WLC 5508 - Error extracting webauth files.

Hi all,
i am getting an error during the Upload of Login page for WLC 5508 customized.
After the upload is completed i receveid the error "Error extracting webauth files."
I tried to create the file *.tar with different program (winrar, 7zip, gnu tar, etc)
anyone know the solution for this problem?
Thanks
Marco

TQVVM Marco, it helps and issue resolved. I was downloading a folder consists of (login.html+folder CSS) compressed .TAR but failed. Instead of putting in a folder and directly downloaded the compressed .TAR and it was extracted successfully.
Thanks.

Similar Messages

  • Error extracting webauth file

    Hi there - I'm having a problem downloading a simple webauth file to my 2106C. I turned debug on and this is what it show:
    TFTP receive complete... extracting webauth files.
    Thu Feb 21 07:52:51 2008: Still waiting! Status = 2
    Thu Feb 21 07:52:54 2008: upd_extract_webauth_components
    Thu Feb 21 07:52:54 2008: tar_file_name = /mnt/application/webauth.tar
    Thu Feb 21 07:52:54 2008: prsnt_strg = tar -C /mnt/application/webauth_ramdisk/ -xf /mnt/application/webauth.tar
    Thu Feb 21 07:52:54 2008: login.html not found in the webauth bundle downloaded
    Thu Feb 21 07:52:54 2008: RESULT_STRING: Error extracting webauth files.
    Thu Feb 21 07:52:54 2008: RESULT_CODE:18
    I noticed it says that there is no login.html fiel, but that;s not true. I do have one login.html file. I have tried everything and I am using PicoZip (30 day free version) to tar the file. I was able to do it once, but then I needed to modify the page and since then I have not been successfull. Any help would be greatly appreciate it.
    Cheers!

    All - problem ahs been solved. This is how I did it jsut in case someone else runs into the same issue. I noticed that the login.html file had a firefox icon (firefox was my defualt browser) I uninstalled firefox and archive the fiel again and boom -success . Weird, right? well I don't know if that was the issue, but it got resolved so you you run into the same issue, maybe is worth a try.
    CheerS!

  • WLC 5508 - Error When Uploading Webauth Bundle

    Currently have a WLC 5508 running 7.4.110.0.  I'm trying to upload (download) a webauth bundle to the controller from the web interface and am getting an error.  I've tried using FTP, SFTP and TFTP and get a different error with each.  When I started out with this, I was using a modified login.tar.  Thinking this was the problem, I switched to using the login.tar file included with the Web Authentication Bundle version 1.0.2 downloaded from the Cisco site.  This file fails with the errors below.  Does anyone have suggestions as to what I'm doing wrong?  Is this is a known bug in this version of the software?  Thanks!
    For FTP:
    The web interface shows: 
    % Error: Webauth Bundle file transfer failed - Unknown error - refer to log.   
    Log on the controller shows: 
    *TransferTask: May 28 13:51:12.942: #UPDATE-3-FTP_TRANSFER_FAIL: updcode.c:5631
    Error FTP file Transfer [ftp_get], <30>, Read-only file system.
    For SFTP:
    The web interface shows:
    % Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
    Log on the controller shows: 
    *TransferTask: May 28 14:52:58.779: #UPDATE-3-SFTP_TRANSFER_FAIL: updcode.c:5869
     Error SFTP file Transfer [sftp_get], <11>, Resource temporarily unavailable.
    For TFTP:
    The web interface shows:
    % Error: Webauth Bundle file transfer failed - Unknown error - refer to log.
    Log on the controller shows: 
    *TransferTask: May 28 15:02:39.232: #UPDATE-3-FILE_OPEN_FAIL: updcode.c:4593 Fai
    led to open file webauth.tar.
    *sshpmReceiveTask: May 28 15:02:39.153: #OSAPI-3-MUTEX_FREE_INFO: osapi_sem.c:10
    87 Sema 0x2b32def8 time=11504 ulk=18587678 lk=18576174 Locker(sshpmReceiveTask s
    shpmrecv.c:1662 pc=0x10b07938) unLocker(sshpmReceiveTask sshpmReceiveTaskEntry:1
    647 pc=0x10b079

    Hi,
    1. Did you used  PIcozip to compress your webauth bundle?
    2. Did you try only with one laptop , if yes then try to use other one.
    3. Just try to upload default webauth bundl from cisco to wlc and show the result to us.
    7.4.121.0 is very stable version.
    Regards

  • Error extracting CS4 files after download

    The download completed successfully.  But when I tried to extract the files, I got the same error others have encountered, with a message stating that I lack write permissions or sufficient free disk space.  Neither one is an issue.  Running Vista x64, SP1, and all latest patches.  Simply trying to extract to c:\temp.  That is a directory I regularly use for extracting files to an launching installations.  The directory was empty before I started this process.  Have not had any issues on this machine with CS3 or Lightroom.
    I deleted the files that were extracted, and deleted the downloaded files, and started over.  I got the same error.
    I then used Winzip to try extracting manually.  After successfully extracting a large number of files, Winzip encounters this error:
    Extracting Adobe CS4\extensions\AdobePhotoshop11-en_US\Assets\_12_f72882b07c2d47ae1f8200a12bbce0c0  Data error
    I have filed a support case on this issue.  I made a post here for a couple of reasons:
    Perhaps someone knows a solution that I have not yet been able to find.
    After I (hopefully) get a resolution from Support, I will post it here, as I found several threads on this, but did not see any clear resolutions.  Hopefully I can help someone out.

    And it has now started working.  I don't mean that the files downloaded earlier will extract properly.  I mean when I download now, I get a set of files that can be extracted properly and installed.
    Something changed at some point today.  I tried downloading again a couple hours after my earlier attempts that I made posts about.  At that time, the download link had stopped working.  Specifically, the link was redirecting to itself, causing an endless loop of making the same HTTP request over and over.
    Tried again about 20 minutes ago, and the download link was working again.  And the set of files I got have successfully extracted and installed.
    It appears that something was wrong with the files earlier, they made some changes (and while that was happening, the DL link was broken), and that the files now at the d/l server are fine.  Just an educated guess on my part, based on what I have seen.
    But...it works now.  Thanks for the replies. 

  • After downloading firefox installation file, I cant install firefox on my PC running on windows 7, and internet explore 9( when i want to run file, i recive error, Extraction Failed, File is corrupt, ,

    but my security software, microsoft security essentials , find nothing wrong whit the file, i have allsow chance the settings off my firewall , to accept the firefox file, but nothing chances?
    Can you please help to find the problem

    This can be caused by anti-virus software/ real time scanners. Please try to disable your anti-virus software real time scanner and try again. Do not forget to enable it after the download is complete!'
    See http://kb.mozillazine.org/Unable_to_save_or_download_files (Disable virus scanning in Firefox preferences - Windows)

  • Webauth page on WLC 5508

         Hi ,
    I need to download a login banner page on our WLC 5508 version 7.4.100.60  but i am getting error and the logs is showing the following :
    *TransferTask: Sep 11 11:05:04.248: #CLIWEB-3-BUFFER_TOO_LONG: cli_web_api.c:3240 Buffer for Login Banner too long (max = 1296 chars).
    My FTP is working fine since i have upgraded the version using it and the .tar file which i am trying to upload is 50K  can any body help on this please

    Mohammad,
    Typically, login banners are .txt files.  Please ensure the file that you are uploading is a .txt and not a .tar.
    If you are unsuccessful in uploading the file through the Web GUI, might I suggest that you try it through CLI?  Sometimes transfers just seem to work better through CLI.
    Just in case you have any questions on the CLI transfer, I have this link for your reference:
    www.cisco.com/en/US/docs/wireless/controller/7.0/configuration/guide/c70mfw.html#wp1132285
    This is the Configuration Guide for the WLC.
    Please let me know if this fixes your issue.  If it does, please rate this answer and mark your question as Answered.
    Charles Moreton

  • Error while extracting XML file from the application server

    Hi ,
    I am writing a XML file into the application server, after which when i try to extract the file to the local server using the report - RFASLDPC ,
    the file is extracted, but with a '#' symbol at the first position.
    Because of which the XML File does not open. But after i open the file in notepad and manually delete the '#' symbol and then reopen the file, it works fine.
    Is there any way to remove the '#' symbol while extracting itself ??
    Thanks in advance,
    Vikas.

    Select the option "No Character Set Conversion" in stead of Code page 1100.
    However, I still have troubles -> the downloaded xml file misses a space on several places. This causes errors too.

  • Error while extracting zip file

    I am using the following code to extract zip files from jar file
    source = "zip/test.zip"
    destination = "c:\\"
    public void unzip(String source,String destination){
              try{
                   ZipInputStream in = new ZipInputStream( this.getClass().getResourceAsStream(source));
                   FileOutputStream fos = null;
                   ZipEntry ze = null;
                   File ff = null;
                   while ( (ze=in.getNextEntry() ) != null ){
                        System.out.println( "name=" + ze.getName() );
                        ff = new File( destination + ze.getName() );
                        if ( ze.isDirectory() ){
                             System.out.println("making "+ze.getName()+" dir ("+ ff.mkdirs() +")");
                        else{
                             fos = new FileOutputStream( ff );
                             byte[] buf = new byte[1024];
                             int len;
                             while ((len = in.read(buf)) > 0){
                                  fos.write(buf, 0, len);
                             fos.close();
                             System.out.println("wrote file "+ff.getPath()+" success=" + ff.exists() );
                   in.close();
              }catch(Exception e){
                   e.printStackTrace();
         }     But i found error in extracting zip file
    java.io.FileNotFoundException: C:\eclipse\.eclipseproduct (The system cannot find the path specified)
    I need some quick response on it.

    Nothing to do with the resource path....thats fine. Use the code below.....most likely this will fix it.......
    Added a check for directories that start with a ".".  The File utility probably thinks its a file, also added a try....check it does make the "." directories.........dont forget the dukes.
        ZipInputStream zis = null;
        FileOutputStream fos = null;
        try
          zis = new ZipInputStream( new FileInputStream( "C:\\your_path\\your_zipfile_or_jar.zip" ) );
          ZipEntry ze = null;
          File ff = null;
          while ( ( ze = zis.getNextEntry() ) != null )
            System.out.println( "name=" + ze.getName() );
            ff = new File( "C:\\your_path\\" + ze.getName() );
            if ( ze.isDirectory()  || ze.getName().startsWith("."))
              try{ System.out.println( "making " + ze.getName() + " dir (" + ff.mkdirs() + ")" ); }catch(Exception e2){}
            else
              fos = new FileOutputStream( ff );
              byte[] buf = new byte[1024];
              int len;
              while ( ( len = zis.read( buf ) ) > 0 )
                fos.write( buf, 0, len );
              fos.close();
              System.out.println( "wrote file " + ff.getPath() + " success=" + ff.exists() );
          zis.close();
        catch( Exception ex )
          ex.printStackTrace();
        finally
          try { zis.close(); }catch(Exception ex){}
          try { fos.close(); }catch(Exception ex){}
        }

  • ISE 1.2 / WLC 5508 EAP-TLS expired certificate error, but wireless still working

    Hi I have a customer that we've deployed ISE 1.2 and WLC 5508s at.  Customer is using EAP-TLS with and everything appears to setup properly.  Users are able to login to the network and authenticate, however, frequently, I'm getting the following error in ISE authentication logs:
    12516 EAP-TLS failed SSL/TLS handshake because of an expired certificate in the client certificates chain
    OpenSSL messages are:
    SSL alert: code=Ox22D=557 : source=local ; type=fatal : message="X509
    certificate ex pi red"'
    4 727850450.3616:error.140890B2: SS L
    rOYbne s: SSL 3_  G ET _CL IE NT  _CE RT IF ICAT E:no ce rtific ate
    relurned: s3_ srvr.c: 272 0
    I'm not sure if this is cosmetic or if this is something that I should be tracking down.  System isn't in full production yet, but every client seems to be working and there is no expired cert in the chain.  Any ideas what to check?

    Hello Dino,
      thanks very much for your reply.
      The client uses a machine-certificate, the PKI is not a microsoft one, but a third party PKI.   The certificate is fresh and valid, the root-cert is installed and checked to be validated against it for the login.
    Clock is correct too. The same setup works flawlessly in Windows 7 and XP.
    EKU is set on the certificate (1.3.6.1.5.5.7.3.2)
    I suspect the cert-setup itself, but don't get a clue where this might stuck...
    Björn

  • WLC 5508 with LAP-1142n - Several Errors

    Hello all,
    I had installed a WLC 5508 with 7 LAP 1142n and 2 converted AP 1131abg.
    I am seeing some errors relating 2 issues.
    1st- One particular AP 1142 is disassociating and reseting the radios.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    Thu Oct 28 11:50:49 2010
    AP's Interface:0(802.11b)   Operation State Up: Base Radio MAC:e8:04:62:23:ac:e0 Cause=Radio interface   reset. Status:NA
    Thu Oct 28 11:50:49 2010
    AP's Interface:0(802.11b)   Operation State Down: Base Radio MAC:e8:04:62:23:ac:e0 Cause=Radio interface   reset. Status:NA
    Thu Oct 28 11:50:49 2010
    AP's Interface:1(802.11a)   Operation State Up: Base Radio MAC:e8:04:62:23:ac:e0 Cause=Radio interface   reset. Status:NA
    Thu Oct 28 11:50:49 2010
    AP's Interface:1(802.11a)   Operation State Down: Base Radio MAC:e8:04:62:23:ac:e0 Cause=Radio interface   reset. Status:NA
    Thu Oct 28 11:50:46 2010
    AP's Interface:1(802.11a) Operation   State Up: Base Radio MAC:e8:04:62:23:ac:e0 Cause=Radio reset due to Init.   Status:NA
    Thu Oct 28 11:50:46 2010
    AP's Interface:0(802.11b)   Operation State Up: Base Radio MAC:e8:04:62:23:ac:e0 Cause=Radio reset due to   Init. Status:NA
    Thu Oct 28 11:50:46 2010
    AP 'AP3', MAC:   e8:04:62:23:ac:e0 disassociated previously due to AP Reset. Uptime: 1 days,   10 h 24 m 23 s . Last reset reason: operator changed 11g mode.
    Thu Oct 28 11:50:35 2010
    AP Disassociated. Base Radio   MAC:e8:04:62:23:ac:e0
    Thu Oct 28 11:50:35 2010
    AP's Interface:1(802.11a)   Operation State Down: Base Radio MAC:e8:04:62:23:ac:e0 Cause=New Discovery Status:NA
    Thu Oct 28 11:50:35 2010
    AP's Interface:0(802.11b) Operation   State Down: Base Radio MAC:e8:04:62:23:ac:e0 Cause=New Discovery Status:NA
    I had some search, and the new discovery cause, might be that the AP didnt know what WLC do associate, in a multi-controller environment. This is not the case. I only have one WLC in the same management vlan.
    2st-The Radius server is beeing related in the logs as been deactivated. I raise the server time-out on Radius configuration option, but it still continues to do it.
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    Thu Oct 28 10:24:41 2010
    RADIUS server 10.67.128.36:1812 deactivated in global list
    Thu Oct 28 10:24:41 2010
    RADIUS server 10.67.128.36:1812 failed to respond to request (ID 172)   for client e8:06:88:51:c0:2b / user 'unknown'
    Is this meaning the WLC stop sending request to the Radius Server ? We dont have BackUp Radius.
    As far as i know, its always the same mac-address client that is associated to that error, maybe a iphone.
    I had so many clients in that SSID and they are all working good.
    The Radius server is a NPS from windows Server 2008
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    , and the client says that the medium response time is 0,02 sec, so im wondering why the controller is not getting response from Radius for a particular client?! My client also says, that didnt found any log related to that mac-address client ... what is weird...
    WLC with last software available 7.0.164
    Hope some one help me here.
    Best Regards,
    Bruno Petrónio

    Thanks Scott,
    I understand what you are mentioning, and i really didnt do it yet.
    I realize that the primary controller was not configured on the
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-qformat:yes;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:10.0pt;
    font-family:"Times New Roman","serif";}
    Wireless –> All APs –> High Availability tab, and did it only to the AP that is taking this beahviour.
    Is this mandatory for a 1 controller only ?
    No mather what the manual say, after that the AP is rebooting 2 mins in 2 mins... with the same kind of messages.
    The interface on the switch is getting a few input errors and the same numbers of crc... but are so few...
    Next step ... i will change it to another one's place/pathing cable.
    Regarding the Radius messages... any ideas ?
    I'm already on 30 sec's of server timeout.
    Best Regards,
    Bruno Petrónio

  • Photoshop CS3 extended error on Installation("A Problem occurred while extracting some files....

    Hi guys. I dont know if youve experienced this but I get this error whenever I try to install Photoshop CS3 Extended. The error popup message goes like this:
    "A Problem occurred while extracting some files. Check available space on your computer and the write privileges on the destination folder."
    Any idea? :(
    thanks in advanced.
    Cheers!

    Welcome to the forum.
    where is the file to download it directly?
    With CS3, there might not be one any longer. CS4 has been out for some time. You might need to contact Adobe Customer Service for resolution. I know that they offer replacement media for a small fee, but do not know how far back they go with the versions.
    For me, I always purchase the full discs, and from Adobe, so I have little experience with downloaders and with the downloadable files. Maybe someone else can offer you more direct assistance.
    Good luck,
    Hunt

  • Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe is nt available. Whn i try to extract .7z file wd 7-Zip error pops up " cannot ex

    Hi, download of the trial product (photoshop ele 13) does nt start even after successfully installing the Adobe download assistant successfully. Only .7z file is shown, .exe file is nt visible. Whn i try to extract .7z file wd 7-Zip error pops up " cannot extract **.7z as archive" .I've tried fresh download of adobe photoshop ele 13 but same error occurs. 
    OS:Windows 8.1
    Storage loc for adobe down assistant  : C-Program file(x86)-Adobe download assistant-adobe
    Storage loc for adobe down assistant:    C- Adobe photoshop assistant 13-  PhotoshopElements_13_LS25_win64_1. 7z
    After this I try to extract ** .7z file but following error occurs :
        After this I try to extract ** .7z file but following error occurs
    Kindly Help.

    Thanks fr revert !
    After clicking on the provided link , Above error pops up. I clicked "ok" n allowed download to complete after which same previous error shows up!

  • WLC 5508 duplex mismatch error

    Hi I've got a WLC 5508 connected to a Catalyst 6000 switch. In the switch I've get a CDP duplex mismatch error every 30 min.
    %CDP-4-DUPLEXMISMATCH:Full/half duplex mismatch detected on port 3/23
    with the show port command I can see this:
    Port  Name                 Status     Vlan       Duplex Speed       Type
    3/23  WLC           connected  trunk        full        1000 10/100/1000
    With the show CDP neigh I see a duplex mismatch
    C6K9> (enable) sh cdp neig 3/23 detail
    Port (Our Port): 3/23
    Holdtime: 142 sec
    Capabilities: HOST
    Version:
      Manufacturer's Name: Cisco Systems Inc.  Product Name: Cisco Controller  Product Version: 7.0.116.0  RTOS Version: Erro  Bootloader Version: 1.0.1  Build Type: DATA + WPS
    Platform: AIR-CT5508-K9
    Port-ID (Port on Neighbors's Device): GigabitEthernet0/0/1
    VTP Management Domain: unknown
    Native VLAN: unknown
    Duplex: half (Mismatch)
    But in the WLC console there is not half duplex
    (WLC5508) show>port 1
               STP   Admin   Physical   Physical   Link   Link
    Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE    SFPType  
    1  Normal  Forw Enable  Auto       1000 Full  Up     Enable  N/A     1000BaseTX
    I don't have errors in the port counters
    How I can resolve this duplex mismatch?

    Try upgrading the firmware of the WLC to 7.0.230.0.

  • SFP Error with WLC 5508

    all,
    I'm facing a problem to upgrade my WLC 5508 from 6.0.199.4 to 7.0.98.218
    On my WLC, I have a bad src error message about the SFP.
    With the version 6, I have the "warning" but the port is UP and Running
               STP   Admin   Physical   Physical   Link   Link
    Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE    SFPType
    1  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    2  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    3  Normal  Forw Enable  Auto       1000 Full  Up     Enable  N/A     SFP Error
    on version 7.0.98.218, the port never comes UP:
               STP   Admin   Physical   Physical   Link   Link
    Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE    SFPType
    1  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    2  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    3  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     SFP Error
    I see a bug about CSCta32912, but normally, it is solved in version 7.
    How to solve this issue?
    Thanks.
               STP   Admin   Physical   Physical   Link   Link
    Pr  Type   Stat   Mode     Mode      Status   Status  Trap     POE    SFPType
    1  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    2  Normal  Disa Enable  Auto       Auto       Down   Enable  N/A     Not Present
    3  Normal  Forw Enable  Auto       1000 Full  Up     Enable  N/A     SFP Error

    Are you using a Cisco SFP or a third party one?
    Sent from Cisco Technical Support iPad App

  • Cisco WLC 5508 in HA mode error

    Hai ,
    I am Getting the below Error in Cisco WLC 5508, Version 7.4.100.0 in HAmode. The WLC contains Access Points having in local and Flex Connect Mode.
    RF failure notification ErrorType: 32 Reason :Error: Config Sync failed on Standby for the usmdb:HA_send_usmDbApfMsDelete,
    I sam a same bug in Cisco WLC 7.4.100.0 release notes similar to the error like
    RF failure notification ErrorType: 32 Reason :Error: Config Sync failed on Standby for the usmdb:HA_send_usmDbSpamSetRadSlotAntennaType.
    Any Ideas?

    HI Mohamed,
    its a open Caveats  in 7.4.100.0
    CSCud26632
    Symptom: The following SNMP trap appears on the controller when you change the channel width number to 40-MHz:
    RF failure notification ErrorType: 32 Reason :Error: Config Sync failed on Standby for the usmdb:HA_send_usmDbSpamSetRadSlotAntennaType.
    Conditions: Controller is in an HA pair. Join the 802.11n access point to the controller and change the channel width to 40-MHz and channel number to 157.
    Workaround: None
    http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn74.html
    Reagrds
    Please rate helpful posts

Maybe you are looking for

  • I recently found my iPad that i haven't used in a while, and realized that i put a passcode lock on it. What do i do?

    I've tried going on my computer and backing it up, and it starts to work, but after a little while it will say Unable to connect to this iPad. Enter the passcode and then try backing up. There's a little problem though... I CAN'T REMEMBER IT! I'm get

  • JavaScript functions in ADFLib - jdev 11.1.2.3

    Hello: I would like to create an ADF Library that has many JavaScript functions and any application that adds this ADF Library to its project should be able to use the javascript functions. Or is there a better way to accomplish this? I'm following t

  • 16:9 Problem too

    So I go to export my 16:9 FCEHD movie and it comes out squashed on both sides... not exactly 16:9 nor 4:3... Shouldn't it simply export as it is produced? Granted, its not originally HD but 4:3 brought onto a 16:9 canvas and treated and cropped to fi

  • Safari 4.0.4 is not launching on my MacBook Pro 10.4.11

    I click on the safari icon on the dock or in the application file and the Safari Box shows up for a minute then quits and say the application Safari quit unexpectedly. I do this three more times by hitting reopen and then gives me the option to send

  • VDI 3.1 EA 2 Error

    Server: s10u7 x86, Java 6 update 16 2 things, actually; The first is that when I try to add my server as a Desktop Provider, it says that the server is not accessible on port 443 (SSL). Apache2 is definitely running, and i get the 'Welcome' message w