WLC5508 for only HREAP/FlexConnect?

Having setup several WLC4402's in the past, I am posed with a new implementation that I have never tried before. I will be setting up a new 5508 that will ONLY be used for remote access-points in H-REAP mode. It is going into a datacenter and there will be no local LWAPP's.
Is it still required to setup a dynamic interface on a network that will essentially only have the controller IP? Or can I serve all the AP's out of the single, untagged management interface (which I believe is also the old ap-manager interface now?) ?

you can simply use just the managemnet, as no traffic will be locally terminated at the WLC>
I however would create a 'dummy' interface with a bogus vlan. Then link the WLANs to the dummy interface, so incase something messes up, you aren't accidentally putting clients on your management subnet.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Similar Messages

I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

I have been using my Apple ID in India and recently i moved to Spain and now i can not see my indian apps.it says my apple ID is valid for only spanish store.how to download apps from Indian store being in Spain.

Did you try to change the location in Settings/iTunes & AppStore/AppleID -> view Apple ID, log in ->Country/Region -> India?

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

Every time I try to open my safari it restarts my computer, or if it does open it is for only about a minute before it gets and error and closes.What should I do?

gets and error and closes.What should I do?
If Safari is crashing.. post a crash report so we can try and help...
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Copy/paste the entire contents of the Crash Reporter window into your reply including the, "binary images" seection.
If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.

I share a an apple id with my kids. We all use the same credit card for purchases. Is it possible for only me to use the icloud online storage without making this available or visible to the kids?

My kids and I all use the same credit card and password for app and music purchases. I'm assuming we all use the same apple ID too. (not sure) We can share apps and music although we all have our own itunes libraries. Is it possible for only me to use the icloud online storage without making this available or visible to the kids or do we all have our own storage?

I just checked and they have already sucked up all my online storage. Ahhh techy teens! I think I will just leave it at that and back my own stuff up on my computer. Less confusing
Thanks for all the help! I am definitely more educated now and I'm off to check that cc bill too.

How can I correct that emails for only one of my address going direct to my trash file before even being read and this just started a while back not before?

have been living with this for a while, do not remember when it started and have already try different ways a solving the problem but nothing has corrected the situation.

thanks for ur suggestion, no help. still goes to trash for only one of my email addresses, other two no problem.

Tacacs authentication fails for one user account for only one switch

Hi,
I am having an scenario, where as Tacacs authentication fails for one user account for only one switch.
The same user account works well for other devices.
The AAA configs are same on every devices in the network.
Heres the show tacacs output from the switch where only one user account fails;
              Socket opens:        157
             Socket closes:        156
             Socket aborts:        303
             Socket errors:          1
           Socket Timeouts:          2
   Failed Connect Attempts:          0
        Total Packets Sent:       1703
        Total Packets Recv:       1243
          Expected Replies:          0
What could be the reason ?
No errors on ACS server; same rights had been given to the user account.
Thanks to advise.
Prasey

Hi there,
Does the user get authenticated in the ACS logs?
reports and activity----> failed attempts
ro
reports and activity-----> passed authentications
That will help narrow it down.
Brad

F4 help for only a single cell in a table

Dear All,
The requirement here is to provide input help for only a particular cell in a table.
This cannot be achieved by assigning search help to the attribute of the context as this will render all the cells of that particular column with F4 help. I tried applying the cell variant concept but only go up to a certain extent.
I tried OVS as well. But for this to work we need to lead select the entry and then go ahead with F4, which will make is inconvenient for the user.
I even searched the forum for some answers, but i could only go to a certain extent with the help of those.
So, if anyone out there has any idea, please help me out. Also, if this is a repeat post by any chance (i think not) kindly provide me with the link of the original.
Thanks and Best Regards,
Pramod

I am running older versions, so i didn't find any sample dynpros..
You can try with this peace of code..nyways..
DATA: LR_TABLE TYPE REF TO CL_WD_TABLE.
DATA: LR_COLUMNS TYPE CL_WD_table_column=>tt_table_column.
DATA: LR_COLUMN TYPE REF TO CL_WD_TABLE_COLUMN.
DATA: LR_EDITOR TYPE REF TO CL_WD_VIEW_ELEMENT.
DATA: LR_TEXT   TYPE REF TO CL_WD_TEXT_VIEW.
DATA: BINDING TYPE STRING.
DATA: LR_CELL TYPE REF TO CL_WD_TABLE_STANDARD_CELL.
IF FIRST_TIME EQ ABAP_TRUE.
LR_TABLE ?= VIEW->GET_ELEMENT( 'TBL_COMPONENTS' ).
LR_COLUMNS = LR_TABLE->GET_COLUMNS( ).
LOOP AT LR_COLUMNS INTO LR_COLUMN.
    LR_EDITOR ?= LR_COLUMN->GET_TABLE_CELL_EDITOR( ).
    BINDING = LR_EDITOR->BOUND__PRIMARY_PROPERTY( ).
    IF BINDING EQ 'RRSO.SOCOMP.POSNR' OR
       BINDING EQ 'RRSO.SOCOMP.MATNR' OR
       BINDING EQ 'RRSO.SOCOMP.KWMENG' OR
       BINDING EQ 'RRSO.SOCOMP.NETPR' OR
       BINDING EQ 'RRSO.SOCOMP.POPRICE' OR
       BINDING EQ 'RRSO.SOCOMP.QUANTITY'.
       LR_CELL = CL_WD_TABLE_STANDARD_CELL=>NEW_TABLE_STANDARD_CELL( VIEW = VIEW
                            VARIANT_KEY = 'TOTAL' ).
       IF BINDING EQ 'RRSO.SOCOMP.QUANTITY'.
         LR_TEXT = CL_WD_TEXT_VIEW=>NEW_TEXT_VIEW( VIEW = VIEW
                                                   TEXT = 'Total'
                                                   H_ALIGN = CL_WD_TEXT_VIEW=>E_H_ALIGN-FORCED_RIGHT ).
       ELSE.
         LR_TEXT = CL_WD_TEXT_VIEW=>NEW_TEXT_VIEW( VIEW = VIEW ).
       ENDIF.
       LR_CELL->SET_EDITOR( LR_TEXT ).
    ENDIF.
     LR_COLUMN->ADD_CELL_VARIANT( LR_CELL ).
ENDLOOP.
ENDIF.
This code is for setting Text View as cell editor, instead text view u can take input field and use bind_value method to bind with another context attribute.
Abhi

Removing header, border for only single column in mx:DataGrid

Hi,
I am using Flex4 SDK and FlashBuilder4.
I have a requirement where i need to remove column header, borders and grid lines for only last column in datagrid.
It should look like there is no column present. This column will be used to show some icon for only selected row.
Can any one suggest how to implement this. Please provide any sample if you can.
Thanks

hi Johnny, it was helpfull for me.
With the given example i am still getting the grid line gaps with the selected row or hover color between verticle cells of the column.
As gridlines can only be removed for complete datagrid not for a single column. is it possible ?
Thanks

How to get the text field in the header for only first page of the report

Hi,
I am developing reports in BI Publisher Enterprise where i am facing problem i.e., i have to get some text field in header,for only first page in the result but it is displaying in all the other pages of the report in result.So,please if you have any idea of how to solve it, please reply.It is required as early as possible.
Thanks in Advance

Invalid path? What are you doing? Writing the report output to an invalid directory?
Where are your terms and conditions? It would be very easy just to put them in a database table and select them in your report query.

Can I show a data label for only one point in a series?

Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
There are a number of graphs where I only want to value of either an extreme value or the ending value to show. Having all the labels in a series makes the chart too busy. This is pretty easy to do in Excel.
If this can't be done, I guess that adding a text box over those points would work.
Thanks

Hi W-T,
Welcome to Apple Discussions and the Numbers '09 forum.
wahoo_tiger wrote:
Forgive a newbie question from an Excel convert, but can I show a value label for only one point in a data series? If yes, how?
Sure. Here's and example labeling only the MIN and MAX points.
Column B contains the data charted with the blue line.
Column C extracts the MIN and MAX values using the formula below. Those two values are charted as a separate series, using the green data point markers, and are labeled with their values. The intervening empty string values appear to have doused the lines connecting the two data points.
Formula: =IF(OR(B=MAX(B),B=MIN(B)),B,"")
Regards,
Barry

Birthday calendar for only some of my contacts are showing up twice in my iPhone. They are not showing up twice tho on my iMac. No, I do not have duplicate names in my address book either. Any idea how to fix that?

my birthday events for only some of my contacts are showing up twice in my iPhone. They are not showing up twice tho on my iMac. No, I do not have duplicate names in my address book either. Any idea how to fix that?

I have uploaded the InDesign file so that you can take a closer look at:
http://www.hsdesign.comuf.com/downloads/
The file is called "Template_File.indd"
So, as discussed the main issues are:
1) The TOC doesn't generate all the listings (only those with the applied paragraph style "Heading 1 - Appendix")
2) When I try to create a new pargraph style and apply it to existing or new text, it reads the pargraph style in the Paragraph Style menu, but the style doesn't actually apply.
Hopefully you can figure something out from this. I really appreciate your help.
Thanks!

Changing DB character set for only one schema

We are interested in changing the characterset of only one user from Western European to AL32UTF8.
Could you please verify if the following steps will be correct to do the same.
1. Run CSScan on the one user
2. Fix any issues
3. Export that one user (with NLS_LANG set to <your old database character set>)
4. Create a new database in the AL32UTF8 character set
5. Import that one user into the new database (with NLS_LANG set to <your old database character set>)

Actually your title is a little incorrect. You are not changing CS for only one schema in existing DB which is not possible. You are trying to migrate a schema to new CS DB. Which is totally doable and your approach is mostly correct.
Database Character Set Scanner provide user scan mode
http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/ch12scanner.htm#i1006013
Mostly the issue could be data truncation, especially if you have column defined using char or varchar2 vs nchar and nvarchar2
because char/varchar is defined in bytes, AL32UTF8 is multi-bytes char set, some character of your old data could saved more than 1 bytes in new DB and can't fit into the column size.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.

Apple apps store do double charged me for only one application purchased and i can't find an email of apple customer service.
<Email Edited By Host>

These are user-to-user forums - I've asked the hosts to remove your email address from your post.
Tou can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

How do I set up an indicator to display for only 1 second?

How do I set up an indicator to display for only 1 second?
I am reading keys from a serial device and I turn on an indicator that corresponds to the key pressed
on the serial device but how do I set this up so that it only stays lit (enabled) for a second or two?
The indicator is inside of a case statement and turns on OK but I do not want it to stay on for more than
a second or two. How do I modify this to display for only a second or two?
(P.S. I am running an old version 8.2 and can only see vis that are 8.2 or older.)
thanks

Simplest way to turn the indicator off (false value) after a set time is to use a Sequence structure (flat or stacked).
Frame 1, set to true,
Frame 2, Wait ms (wire millisecond value to wait)
Frame 3, set to false.
This method, however, prevents the code outside the case structure from running during that wait time.
Something more elaborate will allow the external code to run. What comes to mind is a shift register that holds the indicator name and the time stamp (in milliseconds) when it was turned on, in an array of clusters. Each iteration of your loop will check this register to see if a certain time has passed (current time stamp minus turn on time). If so, use a case structure to turn the indicator off and remove the elements from the shift register array (so you don't keep setting the indicator to false). The array will let you control multiple indicators independently.
A problem with this option could arise from multiple readings. Lets say you want to turn it off after 2 seconds, but you read the value again after 1 second (this means the indicator should be on for a total of 3). The code would still turn it off after the 2 second mark. Of course this really depends on the time intervals involved with your code.

Images burn into the screen after being there for only a few minutes?

What's wrong with my mac if images burn into the screen after being there for only a few minutes?
I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?

Hi,
Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
We can also boot into clean boot mode, test the issue.
http://support.microsoft.com/KB/929135
Run a virus scan to eliminate some malware\virus
Similiar issue
https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral
Yolanda Zhu
TechNet Community Support

WLC5508 for only HREAP/FlexConnect?

Similar Messages

Maybe you are looking for