WM Inventory Document Cleared with Item not counted

Hi.
I have a strange situation. There is a WM Inventory Document with status Cleared, but there is a Item with status Not Counted.
The differences ware already cleared via LI21/LI20 but due the Not Counted Item, the quant is still blocked by inventory.
Do you have some idea how can I count/clear this item and release the quant?
Thanks in advance.

M7706 is a hard coded error message, you cannot control it via message attributes.
What you can do is to do a re-count via transaction MI11 with reference to this inventory document. In this case you will be able to add new items, however, you have to enter the counted amounts for the existing items again.
But in my opoinion it's easier to create a new PID as suggested by Jurgen.

Similar Messages

  • MI02 : new items for a document with item already counted

    Dear.
    I try to insert new items for an inventory document.
    This document have items already counted.
    The system send this error message M7706 : Items already counted (no new items possible).
    Do you know a solution to avoid this error message ?
    Thanks.

    M7706 is a hard coded error message, you cannot control it via message attributes.
    What you can do is to do a re-count via transaction MI11 with reference to this inventory document. In this case you will be able to add new items, however, you have to enter the counted amounts for the existing items again.
    But in my opoinion it's easier to create a new PID as suggested by Jurgen.

  • F.13 Customer Document Clearing with Tolerances

    Hi Guys,
    We are facing an issue with F.13 for clearing the Customer documents.
    We have debit of 150,24 and a credit of 150,23 so there is 1 cent difference. For this, we are clicking on the " Include Tolerances " button.
    We defined tolerances for the Recon accoung and assigned it in FS00. We have the user tolerance assigned, the customer tolerance assigned to the company code , the gl tolerance maintained, the customer tolerance maintined in the customer master record and the tolerance amount is more than 1 cent .
    Still the program says , clearing not possible, difference too large for clearing. I searched for few SAP notes, but nothing seems relevant. Any other possible points.
    Thanks for your suggestions.
    Srikanth.

    Hi,
    could you please check the amounts in each currency in the documents. For example transaction currency, local currency, second local currency. Maybe the larger difference is coming from the other currency type.
    I hope this helps.
    Best regards,
    Renata

  • PO-Freight cost (header, diff currency with items) not distributed when GR

    Dear Gurus,
    I've one PO with freight cost at header level (1000 VND). In the PO, this freight amount shown to be distributed successfully to line item (value base, line item 1 is 300 VND, line item 2 is 700 VND). But when doing GR, the freight cost of each line item is NOT distributed but equals the total freight amount (line item 1 is 1000 VND, line item 2 is 1000 VND).
    In this PO, vendor is international vendor, goods in USD. Freight cost is in local currency (VND)
    The configuration for this freight cost condition is at Header level, Group Condition ticked; Calculation type: Fixed Amount; Scale Basis: Value. When the currency of freight cost and goods are the same (all in USD), I have no error as above.
    Please help to solve this issue.
    Thanks.

    Hi
    I am facing the same problem in my client. It would be great if you can share how you resolved the issue of Freight Cost
    Regards
    Athar

  • Document update with DocumentDefinition not working

    Hi
    I would like to be able to update a PublicObject with new attributes and also reset the class name to which the object belongs.
    I have written a small test program (see below) which compiles fine and, according to the APIs should work updating a PublicObject.
    (Note that I haven't included the lines where I create a LibraryService and librarySession, but I am doing all that in an earlier part of the code. As input parameters (apart from username and pasword to start the session) I am supplying a path and filename for an existing document in IFS for which I want to do the update.)
    Here is the code (note everything below is between try {  } catch { } statements but this is not shown here):
    // First I set the Folder Object to the location the PublicObject resides in, then cast a Document Object from the existing file, where m_session is my librarysession.
    FolderPathResolver fpr = new FolderPathResolver(m_session);
    fpr.setRelativePath(destinationpath);
    Folder f = fpr.getCurrentDirectory();
    Document currentDoc = (Document) f.findPublicObjectByPath(filename);
    // Now I am creating a DocumentDefinition, set the class and an attribute and try to update the document with these new values. The class METADATA exists and is a subclass of DOCUMENT.
    String description = "This is a new description";
    DocumentDefinition newDocDef = new DocumentDefinition(m_session);
    newDocDef.setClassname("METADATA");
    newDocDef.setAttribute("DESCRIPTION",AttributeValue.newAttributeValue(description));
    currentDoc.update(newDocDef);
    When I run this, nothing happens, i.e. the file in question retains its old class association and the description is not changed.
    It would be greatly appreciated if someone could help and point out what is wrong with my code as having the ability to update documents is central to what we want to do.
    Thanks very much.
    Hugo

    I had the same problem and solved it by doing this 2 stepa:
    1. Run report CRMOST_CREATE_PACKAGE, because after upgrade, package $WS_BOL_GEN is missing.
    2. Run report CRMOST_GENERATION to generate webservice again.
    Regards.

  • Document templates with reference not working anymore with CRM2007 on SP7

    Since we upgraded our CRM system(v 2007) to SP7 we are facing a serious problem with our document templates. The document templates do not contain any reference anymore (e.g. BP name and address details). This issue is a showstopper for the SP upgrade to go live in production.
    We have taken the following actions to get it work again but all without any success:
    - We have regenerated the webservice again (CRMOST_GENERATION);
    - Created the webservice again and generate it (CRMOST_GENERATION);
    - Run CRMOST_GENSTATUS_MONITOR for correponding webservice: status OK
        -> when debugging /CRMOST/Z_D007_READ I see in table LT_MESSAGES: "Invalid mainobject: GDCOIRoot
    Also, we investigated SAP note: 1329961 and notes related to CRM-BF-COM in SAPKU70007.
    It looks like a bug in the new programming. When using standard SAP mainobject GDCOI no reference is taking into account anymore.
    To visualize the issue for you, I will describe for you the steps how we can reproduce the issue:
    - Within Account ID we identify an account and confirm account;
    - Now when we create a service ticket we can enter some additional information in fields;
    - We save the ticket and select the "Create a new letter" icon and select a document template;
    - Now Word with XML is openened but WITHOUT taking any reference from confirmed account and service ticket.
    I can not imagine we are the only customer with CRM2007 on SP7 and is using document templates who is facing this issue.
    I really would appreciate it if anyone could help us in any way.
    Regards,
    Harrië

    I had the same problem and solved it by doing this 2 stepa:
    1. Run report CRMOST_CREATE_PACKAGE, because after upgrade, package $WS_BOL_GEN is missing.
    2. Run report CRMOST_GENERATION to generate webservice again.
    Regards.

  • Document contains no items - Carry Out Sourcing From External Requirements

    Hello Experts,
    I have a problem in carrying-out sourcing in SRM 701 with external requirements come from ECC 6.0
    I want to process the requirements into purchase order, everything is OK because I see the line item of requirement is there. But when I check the document, this error occurs
    Back-End Error:Document contains no items
    Back-End Error:Please enter items first
    It seems SRM didn't bring the item displayed to the back-end so it keeps sending error message.
    How could that happen when I can see the document clearly contains item?
    Appreciate all the answers
    Regards,
    Ted

    Hi Dinesh / Pradeep
    Could you get a fix to this issue, we are facing the same error after we have successfully distributed the SRM Central Contract to ECC and then trying to fullfil the MRP generated PR that we used for sourcing
    We are in the classic scenario and in the classic scenario, we cannot create a Purchase ORder in ECC from SRM, it only creates local SRM PO
    Hence we are doing the following process steps for PDP with PM scenario
    1) MRP Run
    2) Push the PR as a Shopping Cart to SRM
    3) Select the Shopping Cart and create RFx
    4) Publish the RFx and Award the Vendor with the SRM Central Contract
    5) Distribute the SRM Central Contract to a ECC contract
    6) Use ME57 to turn the MRP PR to a ECC PO by assigning the Distributed backend contract as a source of supply in ECC
    We are failing step 6
    Your answer was below, but it did not end in a resolutuoin
    Please let me know the resolution to this step
    Regards
    Tridip
    Your earlier unfinished answer
    " How could we disable the error message so that we could create PO in ECC with reference to contract and purchase req. "
    - this message is due to standard config we do in ECC for matl grp & pur grp for PR transfer in table T160EX
    ECC books the combo of matl grp & pgrp for external system (SRM) and will not allow to process the PR in it.
    a procurement profile is allotted in EBAN.
    Don't think you can change the message type to Warning or info.

  • Creating Physical Inventory Documents using batch job in WM

    We use transaction LX26 to create the physical inventory documents for the storage bins and the materials therein. and the new PI dates are proposed based on the cycle count indicators configured.
    We want to automate the creation of physical inventory documents using a batch job. How can we achieve this?
    I understand that the program RM07ICN1 generates PI documents only when materials are managed at IM levels and this does not work for WM. Is there any other standard program which can be set up in batch to create the PI documents for the materials at WM level? If there is something then please let me know details....
    Thanks,

    I entered following details,
    WH no.
    Storage Type
    Inventory in Period (One year date range)
    Inventory Count date (Today's date)
    The output in spool shows me the following,
    No of Records Passed ;Quant Information; InventoryProposal; Later / block; Bin Information; Empty bins; Inventory active
    The list of storage bin, material, description & inventory date is also displayed.
    Description has Scheudled and Overdue and the inventory date is some dates in next months.
    It doesnt show anywhere that inventory document is generated.Please note that I had not selected the Activate Inventory List check box because I just want the system to auto create the inventory documents based on the logic of cycle count indicators.

  • Items not appearing on desktop

    I am having problems with items not showing up on the desktop.
    The main problem I am having is that I have a Moto Q Cell phone, which I use Missing Sync software with. It was mounting on the desktop and then stopped. Everything else works with it on my Mac. To make a long story short, I have written the company, they have looked at the logs and everything appears fine. So I am at a loss.
    Then I started thinking about how I will download a program or file to the desktop and it does not appear. However, if I do a search, it shows it is there. The only way it will appear is for me, is to search for the file, then drag it onto the desktop from the search results.
    So, my thought is it isn't the phone or the software, but a bug in the OS. Thinking back to pre OS X days, I used to rebuild the desktop. Is this still something that is available in OS X? It has been so long since I had to do that, I have forgotten how.
    Any other ideas on what I might do to make sure things are appearing correctly on the desktop?
    Thanks in advance.
    Randy

    Adrian Clarke1 wrote:
    Hi Randy, This sounds like two separate issues. For the cell phone to mount check in Finder preferences under the General Tab and select the items that you want to appear. Presumably the cell phone would be seen as a disk(?)
    It should be seen as a disk, you are correct. However all three items are checked in the Finder preferences. I already checked that.
    For downloaded files, that is a browser specific thing. If using Safari, open Safari Preferences, select the General Tab and against "Save Downloaded Files to..." choose Desktop. For other browsers there will be a similar setting in its Preferences.
    Good luck,
    Adrian
    That isn't the problem. They ARE already set download to the desktop and are doing so. They are just not always appearing on the desktop as they should when downloaded. In other words. I should see them there after I have downloaded. But as I stated in my earlier post, the only way I can make them visible on my desktop is by searching for them, and dragging the found file (which IS LISTED as being on the desktop) onto my desktop again and then it appears.
    Good try, but neither of these were solutions.
    Message was edited by: Randy Traylor
    Message was edited by: RT

  • Error while creating physical inventory document with zero count

    Hi,
    I am trying to create a physical inventory document for a material that has zero stock and that is not batch managed but I am geting an error as below.
    "Item 001: No batches that can be included in phys. inv. exist.(Message no. M7701)"
    This error occurs only for one or two materials.
    I am able to create the physical inventory document for other materials which is also zero stock and there is no batch managed for the same.
    Can anyone pls advice.
    Regards,
    Ramya

    hi
    if your material is split valuated, but not batch managed, then the split valuation type is shown in field batch number. And...it is a batch then.
    To be able to do a zero count you have to have a batch record whose batch number is the valuation type.
    If you never had stock in the storage location you want count, then you have to
    1. extend the material to this storage location with MMSC
    2. create the batch record with MSC1N for this storage location.

  • Inventory in transit open item account not cleared

    Hi
    Inventory in transit open item managed account not cleared with green light.
    But i can see clearing document number and date inFBL3N.what could be the reason?
    Thanks
    cris

    Dear,
    Please check in FBL3N, the open date should be greater than or equal to clearing date, if it is less than then it will show as Open i.e. in Red Color.
    Br,Vivek

  • Document type KR is not picking to Clear GL account with T-code F-03

    Hi all,
    My client wants to clear GL account Cash-in-Transit which is open item managed. He has posted two items. One is with KR document type like Intercompnay adjustment account debit (40) and Cash-in-Transit account credit (50). Second item is with SA document type like Cash-in-Transit accont debit (40) and Intercompany adjustment account credit (50). He did not give vendor number and appropriate posting key (31) while postings. With document type KR, he posted with posting keys 40 and 50. Now while clearing the GL account through T-code F-03, system is picking only SA document type. The system is not picking document type KR. He wants to clear the items with each other. I have checked the document type settings. Check boxes Intercompany postings and trading partner are active in both above document types.
    How can the GL account be cleared ? Are any configuration settings missing ? Kindly advice as soon as possible.
    Thanks in advance.
    Regards,
    K.S.K

    Hi,
    First of all..why would system need a Exchange gain/Loss Account..If your local currency is INR and you posted a debit and a credit document both in INR..then there is no question of a foreign exchange gain/loss account..
    BUT, if you have posted the document in any currency other than INR, ie: your local currency...then the system would need a exchnage gain/loss account when you try to clear the debits and credits.. i am giving an example below to explain better..
    You posted a debit of 100 USD @ 40 = Rs. 4000.00
    You posted a Credit of 100 USD @ 42 = Rs. 4200.00
    Now, if you clear this debit and credit then there is no difference in 100 USD, as the debit and credit is netting off.. but if you see INR there is a difference of Rs. 200.00 which system posts to Exchange gain/loss account..which we maintain in OB09.
    Hope it is clear to you now..
    Regards,
    SAPFICO.

  • The Create List Item workflow action does not work in document library with document template

    My end goal is more complex but below is a basic example of the issue I’m having that just simply does not work.
    I'm trying to use a site workflow to create an item in a document library that has a document template applied to it but the file that gets created by the workflow is corrupt and cannot be opened.
    I created a document library and edited the document template by adding some text to the header and changing it to a Word docx file instead of a Word dotx file. I tested the document template by clicking the files tab in the ribbon and then clicking new
    document which opens the document template in Word and allows me to edit and save the document back to SharePoint. Then I created a SharePoint 2013 site workflow in SharePoint Designer that contains a single Create List Item action, and that action creates
    an item in the document library with the name field statically defined. I published the workflow and then manually start it on the site. The workflow completes successfully and when I navigate to the document library the document has been created by the workflow.
    When I click on the document to open it in the Word Web App it throws the error pictured below and if I open it in the Word client application it just opens a blank document and not the correct document template.
    I also tried using a SharePoint 2010 workflow with pretty much the same results. Opening the document in Word Web App gives the same error as above and opening the document in the Word client application gives the error pictured below.
    Come on Microsoft creating a Word Document in a SharePoint Document Library from a SharePoint Workflow should just work! Is this a bug or does anyone have any ideas on what is causing the this issue?

    I had the same problem with corrupted document - this worked for me:
    1. Create a 2010 Workflow which creates the list element in a document library
    (you may start this workflow from your 2013 workflow if applicable)
    2. In the Create New List Item properties - make sure to set ContentTypeId to your content type
    ("Id for indholdstype" is Danish for "Contenttype ID")
    3. Your Content Type template should be a ".docx" file - NOT a ".dotx" file...!
    (I have always created my templates for content types as .dotx files - seems Microsoft wants us to use ordinary .docx files as template files for content types)
    Hope this helps you!

  • Complaint with reference to R/3 Billing Document , Items not getting copied

    Hi,
    I  have implemented BADI CRM_COPY_BADI_EXTERN for pulling billing documnets which is working fine. But when I am creating a credit with refernece to billing doc fetched all other details are getting populated except Product, description into line item level.
    I am using MAPPING_FOR_EXTERNAL_DOC for mapping R/3 values to Web UI fields. However CT_ORDERADM_I table in this method does not getting filled up with item level data as product , description etc.
    I am populating the same and modifying the table in program. However it is not populating the value in Web UI fields.
    Can anyone help as how should I populate item level values?
    Thanks,
    Madhura

    Hi All,
    I have a requirement to display the item details of complaint are created with reference of a billing document in Web UI.
    When a Returns Split is created with reference to a billing document, the item is split into multiple items based on the quantity in the source document. The BAdI definition CRM_COPY_BADI_EXTERN which we implemented for this requirement. This works fine in SAP GUI but i need to replicate the same in Web UI.
    I have implemented the BAdI definition CRM_COPY_BADI_EXTERN in read_data method, check_split_change_alv method is actually spliting the line items based on the quantity. In SAP GUI its works fine but it’s not working in web UI.
    We used a FM CRM_INTLAY_GET_HEADER_GUID to retrieve the header guid when there is call from web UI. But this FM returns zero value for guid. I’m struck up at this point.
    Please suggest how can i replicate the return split in webui too.
    Thanks,
    Deepak

  • Not able to enter the count for physical inventory document in WM

    Hi All,
    I have created a Physical Inventory document using LX16 t-code (WM managed). Since the material and bin stock is zero and When I try to enter the count by ticking zero stock indicator using LI11 t-code, I am not able to save the document and system throws error "Finding empty Quants provided for" and message number is L4058.
    Please let me know how to resolve this.
    Regards
    Krishnamurthy

    Yes your understanding is correct but only thing I have not entered qty in the count field rather I set only zero stock indicator.
    My requirement is " In Inventory (MMBE) stock of a material shows around "3000" qty. But In WM stock is "zero" and physically also "zero". so in IM also stock should be reduced to "Zero". So I tried of creating PI document in WM and then when I try to enter the count, I faced the menioned problem.
    Regards
    Krishnamurthy

Maybe you are looking for