WM stock not acting as it should

Hello, I hope you are all doing well
I have a challenge that is proving very difficult to find the root cause. My WM stock situation is not acting as it should
My current theory is that one of the t.o. update tables must be failing to update so the system does not see the existing transfer orders for some time.
Actually 3 issues related to the same errors in my opinion;
1. system is allowing stock removal of inv. already promised on open t.o. (when we do not allow negative stock per config)
2. system is sending picks to bins without enough stock
3. locking quant's in 110 that require SAP intervention to clear, the quant's are locked due to discrepancies in the t.o. update tables. (LQUA and LQUAB)
I think these are all from the same root cause but I could be wrong.
What could the root cause be?
Where should I look to prove or disprove my thoery about the t.o updates to WM causing this?
If I could find a t.o. that shows updated in both the header and line items but do not update to WM until some time later I could prove my thoery...
Is there another table that must update before the t.o. will show in t.o. searches (a table other then the header/line item tables)?
ANy thoughts, ideas would be appreciated since I am stuck with no answer

Jürgen L. wrote:
> If SAP would fail with the update, then the user usually gets an express message and you can see the update failure in SM13 and can analyze why it failed posting.
>
> Check the definition of your storage type whether you lock for picking at storage bin, or only at quant, or not at all.
> This could at least be one reason why you can have TOs in parallel.
>
> That SAP proposes picks from bins without enough quantity might have to do with wrong information in summary table LQUAB.
> which is in turn caused by wrong capacity check method, or earlier changes to capacity check method while you had stock in the storage type
Hello, Thanks for responding
I think the user for the actual update would be the batch job? (since the t.o. are created /confirmed OK from user perspective, just the system update that has failed)
Unfortunitly I am not having authorization for SM13 in production systems and we do not see the error in development systems.
I don't understand "whether you lock for picking at storage bin, or only at quant, or not at all" I see no option in storage type definitions to select or de-select locking. Also note there have been no changes to our storage type definition details that I know of and the problem is new (years since go live.)
The locking issue we see from table descrepencies are on the quant level if that's what you were refering to.
I cannot see any selection for capacity check method (nothing it selected or checked)
Any ideas?
Edit: I think it is safe to say that the locking quant issue we are seeing where LQUA and LQUAB tables do not match show proof that the update may take a long time or fail. I think it is clear that is the cause of the other two issues.
How do I prove it to my seniors?
Edited by: Arakish on Sep 14, 2010 12:14 AM

Similar Messages

I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?

I purchased a program on Mac App store and the program does not act as it should, also was required to pay up front whereas had I went to the web site, ibank 4 I would have had 30 days free trial an would have found that the program does not work.?

Free trials are not available through the Mac App Store.
Apple is not here. Apple does not answer questions here. This is a user to user support forum. There are only folks here who use Apple products.

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

I can't synchronyze my contacts with my Iphone after the last update and I lost all my contact I can't find them I suppose they are stocked in my ICloud but I am not sure what I should do ????

Hi jandroantonio,
Welcome to Apple Support Communities.
It sounds like your iPhone update may not have completed succesfully. Not to worry, we have an article with information on how to treat this symptom:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy

Confirmation of production order - stock not updated

Dear all
On confirmation of production order,all dependent requirements as per bom (stock available at storage locations) should get updated ( as I set back flushing for all material stocks at material master level). But, when i do mb31, final product stock is updated, and bom stocks not getting updated.
what is the reason.please give solution

Hi GB,
Please analysise the following :
1.COGI what is exact error u are getting.
2.Did u check the following options
1. In the routing, the backflush indicator is set in the component assignment.
2. In the material master record, the backflush indicator has the characteristic "Always backflush".
3. In the material master record, the backflush indicator has the characteristic "Work center decides", the indicator being set in the work center.
Use
3.MB31 is for GR of stock means it post the stock at FG storage loactication ok.
4.If u need to update in BOM stock , u have to do it by MB1C/MB1A with movement type 262.
5.Check the stock in MMBE whether u have maintained ornot.
Please check all those anf come back.
Regards
Jia

After EHP6 upgrade in SAP ECC6.0 Stocke not get updated in MMBE after Partial UD

Hello Experts,
Recently we have upgraded our system to EHP6 on ECC 6.0 facing issue in MMBE. We have given Partial UD. after partial UD, some stock suppose to move in Blocked stock as per UD code customization. surprisingly stock not moved to Blocked stock. same is updating through Mb1b transaction.
Thanks in Advance !

Hi,
Check what have you maintained in QM inventory posting in Configuration.
Follow the path: QCC0> Quality Inspection> Inspection lot completion> Define inventory posting.
Movement type 350 should be maintained against VMENGE04 in Q Stock.
ntn

Been acting up what should i do

once i downloaded ios 6 for my ipod touch 4g the appd have been acting up what should i do

What is "appd"?
Try the standard fixes:
Try the following:
- A reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod.
It also seems that some apps are not compatible with iOS 6 and you will have to wait for the developer to update those apps.

I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

I spill all my coffee on my new MacBook Air, its not working anymore, what should i do ? I have to buy a new one coz its pricy to fix it.

Liquid spills, why your MacBook chassis is a one-way valve for spills
After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.

HT5654 Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

Not sure if i should get one

I want a macbook,i really do. But its getting closer and closer to the time that im planning on buying one, and im not sure if i should get one yet. Im a sophmore in highschool, and i need a computer for highschool. I know im going to end up getting some bias answers but--Should i get a macbook now, or should i get some other computer? The computer that im going to get is going to have to last from now till--hopefully--the end of collage. So is there another computer that i should get, and get a mac sometime in the future? maybe even before collage and just have some cheap thing for highschool. I just want your opinions, im not trying to starts some kind of mac v. not mac arguement. I just didnt know where a good place to ask would be so i decided to ask here. Thanks Alot.

I used both Mac and PCs during college.
As a recent graduate, it was very important that I paid attention to my major and class requirements. Several classes I had required Internet Explorer, MS Project, and Visio.
At the time the best choice for me was a PC. However, as a owner of a MacBook, I now dual boot and have the best of both worlds. However, dual booting does require a Windows XP Pro "SP2" disc.
*Getting Windows XP*
Around college you should not have a problem getting this. A single XP license actually allows you to install the OS on (1) PC and (1) Notebook. Finding another copy shouldn't be that difficult. And if worse comes to worse, you just call Microsoft (some place in India) and activate the copy over the phone. Just tell them the copy is on one PC to make it a quick phone call, they can't understand much more let alone any explanation of the license and if it was uninstalled off another computer.
*Word Processor*
I use Word 2004 for Mac. It functions well, but I feel Word 2003 is still better.
*School Software*
I would also check with your school and see what software you get with your tuition. Some schools just give out AntiVirus crap, others provide entire Office Suites. So if you are going for broke, keeping software cost in your plan is a good idea.
*Final Opinion*
If it were me, I would go with the MacBook. Because I know how to hunt for software, I don't figure it paying for any. The MacBook is actually a very competitive price. Since Apple provides the option to run Windows, why not get a MacBook to take advantage of both OS X and Windows environments.

Creative cloud photoshop blur tool not work as it should be

creative cloud photoshop blur tool not work as it should be !
I go to blur a painting i am doing and it does not blur enough and I am using wacom Intuos 5 med pen tablet.
and I even set the tablets sensitivty for pressure lower then default and still not getting the blur tool to do its job.
I even adjusted the brush settings too to be able to blur even more on hard settings, still nothing.
at least it not bluring enough to see any major changes.
the only way i can blur anything is by using the fliters blur or the brushes ( mixer brush ) settings to mix colors and do it that way.
(note) I will not post my systems specs sorry I don't do that and even the tech from adobe said I do not have to. and so I wont !
just need advise not to share system specs.
and thats what this forums board is for getting advice and read what others say about the issue at hand.
it's not to post or share system specs !!!
so with that out of the way I need advice only please ?

Hi,
It might be your image is too big in terms of pixel dimensions for the blur tool to work well.
If you zoom to 100% do you see any change when using the blur tool?
What are the pixel dimensions of the image?
(Image>Image Size)
If you try a small image, does the blur tool work?
What about when you use the mouse instead of your tablet?
Can you at least tell us what operating system and version of photoshop your using?

HT1414 My daughter has an ipod touch 1/2nd generation not sure but it's older, and we can't open it because it says "IPod is disabled connect to iTunes" but it won't connect to my Imac either not sure what I should do?

I've rebooting it several times and it still says it's locked. Not sure what I should do she's young so I don't want really want to have to buy her a new one. Thank you for your help.

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps..

My passbook on my iphone 5 works the same as it did for the iphone 4, its not working like it should. why?

my pass book on my iphone 5 does not work like it should, it works just the same as it did on the iphone 4, i tryed the date an time trick like 5 times an still nothing. i tryed factory reset an nothing. i know it workds different on the iphone 5 then the 4. but i dont know what else to do.

Can you be more specific about what isn't working? Are you running iOS 6 or iOS 6.1?
Did you read the support page on Passbook? http://support.apple.com/kb/HT5483

Siri is not working like it should i ask it to play songs and it just says sorry i cant do that any ideas y

siri is not working like it should i asked it to play songs and it just says sorry i cant do it any ideas y

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

RegExp not working like it should

Maybe I just need another pair of eyes looking at this, but I have a RegExp instance that should work according to multiple tools on the web but it's not matching when it should in my application. The expression should match if there isn't any leading or trailing spaces. Here's a code snippet:
var regexp:RegExp = new RegExp("^\S.*\S$|^\S(?!.)", "s");
if(regexp.exec("Hello World") == null)
trace("NO MATCH");
Using tools such as Grant Skinners RegExr (http://gskinner.com/RegExr/) it appears that the previous code should get a match. Does anyone see an issue or know why it isn't working?

Hi All,
while assigning value to a RegEx in constructor itself, we can either specify pattern (for which we need not escape already escaped character)
like
var regexp:RegExp = new RegExp(/^\S.*\S$|^\S(?!.)/s)
or we can specify a string (for which we need to escape already escaped characters)
like
var regexp:RegExp = new RegExp("^\\S.*\\S$|^\S(?!.)","s")
Regards,
Abihshek Chaudhary

I tries to backed up and storage on iCloud but its just shows down below "Estimating time remaining" but theres no time remaining !!! And i connect to the Wifi already and i buy a storage capacity !!! But its not backing so what should i do in that case !

I tries to backed up and storage on iCloud but its just shows down below "Estimating time remaining" but theres no time remaining !!! And i connect to the Wifi already and i buy a storage capacity !!! But its not backing so what should i do in that case !!!?

Welcome to the Apple Community.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.

WM stock not acting as it should

Similar Messages

Maybe you are looking for