WLS 5.1 SP9 Hangs

I'm trying to troubleshoot a situation in which an WLS based application is
hanging on an HP system running UX 11.0. When the problem happens, the CPU
utilization on the box goes to 100% and the instance of WLS stops
responding. We had started the process and left running in the foreground
and tried generating a thread dump at the point of the hang with a kill -3
on the pid, but no data is produced. Anyone have any suggestions?
Thanks,
J

Hi.
What is the full version of your JDK?
If you haven't already done so you might want to look into tuning your HPUX
kernel as described in
http://edocs.bea.com/wls/platforms/hpux/index.html#hpux11
Does this occur randomly or regularly? Does this happen under high load? low
load? Is there any other way to characterize the circumstances for this hang?
Regards,
Michael
John Doe wrote:
I'm trying to troubleshoot a situation in which an WLS based application is
hanging on an HP system running UX 11.0. When the problem happens, the CPU
utilization on the box goes to 100% and the instance of WLS stops
responding. We had started the process and left running in the foreground
and tried generating a thread dump at the point of the hang with a kill -3
on the pid, but no data is produced. Anyone have any suggestions?
Thanks,
J--
Michael Young
Developer Relations Engineer
BEA Support

Similar Messages

Platform Support for WLS 5.1 SP9 and / or WLS 6.x

When will BEA support WLPS with either WLS 5.1 SP9 or WLS 6.x?

Should have been more specific:
When will BEA support WLPS __3.2__ with either WLS 5.1 SP9 or WLS 6.x? The
docs say it currently only supports WLS 5.1 sp6/sp8, depending on platform.
Are there plans for BEA to support WLPS __3.5__ with WLS 5.1 SP9? The doc
says it currently only supports WLS 6.x
Jesus M. Salvo Jr. wrote:
>
When will BEA support WLPS with either WLS 5.1 SP9 or WLS 6.x?

Re: Starting WLS 5.1 SP9 w/ JDK 1.3

SP9 ships a new (compatible with JDK 1.3) version of wlconfig & wlserver.exe
Pls see SP9 release notes.
kumar
James Nuzzi wrote:
Hello,
I have seen a lot of posts about this error, but I cannot find a solution to
my problem. I am running WLS 5.1 SP9 with JDK 1.3 on W2K SP1. I can start
WLS fine using StartWeblogic.cmd but I cannot start it using wlserver.exe
(Start/Programs/Weblogic 5.1.0/Weblogic Server). Here is the error:
Java Ver: 1.3 C:\jdk1.3
"DumpThreads" is not defined.
Weblogic server can not be run in your jvm.
loadIt: InitFunctions returned error (2)
The Windows registry is misconfigured
for the WebLogic Server
Can't start WebLogic Server: (Can't start Java VM) err=0x2000001
Any help on this would be appreciated.
Thank You

I am using the new version of wlconfig & wlserver.exe that came with SP9.
Are there any new settings that I need to set wuth wlconfig.exe?
Thanks
"Kumar Allamraju" <[email protected]> wrote in message
news:[email protected]..
SP9 ships a new (compatible with JDK 1.3) version of wlconfig &wlserver.exe
Pls see SP9 release notes.
kumar
James Nuzzi wrote:
Hello,
I have seen a lot of posts about this error, but I cannot find a
solution to
my problem. I am running WLS 5.1 SP9 with JDK 1.3 on W2K SP1. I canstart
WLS fine using StartWeblogic.cmd but I cannot start it usingwlserver.exe
(Start/Programs/Weblogic 5.1.0/Weblogic Server). Here is the error:
Java Ver: 1.3 C:\jdk1.3
"DumpThreads" is not defined.
Weblogic server can not be run in your jvm.
loadIt: InitFunctions returned error (2)
The Windows registry is misconfigured
for the WebLogic Server
Can't start WebLogic Server: (Can't start Java VM) err=0x2000001
Any help on this would be appreciated.
Thank You

Availability date for WLS 5.10 SP9 ?

Is there a planned availability date for WLS 5.1 SP9, specifically
the 128-bit version ? I could of sworn that I've seen a page on
BEA's site that listed the scheduled releases dates for the service
packs, but I can't seem to find it any longer. Has anyone seen
somthing like that ?
Thanks.

contact [email protected]
David Brown wrote:
Is there a planned availability date for WLS 5.1 SP9, specifically
the 128-bit version ? I could of sworn that I've seen a page on
BEA's site that listed the scheduled releases dates for the service
packs, but I can't seem to find it any longer. Has anyone seen
somthing like that ?
Thanks.

Starting WLS 5.1 SP9 w/ JDK 1.3

Hello,
I have seen a lot of posts about this error, but I cannot find a solution to
my problem. I am running WLS 5.1 SP9 with JDK 1.3 on W2K SP1. I can start
WLS fine using StartWeblogic.cmd but I cannot start it using wlserver.exe
(Start/Programs/Weblogic 5.1.0/Weblogic Server). Here is the error:
Java Ver: 1.3 C:\jdk1.3
"DumpThreads" is not defined.
Weblogic server can not be run in your jvm.
loadIt: InitFunctions returned error (2)
The Windows registry is misconfigured
for the WebLogic Server
Can't start WebLogic Server: (Can't start Java VM) err=0x2000001
Any help on this would be appreciated.
Thank You

After applying SP9, we are getting this exact message also. I see nothing
relevant in the "release" notes. It is interesting that you can start the
server up using the startWebLogic.cmd script. It is the wlserver.exe
program that is choking.
"James Nuzzi" <[email protected]> wrote in message
news:3addae50$[email protected]..
Hello,
I have seen a lot of posts about this error, but I cannot find a solutionto
my problem. I am running WLS 5.1 SP9 with JDK 1.3 on W2K SP1. I canstart
WLS fine using StartWeblogic.cmd but I cannot start it using wlserver.exe
(Start/Programs/Weblogic 5.1.0/Weblogic Server). Here is the error:
Java Ver: 1.3 C:\jdk1.3
"DumpThreads" is not defined.
Weblogic server can not be run in your jvm.
loadIt: InitFunctions returned error (2)
The Windows registry is misconfigured
for the WebLogic Server
Can't start WebLogic Server: (Can't start Java VM) err=0x2000001
Any help on this would be appreciated.
Thank You

Active X Plugin in WLS 5.1, SP9

Hello ,
is it possible to integrate an Active X-Plugin in WLS?
Regards
Harry

I am very surprised that nobody replied for the question, even the weblogic support
people. Why is that? Is that very hard a question? Please respond.
Thanks,
GANESH BALACHANDRAN
Ganesh Balachandran <[email protected]> wrote:
We are using Weblogic Server 5.1 SP9. For connection pooling we are using
"weblogic.jdbc.oci.Driver". We are having jdk version 1.3, Weblogic
jDriver for Oracle. We would like to know whether this version of WLS
5.1 SP 9 supports JDBC 2.0 or not?

WLS 5.1 sp9 and ACL exception! Urgent!

Hi:
My applcation runs correctly on sp8.
Now even some of my jsp cannot run correctly with sp9. It also
compliants security exception. But strangely the first time WLS compiles
the
jsp, it can run correctly, the data is shown in the browser. But once
the
jsp is compiled, all subsequent call of this jsp will resort to
assertion
error.
Funny, seems the reason is that WLS sp9 changes the steteful beans
security checking. Previously the checking seems to be when the home is
obtained, now the checking seems to be in the time only the method is
called.
I am uisng bean home cache. Is it the cause of this error? I can get
around this by giving the jndi to guest, but it is not what i want. I
still
want to protect my beans jndi.
I need the solution urgently. Otherwise i have to roll back to sp8.
Thanks.
minjiang
See the stack trace below:
Mon Jul 02 16:36:58 SGT 2001: <EJB JAR deployment
d:/weblogic/myserver/kbf_de
ploy/ordermgr.jar> Transaction: '994062053580_3435' rolled back due to
EJB
excep
tion:
javax.naming.NoPermissionException: User guest does not have lookup
permission
on kbf
at
weblogic.jndi.internal.NamingSecurityManagerImpl.checkPermission(Nami
ngSecurityManagerImpl.java:100)
at
weblogic.jndi.internal.NamingSecurityManagerImpl.checkLookup(NamingSe
curityManagerImpl.java:45)
at
weblogic.jndi.toolkit.BasicWLContext.resolveName(BasicWLContext.java:
737)
at
weblogic.jndi.toolkit.BasicWLContext.lookup(BasicWLContext.java:133)
at javax.naming.InitialContext.lookup(InitialContext.java:354)
at
weblogic.ejb.internal.StatefulEJBHome.wrapEJBObject(StatefulEJBHome.j
ava:170)
at
weblogic.ejb.internal.StatefulEJBHome.findOrCreateEJBObject(StatefulE
JBHome.java:275)
at
weblogic.ejb.internal.StatefulEJBHome.findOrCreateEJBObject(StatefulE
JBHome.java:258)
at
com.kbf.ejb.order.OrderBeanHomeImpl.findByPrimaryKey(OrderBeanHomeImp
l.java:98)
at
com.kbf.ejb.order.OrderBeanHomeImpl_ServiceStub.findByPrimaryKey(Orde
rBeanHomeImpl_ServiceStub.java:262)
at
com.kbf.ejb.ordermgr.OrderManagerBean.getOrders(OrderManagerBean.java
:695)
at
com.kbf.ejb.ordermgr.OrderManagerBeanEOImpl.getOrders(OrderManagerBea
nEOImpl.java:872)
at
com.kbf.ejb.ordermgr.OrderManagerBeanEOImpl_ServiceStub.getOrders(Ord
erManagerBeanEOImpl_ServiceStub.java:311)
at
com.kbf.webremotemgr.WebRemoteMgr.getOrders(WebRemoteMgr.java:1500)
at jsp_servlet._orderview._jspService(_orderview.java:349)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:120)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:915)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:879)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:269)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:365)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:253)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)

Actually this is wrong. The "guest" prompts me to type in the "system"
credentials, before it can run everyting correctly.
So i must still miss out something.
Can anybody help me solve this?
mj
minjiang wrote:
Hi:
After i set this, it works for my jsp.
weblogic.allow.execute.weblogic.servlet=guest
Previously it is =everyone.
So can anyone tell me what the difference is between everyone and guest?
I thought they are same.
And, i still have one problem with my beans. See my next post.
Thanks.
minjiang
minjiang wrote:
Hi:
My applcation runs correctly on sp8.
Now even some of my jsp cannot run correctly with sp9. It also
compliants security exception. But strangely the first time WLS compiles
the
jsp, it can run correctly, the data is shown in the browser. But once
the
jsp is compiled, all subsequent call of this jsp will resort to
assertion
error.
Funny, seems the reason is that WLS sp9 changes the steteful beans
security checking. Previously the checking seems to be when the home is
obtained, now the checking seems to be in the time only the method is
called.
I am uisng bean home cache. Is it the cause of this error? I can get
around this by giving the jndi to guest, but it is not what i want. I
still
want to protect my beans jndi.
I need the solution urgently. Otherwise i have to roll back to sp8.
Thanks.
minjiang
See the stack trace below:
Mon Jul 02 16:36:58 SGT 2001: <EJB JAR deployment
d:/weblogic/myserver/kbf_de
ploy/ordermgr.jar> Transaction: '994062053580_3435' rolled back due to
EJB
excep
tion:
javax.naming.NoPermissionException: User guest does not have lookup
permission
on kbf
at
weblogic.jndi.internal.NamingSecurityManagerImpl.checkPermission(Nami
ngSecurityManagerImpl.java:100)
at
weblogic.jndi.internal.NamingSecurityManagerImpl.checkLookup(NamingSe
curityManagerImpl.java:45)
at
weblogic.jndi.toolkit.BasicWLContext.resolveName(BasicWLContext.java:
737)
at
weblogic.jndi.toolkit.BasicWLContext.lookup(BasicWLContext.java:133)
at javax.naming.InitialContext.lookup(InitialContext.java:354)
at
weblogic.ejb.internal.StatefulEJBHome.wrapEJBObject(StatefulEJBHome.j
ava:170)
at
weblogic.ejb.internal.StatefulEJBHome.findOrCreateEJBObject(StatefulE
JBHome.java:275)
at
weblogic.ejb.internal.StatefulEJBHome.findOrCreateEJBObject(StatefulE
JBHome.java:258)
at
com.kbf.ejb.order.OrderBeanHomeImpl.findByPrimaryKey(OrderBeanHomeImp
l.java:98)
at
com.kbf.ejb.order.OrderBeanHomeImpl_ServiceStub.findByPrimaryKey(Orde
rBeanHomeImpl_ServiceStub.java:262)
at
com.kbf.ejb.ordermgr.OrderManagerBean.getOrders(OrderManagerBean.java
:695)
at
com.kbf.ejb.ordermgr.OrderManagerBeanEOImpl.getOrders(OrderManagerBea
nEOImpl.java:872)
at
com.kbf.ejb.ordermgr.OrderManagerBeanEOImpl_ServiceStub.getOrders(Ord
erManagerBeanEOImpl_ServiceStub.java:311)
at
com.kbf.webremotemgr.WebRemoteMgr.getOrders(WebRemoteMgr.java:1500)
at jsp_servlet._orderview._jspService(_orderview.java:349)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:120)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:915)
at
weblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletCon
textImpl.java:879)
at
weblogic.servlet.internal.ServletContextManager.invokeServlet(Servlet
ContextManager.java:269)
at
weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.jav
a:365)
at
weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:253)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)

SAPINST for EP 6.0 SP9 hangs

I am trying to install SP9 on our Portal. After starting SAPINST, everything seems to be fine (stopping J2EE server). The installation hangs on "Deploy offline".
In the log file the last message is:
"==============================================Info: = Starting to execute command 'jstartup' =Info: ==============================================Info: Starting SDM - Software Deployment Manager...Starting SDM - Software Deployment Manager...Info: tc/SL/SDM/SDM/sap.com/SAP AG/6.4009.00.0000.20040910093614.0000tc/SL/SDM/SDM/sap.com/SAP AG/6.4009.00.0000.20040910093614.0000Info: SDM operation mode successfully set to: IntegratedInitializing Network Manager (50017)Info: Initializing Network Manager (50017)Checking if another SDM is running on port 50018Info: Checking if another SDM is running on port 50018Info: Operationmode for JStartupFramework has already been set to "integrated".Operationmode for JStartupFramework has already been set to "integrated".Successfully executed. Return code: 0Info: Successfully executed. Return code: 0
We are upgrading from SP7 to SP9.
All help is appreciated.
Erik

I got the same error when I installed SP7. I checked the log file cmd.exe.log under C:\Program Files\sapinst_instdir and found that SDM server couldn't be started. So I opened SAPMMC (management console) and found that for some reason the central instance couldn't be started. So I manually started it from the console by right clicking the server. (This would start jcontrol.exe and start dispatcher, server and SDM.) After that, SDM could be connected and the installation continued. But I don't know why jcontrol.exe couldn't be started from the installation.
Check your cmd.exe.log and see whether you got the same error as I did.

Defeat denial of service attacks: New feature in WLS 5.1 SP9

 Hi all,
 SP 9 for WLS 5.1 provides 2 new properties to prevent denial of service attacks
 (ISSUE 31269).
 The properties are weblogic.httpd.maxPostSize and weblogic.httpd.maxPostTimeSecs.
 However I miss more detailed information about the use of the properties, for
 example: Aer there default values
 whcih are used when I don't set the properties? Is there a geberal recommendation
 for values to which the properties could be set?
 What is the unit for the properties (bytes or kbytes for maxPostSize)?
 Has anybody used the new feature already?
 Thanks in advance
 Dieter


in WLS 6.0 I believe the default is -1, which means infinite post size and
secs. I don't think there's any recommended values for these. It all depends
on how large your post size may be.
"Dieter Arnold" <[email protected]> wrote in message
news:3afa4fcb$[email protected]..
>
Hi all,
SP 9 for WLS 5.1 provides 2 new properties to prevent denial
of service attacks (ISSUE 31269). The properties are
weblogic.httpd.maxPostSize and
weblogic.httpd.maxPostTimeSecs.
However I miss more detailed information about the use of the
properties, for example: Aer there default values whcih are
used when I don't set the properties? Is there a geberal
recommendation for values to which the properties could be
set? What is the unit for the properties (bytes or kbytes for
maxPostSize)?
Has anybody used the new feature already?
Thanks in advance
Dieter

Defeat denialof service attack: New feature in WLS 5.1 SP9

Hi all,
SP 9 for WLS 5.1 provides 2 new properties to prevent denial
of service attacks (ISSUE 31269). The properties are
weblogic.httpd.maxPostSize and
weblogic.httpd.maxPostTimeSecs.
However I miss more detailed information about the use of the
properties, for example: Aer there default values whcih are
used when I don't set the properties? Is there a geberal
recommendation for values to which the properties could be
set? What is the unit for the properties (bytes or kbytes for
maxPostSize)?
Has anybody used the new feature already?
Thanks in advance
Dieter

in WLS 6.0 I believe the default is -1, which means infinite post size and
secs. I don't think there's any recommended values for these. It all depends
on how large your post size may be.
"Dieter Arnold" <[email protected]> wrote in message
news:3afa4fcb$[email protected]..
>
Hi all,
SP 9 for WLS 5.1 provides 2 new properties to prevent denial
of service attacks (ISSUE 31269). The properties are
weblogic.httpd.maxPostSize and
weblogic.httpd.maxPostTimeSecs.
However I miss more detailed information about the use of the
properties, for example: Aer there default values whcih are
used when I don't set the properties? Is there a geberal
recommendation for values to which the properties could be
set? What is the unit for the properties (bytes or kbytes for
maxPostSize)?
Has anybody used the new feature already?
Thanks in advance
Dieter

Web as 640 sp9 hangs by step "deploy via SDM/J2EE"

Hi,
I tried to install the sp9 for many times - very frustrating - can anyone help please ?
Follwing products have been installed:
1. webas 640, sp3
2. webas 640, sp8
3. ep6 sp3
4. ep6 sp6
5. But now it struggles - I have problems with applying the patch 9 to webas , the steps until to "deploy online" were sucessfull, but the step "deploy via SDM/J2EE" has an error. In the SAP MMC the process SDM was yellow, and stopped. The file callSdmViaSapinst.log shows:
Nov 24, 2004 8:48:18 AM Info: SDM operation mode successfully set to: Integrated
Nov 24, 2004 8:48:18 AM Info: Initializing Network Manager (50017)
Nov 24, 2004 8:48:19 AM Info: Checking if another SDM is running on port 50018
Nov 24, 2004 8:48:19 AM Error: Could not start SDM - another Server may be running already.
Nov 24, 2004 8:48:19 AM Error: Another SDM is running already for this SDM_HOME directory. Exiting. Throwable: com.sap.sdm.client_server.launch.SDMRunningException Throwable message: Another SDM instance is running on this host
So I stopped the SDM with stopserver, started it again with start sdm jstartup "mode=standalone"
and restarted sapinst - now it worked until the component com.sap.rprof.remoteProfile , now I have the message:
ERROR: NOT updated. The Deploy Service returned the following error: For detailed information see the log file of the Deploy Service. Exception is:
com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers.
What now ? I stopped the server, restarted the sapinst from the beginning - the same result. Whats wrong ?
Thanx a lot,
Martin

I had this same SDM issue during an install. I simply stopped and started the instance. and then restarted the install.
However I would review the consiole logs and see why the server would not be running. If the server starts up and then dies it is probably something related to the java paramters. If you changed the paramters via configtool and you properly apply them, I would restart the instance and then kick of install again...
This process worked for me.
Hope this helps,
John

JSP Compile problem with WLS 5.1 sp9

Hi All,
          The attached, simple JSP file uses a custom tag, and some JavaScript. When
          this is compiled into Java, the Java that is created is Bad. It seems as if
          WLS is having problems properly escaping single-quotes and double-quotes.
          Also attached, is the generated Java file. Note around line 82, and compare
          that to around line 15 of the JSP.
          Does anyone have an idea what can be done to fix this? This JSP compiles
          fine under Tomcat 3.2.
          Thanx!
          Will Hartung
          ([email protected])
          [test.jsp]
          [_test.java]


Hi All,
          The attached, simple JSP file uses a custom tag, and some JavaScript. When
          this is compiled into Java, the Java that is created is Bad. It seems as if
          WLS is having problems properly escaping single-quotes and double-quotes.
          Also attached, is the generated Java file. Note around line 82, and compare
          that to around line 15 of the JSP.
          Does anyone have an idea what can be done to fix this? This JSP compiles
          fine under Tomcat 3.2.
          Thanx!
          Will Hartung
          ([email protected])
          [test.jsp]
          [_test.java]

PCK Update to SP9 hangs in SDM

hi there. i'm having trouble upgrading my PCK installation. the WEB AS update seemed to work just fine using SAPInst. Now that it comes to deploying the new AdapterFramework my SDM causes trouble.First time it hung during deployment of the AdapterFramework Core - several packages have been deployed but then it hung when deploying '*security.service'. after 20min i killed sdm and now i cannot get sdm to deploy this SAP-XIAFC-sca file at all since it always hangs/freezes in Step 2 of 4! Even when i restore my backup where no SDM-deployment at all has been done - still the same. any suggestions ? i'm stuck...

In past time, I had the same error. The problem was with memory parameters for SDM. Check memory parameters for SDM.
Regards,
Carlos

Wls 5.1 sp9 clustering (DNS Problem)

Hi all,
 I am trying to create a WLS cluster of 3 instances and the fourth one being
 proxy. All four instances of WLS are on the same machine, and we use
 default subnet mask so they are all in the same LAN.
 The servers in the cluster have started properly and are communicating with
 each other using a IPMulticast. No problem there.
 However, when i request a JSP page giving the proxy servers
 address(http://proxyIP:7001/Hello.jsp) , it is not able to forward it to any
 of the clustered server instances. It is not even giving me a time out
 error or page not found or anything. I am not sure if my DNS entries are
 wrong or if there is any other problem or there is something that i missed.
 Can some one verify this for me please.
 DNS ENTRIES in HOSTS file are as follows :
 127.0.0.1 localhost
 192.200.1.251 server251.bozpivot.com
 192.200.1.252 server252.bozpivot.com
 192.200.1.253 server253.bozpivot.com
 mycluster 192.200.1.251
 mycluster 192.200.1.252
 mycluster 192.200.1.253
 STACK Trace on proxy is as follows :
 Sun Jan 02 10:22:33 GMT+05:30 2000: <ServletContext-General> *.jsp: init
 Sun Jan 02 10:22:33 GMT+05:30 2000:<E> <proxy> Please specify secure port in
 the
 properties. Using default ports 7001/7002 See release notes for more info
 Sun Jan 02 10:22:33 GMT+05:30 2000:<E> <proxy> Please specify secure port in
 the
 properties. Using default ports 7001/7002 See release notes for more info
 Ramesh


Thanks all,
 I got it working, It was not a problem with my DNS entries. I forgot to
 register my JSPServlet, and so all calls to JSP pages were getting into an
 non-ending loop.
 Ramesh
 "ramesh" <[email protected]> wrote in message
 news:[email protected]...
 > Just in case you need to see my proxy servlet configuration :
 >
 > weblogic.httpd.register.*.jsp=weblogic.servlet.internal.HttpClusterServlet
 > weblogic.httpd.initArgs.*.jsp=defaultServers=server251:7001|server252:7001
 >
 >
 weblogic.httpd.register.*.servlet=weblogic.servlet.internal.HttpClusterServl
 > et
 >
 weblogic.httpd.initArgs.*.servlet=defaultServers=server251:7001|server252:70
 > 01
 >
 > weblogic.allow.execute.weblogic.servlet=everyone
 >
 weblogic.httpd.register.cluster=weblogic.servlet.internal.HttpClusterServlet
 >
 weblogic.httpd.initArgs.cluster=defaultServers=server251:7001|server252:7001
 > weblogic.httpd.defaultServlet=cluster
 >
 >
 > "ramesh" <[email protected]> wrote in message
 > news:[email protected]...
 > > Hi all,
 > >
 > > I am trying to create a WLS cluster of 3 instances and the fourth one
 > being
 > > proxy. All four instances of WLS are on the same machine, and we use
 > > default subnet mask so they are all in the same LAN.
 > >
 > > The servers in the cluster have started properly and are communicating
 > with
 > > each other using a IPMulticast. No problem there.
 > >
 > > However, when i request a JSP page giving the proxy servers
 > > address(http://proxyIP:7001/Hello.jsp) , it is not able to forward it to
 > any
 > > of the clustered server instances. It is not even giving me a time out
 > > error or page not found or anything. I am not sure if my DNS entries are
 > > wrong or if there is any other problem or there is something that i
 > missed.
 > > Can some one verify this for me please.
 > >
 > >
 > > DNS ENTRIES in HOSTS file are as follows :
 > >
 > > 127.0.0.1 localhost
 > >
 > > 192.200.1.251 server251.bozpivot.com
 > > 192.200.1.252 server252.bozpivot.com
 > > 192.200.1.253 server253.bozpivot.com
 > >
 > > mycluster 192.200.1.251
 > > mycluster 192.200.1.252
 > > mycluster 192.200.1.253
 > >
 > >
 > > STACK Trace on proxy is as follows :
 > > Sun Jan 02 10:22:33 GMT+05:30 2000: <ServletContext-General> *.jsp:
 > init
 > > Sun Jan 02 10:22:33 GMT+05:30 2000:<E> <proxy> Please specify secure
 port
 > in
 > > the
 > > properties. Using default ports 7001/7002 See release notes for more
 info
 > > Sun Jan 02 10:22:33 GMT+05:30 2000:<E> <proxy> Please specify secure
 port
 > in
 > > the
 > > properties. Using default ports 7001/7002 See release notes for more
 info
 > >
 > > Ramesh
 > >
 > >
 > >
 > >
 >
 >

Servlet redeploy with wls 5.1, sp9

Hi,
 the "reload servlet" command doesn't seem to work from the console in
 wls 5.1: After pressing the corresponding button in the console, I get
 the message:
 <ServletContext-General> GatewayServlet: destroy
 ...but init(ServletConfig config) gets called only once: when the
 servlet is first loaded. After the destroy() call, the servlet is still
 able to process requests, but the init() method doesn't get called
 again...
 Any ideas?
 Javier


[att1.html]

WLS 5.1 SP9 Hangs

Similar Messages

Maybe you are looking for