WISM2-Cannot Login via WEB
Hi everyone
I cannot login the wism2 with browser.
But I can use command to login the wism.
like this:
VSS-6509#session switch 2 slot 9 processor 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 172.16.31.2 ... Open
User:admin
Password:*********
(WiSM-slot41-1) >
notice:Sometimes I can login via the web.The interface and ip address configuration were correct.
WISM2 log:
*emWeb: Mar 08 05:20:38.189: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 05:04:38.105: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 04:48:38.032: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 04:32:37.951: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 04:16:37.861: #CLI-3-LOGIN_FAILED: cliutil.c:653 Login failed. User:nouser, Service type:-8. excessive failed login attempts.
*emWeb: Mar 08 04:16:37.861: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 04:00:37.780: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 03:44:37.708: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 03:28:37.623: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 03:12:37.550: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 02:56:37.482: #CLI-3-LOGIN_FAILED: cliutil.c:653 Login failed. User:nouser, Service type:-8. excessive failed login attempts.
*emWeb: Mar 08 02:56:37.482: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 02:40:37.396: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 02:24:37.308: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 02:08:37.191: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 01:52:37.103: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 01:36:37.022: #CLI-3-LOGIN_FAILED: cliutil.c:653 Login failed. User:nouser, Service type:-8. excessive failed login attempts.
*emWeb: Mar 08 01:36:37.022: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 01:20:36.951: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 01:04:36.853: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 characters.
*emWeb: Mar 08 00:48:35.253: #CLI-3-LOGIN_FAILED: cliutil.c:576 Login failed. User:nouser, Service type:-8. Username/Password length must be between 3 and 24 char
You have radius setup for managment? If you have radius setup, make sure you don't have the managmeent check box enabled unless you are using TACACS or Radius for management users. Seem's like radius if sending a reject back to the WLC.
Similar Messages
-
Cannot login via ssh/sftp from certain clients
Hi Guys,
Strange issue here. I have a machine running 10.7.4 that I want to be able to access via sftp/ssh.
I can login into the machine in terminal using either ssh or sftp.
I cannot however login to the machine from finder via sftp. I am just told the username/password is wrong.
Equally I cannot login to the machine from certain clients on my android phone (the main reason I need sftp)
I can however login from cyberduck on the other machines I have, and from some clients on my android phone.
When a mac is denied access it gives authentication failed as the reason, when a android client is denied access it gives network communtaction issues as its reason for failing, not authentication.
From memory these issues started when smb broke for me in 10.7.3.
Can any one shed any light on this?
Cheersbump
-
Some Users cannot login via Lync 2013 windows client
Hi,
I have a Lync 2013 FrontEnd server, DB server and Edge Server.
Since last noon we are facing a mysterious issue. Its as below.
( I have just entered into Lync administration)
User A and User B, both were able to login to lync till yesteday noon on their individual PC, any PC or mobile (windows, android, mac) with any version of Lync client, inside and outside the organization.
Last noon User A reported that he is facing an issue that whenever he logs in to lync 2013 client he is automatically logged off in 2 to 3 seconds. Then again logs in automatically and again loggs off in 2-3 seconds. and thats all is happening again and
again. The message he is is getting after he is logged off is "The connection to the server was lost
. Reconnecting. Current calls may continue, but with reduced functionality".
But at the same time he was able to login from other computer and his mobile device. At the same time, User B is not facing any issue on his machine.
Then User A tried to login from the User B's computer and there also he faced same issue. Then i asked User B to login on computer of User A and what i see is User B is able to login on User A's computer.
What is concluded from the observation is, User A cannot login from lync client 2013 from any computer inside and outside of my network and can login from any other client/version/platform inside or outside of my network.
What i checked for is Client Version Policy of User A and User B, but both are same (Automatic). Below is my client version policy and i am using client version 15.0.4605.1000
In Sing In Logs. (By Right click on system tray icon of lync) i got below information.
Error-1
In Windows 8, event viewer i am getting only Event ID 1 or 12 which says, "
The description for Event ID 12 from source Lync cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Lync
Thanks, Rishi Pandit.The issue has been resolved by removing an entry from "Trusted Application Server". This application server was being used for Polycom VC infrastructure integration with Lync.
As per Task 4 section in
Polycom and Lync Integration Documentation we have to use below-
http://support.polycom.com/global/documents/support/strategic_partner_solutions/Polycom_UC_Microsoft_Deployment_W8.pdf
Use the New-CsStaticRoute command to set up a static route for the RealPresence
Collaboration Server system.
$route = New-CsStaticRoute -TLSRoute -destination rmx.corp.local
-port 5061 -matchuri sipdomain.com -usedefaultcertificate $true
where rmx.corp.local is the FQDN of the RealPresence Collaboration Server SIP signaling
domain and sipdomain.com is the name of the Trusted Application Pool you created.
but this was wrong.
we used sip.domain.com and issue got resolved. Polycom forgot one (.) dot between sip and domain.com which ruined us.
Thanks.
Thanks, Rishi Pandit. -
Hello,
after installing iFS (version 9.0.1.1.0) access via Windows Network-neighborhood makes no trouble. Using the Web Interface iFS doesn't authenticate login and password although this user exists. The default system/manager has also no chance to login.
Thanks in advance for all hints!Hi Stephen,
I'm not sure why it would be hanging. You can try holding the reset button on the back of the device for 15 seconds. This is not data destructive, it only resets user and network settings. See if this will allow access to the device.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page -
No login via Web Interface possible
Hello,
after installing iFS (version 9.0.1.1.0) access via Windows Network-neighborhood makes no trouble. Using the Web Interface iFS doesn't authenticate login and password although this user exists. The default system/manager has also no chance to login.
Thanks in advance for all hints!Hi Stephen,
I'm not sure why it would be hanging. You can try holding the reset button on the back of the device for 15 seconds. This is not data destructive, it only resets user and network settings. See if this will allow access to the device.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page -
WRT160n cannot access via web browser
After i unchecked the acces the router through web browser box and saved setttings now I cannot get back in. I know this was a dumb mistake. I did this so I counld access my web cam. Every time I tried to access the cam the router sign in screen came up. Well now the cam orks but not the sign in screen. Please help. I really don't want to push reset because I don;t remember the settings AT*T told me to change to use the router with their Modem.
Are you getting any error message...?
Are you trying to access the router's setup page...?
If you want to access the router setup page then,Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...If you setup your own password and you don't remember the password then,you have to reset the router. -
Mac OS X Server : cannot login
I have a Mac OS X server 10.9.5.
Since a recent update of the Server App, I have the following problems :
- cannot login via imap and smtp to my server
- cannot "connect as" my self in Finder any more to see my home directory on the server from an Imac Server running also OS X 10.9.5
my server is accessed for the email as mail.agilebuild.com and when I connect from the IMac it is known as "agilebuild.local".
I think that I might have called the server ilantoutseul.agilebuild.com back when I set up Open Directory.
I see the following messages in /var/log/system.log
Any help will be appreciated.
Antoine
Dec 7 14:03:12 192.168.1.79 kdc[57]: Got a canonicalize request for a LKDC realm from local-ipc
Dec 7 14:03:12 192.168.1.79 kdc[57]: Asked for LKDC, but there is none
Dec 7 14:03:12 192.168.1.79 kdc[57]: Got a canonicalize request for a LKDC realm from local-ipc
Dec 7 14:03:12 192.168.1.79 kdc[57]: Asked for LKDC, but there is none
Dec 7 14:03:12 192.168.1.79 kdc[57]: AS-REQ [email protected] from 192.168.1.71:55075 for krbtgt/[email protected]
Dec 7 14:03:12 --- last message repeated 1 time ---
Dec 7 14:03:12 192.168.1.79 kdc[57]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
Dec 7 14:03:12 192.168.1.79 kdc[57]: AS-REQ [email protected] from 192.168.1.71:55063 for krbtgt/[email protected]
Dec 7 14:03:12 --- last message repeated 1 time ---
Dec 7 14:03:12 192.168.1.79 kdc[57]: Client sent patypes: ENC-TS
Dec 7 14:03:12 192.168.1.79 kdc[57]: Too large time skew, client time 2014-12-07T13:53:17 is out by 595 > 300 seconds -- [email protected]
Dec 7 14:03:12 192.168.1.79 kdc[57]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
Dec 7 14:03:12 192.168.1.79 kdc[57]: AS-REQ [email protected] from 192.168.1.71:49655 for krbtgt/[email protected]
Dec 7 14:03:12 --- last message repeated 1 time ---
Dec 7 14:03:12 192.168.1.79 kdc[57]: Client sent patypes: ENC-TS
Dec 7 14:03:12 192.168.1.79 kdc[57]: Too large time skew, client time 2014-12-07T13:53:17 is out by 595 > 300 seconds -- [email protected]
Dec 7 14:03:12 192.168.1.79 kdc[57]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
Dec 7 14:03:12 192.168.1.79 kdc[57]: AS-REQ [email protected] from 127.0.0.1:52952 for krbtgt/[email protected]
Dec 7 14:03:12 --- last message repeated 1 time ---
Dec 7 14:03:12 192.168.1.79 kdc[57]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
Dec 7 14:03:12 192.168.1.79 kdc[57]: AS-REQ [email protected] from 127.0.0.1:54789 for krbtgt/[email protected]
Dec 7 14:03:12 --- last message repeated 1 time ---
Dec 7 14:03:12 192.168.1.79 kdc[57]: Client sent patypes: ENC-TS
Dec 7 14:03:12 192.168.1.79 kdc[57]: ENC-TS pre-authentication succeeded -- [email protected]
Dec 7 14:03:12 192.168.1.79 kdc[57]: Client supported enctypes: aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, arcfour-hmac-md5, using aes256-cts-hmac-sha1-96/aes256-cts-hmac-sha1-96
Dec 7 14:03:12 192.168.1.79 kdc[57]: Requested flags: forwardable
Dec 7 14:03:12 192.168.1.79 kdc[57]: TGS-REQ [email protected] from 127.0.0.1:49155 for host/[email protected] [canonicalize, forwardable]
Dec 7 14:03:12 192.168.1.79 kdc[57]: Searching referral for 192.168.1.79
Dec 7 14:03:12 192.168.1.79 kdc[57]: Server not found in database: krbtgt/[email protected]: no such entry found in hdb
Dec 7 14:03:12 192.168.1.79 kdc[57]: Failed building TGS-REP to 127.0.0.1:49155
Dec 7 14:03:12 192.168.1.79 kdc[57]: TGS-REQ [email protected] from 127.0.0.1:57454 for krbtgt/[email protected] [forwardable]Hi Antoine,
According to this log at least the time between the server and client is off.
Dec 7 14:03:12 192.168.1.79 kdc[57]: Too large time skew, client time 2014-12-07T13:53:17 is out by 595 > 300 seconds -- [email protected]
Verify that both the client and the server have the same time, otherwise kerberos will not work.
Then open the terminal.app on your server and show us the output of:
sudo changeip -checkhostname
It will not change anything just give a reply about the hostname of your server.
That will give us more info on how to fix your problem.
Goodluck
Jeffrey -
Failed to login via Internet Explorer 8 in Oracle Secure Backup
I cannot login via explorer 8. when i enter admin as user name and my password. It returns to the same page (LOGIN Page).
When you go to the login page or log out it removes (or attempts to)
any previous cookies and recreates new cookies. I have been having a
problem with Internet Explorer 8 where it seems to be returning
something to my site that Coldfusion can't handle. I get
java.lang.nullPointerException. The error messages say the error
occurs either at line -1, with no idea what tag is involved, or line 6,
which is in the middle of my cfapplication tag. The diagnostics line
is always null other than the line number. From that, though, the
error seems to occur before my cfapplication tag even runs.
That suggests to me that the previous cookie is removed, but no new cookie is being created. The null would therefore refer to the non-existent cookie object. One way out might be to create new cookies without attempting to remove previous ones. -
Cannot login to airport extreme router settings
Hi
I've recently moved from an iiNet ADSL2+ service to NBN, in Australia. Everything has worked perfectly fine, and continues to, with relation to internet connectivity.
I've just signed up for an iiNet VOIP NetPhone service, and purchased a Gigaset C610 VOIP phone. In trying to connect with my current hardware, I'm running into constant difficulties. The first step is meant to be to login to my modem/router with my new iiNet NetPhone details. However, when I type my IP into Safari, I constantly get error messages saying that it cannot connect to the server.
I'm using an Airport Extreme Base Station, connected via ethernet to one of my Cat6 internet points. This then connects to my NBN box, located in my garage.
I've tried:
various IP address (10.0.1.1, 192.168.1.1 etc.)
connecting my MacBook via wifi and hardwiring
resetting and later restoring my Airport
using different computers (Mac and PC) to login
The internet still works fine, through ethernet and wifi - I just cannot login to my router.
I've phoned my ISP for support and they've said I need to go through Apple as it sounds like something is wrong with my router.
Any help?
Cheers,
EvanBump -> anyone?
Message was edited by: Ryan; -
Cannot login with AD credentials on iMac
Greetings:
I have a brand new 27" Intel iMac that had been allowing AD logins just find until today. Now, no matter what I do, unbinding, rebooting, manually joining domain (dsconfigad), etc I cannot login using my AD credentials. This had been working flawlessly until today. I can bind to AD no problem. When I go to login with my known good account, I just get the window shake. Logging in with a local account, I see error messages in the console of:
DNS Update Failed & Enter Machine Password
The machine account is already staged in our OU. I am not clear what the DNS error is alluding to.
reading through these postings: http://www.macwindows.com/snowleopardAD.html
I tried disabling creating mobile accounts at login. However that did not fix the issue.
I believe our campus is running Win2K8 AD servers. Our campus DNS appliance is a separate box, but should know how to delegate to AD (?). The other 10.6.3 machines we have, are authenticating against AD fine.
Any ideas?Marcus is correct - the ZAM administration accounts (ZAM 7.x) are stored (encrypted) within the ZAM database.
Within ZAM 7.x there is no way to integrate this with AD (either by LDAP referral or some kind of identity / password sync) and AFAIK no plans to add this.
I believe in the ZCM version of asset (and I hope the standalone version of ZAM10 still in dev) you set up the AD account(s) that is/are allowed Admin etc. access within ZAM, then LDAP referrals are used to authenticate via AD. I don;t know this for sure, though. -
[Help Req] Cannot login in with OD credentials
I am setting up for my first time a full Mac network (i come from MS/AD background).
I created a test account.. and OD credentials passed fine. Mobile account was created and offline worked as expected.
I then deleted the test account and created a few of our real accounts in OD... and then tried to login via cleanly built iMacs and MacBooks. however.... I am now no longer able to get any account to login.
What happens is this... I pass the login in credentials.. then get the beach ball.. then after a minute or two, the login panel will shiver.
Passing bad credentials will get an automatic denial. So I know the machines are doing something... but I have dug and dug and cannot figure how what has gone wrong.
Does anyone have any ideas?HI,
can you please provide the logs for the issue? -
Cannot login, and lots of more of these problems
I used to use the HP eprintcenter. This used to work properly.
Then it changed into HPconnect. The worst site I ever seen. Let me sum up:
1) I cannot login... Initially I used Chrome as a browser, but his does not work, so HP does not know there are other browsers than stupid IE.
2) then I used IE, There I select login and give my credentials. There it says I am already HP connected. Press the button below. "Go to HP connected". But when I do so, it is returning to the previous web page. I am simply turning circles.
3) Then I pressed HELP, and was directed to a forum. Guess what? it asks me to create a new account. Don't I have enough accounts already??? Why can't I use my HPeprint account??? But ok, once more.... I tried at least 15 different user names, but without success... turning circles again.
4) then I arrived on this forum. There is a special section on "how to use this forum". Dear HP, if you need to explain how it works, then it sucks. Make things easy, so you don't need to explain why you made it complex.
Can someone give me my old HPeprintCenter back or tell me how you can simply, with a single username and password and with whatever browser I like I can LOGIN to this stuff to see if it is really worth going through this misery???Hi 1f3,
I'm sorry to hear that you are having issues when you migrated from HP's ePrintCenter to HP Connected.
HP connected as been rolled out to the USA and the UK, all other countries/regions at this time are still using HP ePrintCenter. As for not being able to sign into ePrintCenter I have included a link to one of my posts here on the forum for those customers that seem to be stuck in a loop when trying to log in.
The easiest way to get your printer onto your new HP Connected account is to reset the web services on the front panel of your printer. I am unable to link you to the instructions on this as you didn't indicated which model/product of HP printer you have. After resetting the web services you will get a new claim code to add your printer to your HP Connected account. Please be advised, if you reset the web services, you will lose your current ePrint email address, and you will need to create a new email address for the printer.
If you still need to have an account deleted that you are unable to log into, please feel free to contact HP Cloud Services at 1-855-785-2777. If you live outside the USA/Canada region, please click the link below to get the Technical Support number for your region.
HP Support Forums post by Happytohelp01
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Cannot-sign-in-to-hp...
HP Support
http://www.hp.com/cgi-bin/hpsupport/index.pl
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Publish Sharepoint 2013 via Web Application Proxy and Kerberos Authentication
This is similar to
http://social.technet.microsoft.com/Forums/windowsserver/en-US/66c23aae-8774-4257-b9f9-b796e69b0318/action?threadDisplayName=publishing-sharepoint-2010-using-web-application-proxy
However I have tried his resolution to no avail.
I am trying to publish a SharePoint 2013 website via web application proxy. SharePoint 2013 is using negotiate (Kerberos) as its authentication provider. When trying to browse to the site externally via the WAP I get an http error 500 internal server error.
In the web application proxy's event viewer I find the following two entries every time I try to browse the site.
event ID 13019
level: warning
Web Application Proxy cannot retrieve a Kerberos ticket on behalf of the user because of the following general API error: No credentials are available in the security package
(0x8009030e).
Details:
Transaction ID: {5672be45-a4b8-0005-58ff-7256b8a4cf01}
Session ID: {5672be45-a4b8-0000-3909-7356b8a4cf01}
Published Application Name: sharepoint
Published Application ID: ****
Published Application External URL: https://sharepoint.domain.com
Published Backend URL: https://sharepoint.domain.com
User: [email protected]
User-Agent: Mozilla/5.0 (Windows NT 6.2; ARM; Trident/7.0; Touch; rv:11.0; WPDesktop; NOKIA; Lumia 920) like Gecko
Device ID: <Not Applicable>
Token State: OK
Cookie State: NotFound
Client Request URL:
https://sharepoint.domain.com/home?authToken=****client-request-id=****
Backend Request URL: <Not Applicable>
Preauthentication Flow: PreAuthBrowser
Backend Server Authentication Mode: WIA
State Machine State: BackendRequestProcessing_Pending
Response Code to Client: <Not Applicable>
Response Message to Client: <Not Applicable>
Client Certificate Issuer: <Not Found>"
And
event ID 12027
level: error
Web Application Proxy encountered an unexpected error while processing the request.
Error: No credentials are available in the security package
(0x8009030e).
Details:
Transaction ID: ****
Session ID: ****
Published Application Name: Sharepoint
Published Application ID: ****
Published Application External URL: https://sharepoint.domain.com/
Published Backend URL: https://sharepoint.domain.com/
User: [email protected]
User-Agent: Mozilla/5.0 (Windows NT 6.2; ARM; Trident/7.0; Touch; rv:11.0; WPDesktop; NOKIA; Lumia 920) like Gecko
Device ID: <Not Applicable>
Token State: OK
Cookie State: NotFound
Client Request URL:
https://gateway.dcsch.co.uk/home?authToken=****client-request-id=****
Backend Request URL: <Not Applicable>
Preauthentication Flow: PreAuthBrowser
Backend Server Authentication Mode: WIA
State Machine State: OuOfOrderFEHeadersWriting
Response Code to Client: 500
Response Message to Client: <Not Applicable>
Client Certificate Issuer: <Not Found>"
I have tried everything I have seen in many posts and the one linked above but cannot get this working. It does work fine internally.And within the next 10 minutes I found this
http://technet.microsoft.com/en-us/library/dn308246.aspx#Kerberos
Needed to set up delegation to ANY service in the Web application proxy -
HFM - log that shows if a user has loaded data via web form or excel load.
I can see any data loads that are coming from FDM, but is there a log that shows any data entered into HFM via web forms or submitted through an excel file? Any input is appreciated.
ThanksYou could enable Data Audit to capture data changes made by users, though this will not capture which method users chose to change the data. That is, HFM can show that data changed, and who changed it, but cannot tell whether the data was changed through a form, grid, smart view, or FDM. If you want to prevent users from changing data through forms, grids, or smart view, you can secure those input methods, but you cannot capture which one is used.
--Chris -
NWDS Webdynpro deploy: Cannot login to the SAP J2EE Engine using ......
Friends,
I am getting the following error while deploying a web dynpro application through NWDS.
Aborted: development component 'WebDynpro_ErrorBehavior'/'local'/'LOKAL'/'0.2007.05.29.17.02.04'/'1':Cannot login to the SAP J2EE Engine using user and password as provided in the Filesystem Secure Store. Enter valid login information in the Filesystem Secure Store using the SAP J2EE Engine Config Tool. For more information, see SAP note 701654.com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthExceptionWrapper: Wrong security credentials detected while trying to obtain connection to the J2EE Engine. (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMAUTHEXC)
I get this error after I supply the SDM password which NWDS asks before deploying.
Can someone guide?
[email protected]
ThanksIn the additonal error log it says-
Unable to compare host[px1db] and host[x900704] Throwable: java.net.UnknownHostException Throwable message: x900704: x900704
where px1db is my portal server and x900704 is my localmachine name.
I dont know why it says so ...In NWDS i have configured only px1db.
any thoughts.
Vinay
Maybe you are looking for
-
I PURCHASED AN APPLICATION FROM APPLE STORE. AN ERROR OCCURRED WHILST DOWNLOADING IT. IT WANTS ME TO REVERT BACK TO PURCHASES IN ITUNES, AS SOON AS I TAP ON "INSTALL" IT SHOWS THE SAME MESSAGE AGAIN. HOW DO I SOLVE IT PLEASE? IT SHOWS ON MY STATEMENT
-
What should I do if I want an external harddrive which is accessible both for Windows and Mac (OS Lion)?
-
Got a message today in Firefox that my "certificate is invalid because it is use by another computer"
-
Trying to install adobe photopshop elements 13, installation keeps freezing. I have windows 8.1
I have tried on three occasions to load the disc. It has frozen on 2% and 8% and I had to restart. It has currently been frozen on 17% for over an hour. The disc drive is silent and nothing seems to move or respond.
-
10.4.7 CPU Whine!!!! Please HeLp.. Newbie!!!!
Hi Guys.. I recently got a MBP (week 23) standard config.. As far as i remember i didnt notice the whirring or buzzing sound (known as CPU whine) until i upgraded to 10.4.7.. Well its pretty faint but i can easily here it when i am in a silent room n