Wlc 2006 mac filtering

I would like to allow client to access wireless lan based on the client mac-address.
How I config it on WLC 2006 locally (not using radius server)? If yes, How mnay mac-address can be configured on the wlc2006?
Thanks.
Douglas

Hi Douglas,
Just wanted to add a note to Ankurs good info;
Maximum MAC Filter Entries
The controller database can contain up to 2048 MAC filter entries for local netusers. The default value is 512. To support up to 2048 entries, you must enter this command in the controller CLI:
config database size MAC_filter_entry
where MAC_filter_entry is a value from 512 to 2048.
From this good doc;
http://www.cisco.com/en/US/products/ps6366/prod_release_note09186a0080813b1c.html#wp42756
MAC Filtering
http://www.cisco.com/en/US/products/ps6366/products_user_guide_chapter09186a00805a6ad0.html#wp1040588
Hope this helps!
Rob

Similar Messages

  • WLC 5760 - MAC Filtering wireless clients

    Hi,
    Does anyone ever deployed mac-filtering authentication to wireless clients in the WLC 5760?
    I've configured a WLAN for Mac-filtering authentication only (named it as "macauth"):
    wlan RNVDOS 4 RNVDOS
    aaa-override
    no broadcast-ssid
    client vlan RNVDOS
    mac-filtering macauth
    no security wpa
    no security wpa akm dot1x
    no security wpa wpa2
    no security wpa wpa2 ciphers aes
    session-timeout 1800
    no shutdown
    Then, below Configuration->Security->MAC Filtering I've added several MAC addresses i.e. :
    MAC Address: 88532e9ef70a  Attribute List: macauth
    Which turned out to be display in the CLI as:
    username 88532e9ef70a mac aaa attribute list macauth
    The problem is that whenever I try to associate the wireless client 88532e9ef70a, the client passes to the exclusion list.:
    Sep 16 10:54:55.603: 8853.2E9E.F70A Adding mobile on LWAPP AP  0C68.03EA.4070 (1)  1 wcm: E9E.F70A (.t^GwtSessionID: 0afe01fbtQ^GwH^Cnz^Gw00dd) was added to ^G$h\225v^K
    Sep 16 10:54:55.603: 8853.2E9E.F70A  Creating WL station entry for client -  rc 0 1 wcm:
    Sep 16 10:54:55.603: 8853.2E9E.F70A Association received from mobile on AP  0C68.03EA.4070  1 wcm: (.t^GwtSessionID: 0afe01fbtQ^GwH^Cnz^Gw00dd) was added to ^G$h\225v^K
    Sep 16 10:54:55.603: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: ssionID: 0afe01fbtQ^GwH^Cnz^Gw00dd) was added to ^G$h\225v^K
    Sep 16 10:54:55.603: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw00dd) was added to ^G$h\225v^K
    Sep 16 10:54:55.603: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm:  ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:55.603: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm:  0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:55.603: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:55.603: 8853.2E9E.F70A Applying site-specific IPv6 override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm:  ^G$h\225v^K
    Sep 16 10:54:55.603: 8853.2E9E.F70A Applying local bridging Interface Policy for station  8853.2E9E.F70A  - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
    Sep 16 10:54:55.603: 8853.2E9E.F70A Applying site-specific override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
    Sep 16 10:54:55.603: 8853.2E9E.F70A STA - rates (8): 1 wcm:  140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
    Sep 16 10:54:55.603: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
    Sep 16 10:54:55.603: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from Idle to AAA Pending
    Sep 16 10:54:55.603: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:55.604: 8853.2E9E.F70A
    client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:55.604: 8853.2E9E.F70A Sending Assoc Response to station on BSSID  0C68.03EA.4070  (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070  from Idle to AAA Pending
    Sep 16 10:54:55.604: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from AAA Pending to Authenticated
    Sep 16 10:54:55.604: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
    Sep 16 10:54:55.813: 8853.2E9E.F70A Association received from mobile on AP  0C68.03EA.4070  1 wcm: n.t^Gwseconds
    Sep 16 10:54:55.813: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
    Sep 16 10:54:55.813: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw  0C68.03EA.4070  f^G$h\225v^K
    Sep 16 10:54:55.813: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm:  ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:55.813: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm:  0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:55.813: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:55.813: 8853.2E9E.F70A Applying site-specific IPv6 override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
    Sep 16 10:54:55.813: 8853.2E9E.F70A Applying local bridging Interface Policy for station  8853.2E9E.F70A  - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
    Sep 16 10:54:55.813: 8853.2E9E.F70A Applying site-specific override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
    Sep 16 10:54:55.813: 8853.2E9E.F70A STA - rates (8): 1 wcm:  140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
    Sep 16 10:54:55.813: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
    Sep 16 10:54:55.813: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:55.813: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:55.814: 8853.2E9E.F70A
    client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:55.814: 8853.2E9E.F70A Sending Assoc Response to station on BSSID  0C68.03EA.4070  (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:55.814: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from AAA Pending to Authenticated
    Sep 16 10:54:55.814: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
    Sep 16 10:54:56.520: 8853.2E9E.F70A Association received from mobile on AP  0C68.03EA.4070  1 wcm: n.t^Gwseconds
    Sep 16 10:54:56.520: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
    Sep 16 10:54:56.520: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw  0C68.03EA.4070  f^G$h\225v^K
    Sep 16 10:54:56.520: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm:  ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:56.520: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm:  0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:56.520: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:56.520: 8853.2E9E.F70A Applying site-specific IPv6 override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
    Sep 16 10:54:56.520: 8853.2E9E.F70A Applying local bridging Interface Policy for station  8853.2E9E.F70A  - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
    Sep 16 10:54:56.520: 8853.2E9E.F70A Applying site-specific override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
    Sep 16 10:54:56.520: 8853.2E9E.F70A STA - rates (8): 1 wcm:  140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
    Sep 16 10:54:56.520: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
    Sep 16 10:54:56.520: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:56.520: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:56.521: 8853.2E9E.F70A
    client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:56.521: 8853.2E9E.F70A Sending Assoc Response to station on BSSID  0C68.03EA.4070  (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:56.521: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from AAA Pending to Authenticated
    Sep 16 10:54:56.521: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
    Sep 16 10:54:56.729: 8853.2E9E.F70A Association received from mobile on AP  0C68.03EA.4070  1 wcm: n 10 seconds
    Sep 16 10:54:56.729: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
    Sep 16 10:54:56.729: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: A  on AP  0C68.03EA.4070  from AAA Pending to Authenticated
    Sep 16 10:54:56.729: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm:  ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:56.729: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm:  0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:56.729: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:56.729: 8853.2E9E.F70A Applying site-specific IPv6 override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: from AAA Pending to Authenticated
    Sep 16 10:54:56.729: 8853.2E9E.F70A Applying local bridging Interface Policy for station  8853.2E9E.F70A  - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
    Sep 16 10:54:56.729: 8853.2E9E.F70A Applying site-specific override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
    Sep 16 10:54:56.729: 8853.2E9E.F70A STA - rates (8): 1 wcm:  140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
    Sep 16 10:54:56.729: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
    Sep 16 10:54:56.729: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:56.729: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:56.730: 8853.2E9E.F70A
    client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:56.730: 8853.2E9E.F70A Sending Assoc Response to station on BSSID  0C68.03EA.4070  (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:56.730: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from AAA Pending to Authenticated
    Sep 16 10:54:56.730: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
    Sep 16 10:54:56.937: 8853.2E9E.F70A Association received from mobile on AP  0C68.03EA.4070  1 wcm: n.t^Gwseconds
    Sep 16 10:54:56.937: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
    Sep 16 10:54:56.937: 8853.2E9E.F70A apChanged 0 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw  0C68.03EA.4070  f^G$h\225v^K
    Sep 16 10:54:56.937: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm:  ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:56.937: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm:  0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:56.937: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:56.937: 8853.2E9E.F70A Applying site-specific IPv6 override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
    Sep 16 10:54:56.937: 8853.2E9E.F70A Applying local bridging Interface Policy for station  8853.2E9E.F70A  - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
    Sep 16 10:54:56.937: 8853.2E9E.F70A Applying site-specific override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
    Sep 16 10:54:56.937: 8853.2E9E.F70A STA - rates (8): 1 wcm:  140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
    Sep 16 10:54:56.937: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: - vapId 4, site 'renova', interface 'RNVDOS'
    Sep 16 10:54:56.937: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:56.937: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:56.937: 8853.2E9E.F70A
    client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:56.937: 8853.2E9E.F70A Sending Assoc Response to station on BSSID  0C68.03EA.4070  (status 256) ApVapId 2 Slot 1 1 wcm: 68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:56.937: 8853.2E9E.F70A apfProcessRadiusAssocResp (apf_80211.c: 1 wcm: 2149) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from AAA Pending to Authenticated
    Sep 16 10:54:56.937: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 18) in 10 seconds
    Sep 16 10:54:57.143: 8853.2E9E.F70A Association received from mobile on AP  0C68.03EA.4070  1 wcm: n.t^Gwseconds
    Sep 16 10:54:57.143: 8853.2E9E.F70A qos upstream policy is unknown and downstream policy is unknown 1 wcm: onds
    Sep 16 10:54:57.143: 8853.2E9E.F70A apChanged 1 wlanChanged 0 mscb ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0 1 wcm: H^Cnz^Gw  0C68.03EA.4070  f^G$h\225v^K
    Sep 16 10:54:57.143: 8853.2E9E.F70A Applying WLAN policy on MSCB. 1 wcm:  ipAddr 0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:57.143: 8853.2E9E.F70A Applying WLAN ACL policies to client 1 wcm:  0.0.0.0, apf RadiusOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:57.143: 8853.2E9E.F70A No Interface ACL used for Wireless client in WCM(NGWC) 1 wcm: usOverride 0x0, numIPv6Addr=0
    Sep 16 10:54:57.143: 8853.2E9E.F70A Applying site-specific IPv6 override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: f^G$h\225v^K
    Sep 16 10:54:57.143: 8853.2E9E.F70A Applying local bridging Interface Policy for station  8853.2E9E.F70A  - vlan 4, interface 'RNVDOS' 1 wcm: ce 'RNVDOS'
    Sep 16 10:54:57.143: 8853.2E9E.F70A Applying site-specific override for station  8853.2E9E.F70A  - vapId 4, site 'renova', interface 'RNVDOS' 1 wcm: DOS'
    Sep 16 10:54:57.143: 8853.2E9E.F70A STA - rates (8): 1 wcm:  130 132 139 150 12 18 24 36 0 0 0 0 0 0 0 0
    Sep 16 10:54:57.143: 8853.2E9E.F70A STA - rates (12): 1 wcm:  130 132 139 150 12 18 24 36 48 72 96 108 0 0 0 0
    Sep 16 10:54:57.144:  8853.2E9E.F70A  0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [ 0C68.03EA.4070 ] 1 wcm:  site 'renova', interface 'RNVDOS'
    Sep 16 10:54:57.144: 8853.2E9E.F70A Updated location for station old AP  0C68.03EA.4070 -1, new AP  0C68.03EA.4070 -0 1 wcm: va', interface 'RNVDOS'
    Sep 16 10:54:57.144: 8853.2E9E.F70A new capwap_wtp_iif_id a45d40000000a5, sm capwap_wtp_iif_id 0 1 wcm: P  0C68.03EA.4070 -0
    Sep 16 10:54:57.144: 8853.2E9E.F70A apfProcessAssocReq (apf_80211.c: 1 wcm: 5137) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:57.144: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:57.144: 8853.2E9E.F70A
    client incoming attribute size are 0 1 wcm:   (callerId: 20) in 10 seconds
    Sep 16 10:54:57.145: 8853.2E9E.F70A Sending Assoc Response to station on BSSID  0C68.03EA.4070  (status 256) ApVapId 2 Slot 0 1 wcm: 68.03EA.4070  from Authenticated to AAA Pending
    Sep 16 10:54:57.145: 8853.2E9E.F70A apfBlacklistMobileStationEntry2 (apf_ms.c: 1 wcm: 6129) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from AAA Pending to Exclusion-list (1)
    Sep 16 10:54:57.145: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 44) in 10 seconds
    Sep 16 10:54:57.145: 8853.2E9E.F70A client is added to the exclusion list, reason 1 1 wcm: d: 44) in 10 seconds
    Sep 16 10:54:57.145: *apfReceiveTask: 1 wcm:  %APF-4-ADD_TO_BLACKLIST_REASON: Client 8853.2E9E.F70A (AuditSessionID: 0afe01fb5236e37f000000de) was added to exclusion list. Reason: 802.11 association failure 
    Sep 16 10:54:57.836: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion  1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
    Sep 16 10:54:58.533: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion  1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
    Sep 16 10:54:59.231: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion  1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
    Sep 16 10:54:59.922: 8853.2E9E.F70A Ignoring assoc request due to mobile in exclusion list or marked for deletion  1 wcm: fbtQ^GwH^Cnz^Gw00de) was added to ^G$h\225v^K
    Sep 16 10:55:06.972: 8853.2E9E.F70A apfMsExpireCallback (apf_ms.c: 1 wcm: 664) Expiring Mobile!
    Sep 16 10:55:06.972: 8853.2E9E.F70A Scheduling deletion of Mobile Station: 1 wcm:   (callerId: 46) in 60 seconds
    Sep 16 10:55:06.972: 8853.2E9E.F70A apfMsExpireMobileStation (apf_ms.c: 1 wcm: 7067) Changing state for mobile  8853.2E9E.F70A  on AP  0C68.03EA.4070  from Exclusion-list (1) to Exclusion-list (2)
    Sep 16 10:55:06.972:  8853.2E9E.F70A  0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [ 0C68.03EA.4070 ] 1 wcm: 3.2E9E.F70A  on AP  0C68.03EA.4070  from Exclusion-list (1) to Exclusion-list (2)
    Sep 16 10:55:06.972:  8853.2E9E.F70A  0.0.0.0 START (0) FastSSID for the client [ 0C68.03EA.4070 ] NOTENABLED 1 wcm: E9E.F70A  on AP  0C68.03EA.4070  from Exclusion-list (1) to Exclusion-list (2)
    Sep 16 10:55:06.972: 8853.2E9E.F70A Incrementing the Reassociation Count 1 for client (of interface RNVDOS) 1 wcm: D
    Sep 16 10:55:06.972: 8853.2E9E.F70A Clearing Dhcp state for station  ---  1 wcm:  for client (of interface RNVDOS)
    WLC1#
    WLC1#
    Kind Regards,
    Vasco

    Hi Patrick,
    Thank you for sharing your solution. It didn't solved entirely the problem but you pointed to the right direction!
    They are caused, because the system searches for an aaa authorization list, which is not configured.
    To resolve this configure the following
    aaa authorization network mac-filter local
    where mac-filter is the name you defined in the SSID.
    I've used your sugestion to create an aaa local authorization list but instead of naming it with the SSID, I've used the name of the attribute list ( macauth ) and it solved the problem:
    aaa authorization network macauth local
    username 88532e9ef70a mac aaa attribute list macauth
    wlan RNVDOS 4 RNVDOS
    client vlan RNVDOS
    mac-filtering macauth
    WLC1#sh wireless client summ
    Number of Local Clients : 1
    MAC Address    AP Name                          WLAN State              Protocol
    8853.2e9e.f70a APf872.ead7.31da                 4    UP                 11n(5)  
    Cheers,
    Vasco

  • Cisco WLC 5508 Mac Filtering

    Hi Group, how are you?.
    I know as Mac filtering feature works, but I need the opposite. I need to filter some mac-address to a particular SSID and permit all the other mac-address.
    Please, has anyone any ideas?.
    Thanks.
    Andrés.

    Hi Andres,
    I think stephan was talking about vlan based access control via RADIUS:
    check this document:
    http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html
    Regards
    Dont forget to rate helpful posts

  • About max local MAC filtering can be register in WLC 2504 and 5508

    Hi all
    My customer is considering to use WLC with MAC filtering feature (use local database not external Radius). So they are concerning about maximum local MAC filtering entries that can be register on WLC2504 and WLC5508 to buy (the number of APs is about 20, but the MAC is more than 200)
    I tried to search, but I could not find any specs mention it. If anyone knows, please help to answer
    Rgds

    I looked at this before. I want to say its maxed at 2048 regardless of the model ..
    http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/91901-mac-filters-wlcs-config.html

  • WLC 5760 multiple SSIDs with MAC filtering

    Dear All,
    I am implementing a wireless network with 5760 WLCs. The client requires a few SSIDs with MAC-based authentication. So I created different MAC filters using the commands "aaa authorization network MAC_FILTER01 local", "aaa authorization network MAC_FILTER02 local" etc
    These filters are bound to different SSIDs using the commands "mac-filtering MAC_FILTER01" "mac-filtering MAC_FILTER02" etc. and users are added to their required MAC filters using the commands "username <mac-address> mac aaa attribute list MAC_FILTER01", "username <mac-address> mac aaa attribute list MAC_FILTER02" etc.
    Now I am facing a serious issue - users belonging to any one MAC filter can connect to the all SSIDs. It seems like the MAC addresses added to the controller under different filter names are going to a common database, thereby providing access to users to all SSIDs irrespective of their MAC filter.
    Is it a limitation of local database of 5760? Has anyone faced the same issue? How can I implement independent MAC filters bound to different SSIDs?
    Thanks,
    Arun John

    Hi Arun,
    this feature currently does not exist on the  5760. it is due to release in one of the MR's of 3.6
    -Joseph

  • WLC MAC Filtering

    Hello
    One thing I am confused is if I set MAC filtering on a WLC but do not populate with any MAC addresses will it block all MAC addresses or allow all?
    Anyone can advise on this or please share information?
    Thanks

    When the database is empty then it will block all:
    MAC Address Filter (MAC Authentication) on WLCs
    When you create a MAC address filter on WLCs, users are granted or denied access to the WLAN network based on the MAC address of the client they use.
    There are two types of MAC authentication that are supported on WLCs:
    Local MAC authentication
    MAC authentication using a RADIUS server
    With local MAC authentication, user MAC addresses are stored in a database on the WLC. When a user tries to access the WLAN that is configured for MAC filtering, the client MAC address is validated against the local database on the WLC, and the client is granted access to the WLAN if the authentication is successful.
    By default, the WLC local database supports up to 512 user entries.
    The local user database is limited to a maximum of 2048 entries. The local database stores entries for these items:
    Local management users, which includes lobby ambassadors
    Local network users, which includes guest users
    MAC filter entries
    Exclusion list entries
    Access point authorization list entries
    Together, all of these types of users cannot exceed the configured database size.
    In order to increase the local database, use this command from the CLI:
    <Cisco Controller>config database size ?
    <count> Enter the maximum number of entries (512-2048)
    Alternatively, MAC address authentication can also be performed using a RADIUS server. The only difference is that the users MAC address database is stored in the RADIUS server instead of the WLC. When a user database is stored on a RADIUS server the WLC forwards the MAC address of the client to the RADIUS server for client validation. Then, the RADIUS server validates the MAC address based on the database it has. If the client authentication is successful, the client is granted access to the WLAN. Any RADIUS server which supports MAC address authentication can be used.

  • WLC 4402 Web Authentication, Mac Filtering and Layer 2 Seciruty

    Hi All,
    I have configured web authentication and Mac filtering on WLC 4402 for my wireless network and its working fine. I wants to configure layer 2 security for the same Wireless network without pre shared key. Could you please advice how to configure layer 2 security with web authentication withour preshare key.
    Is there any security issue with web authentication and Mac FIltering only? My concern in my wireless network shows open.
    Thanks,
    Kashif

    Hi,
    if you have a ACS, then you can do Web auth Splash page!!! Please refer to the below doc!!
    http://www.cisco.com/en/US/products/ps6366/products_configuration_example09186a0080956185.shtml
    Lemme know if this answered ur question!!
    Regards
    Surendra

  • Cisco 3850 WLC mac-filtering

    Hi:
    Cisco 3850 in WLC how to config mac-filtering
    thanks

    When you create a MAC address filter on WLCs, users are granted or       denied access to the WLAN network based on the MAC address of the client they       use.
    There are two types of MAC authentication that are supported on       WLCs:
    Local MAC authentication
    MAC authentication using a RADIUS           server
    With local MAC authentication, user MAC addresses are stored in a       database on the WLC. When a user tries to access the WLAN that is configured       for MAC filtering, the client MAC address is validated against the local       database on the WLC, and the client is granted access to the WLAN if the       authentication is successful.
    By default, the WLC local database supports up to 512 user entries.
    The local user database is limited to a maximum of 2048 entries. The       local database stores entries for these items:
    Local management users, which includes lobby           ambassadors
    Local network users, which includes guest users
    MAC filter entries
    Exclusion list entries
    Access point authorization list           entries
    Together, all of these types of users cannot exceed the configured       database size.
    To Know how to configure Mac filtering please go to the below link.
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008084f13b.shtml

  • WLC 2006 INTERNAL DHCP FOR GUESTS CLIENTS

    I would like to use the internal DHCP to issue ipaddress to the guest wireless clients.
    However; when i setup the wlc internal DCHP scope and try to connect to the wireless guest vlan the WLC debug DHCP reads ...forwarding to 192.168.255.2 which i have listed as the gateway to the pix
    any examples on how to do this would be great.
    here is what i have for the dhcp scope:
    Dhcp Scope Info
    Scope: Guest.Data.DHCP
    Enabled.......................................... Yes
    Lease Time....................................... 86400 (1 day )
    Pool Start....................................... 192.168.255.17
    Pool End......................................... 192.168.255.30
    Network.......................................... 192.168.255.0
    Netmask.......................................... 255.255.255.0
    Default Routers.................................. 192.168.255.2 0.0.0.0 0.0.0.0
    DNS Domain.......................................
    DNS.............................................. 0.0.0.0 0.0.0.0 0.0.0.0
    Netbios Name Servers............................. 0.0.0.0 0.0.0.0 0.0.0.0
    Here is what i have for the wlan
    WLAN Identifier.................................. 2
    Network Name (SSID).............................. Guest.Data
    Status........................................... Disabled
    MAC Filtering.................................... Disabled
    Broadcast SSID................................... Enabled
    AAA Policy Override.............................. Disabled
    Number of Active Clients......................... 0
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. Infinity
    Interface........................................ guest.data
    WLAN ACL......................................... unconfigured
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Enabled
    Quality of Service............................... Silver (best effort)
    WMM.............................................. Disabled
    CCX - AironetIe Support.......................... Enabled
    CCX - Gratuitous ProbeResponse (GPR)............. Disabled
    Dot11-Phone Mode (7920).......................... Disabled
    Wired Protocol................................... None
    IPv6 Support..................................... Disabled
    --More-- or (q)uit
    Radio Policy..................................... All
    Security
    802.11 Authentication:........................ Open System
    Static WEP Keys............................... Disabled
    802.1X........................................ Disabled
    Wi-Fi Protected Access (WPA/WPA2)............. Disabled
    CKIP ......................................... Disabled
    IP Security Passthru.......................... Disabled
    Web Based Authentication...................... Disabled
    Web-Passthrough............................... Disabled
    Auto Anchor................................... Disabled
    H-REAP Local Switching........................ Disabled
    Management Frame Protection................... E

    when i try to assocate the dhcp scope to wireless.guest.data interface using 192.168.255.1 which is the ip of the that interface it will not let me. I would have thought since i was using the interal dhcp that the .1 address would be the dhcp scope address also. i can assign 192.168.255.0 or 192.168.255.2(gateway)if i use .0 or .2 the dhcp request (discovery) process starts and then will forward to .2 (gateway) and never assign an address. the only thing that happens is that the client wireless interface will get 255.255.255.255 for a few seconds then go away.
    what i am trying to accomplish is to connect the wlc port 2 directly to a pix 506 which goes to the internet so the guest traffice is not on our vlan.
    any other suggestions on guest vlans would be appricated....
    Tom
    Interface Name................................... wireless.guest.data
    IP Address....................................... 192.168.255.1
    IP Netmask....................................... 255.255.255.0
    IP Gateway....................................... 192.168.255.2
    VLAN............................................. 150
    Quarantine-vlan.................................. no
    Physical Port.................................... 2
    Primary DHCP Server.............................. Unconfigured
    Secondary DHCP Server............................ Unconfigured
    DHCP Option 82................................... Disabled
    ACL.............................................. Unconfigured
    AP Manager....................................... No
    Scope: wireless.guest.data.dhcp.server
    Enabled.......................................... Yes
    Lease Time....................................... 86400 (1 day )
    Pool Start....................................... 192.168.255.17
    Pool End......................................... 192.168.255.30
    Network.......................................... 192.168.255.0
    Netmask.......................................... 255.255.255.0
    Default Routers.................................. 192.168.255.2 0.0.0.0 0.0.0.0
    DNS Domain.......................................
    DNS.............................................. 0.0.0.0 0.0.0.0 0.0.0.0
    Netbios Name Servers............................. 0.0.0.0 0.0.0.0 0.0.0.0

  • Mobility groups and MAC filtering

    We have a 4402 controller and we are doing MAC filtering. We have reached the default number of MAC addresses, 512. It has been recommended that we add an additional controller instead of increasing this past the default. Three questions:
    1. Is there an increased (enough to impact performance) load placed on the WLC if the limit of MACs is increased, say to the max of 2048?
    2. If we add an additional controller, configured in a mobility group, how do we configure the MAC filter to load balance? Or do we have to configure the same MAC table on both controllers? Which leads to....
    3. Is there a benefit to adding another controller as far as MAC filtering is concerned?

    As it stands, you would need to manually replicate internal mac filtering database between two controllers, so you're not gaining much with the second controller. As regards to increasing database size and what effects it will have, I don't have an educated answer for you, sorry.
    Regards,
    Roman

  • Cisco WLC Client MAC address backup to new Controller & ISE

    Hi All,
    We have an existing 4400 controller with MAC filtering for clients configured. Right Now, we are migrating to 5500 WLC and ISE setup.
    We want to use MAC filtering due to company policies on the new Controller as well as ISE.
    Is there a way (from GUI/CLI) that we can export the client MAC Addresses into an Excel file from existing WLC to new WLC & ISE?
    Thanks,
    CJ

    On the CLI issue a show macfilter summary and then import that into excel or a text editor.
    Sent from Cisco Technical Support iPhone App

  • PEAP authentication with MAC filtering

    Hi,
    I have an SSID, which required mac filtering as first level of security and Radius authentication also. I have done necessary configuration in  ACS and WLC. In ACS, the rule for MAC filtering is taking a hit, but the users are not asked for credentials. The wireless association also fails. The mac addresses are saved in End station filter on ACS. 
    Attached document has the complete configuration which I performed. Please let me know what I am missing here. Thank you.
    Regards,
    Madhan kumar G

    Hi,
    as per maldehne you have to play with the service type.
    check this discussion: http://goo.gl/R9E8ae
    To the authentication policy you have to add a 'service type' attributes and check based on that attribute.
    based on maldehne as per the past discussion the service type value in the rule condition should be:
    For MAC filtering: value should be:  call check
    For 802.1x: value should be : Framed
    Note that the MAC filter rule should come first.
    Hope this helps.
    Regards,
    Amjad

  • OEAP Remote LAN & MAC Filtering

    I am currently trying to set up the Remote LAN feature with MAC Filtering with WLC & ISE. I want to use Central Web Authentication, but the client connected to the wired port 4 of the OEAP does not get redirected. On the WLC I see the correct web redirect URL and ACL being applied (client details), but the redirect on the client itself is not taking place. The RADIUS NAC state of the wired client is also shown as "RUN" instead of the expected "CENTRAL_WEBAUTH_REQD". No anchoring is configured for the Remote LAN, since it is not supported in this WLC software release.
    Anybody have any ideas? Is this supported at all? The redirect is working fine with wireless on the OEAP.
    WLC 5508 7.4.110.0
    AIR-OEAP602I-E-K9
    ISE 1.2.0.899

    You are trying web-auth redirect on rlan correct? On remote lan 44 config:
    Remote LAN Configuration
    Remote LAN Identifier............................ 44
    Profile Name..................................... HomeOffice_RemoteLAN_Port4
    Status........................................... Enabled
    MAC Filtering.................................... Enabled
    AAA Policy Override.............................. Enabled
    Maximum number of Associated Clients............. 0
    Number of Active Clients......................... 0
    Exclusionlist Timeout............................ 60 seconds
    Session Timeout.................................. 86400 seconds
    User Idle Timeout................................ 300 seconds
    User Idle Threshold.............................. 0 Bytes
    NAS-identifier................................... XXX-XXXXXX
    Webauth DHCP exclusion........................... Disabled
    Interface........................................ homeoffice
    Remote LAN ACL................................... unconfigured
    DHCP Server...................................... Default
    DHCP Address Assignment Required................. Enabled
    PMIPv6 Mobility Type............................. none
    Radius Servers
       Authentication................................ 10.65.30.220 1812
       Authentication................................ 10.65.30.221 1812
       Accounting.................................... 10.65.30.220 1813
       Accounting.................................... 10.65.30.221 1813
          Interim Update............................. Disabled
       Dynamic Interface............................. Disabled
       Dynamic Interface Priority.................... wlan
    Local EAP Authentication......................... Disabled
    Security
       802.1X........................................ Disabled
       Web Based Authentication...................... Disabled
       Web-Passthrough............................... Disabled
    AVC Visibilty.................................... Disabled
    AVC Profile Name................................. None
    Flow Monitor Name................................ None
    802.11u........................................ Disabled
    MSAP Services.................................. Disabled

  • Simple WCS Mac filtering not functioning!

    Hello forum,
    We have just deployed WLC and WCS with couple of lightweight AP.
    We decide to employ MAC filtering to restrict wireless client.
    We noticed a SERIOUS problem, once we removed a mac address from the WCS and apply to controllers, Wireless client with that mac address are still able to access(ping,dhcp) the network even though its mac is removed from the currnt local mac filter after around 10mins???
    Is there a know bug to this issue? or it requires some moment for the changes to take effect.

    Hi all,
    problems solved. session-timeout is causing the client to maintain the session after mac removal.
    Cheers,
    Kelvin

  • 802.1x deployment with MAC filtering

    Hi All
    I read "Enhance your 802.1x deployment security with MAC filtering" on NAP blogs with link as below.
    http://blogs.technet.com/nap/archive/2006/09/08/454705.aspx
    I am wondering this tip might not be correct somehow and would like to know how to imployment it correctly.
    First of all, there is only a "Verify Caller ID" field in "dial-in" tab of user properties, not "Calling Station ID". I tried to add MAC address in this field and the authenticaiton works.
    As the description of the tip, we can add multiple MAC addresses in that field but it doesn't work. I tried to use
    "AA-BB-CC-DD-EE-FF | BB-AA-FF-EE-DD-CC" format as multiple MAC address and IAS always responce error with wrong calling staiton ID. Does anyone know how to correctly add multiple MAC addresses in "Verify Caller ID"?
    Thanks

    Hi Sam
    Thank you for your reply.
    I would like to explain why I want to use multiple MAC addresses authenticaiton for an account on a singel AD.
    Genereally, 802.1X can be imploymeted for wired and wireless authenticaiton on many network devices in a company or entriprise. An employee in a company or entriprise is supposed to have only one account but might have multiple devices such as a PC, laptop, or PDA. For the convenience of authenticaiton imployment, I think I should only create an account for that person and make a MAC filtering for any devices he is autrorized to use.
    I had tried the first example you mention but it didn't work. The switch and wireless gateway I used for test only sent one MAC address (calling station  ID) to AD and AD only recognized the first MAC address of all MAC addresses I key in. Of course, your example can be succesful if the device sends multiple MAC addresses simultaneously because AD thinks the those "MAC addresses" is just one string or one calling staiton ID. But that's is not what I want.
    Anyway, I will try the second way you suggest.
    Thanks a lot.

Maybe you are looking for

  • Bridge menu item tools photoshop batch is not present in CS4

    I recently installed CS4 on an iMac running OS 10.5.7.  I have a 3.06 GHz Intel Core 2 Duo processor, with 4 GB of ram.  The hard drive is 1 Terrabyte. In CS3 I could invoke my photoshop actions from bridge.  No such luck here.  I'm finding reference

  • VIDEO FILTERS MISSING

    When I try to open a project it appears the followin advise: D:\Mis documentos\Adobe\Premiere Pro\3.0\UTN3.PPJ.prproj Video Filter missing: AE.ADBE Motion Video Filter missing: AE.ADBE Opacity Video Filter missing: AE.ADBE ShadowHighlight What can I

  • Problem to connect to VMware virtual machine in VMM

    I have a problem to connect to the VMware virtual machine console through the VMM Admin Console. I get the message "For a connection with this virtual VMware machine necessary ActiveX object is not installed. Would like you to install the VMware Acti

  • HTML not unloading properly...

    I'm attempting my first AIR application, so bear with me if the code below is a mess - I'm learning as I go! What I'm trying to do is make a simple pop-up window that loads a local PDF file - I'm building a interactive CD.  The code SEEMS to work fin

  • Orderbooking demo: com.oracle.demos.orderbooking.ApproveType' is undefined

    I Receive the following error in the BPEL domain.log and BPEL console while running the OrderBooking demo with soa suite on OAS 10.1.3.5. The deployment of the orderbooking and associated webservices seems ok, including the DecisionService: I can rea