WM DATA MIGRATION THROUGH LSMW

Hi
I am Rahul Here.
In a roll out project we want to migrate all the WM data from Server 1 to Server 2.
can someone tell me what all the things are required to be done?
What should be the process?
The process as per my knowledge
1. Download from existing server1 in a format (What that format should be?)
2. Uploade the files to the new system in the same format.
Please comment. Urgent please.
Rahul

Is it just WM that moves, the entire SAP system?
As the material master views will go with the rest of the material master.
So there is no extra/additional work.
In any case, check following link for the datatransfer in WM:
http://help.sap.com/saphelp_40b/helpdata/es/dc/1939516e36d1118b3f0060b03ca329/content.htm

Similar Messages

Sales based data migration through LSMW BAPI (BUS1505) change

Hi Everyone,
keep getting this error message while trying to load sales based scenario.
there is neither no term category in the sales rules's structure nor it is in reporting rule's structure.
error message
Term category 1410 cannot be used in sales rules
Thanks in advance.
Regards,
John

John,
That is hilarious I know that feeling.
Not sure why you are getting this error but try following -
1. Make sure your file does not have data in cells which you don't use.
2. Structures which you do not want to pass any values in, do not pass those structures at all. Means if you wish to change only business partner then user only 1 structure and one header record for identifying the contract that is it. Do not pass any other structure not even blank in the file.
3. Make sure in source to target mapping you have made correct assignment if by mistake you have made incorrect assignment you will get bad data.
4. When you read your data execute step display read data and review where you see 1410.
5. Similarly when you execute Convert step in LSMW execute display converted data and you will see if 1410 was populated.
last step if none of the above works ) Display the conversion program and put a debug point at this particulat field and see from where this value is being passed. This is no standard error so it has to be your LSMW/Input file.
Let me know what it was
Jag

Data migration through IDoc processing in LSMW

Hi all,
I have an requirement wherein i need to transfer material master data through LSMW conversion process into R/3 database.The data is to be posted through ARTMAS04 inbound IDoc.
The problem is to transfer the data simultaneousely through multiple instances of E1BPE1MARAEXTRT segment of ARTMAS04 IDoc.
for example:
I need to have an assignment that should work like this:
E1BPE1MARAEXTRT[]-FIELD1 = '00001'
E1BPE1MARAEXTRT[]-FIELD1 = '76545'
E1BPE1MARAEXTRT[]-FIELD1 = 'SAP'.
Can anybody help me in acheiving this example scenario in LSMW.
Thanks.

HI everybody,
i had solved the problem myself.
Thanks all.

Class data upload through LSMW using BAPI

Hi All,
Plz tell me how to upload class data through LSMW using BAPI.I also need some study material on BAPI.
Bye,
Mithilesh Tiwari

its not possible with single file
for this you need to pass two files of data
1 ) Header data ZSOURCE_LIST_HEADER       Source List Header
     MATNR                          C(018)    Material Number
                                    Selection Parameter for "Import/
     WERKS                          C(004)    Plant
2) item data     ZSOURCE_LIST_ITEM         Source List Item
         MATNR                          C(018)    Material Number
         LIFNR                          C(010)    Vendor Number
         EKORG                          C(004)    Purchasing Organiz
         WERKS                          C(004)    Plant
         VDATU                          C(008)    Valid From
         BDATU                          C(008)    Valid to
for this use below LSMW IDOC method
Message Type         SRCLST                      Source List
Basic Type           SRCLST01                    Source List

RDS for SAP data migration through IDOC's

Dear Experts
Just now we have installed BODS 4.1 and RDS also installed now. I am in the process of exploring the RDS. I found all the migration objects is available in the form of IDOC's. Now my questions are
How to work on custom IDOC's. Do i need to extensively code on R/3 side to upload the custom fields. Like user exit or BADI for custom fileds
If yes then i would say implementation time through RDS will remain more or less same time.
Through BODS or by RDS migration objects is there any way without coding on ABAP R/3 side, Can we achieve migrating custom fields
Please let me how to achieve above requirements by RDS
Thanks
Vijay Mukunthan

Hi Vijay,
You are right, the standard content of the Rapid Data Migration RDS packages brings the content with the standard IDoc interface for SAP standard only. So custom objects are not pre-built with the package. However, we incorporated the foundation to include custom coding as easy as possible:
1) IDoc
We are using the standard interface technology IDoc. IDocs do have an enhancement concept which is described in the online help. There are three main cases and all of them are supported, however two need additional coding:
Z-fields: Additional fields in existing tables lead to IDoc segment extensions
With the IDoc segment versioning concept this is easy to realize without any ABAP coding
Z-tables: Additional IDoc segments will be necessary and lead to a new IDoc version
With the IDoc versioning concept you can easily add Z-segments with leveraging provided user exits
Custom business objects:
You can even create a complete own IDoc message type in Z-namespace for own stuff, leveraging the given ALE layer of the IDoc middleware
2) Enhancement guide
With the RDS package we offer an enhancement guide which helps you to modify the jobs and data flows in the SAP Data Services content according to the changes in the target IDoc structure to reflect additional fields and tables. We built it as a step-by-step guide following for a sample IDoc type but will work similarly for any IDoc.
Best regards,
Frank Densborn.

Data Migrator and lsmw

hi
i want to know where i can find material on data migrator and lsma?
how it works?examples?
thanks
have a nice day

Hi balan,
Check this <a href="http://www.sap-img.com/sap-data-migration.htm">Link</a> for a few tips on the same..
also<a href="http://www.sap-img.com/basis/setting-up-lsmw-on-mini-basis.htm">http://www.sap-img.com/basis/setting-up-lsmw-on-mini-basis.htm</a>
Also check this step by step example..
<a href="http://www.sap-img.com/basis/setting-up-lsmw-on-mini-basis.htm">Doc on LSMW</a>
regards
satesh

MATERIAL MASTER DATA UPLOADING THROUGH LSMW

Hi.
I am new to lsmw.
we have a requirement to upload the material master data through LSMW,.
the data is on Excel sheet on the Desktop of the system.
Can any body help me to upload the Material Master data, procedure in step wise.
Thanks in advance,
regards,
Eswar.M

Hi Venkat,
Go through the following Steps
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
     Subproject Name
     object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
   Maintain Object Attributes
select Standard Batch/Direct Input
   give Object -- 0020
       Method -- 0000
   save & Come Back
2) select radio-Button 2 and execute
   Maintain Source Structures
   select the source structure and got to click on create button
   give source structure name & Description
   save & Come Back
3) select radio-Button 3 and execute
   Maintain Source Fields
   select the source structure and click on create button
   give
   first field
        field name    matnr
        Field Label   material Number
        Field Length 18
        Field Type    C
   Second field
        field name    mbrsh
        Field Label   Industrial Sector
        Field Length 1
        Field Type    C
   Third field
        field name    mtart
        Field Label   material type
        Field Length 4
        Field Type    C
   fourth field
        field name    maktx
        Field Label   material description
        Field Length 40
        Field Type    C
   fifth field
        field name    meins
        Field Label   base unit of measurement
        Field Length 3
        Field Type    C
save & come back
4) select radio-Button 4 and execute
   Maintain Structure Relations
   go to blue lines
      select first blue line and click on create relationship button
      select Second blue line and click on create relationship button
      select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
   Maintain Field Mapping and Conversion Rules
   Select the Tcode and click on Rule button there you will select constant
   and press continue button
   give Transaction Code : MM01 and press Enter
   after that
   1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
   2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
   3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
   4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
   5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
   Maintain Fixed Values, Translations, User-Defined Routines
   Create FIXED VALUE Name & Description as MM01
   Create Translations Name & Description as MM01
   Create User-Defined Routines Name & Description as MM01
   after that delete all the above three just created in the 6th step
   FIXED VALUE --MM01
   Translations --MM01
   User-Defined Routines --MM01
   come back
7) select radio-Button 7 and execute
   Specify Files
   select On the PC (Frontend) -- and click on Create button(f5)
                                  give the path of the file like "c:\material_data.xls"
                                  description : -
                                  separators as select tab radiao- button
   and press enter   save & come back
8) select radio-Button 8 and execute
   Assign Files
   Save & come back
9) select radio-Button 9 and execute
   Read Files
   Execute
   come back
   come back
10) select radio-Button 10 and execute
    Display Imported Data
    Execute and press enter
    come back
    Come back
11) select radio-Button 11 and execute
    Convert Data
    Execute
    come back
    Come back
12) select radio-Button 12 and execute
    Display Converted Data
    Execute & come back
13) select radio-Button 13 and execute
    Start Direct Input Program
   select the Program
   select continue button
go with via physical file
give the lock mode as 'E'
and execute
Regards
Sreeni

Data migration in LSMW with CRM_XIF_PARTNER_SAVE

Hi,
for a data migration of business partners from a legacy system into a CRM 5.0 system I want to use the CRM_XIF_PARTNER_SAVE or CRM_XIF_PARTNER_SAVE_M IDoc. Everything works fine when I migrate a business partner with only one address and only one bank account, but what settings I have to make that I'm able to migrate a business partner with multiple addresses and bank accounts?
I hope you can help me. Thanks in advance,
Timo

Hi Timo,
you need to repeat the corresponding IDoc segements for "Bank Details",
eg for IDoc CRMXIF_PARTNER_SAVE01 (display via WE30 or navigate via BDFG).
here the example for phone data: (I didn't expand all nodes)
CRMXIF_PARTNER_SAVE01    IDoc Structure for Data Type
CRMXIF_PARTNER_SAVE01      IDoc Structure for Data Type CRMXIF_PARTNER_COMPLEX
5 E1010821140028             Complex structure for business partners                 CRMXIF_PARTNER_COMPLEX
4 E1010821140029             Header structure for business partners                  CRMXIF_PARTNER_HEADER
        5 E1010328105722             External Interface: Central Data                        BUS_EI_CENTRAL_DATA
4 E1010328105723             External Interface: Central Business Partner Data       BUS_EI_BUPA_CENTRAL
            4 E1010328105735             External Interface: Roles                               BUS_EI_ROLES
            4 E1010328105737             External Interface: Bank Details                    BUS_EI_BANKDETAIL
            4 E1010328105741             External Interface: Credit Card Details         BUS_EI_CREDITCARD
            4 E1010328105745             External Interface: Industries                         BUS_EI_INDUSTRYSECTOR
            4 E1010328105750             External Interface: Identification Numbers   BUS_EI_IDENTIFICATION
            4 E1010328105755             External Interface: Tax Numbers                   BUS_EI_TAXNUMBER
            5 E1010328105801             External Interface: Communication Types     BUS_EI_COMMUNICATION
5 E1010328105802             External Interface: Communication Data Telephone   BUS_EI_TEL_DATA
5 E1010328105803             External Interface: Data for Telephone       BUS_EI_BUPA_TELEPHONE
4 E1010328105804             External Interface: Data for Creating a Telephone Number     BUS_EI_BUPA_TELEPHONE_CON
                        4 E1010328105807             External Interface: Communications Notes        BUS_EI_COMREM
****start to repeat here your IDoc data, that means insert these segements for each new phone number
                    5 E1010328105803             External Interface: Data for Telephone      BUS_EI_BUPA_TELEPHONE
4 E1010328105804             External Interface: Data for Creating a Telephone Number     BUS_EI_BUPA_TELEPHONE_CON
                        4 E1010328105807             External Interface: Communications Notes      BUS_EI_COMREM
****end insertion
                4 E1010328105811                 External Interface: Communication Data Fax    BUS_EI_FAX_DATA
You can try the same for address data. Note: you don't need to renumebr the repeated segments in the IDoc, the "system" is doing it ...
Be sure that the sequence of the other segements after the duplication is still the same, or you get an error.
Go to transaction WE19. There you key in an existing and successfully posted IDoc. Then you can edit this Idoc, insert the new segements for additional phone numbers for testing.
Rgds
JP
Message was edited by:
        Jörn Peter

Data Migration using LSMW or BDC ?

Hi,
Can anyone provide me with the following information about uploading MM Master Data using LSMW or BDC :-
1. What and all tables are used for uploading Material Master, Vendor Master, Info Record, Open PO, Open PR, RFQ, Open Contracts/Agreements ?
2. What problems are faced during Data Upload ?
3. What error appears/encouontered during upload ?
4. What is the diffrence b/w LSMW and BDC ? Both can be used for Data upload so, what differences are b/w them ?
5. Any other thing to remember/know during Data Upload ?
Thanks,
Lucky

Hi Lucky,
Dont get angry by seeing my response.
See each and every question posted by u is available , in this forum,
u need to do just a search on individual post.
see what ever ur posted, u r definetly got the solutions through others,
remember most of these answers are fetching by this threads itself (60-70%)
a few solutions are there that are given by own,
so better to search first, in the forum , if not satisfied with the solutions then .........
Just its an friendly talk
and Reward points for helpful answers
Thanks
Naveen khan

Error in asset data migration thru LSMW

Hi u all,
i have an issue while running an lsmw for asset data loads here, when i did it in foreground it saves the asset but when i run it in background its erring out
i am doin it thru as91 whichis legacy transfers the error is
Field RALT_DYNP_STRUC-ANBTR02(7) is not an input field AS91 1 SAPLALTD 1100 14 S 00 347
Field RALT_DYNP_STRUC-ANBTR03(7) is not an input field AS91 1 SAPLALTD 1100 14 S 00 347
this ANBTR02(7) n ANBTR03(7) are the *** spl dep fields for TAX and AMT in the takeover values tab,where we were giving the values of spl dep (Bonus value which is taken off in the acquisition yr)
all is goin good in foreground but its giving the error whichi pasted above saying ..is not an input field, when i did it in background not able to figure out...
Any help would be really grateful and appreciated......Thanka a lot in advance.

Hi Nathan,
as i mentioned earlier, it goes smooth when it is done manually or lsmw foreground, and answering to ur ques'n yes the fields are open. i am getting the error when i do it in batch input....
Thanks ya
Jay

Data Upload through LSMW In ME01

I have to upload data into ME01 from single file .
I am using recording method but stuck at the table control handling in it.
How can i handle logic for table control in LSMW.
I have read so mant posts on SDN but no one is clear abt it.
File format:
MATNR      WERKS             VDAT                     BDAT                   EKORG
11                 211                 10.10.2009             10.10.2009          XYZ
11                 211                 11.11.2009             11.11.2009          XXX
Edited by: sanju on Jan 15, 2010 5:34 AM

its not possible with single file
for this you need to pass two files of data
1 ) Header data ZSOURCE_LIST_HEADER       Source List Header
     MATNR                          C(018)    Material Number
                                    Selection Parameter for "Import/
     WERKS                          C(004)    Plant
2) item data     ZSOURCE_LIST_ITEM         Source List Item
         MATNR                          C(018)    Material Number
         LIFNR                          C(010)    Vendor Number
         EKORG                          C(004)    Purchasing Organiz
         WERKS                          C(004)    Plant
         VDATU                          C(008)    Valid From
         BDATU                          C(008)    Valid to
for this use below LSMW IDOC method
Message Type         SRCLST                      Source List
Basic Type           SRCLST01                    Source List

Error in data migration through DTW

Hi All,
      I am creating a template for user define Master data table from DTW, when i am trying to port data by using that template through DTW. it is giving error like--'Master data type User table cannot add row'
So can any one have solution for this.
Regard's
Hari

hi,
object name is U_SCRAPMAST
Code     Name     U_SCD     U_SDSC     U_Status
Code     Name     U_SCD     U_SDSC     U_Status
1          SCR1     SCR1
2          SCR2     SCR2
regard's
Hari

CP issues during data migration through IDOC

HI,
We are migrating data from One server to another thru PFAL, but the CP data is not posted as it gives the error
Relationship starting from 01P 00093159 impossible - 01CP50002607 does not exist/is not active
is there a way to migrate the CP data ?

Hi
Check the BD64 configuration if the relationship is filtered out in the Message type.
Try sending the CP object first to the other server and then resend the person again. The error is because the The object is not existing the Target system.
Hope this helps, if so reward.
Thanks
Shyam

Sales order uploading through LSMW

*Hi All,*
*SAP version Up gradation how to Sales Order data migration through LSMW Batch input Record. Please tell send me any one step by step.*
*Regards,*
*Murali.*

Hi
check the link
[http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc]
Regards
Amitesh Anand

LSMW , how the same is related to data migration,.

HI Experts,
please explain the concept of data migration.
What is LSMW/ how the same is related to migration,
what are the other types of data migrationo other than IDOC & BDOC in sap crm.
IS there any there other tools that helps in data migration,
if so , what are they.
Can a functional guy be able to do the data migration in LSMW.
thanks & regards
Prajith P

Hi Prajith,
I second Venkat, but also you need to know about Data Transfer Workbench in CRM.
Go into the IMG and follow the path: Customer Relationship Management>> CRM
Middleware and Related Components>> Exchanging Data With External
Components>> XIF Adapter Setup>> Inbound Direction>> Settings for the Data
Transfer Workbench and LSMW>> SAP Data Transfer Workbench.
Here's the help from SAP for the Data Transfer Workbench:
http://help.sap.com/saphelp_nw70/helpdata/EN/0d/e211c5543e11d1895d0000e829fbbd/frameset.htm
That should take you where you need to go. Good luck!
Satish

WM DATA MIGRATION THROUGH LSMW

Similar Messages

Maybe you are looking for