WLSE SQL1032N No start database manager command was issued
Hello,
i have a problem with my WLSE device.
it seens like db2 database fails to start.
2004@WLSE:diag all
DIAG: IMAGE
*** PASS: Software image verification passed. ***
DIAG: BIOS
*** Drive model does not require BIOS patch. ***
DIAG: DMA
Checking disk for DMA errors *** PASS: NO DMA IO errors found. ***
Checking disk sectors for errors ...*** PASS: NO disk sector errors found. ***
DIAG: DB2CLEAN *** PASS: No dump files found. ***
DIAG: DB2VERIFY *** FAIL: Cannot connect to DB2. Integrity verification failed. ***
DIAG: SERIALNO *** Serial Number -???????? ***
2004@WLSE:service status
Process= TFTP
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WirelessSvcMgr
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WLSEjobvm
State = Running but busy flag set
Info = WLSEjobvm started.
Process= WLSEFaults
State = Running normally
Info = WLSEFaults is ready.
Process= CDPbrdcast
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WLSEIdleServer
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WLSERepository
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= HaMibDaemon
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= WebServer
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= Tomcat
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= ExcepReporter
State = Program started - No mgt msgs received
Info = Application started by administrator request.
Process= PerfMon
State = Program started - No mgt msgs received
Info = Application started by administrator request.
snmpd (pid 1854) is running...
Database test failed
FAIL Version and product query result was:
SQL1032N No start database manager command was issued. SQLSTATE=57019
Any idea??? is it possible to start the database manager without restoring the database?
Thank you in advanced.
This happens when the database of WLSE is corrupted. Use " reinitdb " command to reinitialize the database. Then try to stop the service for 5 mins and start again.
Similar Messages
-
PDF error: a start doc printer call was issued. PDF on Ne11.
adobe version. 6.0 pro
when converting any doc to PDF it comes up with error. you file could not be printed due to an error on Adobe PDF on Ne11.
-i tried to resinstall the app no luck.
-tried in Word, excel, Autocad noluck.
- i have several other machines and it works fine.
Please help!
Thanks,
MikeSorry for the delay, May I know the version of Microsoft Office you are having? I got your screen shots. Acrobat 6 Pro is compatible with AutoCAD 2000, 2000i, 2002 (but not 2002 LT), and 2004. You are having 2007 version. Again for Microsoft Office compatibility please check the link below. Make sure the Acrobat 6 is compatible with the Office and AutoCAD you are having.
http://kb2.adobe.com/cps/333/333504.html -
No login command was found for 'WebLogic Server 10.3.5.0 - in managed serve
i am getting following warning when i run my web logic managed server
No login command was found for 'WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Oracle WebLogic Server Module Dependencies 10.3 Thu Mar 3 14:37:52 PST 2011 Oracle WebLogic Server on JRockit Virtual Edition Module Dependencies 10.3 Thu Feb 3 1.
Would appreciate suggestions to resolve.
Thanks.Hi,
Add -Dweblogic.StdoutDebugEnabled flag while starting the managed server and then post the verbose error message in your next post
For setting the flag follow the below steps
If your using Linux box and not using node manager to start the managed server,add the below line startManagedWebLogic.sh file
JAVA_OPTIONS="-Dweblogic.StdoutDebugEnabled=true ${JAVA_OPTIONS}"
echo "JAVA_OPTIONS=${JAVA_OPTIONS}"
If your using Windows box and not using node manager to start the managed server,add the below line startManagedWebLogic.cmd file
set JAVA_OPTIONS=-Dweblogic.StdoutDebugEnabled=true %JAVA_OPTIONS%
echo JAVA_OPTIONS=%JAVA_OPTIONS%
If you are starting the Managed server through the node manager then use these flags From Admin console : servers >>>. MS1 >>>> server start >>>> Arguments :-Dweblogic.StdoutDebugEnabled=true
Regards,
Fabian -
Startup command starts database but alter database open read only gives error
Hi,
I'm having some strange behavior. I've 10.2.0.3 database on windows 2003.
The startup command starts database without any issues.
But if I try following it gives error.
startup mount (successful no errors)
alter database open read only; gives error that file Mnnnnnn is missing.
Why this is happening and how to fix it?
Thanks.You really need to show us exactly what Oracle is telling you, using copy and paste, so we can have some clue. You can hide details like instance and host names if they show up.
I'm wondering if you had some messed up offline datafile in a tablespace, where Oracle handles it with startup, but gets upset when you try to open read-only. It's some bizarro sequence of events like: add a datafile to a tablespace, decide that was a mistake, alter it offline, then remove it from the OS without telling Oracle any more about it. I've come back from vacation to find scenarios like this, it winds up being a time-bomb trying to recreate a standby later. Or something like that, I could be unremembering some details. -
Each time I try to start iTunes after it was closed, it wouldn’t start. I have to go to the Task Manager delete Apple Push from processes and only after that iTunes statrs again. What is wrong
Did you manage to get it working mine disappeared after I while I managed to download it but now my laptop/iTunes won't recognise my iPhone!
-
Error: starting remote managed server from command line
I have enabled SSL on the admin server, and configured/added the managed server
via my admin server console. However, when I attempt to start the managed server
via cmd line (script) on the remote machine, I get the following message:
Starting WebLogic Server ....
Connecting to http://adminservermachine:7001...
<Nov 18, 2002 11:42:28 AM EST> <Emergency> <Configuration Management>
<Errors detected attempting to connect to admin server at wk-gferguson:7001 during
initialization of managed server ( null:7001 ). The reported error was: < weblogic.security.acl.DefaultUserInfoImpl
Start server side stack trace:
java.lang.ClassCastException: weblogic.security.acl.DefaultUserInfoImpl
at weblogic.kernel.BootServicesImpl.authenticate(BootServicesImpl.java:189)
at weblogic.kernel.BootServicesImpl.invoke(BootServicesImpl.java:145)
at weblogic.rjvm.RJVMImpl.dispatchRequest(RJVMImpl.java:620)
at weblogic.rjvm.RJVMImpl.dispatch(RJVMImpl.java:581)
at weblogic.rjvm.ConnectionManagerServer.handleRJVM(ConnectionManagerServer.java:164)
at weblogic.rjvm.ConnectionManager.dispatch(ConnectionManager.java:640)
at weblogic.rjvm.t3.T3JVMConnection.dispatch(T3JVMConnection.java:454)
at weblogic.socket.NTSocketMuxer.processSockets(NTSocketMuxer.java:643)
at weblogic.socket.SocketReaderRequest.execute(SocketReaderRequest.java:24)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
End server side stack trace
> This condition generally results when the managed and admin servers are using
the same listen address and port.>
<Nov 18, 2002 11:42:28 AM EST> <Emergency> <Server> <Unable to initialize the
se
rver: 'Fatal initialization exception
Throwable: weblogic.management.configuration.ConfigurationException: weblogic.se
curity.acl.DefaultUserInfoImplThis particular log entry looks like your problem:
<Jan 8, 2010 11:33:30 PM PST> <Error> <Server> <BEA-002606> <Unable to create a server socket for listening on channel "Default". The address 10.249.22.43 might be incorrect or another process is using port 20014: java.net.BindException: Cannot assign requested address.>
Check using netstat to see if that port is already in use.
Shared libraries don't need to be on the classpath, they are deployed similar to applications, so I'm confused by your comment about putting them on the classpath. I assume you're using Node Manager to start the server from the AdminConsole, if you want to use a difference classpath either use the StartupScriptEnabled=true in nodemanager.properties OR put the extra classpath entries on the Server Start tab in the console. -
Starting Managed Server using Node Manager Command Line
Hi,
I've configured the Node Manager and it is connected to the Admin Server without problem. Now I wanted to start the Managed Server through the console but it is failing and my guess is the command line used syntax is not correct.
My question is, how do I change the command line that Node Manager uses to start the Managed Server? I've try using the Server Start tab configuration and it seems like not working. I've also try to update the .properties file for the Managed Server as well.
Each time I look at the Managed Server logs, it is giving me this line...
NodeManager> <Starting WebLogic server with command line: <....>
The command line shown in the logs are not what I've put in the .properties file or the Server Start tab. It is taken from somewhere and I'm not sure where. I just want to configure the command line that Node Manager uses to start a Managed Server.
Hopefully, I'm clear with my problem and someone might be able to assist. Thanks.Great stuff!!
It actually solved my problem. Thanks.
Am just wondering why it didn't work using option 1)? If anyone somehow knows the reason, if not at least it did work for me now. -
Database not start with srvctl command in rac 10g
hi
when i change parameter in sqlnet file
SQLNET.AUTHENTICATION_SERVICES= (NTS) to SQLNET.AUTHENTICATION_SERVICES= (NONE)
then database is not started with srvctl utillity but started with sqlplus enviroment.
please help in this issueuser521214 wrote:
hi,
we are implementing security policy for our client. our databas is on RAC . As per the security, we need to revoke sys dba priviliges. when i used SQLNET.AUTHENTICATION_SERVICES=(NTS) in sqlnet.ora or SQLNET.AUTHENTICATION_SERVICES=(NONE). the instance not start with the following command in rac 10g.
$srvctl start database -d abc
$ crs_stat -t
Name Type Target State Host
ora.db.db application OFFLINE OFFLINE
ora....b1.inst application ONLINE OFFLINE hosttest01
Edited by: user521214 on Apr 21, 2011 4:08 AMIs this the only parameter you changed? What happens when you undo this modification?
What do you see on log files? -
Can not start Enterprise Manager web page
I can not start Enterprise Manager web page.
Here is my steps:
1. Start enterprise manager
emctl start
Waiting for EM to initialize ...Started
2. Check status:
emctl status
EMD is up and running : 200 OK
3. Start the web page
http://myhost:1810/
4. get following error
"There was no response. The server could be down or is not responding"
System info:
Database: 8.1.7.2
OAS: 9.2.0.2
JDK: 1.3.0_02
Server OS: SunOS 5.8
My question is where is the log file of enterprise manager and what the problem is.
Thanks in advance
Dondiego,
Thank you for your help. when I try your command I get following error:
emctl start iasconsole
Unknown command option
Usage::
emctl start|stop|status
emctl reload | upload
emctl set credentials [<Target_name>[:<Target_Type>]]
emctl gencertrequest
emctl installcert [-ca|-cert] <certificate base64 text file>
emctl set ssl test|on|off|password [<old password> <new password>]
emctl set password <new pwd>
emctl authenticate <pwd>
emctl switch home [-silent <new_home>]
emctl config <options>
emctl config options can be listed by typing "emctl config" -
This application has failed to start because SapNi.dll was not found
On the advice, good advice, of Melanie and Lars, here is a new thread for my question.
I'm assisting with a migration of SAPDB, on Windows Server 2003, to MaxDB 7.6.xx on Solaris 10 SPARC.
I can connect to my SAP DB 7.3.0.35 using Database Manager 7.4.3.23 as superdba. Now I'm trying to use the dbmcli.
I go to the server and pop open a cmd prompt and try it via dbmcli:
dbmcli -d sdb -u superdba,<password>
And I get a Windows dialog box that says
This application has failed to start because SapNi.dll was not found. Re-installing the application may fix this problem.
Hello,
actually, the SUPERDBA user only has ONE valid password. Although he is able to perform admin tasks and to execute SQL statements, there are not two passwords for this user!
So if you are able to connect with that user with dbmcli and not with sqlcli or loadercli, there seems to be something wrong with your system/users. Maybe the user called SUPERDBA on your system is not really the SYSDBA but a 'normal' dbm user.
When you connect with that user with dbmcli, please execute the following commands:
sql_execute select user from dual
sql_execute select SYSDBA from dual
sql_execute select * from users
Can you also connect with user control with dbmcli? You might want to check the default password (control).
Regarding the ni.dll problem: If I understand that correctly, you installed Database Studio locally on your PC. Did you also install any othe MaxDB software on that server? When you try to use dbmcli to connect to a remote database, you'll have to specify the -n <hostname> option. Or did you get that dll error on the database server itself?
Database Studio cannot be used to administer databases of version 7.3. You'll have to use DBMGUI or dbmcli for that.
Best regards, Melanie
Hi Melanie, Thanks for the response.
I cannot use dbmcli at the moment. I get the Windows dialog box saying
This application has failed to start because SapNi.dll was not found. Re-installing the application may fix this problem.
I am using dmcli on the Windows 2003 Server with my SAP DB 7.3 installed. Here is the version of dbmcli that I'm using.
C:\sapdb\SDB\db\bin>dbmcli -V
OK
version,os,dbroot,logon,code,swap
"7.6.06","WIN32","C:\Program Files\sdb\7606",True,ASCII,2
I'm going to try to do what the error message tells me and uninstall and re-install my DB management applications.
Thanks,
RichServer Utilities c:/sapdb/programs 7.7.06.09 32 bit valid
DB Analyzer c:/sapdb/programs 7.6.06.03 32 bit valid
PCR 7300 c:/sapdb/programs 7.3.00.35 valid
PCR 7301 c:/sapdb/programs 7.3.01.09 valid
PCR 7104 c:/sapdb/programs 7.1.04.43 valid
MaxDB PHP Driver c:/sapdb/programs 7.6.06.03 32 bit valid
PCR 7240 c:/sapdb/programs 7.2.04.17 valid
Synchronization Manager c:/sapdb/programs 7.6.06.03 valid
Base c:/sapdb/programs 7.7.06.09 32 bit valid
Redist Python c:/sapdb/programs 7.6.06.03 32 bit valid
JDBC c:/sapdb/programs 7.6.05.06 valid
Messages c:/sapdb/programs MSG 0.8215 valid
ODBC c:/sapdb/programs 7.6.06.03 32 bit valid
Database Kernel c:/program files/sdb/7606 7.6.06.03 32 bit valid
Database Kernel c:/sapdb/programs/databasestudio/utilities 7.7.6.9 valid
Database Kernel c:/sapdb/sdb/db 7.3.00.35 32 bit valid
Loader c:/sapdb/programs 7.6.06.03 32 bit valid
SQLDBC c:/sapdb/programs 7.6.06.03 32 bit valid
PCR 7250 c:/sapdb/programs 7.2.05.24 valid
xinstinfo
IndepData : C:\sapdb\data
IndepPrograms : C:\sapdb\programs
dbmcli -s dbm_version
OK
VERSION = 7.7.06
BUILD = DBMServer 7.7.06 Build 009-123-202-944
OS = WIN32
INSTROOT =
LOGON = True
CODE = UTF8
SWAP = full
UNICODE = YES
INSTANCE = (unknown)
SYSNAME = Windows Server 2003 family
MASKING = YES
REPLYTREATMENT = none,zlib,auto
SDBDBM_IPCLOCATION = C:\sapdb\data\wrk
Edited by: Rich Evans on Jun 16, 2009 4:13 PM -
Srvctl change OS user during start database
Scenario:
Aix 7.1
Oracle Grid Infrastructure Standalone Server 11.2.0.3
Patch 16083653: GRID INFRASTRUCTURE PATCH SET UPDATE 11.2.0.3.6 (INCLUDES DB PSU 11.2.0.3.6)
Oracle RDBMS Single Instance Installation 11.2.0.3
Patch 16056266: DATABASE PATCH SET UPDATE 11.2.0.3.6 (INCLUDES CPUAPR2013)
Patch 16036950: N-APPLY PATCH 11.2.0.3 FOR CRITCAL AIX BUGS BUNDLE #1
Owner of Grid Install is grid11g
Owner of RDBMS Install is ora11g
After install both binaries and patches, i created +ASM instance and Diskgroups using raw device (OS user grid11g).
Using DBCA i created a single instance, executing all scripts in manual mode (OS user ora11g).
Add instance to clusterware using:
srvctl add database -d "$SID" -o /ora11g/app/product/11.2.0.3/$SID -p "+DG_$SID_DATA/$SID/spfile$SID.ora" -n "$SID" -a "DG_$SID_DATA"
My problem is:
When i start database with logged user ora11g using command: srvctl start database -d $SID, all process of instance are started with grid owner install (grid11g).
output of ps -ef | grep $SID
grid11g 5439526
1 2 21:04:53
- 0:00 oracle$SID (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
grid11g 5963952
1 0 21:04:35
- 0:00 ora_dbw4_$SID
grid11g 6488118
1 3 21:04:53
- 0:00 ora_m002_$SID
grid11g 6619268
1 0 21:04:35
- 0:00 ora_dbw7_$SID
grid11g 6684858
1 0 21:04:44
- 0:00 ora_o001_$SID
grid11g 6881424
1 0 21:04:35
- 0:00 ora_smon_$SID
grid11g 7078066
1 0 21:04:35
- 0:00 ora_ocf0_$SID
But when i start database using sqlplus /nolog;conn / as sysdba; startup open. All process of instance started with correct owner (ora11g).
output of ps -ef | grep $SID
ora11g 5963950
1 0 20:22:16
- 0:00 ora_s000_$SID
ora11g 6619262
1 0 20:22:15
- 0:00 ora_ckpt_$SID
ora11g 7143426
1 0 20:22:16
- 0:01 ora_mmnl_$SID
ora11g 7340278
1 0 20:22:15
- 0:00 ora_dbw6_$SID
ora11g 7536702
1 0 20:22:15
- 0:00 ora_lgwr_$SID
ora11g 7798912
1 0 20:27:30
- 0:00 ora_smco_$SID
ora11g 7930010
1 0 20:22:15
- 0:00 ora_dbw2_$SID
Has anyone had any similar situation?
Thanks for help
Gustavo
Output:
With ora11g
srvctl config database -d $SID
Database unique name: $SID
Database name:
Oracle home: /ora11g/app/product/11.2.0.3/$SID
Oracle user: ora11g
Spfile:
Domain:
Start options: open
Stop options: immediate
Database role: PRIMARY
Management policy: MANUAL
Database instance: $SID
Disk Groups: DG_$SID_DATA
With grid11g
crsctl stat res ora.$SID.db -p
NAME=ora.$SID.db
TYPE=ora.database.type
ACL=owner:grid11g:rwx,pgrp:dba:r-x,other::r--,group:dba:r-x,user:ora11g:rwx
ACTIVE_PLACEMENT=1
AGENT_FILENAME=%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX%
AUTO_START=never
CARDINALITY=1
CHECK_INTERVAL=1
CHECK_TIMEOUT=30
CLUSTER_DATABASE=false
DATABASE_TYPE=SINGLE
DB_UNIQUE_NAME=$SID
DEFAULT_TEMPLATE=PROPERTY(RESOURCE_CLASS=database) PROPERTY(DB_UNIQUE_NAME= CONCAT(PARSE(%NAME%, ., 2), %USR_ORA_DOMAIN%, .)) ELEMENT(INSTANCE_NAME= %GEN_USR_ORA_INST_NAME%) ELEMENT(DATABASE_TYPE= %DATABASE_TYPE%)
DEGREE=1
DESCRIPTION=Oracle Database resource
ENABLED=1
FAILOVER_DELAY=0
FAILURE_INTERVAL=60
FAILURE_THRESHOLD=1
GEN_AUDIT_FILE_DEST=/ora11g/app/admin/$SID/adump
GEN_START_OPTIONS=open
GEN_USR_ORA_INST_NAME=$SID
INSTANCE_FAILOVER=1
LOAD=1
LOGGING_LEVEL=1
MANAGEMENT_POLICY=MANUAL
OFFLINE_CHECK_INTERVAL=0
ONLINE_RELOCATION_TIMEOUT=0
ORACLE_HOME=/ora11g/app/product/11.2.0.3/$SID
PLACEMENT=balanced
RESTART_ATTEMPTS=1
ROLE=PRIMARY
SCRIPT_TIMEOUT=60
SERVER_POOLS=
START_DEPENDENCIES=weak(type:ora.listener.type,uniform:ora.ons) hard(ora.DG_$SID_DATA.dg)
START_TIMEOUT=600
STATE_CHANGE_TEMPLATE=
STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DG_$SID_DATA.dg)
STOP_TIMEOUT=600
TYPE_VERSION=3.2
UPTIME_THRESHOLD=1h
USR_ORA_DB_NAME=
USR_ORA_DOMAIN=
USR_ORA_ENV=
USR_ORA_FLAGS=
USR_ORA_INST_NAME=$SID
USR_ORA_OPEN_MODE=open
USR_ORA_OPI=false
USR_ORA_STOP_MODE=immediate
VERSION=11.2.0.3.0Hi JollyRoger
At first, I thought it was the command executed with the wrong user and redid the command being careful to be connected with the correct user.
Having the same result.
Following your suggestion, remove database with grid11g user and add with ora11g user. Same result.
I'm thinking of removing the Clustware and RDBMS installation and install infrastructure without patching. After this applying each patches and checking if the user changes. -
Failed to start a managed process after the maximum retry limit
Hi,
Getting the following error
/app/oracle/product/101202/opmn/bin (OID)>opmnctl startproc ias-component=OID
opmnctl: starting opmn managed processes...
================================================================================
opmn id=smtest02:6202
0 of 1 processes started.
ias-instance id=infra.smtest02
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
OID/OID/OID
Error
--> Process (pid=26032)
failed to start a managed process after the maximum retry limit
Log:
/app/oracle/product/101202/opmn/logs/OID~1
Any suggestions
Thanks
KedarHi Alvarez
I have managed to start OID
stop the process using opmnctl stopall
stop the database
stop the listener
stop emctl processes
usind oidctl to stop OID instance
start the listener
start the database
start the process opmnctl startall
start emctl start iasconsole
used oidctl to star instance for OID
/app/oracle/product/101202/bin (OID)>cd ../opmn/bin
/app/oracle/product/101202/opmn/bin (OID)>opmnctl status
Processes in Instance: infra.smtest02
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | 7763 | Alive
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 6183 | Alive
OID | OID | 6187 | Alive
but when i am trying to start dbconsole ( command below) getting follwong error OC4J Configuration issue. /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID not found.
emctl start status dbconsole
/app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_OID ---> /app/oracle/product/101202/oc4j/j2ee/OC4J_DBConsole_smtest02_ORACLEID
where can i change the setting for the parameter so that i can log on to dbconsole from the browser, which config file ?
the reason i needed dbconsole was to use Oracle Directory Naming GUI to configure db to replace old Names Server hence i need Db console GUI
Kedar -
"database manager" does not show up after MaxDB install
We have about 5 MaxDB/LiveCache installations.
Some of them has the "start->all programs->my SQL MaxDB->database manager" , while
some of them do not have above item.
I think there is a PC command to bring above item visible or accessible. Could you help?
P.S. I have used dbmcli to confirm the livecache is running well.
Thanks!> I go to SMP and check software download center->
> My Company's Application Components" MAXDB" MAXDB 7.5 , 7.6, 7.7"
>
> I see : "no data available" for all above.
>
> Do you know why? Thanks!
I cannot know, but I bet there are some license things your company has to check until you can access that area.
Maybe the contract of your company was bound to a different DBMS until now?
Meanwhile you can just download the software from SDN - it's the same software, it's just that it may not be the latest build.
regards,
Lars -
Facing Problem in Starting Weblogic Managed Server
Hi,
While starting a managed server through Weblogic Console it is giving "nodemanager is not running" related error. I am not sure what is happening here. It was working fine earlier.
Thanks
PawanHi,
Please check wheather node manager is running inside the server. Please check the nodemanager listen port in nodemanager.properties file and issue below command from your server.
netstat -a |grep "port"
Regards,
Kishore -
Hi
I am unable to start the Managed server on OBIEE 11.1.1.6.0 , as it is giving the following exception
"[bi_server1] [NOTIFICATION] [] [oracle.wsm.security.policy.scenario.executor.SecurityScenarioExecutor] [tid: RTD_Worker_9] [userId: <anonymous>] [ecid: 0000JxpZwaCDkZ__xPWByW1Hm1HW000001,1:23440] [APP: OracleRTD#11.1.1] [WSM_POLICY_NAME: oracle/wss_username_token_client_policy] Recipient Alias property not configured in the policy. Defaulting to encrypting with signers certificate.
Here I am providing the bi_server1.log, bi_server1.out log,bi_server1-diagnostic.log
Please suggest me workaround to resolve this issue,
thanks in advance
Pavan
bi_server1.log
==========
####<Jun 24, 2013 12:41:40 PM AST> <Info> <WebLogicServer> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900822> <BEA-000000> <WebLogic Server "bi_server1" version:
WebLogic Server 10.3.5.0 Fri Apr 1 20:20:06 PDT 2011 1398638 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Jun 24, 2013 12:41:40 PM AST> <Notice> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900902> <BEA-170019> <The server log file /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/logs/bi_server1.log is opened. All server side log events will be written to this file.>
####<Jun 24, 2013 12:41:40 PM AST> <Info> <Log Management> <10.11.34.111> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1372066900906> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Jun 24, 2013 12:41:40 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066900981> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901098> <BEA-002622> <The protocol "t3s" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "http" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901099> <BEA-002622> <The protocol "https" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901100> <BEA-002622> <The protocol "iiop" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901101> <BEA-002622> <The protocol "iiops" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldap" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901102> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901106> <BEA-002622> <The protocol "cluster" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901107> <BEA-002622> <The protocol "clusters" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "snmp" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002622> <The protocol "admin" is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901109> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <RJVM> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901133> <BEA-000570> <Network Configuration for Channel "bi_server1"
Listen Address :9704
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901212> <BEA-002609> <Channel Service initialized.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000415> <System has file descriptor limits of - soft: 4,096, hard: 4,096>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901243> <BEA-000416> <Using effective file descriptor limit of: 4,096 open sockets/files.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901244> <BEA-000406> <PosixSocketMuxer was built on Jan 10 2008 23:07:45>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901301> <BEA-000436> <Allocating 4 reader threads.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <Socket> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901302> <BEA-000446> <Native IO Enabled.>
####<Jun 24, 2013 12:41:41 PM AST> <Info> <IIOP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066901427> <BEA-002014> <IIOP subsystem enabled.>
####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907382> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Jun 24, 2013 12:41:47 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066907849> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908041> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_LVk1d2v3EBrlDS/rSIpIRiGgLnM=>
####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908346> <BEA-090516> <The RoleMapper provider has preexisting LDAP data.>
####<Jun 24, 2013 12:41:48 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066908755> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909006> <BEA-090516> <The CredentialMapper provider has preexisting LDAP data.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909180> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server bi_server1 for security realm myrealm.>
####<Jun 24, 2013 12:41:49 PM AST> <Notice> <Security> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909181> <BEA-090082> <Security initializing using security realm myrealm.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <Server> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909747> <BEA-002622> <The protocol "[iiop, ldap, http, https, ldaps, cluster-broadcast, admin, iiops, t3s, cluster-broadcast-secure, snmp, t3]" is now configured.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <XML> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909759> <BEA-130036> <Initializing XMLRegistry.>
####<Jun 24, 2013 12:41:49 PM AST> <Info> <messaging.interception> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066909771> <BEA-400000> <Initializing message interception service>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910180> <BEA-280008> <Opening the persistent file store "_WLS_bi_server1" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/store/default requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910314> <BEA-280009> <The persistent file store "_WLS_bi_server1" (fb352aa7-3e6f-4655-b314-8b2cf7d9caa3) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=109.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910462> <BEA-001135> <Initializing the JDBC service.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910473> <BEA-001137> <Initialization complete.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001138> <Resuming the JDBC service.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910474> <BEA-001140> <Resume complete.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910507> <BEA-190000> <Initializing J2EE Connector Service......>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <Connector> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910510> <BEA-190001> <J2EE Connector Service initialized successfully>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910593> <BEA-040305> <JMS service is initialized and in standby mode.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910637> <BEA-040090> <Deployed 8 default connection factories.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory2" with its JNDI name "weblogic.jms.XAConnectionFactory2" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910638> <BEA-040407> <Default connection factory "MessageDrivenBeanConnectionFactory" with its JNDI name "weblogic.jms.MessageDrivenBeanConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory" with its JNDI name "weblogic.jms.XAConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "DefaultConnectionFactory" with its JNDI name "weblogic.jms.ConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910639> <BEA-040407> <Default connection factory "QueueConnectionFactory" with its JNDI name "javax.jms.QueueConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "TopicConnectionFactory" with its JNDI name "javax.jms.TopicConnectionFactory" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory0" with its JNDI name "weblogic.jms.XAConnectionFactory0" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910640> <BEA-040407> <Default connection factory "DefaultXAConnectionFactory1" with its JNDI name "weblogic.jms.XAConnectionFactory1" is started.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910641> <BEA-040306> <JMS service is active now.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910680> <BEA-101128> <Initializing HTTP services.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101135> <bi_server1 is the default Web server.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910697> <BEA-101052> <[HttpServer (defaultWebserver) name: bi_server1] Initialized>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <HTTP> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910700> <BEA-101129> <Initializing the Web application container.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910746> <BEA-180046> <INFO: Logging service enabled.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910749> <BEA-180046> <INFO: TC Configuration Helper instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910750> <BEA-180046> <INFO: TC Task Manager instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910753> <BEA-180046> <INFO: TC security service instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910756> <BEA-180046> <INFO: TC Outbound routing service instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WTC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910758> <BEA-180046> <INFO: TC Transaction service instantiated!>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910770> <BEA-220031> <The server does not support reliable SOAP messaging.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910771> <BEA-220027> <Web Service reliable agents are started on the server.>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <JMX> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910888> <BEA-149512> <JMX Connector Server started at service:jmx:iiop://10.11.34.111:9704/jndi/weblogic.management.mbeanservers.runtime .>
####<Jun 24, 2013 12:41:50 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066910904> <BEA-000256> <Invoking oracle.jrf.wls.JRFStartup.main(null)>
####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911658> <BEA-000256> <Invoking oracle.security.jps.wls.JpsWlsStartupClass.main(null)>
####<Jun 24, 2013 12:41:51 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066911696> <BEA-000256> <Invoking oracle.core.ojdl.weblogic.ODLConfiguration.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912880> <BEA-000256> <Invoking oracle.jrf.AppContextStartup.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912883> <BEA-000256> <Invoking oracle.as.jmx.framework.wls.spi.StartupListener.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912942> <BEA-000256> <Invoking oracle.j2ee.ws.server.WebServiceServerStartup.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912956> <BEA-000256> <Invoking oracle.ias.cache.Startup.main(null)>
####<Jun 24, 2013 12:41:52 PM AST> <Info> <WebLogicServer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <0000JxpZtZhDkZ__xPWByW1Hm1HW000000> <1372066912959> <BEA-000256> <Invoking oracle.dms.wls.DMSStartup.main(null)>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913225> <BEA-141278> <Java entropy configuration is: System property "java.security.egd= null"; JRE's java.security file property "securerandom.source= null"; Assumed Blocking Config= true; JDK version= 1.6.0; Operating System= AIX.>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913226> <BEA-141279> <Detected BLOCKING java entropy configuration. This is the most secure setting, but may cause performance issues on machines with few sources of entropy.>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <Management> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913228> <BEA-141187> <Java system properties are defined as follows:
EPM_ORACLE_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
EPM_ORACLE_INSTANCE = novalue
EPM_REG_PROPERTIES_PATH = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
HYPERION_HOME = /app1/orabi/Oracle/Middleware/Oracle_BI1
XDO_FONT_DIR = /app1/orabi/Oracle/Middleware/Oracle_BI1/common/fonts
bi.oracle.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
com.ibm.cpu.endian = big
com.ibm.oti.configuration = scar
com.ibm.oti.jcl.build = 20110622_1654
com.ibm.oti.shared.enabled = false
com.ibm.oti.vm.bootstrap.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
com.ibm.oti.vm.library.version = 24
com.ibm.vm.bitmode = 64
common.components.home = /app1/orabi/Oracle/Middleware/oracle_common
domain.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
em.oracle.home = /app1/orabi/Oracle/Middleware/oracle_common
epm.useApplicationContextId = false
file.encoding = utf-8
file.separator = /
hyperion.home = /app1/orabi/Oracle/Middleware/Oracle_BI1
ibm.signalhandling.rs = false
ibm.signalhandling.sigchain = true
ibm.signalhandling.sigint = true
ibm.system.encoding = ISO8859-1
igf.arisidbeans.carmlloc = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/carml
igf.arisidstack.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/arisidprovider
java.assistive = ON
java.awt.graphicsenv = sun.awt.X11GraphicsEnvironment
java.awt.headless = true
java.awt.printerjob = sun.print.PSPrinterJob
java.class.path = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jdbc/jdk16/bijdbc.jar::/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxspi.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/app1/orabi/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/java6_64/lib/tools.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/app1/orabi/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.5.0.jar:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/app1/orabi/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/app1/orabi/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/app1/orabi/Oracle/Middleware
java.class.version = 50.0
java.compiler = j9jit24
java.endorsed.dirs = /usr/java6_64/jre/lib/endorsed
java.ext.dirs = /usr/java6_64/jre/lib/ext
java.fullversion = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
J9VM - 20110624_085526
JIT - r9_20101028_17488ifx17
GC - 20101027_AA
java.home = /usr/java6_64/jre
java.io.tmpdir = /tmp/
java.jcl.version = 20110530_01
java.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/usr/java6_64/jre/lib/ppc64/j9vm:/usr/java6_64/jre/lib/ppc64:/usr/java6_64/jre/../lib/ppc64:/app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/native:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/native:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/app1/orabi/Oracle/Middleware/wlserver_10.3/server/native/aix/ppc64:/usr/lib:/usr/lib
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories:weblogic.corba.j2ee.naming.url:weblogic.jndi.factories:weblogic.corba.j2ee.naming.url
java.protocol.handler.pkgs = oracle.mds.net.protocol|weblogic.net
java.runtime.name = Java(TM) SE Runtime Environment
java.runtime.version = pap6460sr9fp2-20110627_03 (SR9 FP2)
java.security.policy = /app1/orabi/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.6
java.util.logging.config.class = oracle.core.ojdl.logging.LoggingConfiguration
java.util.prefs.PreferencesFactory = java.util.prefs.FileSystemPreferencesFactory
java.vendor = IBM Corporation
java.vendor.url = http://www.ibm.com/
java.version = 1.6.0
java.vm.info = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
J9VM - 20110624_085526
JIT - r9_20101028_17488ifx17
GC - 20101027_AA
java.vm.name = IBM J9 VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = IBM Corporation
java.vm.version = 2.4
javax.management.builder.initial = weblogic.management.jmx.mbeanserver.WLSMBeanServerBuilder
javax.rmi.CORBA.PortableRemoteObjectClass = weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.rpc.ServiceFactory = weblogic.webservice.core.rpc.ServiceFactoryImpl
javax.xml.soap.MessageFactory = weblogic.webservice.core.soap.MessageFactoryImpl
jrf.version = 11.1.1
jrockit.optfile = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt
jxe.current.romimage.version = 15
jxe.lowest.romimage.version = 15
oracle.biee.search.bisearchproperties = /app1/orabi/Oracle/Middleware/Oracle_BI1/bifoundation/jee/BISearchConfig.properties
oracle.core.ojdl.logging.applicationcontextprovider = oracle.core.ojdl.logging.WlsApplicationContextImpl
oracle.core.ojdl.logging.componentId = bi_server1
oracle.core.ojdl.logging.config.file = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ovd_11.1.1/templates/ovd-logging.xml
oracle.core.ojdl.logging.usercontextprovider = oracle.core.ojdl.logging.WlsUserContextImpl
oracle.deployed.app.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/tmp/_WL_user
oracle.deployed.app.ext = /-
oracle.domain.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig
oracle.ecsf.configuration.class = oracle.biee.search.services.BISearchServiceConfiguration
oracle.ecsf.security.service = oracle.biee.search.security.BISearchSecurityService
oracle.notification.filewatching.interval = 2000
oracle.security.jps.config = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/jps-config.xml
oracle.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/fmwconfig/servers/bi_server1
org.apache.commons.logging.Log = org.apache.commons.logging.impl.Jdk14Logger
org.omg.CORBA.ORBClass = weblogic.corba.orb.ORB
org.omg.CORBA.ORBSingletonClass = weblogic.corba.orb.ORB
org.xml.sax.driver = weblogic.xml.jaxp.RegistryXMLReader
org.xml.sax.parser = weblogic.xml.jaxp.RegistryParser
os.arch = ppc64
os.encoding = ISO8859-1
os.name = AIX
os.version = 6.1
path.separator = :
platform.home = /app1/orabi/Oracle/Middleware/wlserver_10.3
rtd.instanceName = RTD_bi_server1
server.group = obi
sun.arch.data.model = 64
sun.boot.class.path = /usr/java6_64/jre/lib/ppc64/default/jclSC160/vm.jar:/usr/java6_64/jre/lib/annotation.jar:/usr/java6_64/jre/lib/beans.jar:/usr/java6_64/jre/lib/java.util.jar:/usr/java6_64/jre/lib/jndi.jar:/usr/java6_64/jre/lib/logging.jar:/usr/java6_64/jre/lib/security.jar:/usr/java6_64/jre/lib/sql.jar:/usr/java6_64/jre/lib/ibmorb.jar:/usr/java6_64/jre/lib/ibmorbapi.jar:/usr/java6_64/jre/lib/ibmcfw.jar:/usr/java6_64/jre/lib/rt.jar:/usr/java6_64/jre/lib/charsets.jar:/usr/java6_64/jre/lib/resources.jar:/usr/java6_64/jre/lib/ibmpkcs.jar:/usr/java6_64/jre/lib/ibmcertpathfw.jar:/usr/java6_64/jre/lib/ibmjgssfw.jar:/usr/java6_64/jre/lib/ibmjssefw.jar:/usr/java6_64/jre/lib/ibmsaslfw.jar:/usr/java6_64/jre/lib/ibmjcefw.jar:/usr/java6_64/jre/lib/ibmjgssprovider.jar:/usr/java6_64/jre/lib/ibmjsseprovider2.jar:/usr/java6_64/jre/lib/ibmcertpathprovider.jar:/usr/java6_64/jre/lib/ibmxmlcrypto.jar:/usr/java6_64/jre/lib/management-agent.jar:/usr/java6_64/jre/lib/xml.jar:/usr/java6_64/jre/lib/jlm.jar:/usr/java6_64/jre/lib/javascript.jar
sun.boot.library.path = /usr/java6_64/jre/lib/ppc64/default:/usr/java6_64/jre/lib/ppc64
sun.io.unicode.encoding = UnicodeBig
sun.java.command = weblogic.Server
sun.java.launcher = SUN_STANDARD
sun.jnu.encoding = ISO8859-1
user.country = US
user.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1
user.home = /home/orabi
user.language = en
user.name = orabi
user.timezone = Asia/Riyadh
vde.home = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/ldap
weblogic.MaxMessageSize = 50000000
weblogic.Name = bi_server1
weblogic.ProductionModeEnabled = true
weblogic.ReverseDNSAllowed = false
weblogic.alternateTypesDirectory = /app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/app1/orabi/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1
weblogic.classloader.preprocessor = weblogic.diagnostics.instrumentation.DiagnosticClassPreProcessor
weblogic.ext.dirs = /app1/orabi/Oracle/Middleware/patch_wls1035/profiles/default/sysext_manifest_classpath:/app1/orabi/Oracle/Middleware/patch_ocp360/profiles/default/sysext_manifest_classpath
weblogic.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
weblogic.jdbc.remoteEnabled = false
weblogic.management.clearTextCredentialAccessEnabled = ********
weblogic.management.discover = false
weblogic.management.server = http://10.11.34.111:7001
weblogic.nodemanager.ServiceEnabled = true
weblogic.security.SSL.enableJSSE = true
weblogic.security.SSL.ignoreHostnameVerification = true
weblogic.security.TrustKeyStore = DemoTrust
weblogic.system.BootIdentityFile = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/servers/bi_server1/data/nodemanager/boot.properties
wls.home = /app1/orabi/Oracle/Middleware/wlserver_10.3/server
wlw.iterativeDev = false
wlw.logErrorsToConsole = false
wlw.testConsole = false
xdo.server.config.dir = /app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/config/bipublisher
>
####<Jun 24, 2013 12:41:53 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066913766> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_internal">
####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914573> <BEA-000365> <Server state changed to STANDBY>
####<Jun 24, 2013 12:41:54 PM AST> <Notice> <WebLogicServer> <10.11.34.111> <bi_server1> <main> <<WLS Kernel>> <> <> <1372066914579> <BEA-000365> <Server state changed to STARTING>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914605> <BEA-281003> <SAF Service has been initialized.>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <SAFService> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914612> <BEA-281002> <SAF Service has been started.>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <WseeCore> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914622> <BEA-220502> <The Wsee Service is starting>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <Deployer> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914743> <BEA-149209> <Resuming.>
####<Jun 24, 2013 12:41:54 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066914823> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls9_async_response">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916264> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_cluster_internal">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916333> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bea_wls_deployment_internal">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916428> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "EPMSystemRegistry">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916440> <BEA-001177> <Creating Connection Pool named EPMSystemRegistry, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916455> <BEA-000626> <Free resources in pool "EPMSystemRegistry" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916577> <BEA-001124> <Created Connection Pool named EPMSystemRegistry.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916591> <BEA-001174> <Creating Data Source named EPMSystemRegistry, JNDI Name = jdbc/EPMSystemRegistry.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916642> <BEA-001512> <Data Source EPMSystemRegistry has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916644> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "bip_datasource">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916652> <BEA-001177> <Creating Connection Pool named bip_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916654> <BEA-000626> <Free resources in pool "bip_datasource" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916655> <BEA-001124> <Created Connection Pool named bip_datasource.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916656> <BEA-001174> <Creating Data Source named bip_datasource, JNDI Name = jdbc/bip_datasource.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916676> <BEA-001512> <Data Source bip_datasource has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916678> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "mds-owsm">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916687> <BEA-001177> <Creating Connection Pool named mds-owsm, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = SendStreamAsBlob=true;user=DEV_MDS;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916688> <BEA-000626> <Free resources in pool "mds-owsm" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916690> <BEA-001124> <Created Connection Pool named mds-owsm.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916691> <BEA-001174> <Creating Data Source named mds-owsm, JNDI Name = jdbc/mds/owsm.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916726> <BEA-001512> <Data Source mds-owsm has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916728> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "rtd_datasource">
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916735> <BEA-001177> <Creating Connection Pool named rtd_datasource, URL = jdbc:oracle:thin:@ebspocapp:1521/EBPRD, Properties = user=DEV_BIPLATFORM;oracle.net.CONNECT_TIMEOUT=10000;.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Common> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916736> <BEA-000626> <Free resources in pool "rtd_datasource" will be tested every "300" seconds.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916738> <BEA-001124> <Created Connection Pool named rtd_datasource.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916740> <BEA-001174> <Creating Data Source named rtd_datasource, JNDI Name = SDDS.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <JDBC> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916757> <BEA-001512> <Data Source rtd_datasource has been successfully created.>
####<Jun 24, 2013 12:41:56 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066916922> <BEA-280008> <Opening the persistent file store "BipJmsStore" for recovery: directory=/app1/orabi/Oracle/Middleware/user_projects/domains/bifoundation_domain1/BipJmsStore requestedWritePolicy="Direct-Write" fileLockingEnabled=true driver="wlfileio3".>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Store> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917017> <BEA-280009> <The persistent file store "BipJmsStore" (68f997df-e4a0-4eb1-9497-8d994726f787) has been opened: blockSize=4,096 actualWritePolicy="Direct-Write(read-buffered)" explicitIOEnforced=false records=16.>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917027> <BEA-040321> <JMSServer "BipJmsServer" is resuming.>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917092> <BEA-282003> <The messaging kernel BipJmsServer will use up to 536,870,912 bytes of memory before paging begins>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917115> <BEA-282001> <The messaging kernel BipJmsServer is beginning recovery of its persistent state>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <Messaging> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917158> <BEA-282002> <The messaging kernel BipJmsServer has recovered 0 persistent messages>
####<Jun 24, 2013 12:41:57 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917200> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "BipJmsResource">
####<Jun 24, 2013 12:41:57 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066917408> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Job.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921006> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Burst.Report.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921044> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Email.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921063> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.File.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921078> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.FTP.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921091> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Print.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921107> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.WebDAV.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921125> <BEA-040406> <Distributed destination "BipJmsResource!BIP.Delivery.Fax.Q" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921143> <BEA-040406> <Distributed destination "BipJmsResource!BIP.System.T" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <JMS> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921170> <BEA-040108> <User connection factory "BipJmsResource!BIP.JMS.CF" is started.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <WorkManager> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921185> <BEA-002903> <Creating WorkManager from "weblogic.wsee.mdb.DispatchPolicy" WorkManagerMBean for application "Module-FMWDFW">
####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921232> <BEA-320114> <Initializing the Diagnostics Harvester.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921241> <BEA-320117> <The Harvester is being disabled because there are no Harvestable types configured specified.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <Diagnostics> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921245> <BEA-320119> <The Harvester is now in a inactive state.>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921715> <BEA-160151> <Registered library Extension-Name: UIX, Specification-Version: 11, Implementation-Version: 11.1.1.1.0 (WAR).>
####<Jun 24, 2013 12:42:01 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066921841> <BEA-160151> <Registered library Extension-Name: adf.oracle.businesseditor, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922111> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (EAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922334> <BEA-160151> <Registered library Extension-Name: adf.oracle.domain.webapp, Specification-Version: 1, Implementation-Version: 11.1.1.2.0 (WAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1372066922391> <BEA-160151> <Registered library Extension-Name: bithirdparty, Specification-Version: 11.1.1 (JAR).>
####<Jun 24, 2013 12:42:02 PM AST> <Info> <J2EE> <10.11.34.111> <bi_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <13Hi,
I tried starting the server from the console as well as from command prompt. Here I am giving the command below.
nohup ./startManagedWebLogic.sh bi_server1 t3://machineIP:portNo > bis1_startup.log &
But each time I got the same exception.
Korandla
Maybe you are looking for
-
Compressor 4.1 ! Missing File
Hi all. So I have a project finished in FCPX - I have no errors or missing file messages. When I send it to Compressor, the opening logo and ending logo show up but the entire video between them is not. I am getting the ! Missing File red screen.
-
Unable to decompress large data with CL_ABAP_UNGZIP_BINARY_STREAM
Hello all, i would like to stream the huge amount of XML data to the application server compressed. It seems that the class pair CL_ABAP_GZIP_BINARY_STREAM / CL_ABAP_UNGZIP_BINARY_STREAM should do this job. So far the compression works, because the c
-
Does Flex can use Wamp as server?
I'm new to Flex mobile development and I can't find a way to connect my project with wamp server and confused that flex can retrieve datas from multiple tables from web server. Can anyone help me please
-
I Had an iphone 4s with imessage activated, I switched to an android and now I can't recieve texts from iphones that have imessage turned on. What can i do?
-
HELP - NVIDIA GTX675M (with GDDR5 4GB VRAM) on MSI GT60 0ND
As the tittle said my NVIDIA GTX675M is not working :( eventually my notebook doesn't even recognize the vcard i have already tried everything: wipe out, reset factory mode, actualize to w8.1, downgrade to w7 but still getting no answer :/ off course