With these changes I can only print a page the print preview capability has been taken away I use it all the time when wanting to print something from a website

When I was in a website and I wanted to print a page there use to be in the upper left hand corner of my screen a tab that said 'FIREFOX', I could click on that tab and I had several options, one was 'print' and 'print preview'. I use the print preview button all the time to see what the page would look like when I was printing and how many pages there were. I could then choose to print all or some of an article and adjust it to what I wanted to print. I no longer have that tab in the upper right hand corner. Now in the upper right hand corner is a tab for 'open menu', however in that menu is only a 'print' button. There is no option for 'print preview' and therefore I cannot adjust what I want to print. I also could adjust the margins, etc. from a view tab, that too I cannot find. I really hope there options are still available and how do I find them, where are they located?

In my updated firefox, the print button does NOT open print preview first.
How can I access print preview function?

Similar Messages

HT4993 I can only talk on my iphone 5 if i put it on speaker or use earphones, because the other person cant hear me. Any suggestions?

I can only talk on my iphone 5 if i put it on speaker or use earphones, because the other person cant hear me. Any suggestions?

Make a appointment with the Genius Bar at apple. If it is still under the 1 yr warranty it will be replaced free of charge. Or if you have AppleCare you should be covered.

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no lo

My macbook pro with OS 10.6.7 'mail' program does not send my mail through the IPS wireless, I am connected to. The message is my 'e-mail is rejected by the server'. It has been working until 5 days ago. The connection doctor says I am connected and no log in required.
After trying lots I found now in 'Airport Utility is 'unable to detect any airport wireless devises.....'
There is no provider to be seen in airport utility and only 'rescan' is an option with no results...
even so I am connected and can browse the net receive mail etc. and the outgoing 'mail server' is set to the internet provider I am connected to.
Can you enlighten me what can I do I need to use my e-mail program urgently !!!
Thanks for your help

I'm not sure what "IPS wireless" is, but unless you have an Apple Wi-Fi base station (such as a Time Capsule, AirPort Extreme, or AirPort Express), AirPort Utility won't see anything.
You might try defining a new SMTP server to see if that will work any better.
By the way, the subject field for these messages isn't intended to hold a lot of text. Put a short description of your problem in the subject field and save the rest of your message for the body field.

My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!

My external speakers have stopped working. A circle with a line through it shows up when I try to adjust the volume. I have been in system prefrences to check all the sound settings and everything is set properly. What do I need to do to fix this. Help!

Though I have doubts for success, you might try a SMC reset. It can do no harm. Otherwise, barring suggestions from others, the Apple Store or qualified repair facility is the last option.
http://support.apple.com/kb/HT3964
Ciao.

Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time...

Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I add/install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time... Thanks.

Enhance/Color Adjust/Color variation, seems to be missing in PSE 12. Can I add/install another version of PSE to Macbook pro Maverick 10.9.3 that has that feature? I use it ALL the time... Thanks.

I bought a iphone from someone and i think the driver and software has been removed. Is there anything on the web that i can download to reinstall the software i need to get it working again

Is there any software that i can download from the web to fix my phone? i bought it off the streets and the software and driver must have been deleted cause i can only get the itunes logo and i cant restore it.

There is no driver software on the iPhone that anyone can remove, per se. Why can't you restore? Is the iPhone not recognized in iTunes? If not, see:
http://support.apple.com/kb/TS1538
http://support.apple.com/kb/HT1808
Otherwise, please post back with details about the problem and someone can probably provide further suggestions.
Regards.

Pro15-inch with a lion at the bottom of the system, my computer is not always closed machine, has been a black and white, seems to read the disks that thing has been turning away, how do ah (do not want to reload) to help solve it

pro15-inch with a lion at the bottom of the system, my computer is not always closedmachine, has been a black and white, seems to read the disks that thing has beenturning away, how do ah (do not want to reload) to help solve it

What are you talking about?

Can you keep extra songs on your iPod that are not in your iTunes library, and not lose these songs every time you want to delete something from your iPod in the future?

I have all these songs that I want to store on my iPod but not on my computer, and I know that by choosing to manually manage my music I can still hang on to these songs when I add new songs to my iPod. However, what if I want to delete songs off of my iPod in the future? Will I lose all of the extra music that is on my iPod but not my computer, due to the fact that the only way to delete songs seems to be by syncing?

The answer to the question in the title of the thread is yes, but it is not necessarily a good idea. At some point you are likely to find you need to restore your iPod for one reason or another, or it could be lost, stolen or damaged. If your songs aren't on your computer, and backed up too, then you will be less than happy.
tt2

Can anyone help me!!! i have an i pod touch and the 4 digit passcode has been forgotten. i have tried a number of times to restore the factory settings on i tunes and have put the i pod into recovery mode, but attempts keep timing out

my son has forgotten his 4 digit pass code for hios i pod touch. i have been instructed to disable it and connect to i tunes to restore factory settings. when I do this the download time is anything up to 20 hours and it keeps timing out. it is now saying that i tunes cannot connect to the i pod because it is locked with a passcode and saying that i must enter the passcode - can anyone help?

- To get around the passcode issue, place the iPod in recovery mode. For how to see:
iPhone and iPod touch: Unable to update or restore
- If you are getting a network timeout error during the restore, disable the computer's security software during the restore.

I cannot find information to help me change the orientation of a video filmed in portrait format but only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

I cannot find information to help me change the orientation of a video filmed in portrait format but it can only able to be played back lying on its side (landscape) instead of upright. All the rotation buttons for iPhoto are not 'engaged' when it is in video .

Thanks OT,
I tried the Export function but it would not allow me to choose the option of exporting to iMovie. I think you are right about needing Quicktime Pro. I opened iMovie and imported the clip from iPhoto and with some searching found the 'cropping, rotation' mechanism. So I now have a copy in the correct orientation. I plan to import/export it back to iPhoto because I want to have a copy on my iPhone to show people and I wanted to have it available as part of a slideshow I am making in iPhoto of my recent overseas trip. It is a pain that there is no simple orientating tool for the movie clips downloaded to iPhoto with the photos from the one camera.

How can we send workitem after Po approval decision has been taken by appro

Hi.
How can we send workitem after Po approved decision has been taken by approver1 to approver2 in the same flow?
Regards,
Chow.

Some kind requests from a user who is of a different opinion:
Please create one thread for each different question, with a precise thread subject. It will make it easier to search for previously answers to the question someone has, and it will help keep each thread short.
Please do not introduce new questions on an entirely different topic in an existing thread.
Please always check if your answer has been answered already before you start a new thread.
Please do not ask the same question twice just because you did not receive an answer when you asked it first. Post a follow-up to your first thread if you want to make everyone aware that you are still looking for help to solve your problem.
Please mark questions as answered when you either have reiceived the answer, or solved the problem. It is also nice if you leave a little comment about how the problem was solved.
I guess that was all for today...

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

My laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time.

My Dell laptop hard drive crashed - when I go to sync my iPhone it says that my phone is already synced with another computer and can only be synced with one computer at a time. When I hit sync is says it will erase my phone and sync with the new computer which is blank. How do I get my phone to sync my contacts, pics, apps etc. over to my new hard drive without losing anything.

Yes, so what's confusing... Did you not restore the backup of your data, contacts, pics, apps, music, etc. to the new hard drive after you replaced it or reformatted it or whatever you did? If so, then you can just sync your data back.
If not, please try searching the forum. This has been addressed hundreds of times here.

If you have many tabs open (in my case 30 tabs), you cannot click every single tab with your mouse, you can only reach them by opening the tab list at the right

If you have many tabs open (in my case 30 tabs), you cannot click every single tab with your mouse, you can only reach them by opening the tab list at the right.

You can create a folder with the home pages by using "Bookmark All Tabs" to open a specific page.
You can place that folder on the bookmarks toolbar or use the Bookmarks menu button that you can find in the toolbar palette to get access to that folder easily.
* Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
* "Bookmark All Tabs" can be accessed via the right-click context menu of a tab on the tab bar.
* "Bookmark This Page" can be accessed via the right-click context menu of that browser page.

I cannot share information to my mac from my i phone with iCloud.. i can only share from my mac to the iPhone :s every setting seems to be find with iCloud.. any ideas ?

i cannot share information to my mac from my i phone with iCloud.. i can only share from my mac to the iPhone :s every setting seems to be find with iCloud.. any ideas ?

It may because you have iCloud and On your Mac views set up.
Let's work with Contacts....
1. Open Contacts
2. Preferences
3. Accounts
Does your screen look like this?
2

With these changes I can only print a page the print preview capability has been taken away I use it all the time when wanting to print something from a website

Similar Messages

Maybe you are looking for