ssid be appeared and other one be a hiden.
so how can i do that?
I want to see both the ssid in same time
EXD-AP#
EXD-AP#sh run
Building configuration...
Current configuration : 4617 bytes
version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname EXD-AP
ip subnet-zero
ip domain name Schoch-home.com
ip name-server 172.16.0.3
aaa new-model
aaa group server radius rad_eap
aaa group server radius rad_mac
aaa group server radius rad_acct
aaa group server radius rad_admin
aaa group server tacacs+ tac_admin
aaa group server radius rad_pmip
aaa group server radius dummy
aaa authentication login default local
aaa authentication login eap_methods group rad_eap
aaa authentication login mac_methods local
aaa authorization exec default local
aaa accounting network acct_methods start-stop group rad_acct
aaa session-id common
dot11 vlan-name test vlan 1
dot11 ssid EXDINT
   vlan 30
   authentication open
   authentication key-management wpa
   guest-mode
   infrastructure-ssid
   wpa-psk ascii 7 14120A0F410D243F04796166
dot11 ssid GUEST
   vlan 20
   authentication open
   authentication key-management wpa
   wpa-psk ascii 7 13000F1646050A3E0B777A62
username 78e400ed9588 password 7 06515724181E591C014E475354
username 78e400ed9588 autocommand exit
username 001e65ee5c38 password 7 135547430E5A512F2E712B606D
username 001e65ee5c38 autocommand exit
username 002668ec5b49 password 7 144742595A52722E277D31617B
username 002668ec5b49 autocommand exit
username 0022fc5b437b password 7 15425B5E562C28712A67667511
username 0022fc5b437b autocommand exit
username 00234d9fa256 password 7 075F711E1D5D1D5C1113595952
username 00234d9fa256 autocommand exit
username iqbal privilege 15 password 7 00010B02240A5955
username c417fea872a3 password 7 04585F575827494F514E571641
username c417fea872a3 autocommand exit
username 0016cf264d57 password 7 040B5B5759224A1C5F4D014245
username 0016cf264d57 autocommand exit
username exd-hq privilege 15 password 7 00010B02240A5955
username 00268202706b password 7 15425B5E527279747A64657411
username 00268202706b autocommand exit
username 002314054ea0 password 7 091C1E5B4A5443425E58012B7B
username 002314054ea0 autocommand exit
username 002436e8f6ca password 7 1249554546585A01722D722B32
username 002436e8f6ca autocommand exit
bridge irb
interface Dot11Radio0
no ip address
no ip route-cache
encryption mode ciphers tkip
encryption vlan 30 mode ciphers tkip
encryption vlan 20 mode ciphers tkip
ssid EXDINT
ssid GUEST
speed basic-1.0 basic-2.0 basic-5.5 basic-11.0
station-role root
interface Dot11Radio0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio0.30
encapsulation dot1Q 30 native
no ip route-cache
bridge-group 1
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface Dot11Radio1
no ip address
no ip route-cache
encryption mode ciphers tkip
speed basic-6.0 9.0 12.0 18.0 24.0 36.0 48.0 54.0
station-role root
interface Dot11Radio1.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
bridge-group 20 subscriber-loop-control
bridge-group 20 block-unknown-source
no bridge-group 20 source-learning
no bridge-group 20 unicast-flooding
bridge-group 20 spanning-disabled
interface Dot11Radio1.30
encapsulation dot1Q 30 native
no ip route-cache
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
interface FastEthernet0
ip address 192.168.30.10 255.255.255.0
no ip route-cache
duplex auto
speed auto
hold-queue 160 in
interface FastEthernet0.20
encapsulation dot1Q 20
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.30
encapsulation dot1Q 30 native
no ip route-cache
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
interface BVI1
ip address 192.168.30.10 255.255.255.0
no ip route-cache
ip default-gateway 192.168.30.1
ip http server
ip http authentication aaa
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
ip radius source-interface BVI1
radius-server attribute 32 include-in-access-req format %h
radius-server vsa send accounting
control-plane
bridge 1 route ip
line con 0
line vty 0 4
end
EXD-AP#
EXD-AP#
EXD-AP#

I think that my AP not support the MBSSID doue to it's very old , can update it ? if i can that how i do that?
System Software Version: Cisco IOS Software
Product/Model Number:
AIR-AP1210
Top Assembly Serial Number:
FHK0712J02R
System Software Filename:
c1200-k9w7-tar.123-8.JEA3
System Software Version:
12.3(8)JEA3
Bootloader Version:
12.2(8)JA
System Uptime:
3 days, 32 minutes

Can I use a non apple wireless hard drive with time machine?

Can I use a non apple wireless hard drive with time Machine?

Some NAS (network storage) systems do claim to support Time Machine, with varying levels of success. For example, the Synology units have this feature. They're not officially supported by Apple, though.
Matt

Active Directory Time Errors

Hi everyone. Putting this here as I could not find a better forum. My company's Macs are bound to a Mac OS X Server, but it's the Active Directory binding that is the issue.
We have a number of Macs, running 10.6.8, that starting sometime recently, began to have login issues. When connected to the network, users could not log in. These are mobile accounts authenticating against a Windows 2008 Active Directory server.
I started by checking whether binding was still valid. It was not. So I attempt to unbind, and there get an "Active Directory Time Error." It appears that usually, this means that the time on the client and the time reported by the AD server are out of sync. But they're not. I can force unbind, and on attempting to rebind, I get the time error again.
In nearly every case, these commands in Terminal resolve the issue:
$ sudo rm -rdfv /Library/Preferences/DirectoryService
$ sudo rm -rdfv /var/db/dslocal/nodes/default/config
$ sudo killall -USR1 DirectoryService
(then restart)
This didn't happen all at once, the issue has been popping up in one 10.6 machine after another. (We also have a number of 10.8 and 10.9 machines, which so far seem unaffected.)
Does anyone have any inkling what factors could be causing this to keep happening?

Not sure how you've confirmed that the times are not skewed; I'd (still) look for a problem with the ntp servers (one ntp server with a rogue time within a pool can play havoc with a network, for instance), and whether the local ntp clients are all reporting as being locked. See the ntpdc -c peers command, among other commands.

Can I use the AirPort Extreme as a wireless extender to my Time Capsule ?

Can I use AirPort Extreme as a wireless extender ? I own a Time Capsule and want to extend my wireless network using the AirPort Extreme just because both have wifi AC. Also, does the AirPort Extreme need to be hook up via Ethernet if I extend

The problem with extending using a wireless connection between the Time Capsule and AirPort Extreme is this.......
The extender can only "extend" the speed of signal that it receives. The signal starts to lose speed as soon as it leaves the Time Capsule, and the signal will lose quite a bit of speed as it passes through the ceiling due to the thick construction. The ceiling presents what is known as "interference" to the wireless signal.
So, the signal has slowed somewhat by the time that it reaches an AirPort Extreme that would be installed on the main floor. That AirPort Extreme acting as an extender can make the signal that it receives go further, but it cannot make it go faster. A better term than "extender" really might be "repeater".
If you install an AirPort Extreme on the main floor, the signal upstairs will be stronger than it is now, and depending on how many obstructions there are between the AirPort Extreme and the upstairs area, the signal may be noticeably faster upstairs than it is now as well.
With wireless connections between devices, there are always so many compromises and variables involved that it is just not possible to predict what the actual performance might be in your home until you try things out in your home. For that reason, it is always a good idea to understand the store's return policy in advance in case a new item does not deliver the performance that you are hoping to achieve.
Now, let's say that you are able to pull an Ethernet cable from the Time Capsule to the main floor, and the AirPort Extreme is connected there in a nice, central location. Then, you could expect to receive about the same performance on the main floor that you receive in the basement, since the AirPort Extreme is receiving a full speed signal over the Ethernet cable from the Time Capsule. You can run an Ethernet cable about 330 feet, or about 100 meters with virtually no signal loss.
The performance upstairs will improve as well, since the AirPort Extreme has a full speed signal to broadcast....not the slower speed signal that would receive from the Time Capsule if it connects using wireless.
If you want to achieve the same type of performance upstairs that you have in the basement and main floor, then you will need to pull an additional Ethernet cable up to the upstairs floor and add another AirPort there.
That would probably be the "best" wireless network system that you could install if you are looking at all the options. Few of us are lucky enough to be able to install the "best" network, but those that are receive remarkable wireless performance in return for their investment.

I have a Airport Extreme that is dropping the wireless signal alot (several times a day). The green light will go amber but the internet service (ethernet cable) will still be fine. The wireless icon on devices with go away.

I have a Airport Extreme that is dropping the wireless signal alot (several times a day) The green light will go amber, but the internet service is still ok if your using an ethernet cable directly plugged in. When the light goes amber all devices that is using wireless will lose there wireless icon. The only way to get the green light back is to unplug the Airport device and replug it back in. I tried the reset on the back but still no luck. What is the fix?

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

How do we know currently active call time in 6680?

How do we know currently active call time? Whenever we receive or make a call, how can we know the call duration in Nokia 6680?

Hello!
Just take a look on page 27 of Manual.
Recent calls: Connect -> Log -> Recent calls.
Steps to activate call duration as follows: Connect -> Log -> Options -> Settings -> Show call duration. Select Yes.
Andrey
6150, 8310, 2100, 6310, 6310i, 6230, 6600, 6630, 6700, E60, N80, E61, N93
N95, E61i, E71, E72,8600, 5800, N8

Task Details - Active Core Time and ms to hh:mm:ss conversion bug

Hey all,
In a Azure Batch App Job, each task has a "Active Core Time" value set when it completes. There is a bug in the conversion of milliseconds to hours/minutes/seconds. It appears to overflow on a day (Core time > 24 hours)
These are from an A4 (8 Core) machine:
3 Hour Task: 54m 21s (89661136 ms)
3 Hour task: 23h 9m 18s (83358872 ms)
4 Hour Task: 7h 45m 3s (114303288 ms)
On the first one, 89661136 is 24 hours and 54 minutes. The last one is 31.7 hours.
----- Ed

Hi Ed,
Thanks for bringing this to our attention. Just to clarify, are you seeing this behavior in the Mission Control portal, or the task API? I can see an Active Core Time in the task details panel in the portal so i am pretty sure that is what you are referring
to.
I will sort out a fix for this in the near future.
Regards,
Andrew

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

We are sorry we are unable to continue with your activation at time

When I trying to activate my i phone by i tunes appear to me this message ( we are sorry we are unable to continue with your activation at time ) , What can I do to activate it ??

Contact your Carrier.

Keeping wireless connection active on logout

Hi
If you want to use AdmitMac on a MacbookAir with only wireless how can you keep the wireless network active when you log out. It seems when you logout the wireless (WPA2 Enterprise) disconnects. And then at the login prompt you cannot use AD credentials since there is no network to connect to AD.
Has anyone found a workaround for this?
Larry

Larry,
We did some testing to be sure this works, and it does. We're currently testing with builds later than the current release. What version of ADmitMac are you using? You can contact me directly if you'd like.
Carl Ketterling
Thursby Software Systems, Inc.

I have a windows 7 operating system on my laptop and it keeps saying I have installed itunes wrong?? i have done this activity three times now and do not understand the error? what di I have to do to fix the problem?

i have a windows 7 operating system on my laptop and it keeps saying I have installed itunes wrong?? i have done this activity three times now and do not understand the error? what di I have to do to fix the problem?

What's the precise text of the error message, please? (There's a few different ones I can think of that you might be getting.)

Wireless SSID Broadcast?

When wireless SSID broadcast is DISABLED, does this prevent others in the area from seeing your network listed in the "view available wireless networks" list?

Thanks.
Forgot to ask: If a relative comes over and I let them hook into my network, will I have to ENABLE SSID for them to see it in order to log on?
Message Edited by AceH on 03-20-2008 02:21 PM

Wireless ssid active on time

Similar Messages

Maybe you are looking for