Without providing access of mass storage,allow access of data card or local printer ,

Hello,
Pls assist in exploring the possibility to allow access of data card or local printer without providing access of mass storage.
Balwan Singh

Hello Balwan Singh,
You can use two methods on is using Administrative Template and the other is using Preferences, both are available within the GPO in Domain Controllers with 2008 and later.
Option 1: Administrative Template.
This setting can be configured either at Computer or User level.
You need to go to:
Computer or User Configuration\Policies\Administrative Templates\System\Removable Storage Access
In here you can Enable the setting "Removable Disks: Deny read access" or "Removable Disks: Deny write access"
Just be aware that this settings does not apply to a servers at a "User Configuration" level.
Option 2: Preferences.
This setting can be configured either at Computer or User level.
You need to go to:
Computer or User Configuration\Preferences\Control Panel\Devices
In here you need to create a new item as follows:
- Right click and select new --> Device
- On General Tab you can select two "Action" options "Use this device (enable)" or "Do not use this device (disable)" in this case you should use the second option "Do
not use this device (disable)"
- On "Device class:" you can browse the devices attached to the computer from where you are configuring this GPO.
In this list yo need to choose the "Universal Serial Bus controllers" node and among the options listed in here you should choose the "USB Mass Storage Device" which is the class used for USB drives.
Remember that if you are configuring the GPO from a domain controller probably you do not see the "USB Mass Storage Device" in the "Universal
Serial Bus controllers" node since there does not exists a USB drive directly attached to your domain controller.
You can workaround this by either connect a USB drive to your Domain Controller or connect with the Group Policy Management Console (GPMC.msc) from a workstation on which you can safely plug a USB drive just to be able to visualize it and configure your GPO.
Related Info:
Configure a Device Item
https://technet.microsoft.com/en-us/library/cc771861.aspx?f=255&MSPPError=-2147217396
I hope this info help you to reach yor goal. :D
5ALU2 !

Similar Messages

KDE 4.2 and USB Mass Storage , does not write data until unmounted

Hi,
I have a Nokia phone that I connect for USB mass storage, and KDE 4.2.2 does not seem to write the data to the device until I unmount.
Is there a way to force the write so it happens right away? It's annoying because I can't see any progress when it copies the data at unmount.
Later,
Snorkel

That's kinda the way linux does things, not specifically a KDE issue. It's so that the system only has to write out to the media only once, even if you separately add/delete/move 50 different files.
I think you can run 'sync' and that will flush all the file system buffers to disk.
Last edited by Odysseus (2009-05-01 01:30:59)

Which models provide access to handset memory via ...

Hi
Many Nokia models with a memory card inserted will allow the user to browse the contents of that memory card by connecting via cable and then selecting "Mass Storage" on the phone.
*Some* Nokia models allow the user to access the internal handset memory in a similar way - e.g. N95 8GB, 6500 Classic, N96 etc. Other models don't allow this (e.g. N95 will say that mass storage mode is not accessible without a memory card inserted).
My question is, which specific models allow this ability to access the internal handset memory via mass storage? Is there any kind of list somewhere?
Thanks
Kevin

"User data area" is too vague.
If there is no memory card inserted in the phone and if there is no built-in mass storage then the user data will be stored in the phone's internal memory (C: drive). Even in this configuration, the data is not accessible via mass storage mode.
Take the case of the N95-1. It has a 160MB C: drive and a slot for a memory card (E: drive). If there is no card in the slot then you won't be able to connect the phone in mass storage mode in the first place. If you do stick a card in the slot then that card is what you'll have access to in mass storage mode.
Now take the case of the N95-2. It has the same 160MB C: drive but also 8GB of on-board memory (E: drive), which behaves exactly like an 8GB memory card in the N95-1. It's this E: drive that's visible in mass storage mode.
Finally, take the example of the N96, which has both 16GB of on-board memory and a slot for a memory card. In mass storage mode it's the 16GB of mass memory (E: drive) that's visible. Whether there's a memory card in the microSD slot (F: drive) or not, it's the E: drive, and only the E: drive, that's visible in mass storage mode.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Storm 2 - RIM Mass Storage Device - Cannot Install Driver

Blackberry Storm2, with Desktop Manager 5.0 (11/23/09) installed, on Windows 7 x64. I have Roxio Manager installed, and am able to transfer Media ONLY through that application. There are no drives that show up in Windows Explorer for the blackberry internal storage and 16 GB SD media card.
Computer - Intel Core I7, MSI Eclipse plus MB, 12 GB Corsair DDR3 triple channel RAM, XFX Radeon 4870X2
I know this BB works with Win7 x64, as I installed Desktop manager on my laptop, and I am able to see both storage drives.
I have tried EVERY known fix for this specific issue:
1) uninstalling DM 5.0, total clean of RIM software, reboot computer, reinstall DM 5.0.
2) reverting back to an Acronis Trueimage backup made 2 days BEFORE I bought the BB
3) the "calfix.exe" for blackberry.
4) uninstalling DM 5.0, total clean of RIM software, reboot computer. Install of DM 4.x - FOUR different versions
5) Made a custom INF file for "RIM Mass Storage Device" pointing Windows to "Disk.sys" and "partmgr.sys", and that assigns unique CLSIDs for the drives. DO NOT try that, as it crached the heck out of my machine hence I was forced to use Acronis and recover.
6) Tried every possible combination of enabling/disabling media card support, auto enable mass storage
7) Pulled out SD card, soft and hard reboot of phone. Pulled battery out.
8) Tried the Fix from Pinstack forums
9) Even tried a low level system hook in a cutom wrote DLL that attempted to create a named pipe using that interfaces with the CreateFileA that Roxio uses when accesing the SD card for media transfers.
I am going on 2 solid weeks of several hours a day trying to figure this out. What could POSSIBLY be the issue of Windows not seeing the 2 storage drives, or not installing the drivers for the RIM Mass storage device?

FOUND THE SOLUTION:
http://tekblogs.com/tb/2007/08/18/vista-driver-problems-installing-a-usb-media-reader-a-solution/
My %SystemRoot%\INF folder was missing usbstor.inf. By going to a file repository in the "Windows\System32\DriverStore\FileRepository" and finding usbstor host folders, i was able to get a previously used .inf file to point Windows in the right direction.
This is most definitely a *Windows* issue. I had no troubles with upper and lower filters in the USB CLSID in the registry, so somehow the correct inf file was deleted and I was only able to find it in the repository.
Just a note: Roxio manager basically creates a virtual disk for its own internal use, using the RIM_USB.sys driver to communicate with the hardware. CreateFileMapping system calls are used to map this device for reading/writing. So Roxio can work without Windows explorer ever seeing it. Windows NEEDS the usbstor.inf to be able to install the correct USB drivers in order to access the volumes on the BB.
A moderator should sticky or tag this post, because this issue is very widespread and I only found the solution after 2 weeks of searching.

Help...Mass storage doesn't appear to work

Hi,
Just recently updated my 8900 last night where it asked to do a back-up and then did what it needed to do. didn't appear to be a problem.. until I hooked it up today.
To make a long story short.. Now when I hook it up to my USB I am no longer prompted to go into Mass storage Mode...Which is what I want...cause now it doesn't allow me to transfer files from my PC using file explorer like it use to.
My mass storage settings appear to be alright, I tried disabling it and enabling a couple times with no change.
Any advice out there on how to fix this?
Thank you.

Hello,
I am having something of the same problem. About two months ago my phone started to mess up (changing call profiles on it's own, going crazy on re-notifying (?) facebook and email notifications, etc) So I took it into Vodafone (my carrier) and they tried to just update the software, but it wasn't connecting properly, so it was sent away for repairs. It came back and all things seem to be a go - a few changes like the way the icons look on the main screen and that the lock button on top of the phone only locks the keyboard and not the whole phone anymore are not a problem, but the biggest is that I really can't connect to mass storage.
I have media card support: on
Mass Storage Mode Support: On
Auto Enable Mass Storage Mode when connected: prompt
I followed all the advice from this post: http://supportforums.blackberry.com/t5/BlackBerry-Desktop-Software/HOWTO-use-your-blackberry-as-a-US...
And still nothing is working. I have just had the phone connected to the computer for a while and was charging when all of a sudden I got a message saying that because of a problem with the USB hub, my settings on the computer, etc, it couldn't charge.
Could this be a problem related to the software updates that were done when I sent the computer away for repairs? Any ideas for how to get it to work again?
Thanks,

Access to Airport card settings?

Is there any utility for OSX providing access to Airport card settings/properties similarly to Windows as shown in this thread:
http://discussions.apple.com/thread.jspa?threadID=695733&tstart=0
Any script or something?

I've added a link to:
http://docs.info.apple.com/article.html?artnum=25801
on that thread as well as I'll point to it here.
I think it has to do with the Energy Saver settings.

K8N SLI Issue - USB Mass Storage Issue

New install. I have an issue with the USB Mass Storage device on my Canon printer.
When the machine boots, it pauses just on bootup for about 5 minutes. Pauses right after displaying the CPU information.
It eventually boots up into windows, but shows a yellow exclamation mark on 'USB Mass Storage Device'. I have tried uninstalling the printer drivers and reinstalling with no luck. If I pull the USB printer plug and then boot, I have no issues.
I've upgraded to the newest bios. I feel like even if I could fix the Windows driver issue, it might not help since the main pause is in the Bios startup...
Any ideas?

hi Zepp,
Welcome to the forum
Most common issue with usb is front case USB lead. if you have a lead connected to jusb1 or jusb2 on the mobo disconnect it & see if u still have issues. The reason is shown if your front usb does NOT work with your k7n2 board read this you'll see from the title it's not just the neo4
Have you a usb memory stick or anything else plugged in.
luck

Access USB mass storage dev on Netra 20

HI all,
We just got a Netra20 server for our lab and noticed the USB support it provides. I plugged a 128 Mb USB JumpDrive but have been unable to access it. I found some docs in docs.sun.com related to the topic where it instructs to do an eject -n (to see the device-alias available) however all I see from the output is Floppy and CDROM aliases, no generic usb alias. Also tried killing and restarting "vold" but no use.
Does anyone know what is the proper procedure to access it? BTW I am running Solaris 8. Is USB supported in Solaris 5.8?

USB is supported in Solaris 8 / SunOS 5.8. This includes usb devices that implement the USB mass storage
specification.
You may want to install the latest USB Framework patch 109896-21, it fixes several issues with usb mass
storage devices, and even adds USB 2.0 support.
But: The "Lexar (?) JumpDrive" (and other Lexar Products) seems to be a problematic device. It seems
this product does not work too well (or work at all) with Solaris' USB drivers:
http://www.beezmo.com/Solaris.htm
http://groups.google.de/groups?selm=bdi5g5%2444f%40csdsun1.arlut.utexas.edu

Mass storage device on AE - wireless access

I have a 1 TB mass storage drive connected to the USB port of my AirportExtreme. The computer that is connected by Ethernet to the AirportExtreme can access this drive perfectly, but the other two machines in the house that connect to the AirportExtreme wirelessly can't "see" it. Ideas? Those two machines surf through the AirportExtreme just fine - just can't access the mass storage drive.

if Mac try using afp if windows try smb

I have an apple developer account to make a new app, but I need to give access to the designer without sharing my payment info or allowing him to have access to my icloud, apps or itunes account. There is some way to have another password?

I have an apple developer account to make a new app, but I need to give access to the designer without sharing my payment info or allowing him to have access to my icloud, apps or itunes account. There is some way to have another password?

The designer is usually someone who just handles the user interface portion of the code. The developer would handle core functionality. I assumed you were the developer and the designer was the designer. You are the client and your "designer" is the developer.
Ideally, you should create a business account so that you can add someone to your team. That is the way it is supposed to work. Otherwise, you will have to ask for the final source code so that you can build and submit the app yourself. You should always have the source code regardless. You should always perform the submission under your own account too. Otherwise, it is the developer's app, not yours.
Sharing accounts is against the Apple Developer agreement anyway. The App Store Gold Rush is over. Now it is mostly zombie apps and competing fraudsters. You don't want to give someone access to your iTunes account. You really don't want to give someone access to your bank account either.
The best solution would be to convert your account to a business account. You may be able to have the developer submit the app and then transfer it to you.

HT2534 How to access and install appstore free apps without providing credit card number because I do not have one?

How to access and install appstore free apps without providing credit card number because I do not have one?

Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
Important: Before proceeding to the next step, you must download and install a free application. ...
Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. ...
To summarize, you must first download a free app from the App Store. When you are asked to sign in with your Apple ID, select "Create new account". Accept the terms and conditions checkbox, then click Continue. After you enter all the requested personal data, click Continue.
When you are asked to select a payment method, select "None".
That's all there is to it.

Providing access to Variables in the Query Designer

Greetings experts and fellow consultants,
I have a simple question, did a search and did not come up with much of an answer. Currently, we have a system with a role for BI Power Users in order for them to create ad-hoc queries. An issue we found was that these power users were not able to view variables within the query designer:
Under the "Characteristic Restrictions" pane, the variables show up as (Display Not Allowed) under their associated InfoObjects. This is presenting an issue (understandably) and I would like to provide access for these power users to see the variables.
My question is, are there any circumstances where I would want to restrict which variables are shown to the power user? Right now, I plan to allow display access to all variables (via S_RS_COMP+S_RS_COMP1 for those informed on Security). Just trying to brainstorm on whether there might be scenerios where I would want to hide certain variables.
Many thanks to all opinions, as always!

Suresh, in my above post I knew how to enable this. I just wanted to know in regards to security whether there were any exposures. Apparently, I could not find any and the changes went through without issue. The way you enable display of variables in the Query Designer is the following:
S_RS_COMP:
RSINFOAREA '*'
RSINFOCUBE '*'
RSZCOMPTP 'VAR'
ACTVT '03'
S_RS_COMP1:
RSZCOMPTP 'VAR'
RSZCOMPID '*'
RSZOWNER '*'
ACTVT '03'
Hope this helps. Of course, adjust the field values are you see fit but the minimum requirement is that RSZCOMOPTP 'VAR' (Variables) and ACTVT '03' (Display).

How can I use Airport Express to create a standalone Wi-Fi network without Internet Access so I can browse web pages on the local network? I will be using MAMP as my server (Apache)

I would like to create my own Wi-Fi standalone network at an upcoming tradeshow where there will be NO internet access.
Currently, I run and develop sites on my iMac use MAMP to manage my sites locally. Using MAMP, I run my sites as though they are on the internet although everything is local.
I purchased an Airport Express hoping I could create a standalone network so that the iMac would broadcast its website to whatever device connects to it such as my iPhone, iPad and MacBookPro.
However, after setting up the network successfully (I have a green light on the Airport Express, and there is NO internet going through it), I am not able to go any further by logging into the iMac's websites from the other machines. Form my MacBookPro Finder, I can look at files and folders using afp://10.0.1.2, from the Find/Go/Connect to Server utility, but I can't browse the website that is running on the iMac via the Safari browser.
Can anyone help me configure my MacBookPro (or iPad, or iPhone) to run the website on the iMac when they are all on the same network?
Thanks so much!!

1) connecting the TC using a ethernet cable from one of the two modem's LAN ports to the TC's WAN port
2) create a new Wi-Fi network using the TC ?
Does someone already create a new Wi-Fi network using its TC connected by Ethernet on a modem/router device ? How do you set up the DHCP (and NAT) ? Which range did you use ?
This is easy enough to do..
Plug the TC directly into a computer.. without other connections to do the setup.
Using the newly installed 5.6 utility.
Bridge the TC.
Create a wireless network.
This is an older screen shot and I would set security to WPA2 Personal only not WPA/WPA2 Personal as shown above.
I do recommend you use wireless names that are short, no spaces, pure alphanumeric.
Update the TC..
Now plug it into the modem router.. it will be a part of the network without doing NAT and DHCP itself.. which you do not want.. that leads to double NAT issues.. but it is a WAP that provides access to devices on both 2.4ghz and 5ghz bands directly to the main router.

HT201304 It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.

Please help!
It would be tremendously helpful to be able to access, set restrictions, and make changes from the parents device, to all devices under the same iTunes account, so that I could make changes to my kids devices without physical access.
I understand that I can set up a different Apple ID for the kids devices, or take physical control of the device and make the changes myself. However, my teenage son is technically savvy enough to have a job in Silicon Valley, as are most young people these days. However, in order to access his devices the current way, I first have to bypass the four digit pass code. This starts a fight of why I need in the device and continues to escalate. The argument that I am the parent will gain access but the fight is simply exhausting, and quite frankly shouldn't have to happen at all. He is not yet an adult, he did not pay for his iPad or iPhone and I, as a parent, should have not only have the right to change options at will, and from anywhere, but look at history or current activity when I feel like it.
I currently have the settings where app and in-app purchases require my password to be put in, and he must come to me to type it in, but I need more control and would like, and should be able to access any of our six devices and make individual changes simply by logging in to my account, with my password.
If I can see all my devices on the "Lost My iPhone" app, this technology should be easy to make happen.
C'mon parents! I have a pretty good kid, given all things that they can get into, but I am not stupid. For everything I see has been done, there is much more I haven't seen. I want my children to be kept safe and be able to know what they are looking at or listening to. We parents are the only ones who know our beliefs and what our kids can handle and when.
Thanks for any support or information that I may be missing in order to fulfill my request.

There are mobile device management solutions that can do this, including in Apple's OS X Server system, but most parents generally find that setting this up is more work than it's worth. If you're interested, though, there are a couple that at least purport to be free (I don't know if there are any hidden "gotchas"):
http://www.unwireddevicelink.com/features/
https://meraki.cisco.com/products/systems-manager
and Apple's system:
http://www.apple.com/osx/server/features/#profile-manager
I don't think any, however, allow you to see current activity or browser history. iOS doesn't expose those to access from MDM solutions, to the best of my knowledge.
Regards.

How to provide access to Critical Transactions in GRC AC 10.0

+Hello Gurus,+
+We are in phase of implementing GRC AC 10.0 , and have a requirement where there are "Critical Transactions" identified by the Business and if there is any end user who wants to access any specific "Critical Transaction" e.g. PA30 etc then it must automatically go to a specific Owner of that transaction.+
+As far as i know , we can have a workflow for getting a role assigned, but not sure if it is possible to have a workflow where every "critical transaction" will have an owner and then on selection of the transaction it will trigger a workflow.+
+I would also like to know what is a standard or rather best practice in SAP GRC , regarding providing access to "CRITICAL Transactions" ??+
+We thought of creating a role containing multiple "Critical transactions" and then assigning to the firefighter ID , for which we have an approval workflow !! But that does not help , as assigning the role will give user access to some other "critical transactions" as well which we would like to control.+
+Looking forward to know about the suggestion/solution for this issue.+
+Thanks in advance.+
+Regards,+
+Victor+

Hello,
Victor Ger wrote:
> +We thought of creating a role containing multiple "Critical transactions" and then assigning to the firefighter ID , for which we have an approval workflow !! But that does not help , as assigning the role will give user access to some other "critical transactions" as well which we would like to control.+
> +Victor+
I think that only one firefighter with all the critical transactions is not a good idea. I guess it's better to have different firefighters IDs assigned to different users. The point here is to decide if you really want to have a trace for all critical transactions executions.
An example:
Tx. SM37 is considered a critical transaction if the user has also the auth. object S_BTCH_ADM set to "yes". This allows to delete or copy others user's jobs. This is and authorization that a Basis person must have. Do you really want to trace this?
I think that force a Basis person to use a firefighter for this is nonsense, because this tx. is part of his/her job. Then, you should accept this sort of risks, otherwise you'll get the point where you replace the normal users with FF users. This is not the idea of FF.
Of course, this is just a thought and all depends on your business requirements.
Cheers,
Diego.

Without providing access of mass storage,allow access of data card or local printer ,

Similar Messages

Maybe you are looking for