.wmv mit Adobe Encoder Cs6?

Guten Tag, ich wollte mal nachfragen ob mir vielleicht jemand helfen könnte mit Adobe Encoder Cs6.
Ich habe bereits mit Cs5.5 gearbeitet, überhaupt kein Problem. Konnte meine Projekte in Adobe Premiere Pro Cs5.5 bearbeiten, in die Warteschlange (Encoder) schieben, und in .wmv rendern.
Seit Cs6 finde ich die einstellung für .wmv nicht mehr, gibts die nicht mehr?
Hab nur .f4v, .flv, mp4 und mp3 und ein paar andere Formate zur verfügung.
Bitte um Hilfe, danke.
Greez
- Tobias

Ich denke mal das hier sollte helfen http://puu.sh/145a8
Also nochmals zur erklärung.
Ich starte Adobe Premiere Pro Cs6, bearbeite meine Videos, exportiere sie; dort direkt .wmv zu rendern ist kein Problem
- Wenn ich jetzt aber nicht direkt exporiere sondern in die Warteschlange schiebe => Adobe Encoder Cs6 habe ich kein .wmv mehr zur auswahl. (siehe screenshot)
Wo liegt das Problem? Oder bin ich einfach blind? :s
Naja danke für die Hilfe
Cheers.

Similar Messages

Adobe Encoder CS6 stopped working, not start.

Hello,
I have a PC with the following characteristics:
Motherboard: Intel DX58SO
CPU: Intel i7 2.97GHz
RAM: 8 Gb
Hard Disks: 2 in RAID (7200RPM)
The problem is:
Adobe Encoder CS6 stopped working, not start, what can I do?
No works wanting to export from Premiere CS6 or opening it alone.
Thanks

Good luck with that, and don't forget to deactivate CS6.
My system is slowing down after nearly two years, and I am dreading a reinstall - there always seems to be something you have forgotten! What really worries me is what happens to existing raid0 arrays seeing as the mainboard needs drivers. They are backed up, but I just don't trust a single level backup, and will have to add a further 3Tb of drive space to make a straight copy of the raid0 arrays. I also like the idea of Windows 8.1, but dread finding out that the drivers don't work!
The Premiere Pro hardware forum is the perfect place to ask about stuff like that. Harm, Bill, Erik etc. are super clued up on such things, so I shall run my concerns past them before committing.
So I wish you good luck again, and I know you'll make a plan before going ahead with it.

Film in mpeg exportieren mit Adobe Premiere CS6

Ich habe einen Film mit Adobe Premiere CS6 neu vertont. D.h. der Film hat als Tonspur englisch gehabt und habe in die deutsche Tonspur ersetzt. Im Programm Permiere ist der Ton ziemlich synchron.
Wenn ich den Film aber exportiere, habe ich schon alle möglichen Formate versucht (flv, avi, mpeg2, mpeg4 und wma).
Bei mpeg2 habe ich überhaupt nur den Ton als Ergebnis bekommen, obwohl ich Ton und Audio ausgewählt habe. Bei mpeg4 war die Qualität sehr schlecht. Bei avi war die Qualität sehr gut nur sehr groß das Ergebnis und der Ton ziemlich versetzt. Am besten war es bei wma.
Hoffe da kann mir jemand weiterhelfen, wie ich dies am besten exportieren kann.
Danke für jede Antwort

Danke für die Antwort.
Er versuche nun was ich bis jetzt weiß hier weiterzugeben. Leider habe ich mit Videobearbeitung kaum Erfahrung.
Ich hab ein avi Video
Video:
Format (700x460)
Datenrate: 1800kbit/s
Einzelbildrate: 25 Einzelbilder/Sekunde
Audio:
Bitrate: 128kbit/s
Kanäle: 2 (Stereo)
Abtastrate: 44khz
die deutsche mp3 Tondatei
Bitrate: 128kbit/s
Info von Eingenschaften / Details der avi Datei.
Ich habe beide Dateien in Premiere importiert.
Das Video habe ich auf Video1 gelegt, daher habe ich auch den Originalton auf Audio1 bekommen.
Den deutschen Ton habe ich auf Audio2 gelegt.
Die Audio1 Spur habe ich vorne das Audiosymbol deaktiviert. Somit verwende ich nur den deutsche Ton.
Ich habe inzwischen mit ein wenig Spielen das Video etwas versetzt. Somit passt nun beim Exportieren der Ton mit dem Video zusammen.
Wo ich aber noch immer das Problem habe, ist beim Exportieren des gesamten Filmes eine vernünftige Dateigröße zu erhalten z.B. in avi oder mpeg.
Wenn ich nämlich in avi exportiere und die Standardeinstellungen belasse erhalte ich eine 4GB Große Datei. Meine Ursprungsdatei (avi) hat aber nur 1,5GB.
Die Filmlänge beträgt 1 Stunde und 30minuten.
Bei den Informationen in Premiere habe ich folgendes stehen:
Video: 25fps, 700x460
Audio: 44100hz - 16bit - Stereo
Welche Einstellung soll bzw. kann ich beim Exportieren wählen.
Hoffe da kann mir jemand weiterhelfen, bzw. einen Tip geben oder mir mitteilen, welche Informationen noch fehlen, damit man mir helfen kann.
Vielen Dank

Adobe Encoder CS6 fails to encode following computer restart/shut down

To make a long story short, I want to be able to queue up videos using an external hard drive as the video source then be able to shut down my computer, start it up at a later time, and then encode the videos.
I was able to successfuly do this using Adobe Premiere/Encoder CC, but with CS6 the ecoding fails if my computer has been shut down or restarted before I begin the encoding.
Thanks, Adam

MIght try posting here.
https://discussions.apple.com/community/mac_os/mac_os_x_technologies?view=discus sions

Stichwortsuche mit Adobe Bridge

Ich arbeite mit Adobe Photoshop CS6 und dem zugehörigem Bildverwaltungstool Adobe Bridge.
Meine Bilder habe ich in Bridge mit diversen Stichwörtern versehen und kann (in Bridge) über BEARBEITEN - SUCHEN Bilder (einzelne oder mehrere) mit speziellen Stichwörtern finden.
Das hat bisher einwandfrei funktioniert. Seit dem update auf die neueste Version geht das nicht mehr:
Egal, welche Stichwörter ich eingebe, egal in welchen Verzeichnissen ich suche, das Ergebnis ist immer dasselbe: Es erscheint die Meldung „Keine anzuzeigenden Elemente“ und das Fenster bleibt leer.
Such ich die Bilder „manuell“ auf, also durch Blättern in den Verzeichnissen, so sind die Dateien ebenso vorhanden, wie die Stichwörter.
Gibt es einen Grund für dieses Verhalten?
Ich bedanke mich für Tipps und Hilfestellungen im Voraus.

Ich habe dieses Problem heute auch gehabt. Alle meine Smart-Sammlungen lieferten plötzlich bei der Stichwortsuche keine Ergebnisse. Ich habe das nach einigen Versuchen doch endlich behoben. Bisher waren meine Kriterien in der Art 'Stichwörter enthält xxx'. Ich habe das in 'Stichwörter ist gleich xxx' geändert und alles war wieder in Ordnung. Das ist natürlich absolut unverständlich, denn wenn die Stichwörter z.B. gleich 'X' sind, dann können sie nicht 'Y' und auch nicht 'X' und 'Y' sein. Die richtige Suche müsste heißen: Stichwörter enthält 'X', Stichwörter enthält Y. Je nachdem wie man die Übereinstimmung auf 'ein' oder 'alle' Kriterien eingrenzt, bekommt man die Vereinigungs- oder Schnittmenge. Streng genommen ist 'ein' Kriterium dabei falsch. Richtig müsste es heißen 'wenigstens ein' Kriterium, sonst würde ich wirklich nur Ergebnisse mit einem einzigen passenden Stichwort und nicht mit zwei oder mehr.
Das nennt sich boolesche Algebra und Mengenlehre. Die gehören zum Basiswissen für Softwareentwickler. Ich bin selbst einer und bin nun, nachdem der Ärger verraucht ist - der war nicht unerheblich - hämisch amüsiert. Man kann Programmierer eben nicht dumm genug einschätzen und manche Dinge findet man nur heraus, wenn man rumdaddelt und einfach mal alles falsch macht.Ein solcher Fehler sollte beim Testen unbedingt auffallen - ansonsten wurde einfach geschlampt.
Lange Rede, kurzer Sinn: Bei Stichworten ist die Bedeutung der Begriffe 'enthält' und 'ist gleich' einfach vertauscht. Leider kann man den Text am Bildschirm nicht wegradieren und mit dem Kugelschreiber neu schreiben ;-)
Ich hoffe, das hat geholfen.

Adobe Media Encoder CS6 6.0.3-Update Beim Herunterladen dieses Updates ist ein Fehler aufgetreten. Schließen Sie die Installation und wiederholen Sie die Installation zu einem späteren Adobe refuses support. I've paided for the product but they don't care

Adobe Media Encoder CS6 6.0.3-Update
Beim Herunterladen dieses Updates ist ein Fehler aufgetreten. Schließen Sie die Installation und wiederholen Sie die Installation zu einem späteren Zeitpunkt. Fehlercode: U43M1D204

Ja wie gesagt es hat davor auch ohne Probleme Funktioniert nur war ich gezwungen das System neu zu Installieren und ab dann konnte ich die da oben genannten Updates nicht mehr Installieren. Ein Mac ist zwar eine schöne Sache kommt aber für mich nie in Frage da ich mein PC als Arbeitsrechner und Gamer Rechner nutze und das meiste läuft halt nicht auf einen Mac und man müsste manche Programme neu Kaufen, das sehe ich überhaupt nicht ein, und meine Anwendungen werden aus Prinzipien nicht für Apple Produkte entwickelt da verdient man kaum etwas... aber das muss jeder für sich entscheiden. An eine neue Version habe ich eventuell nächstes Jahr gedacht aber auch nur die CS6 ob man das brauch ist die Frage da CS 5 genau macht was es soll. Das Modell mit der Adobe Cloud hat zwar denn Vorteil das die Programme Aktuell sind aber man muss Monatlich dafür Zahlen und CS5/CS6 oder älter brauch man nur einmal Kaufen. Darüber hinaus finde ich eh das Adobe so eine richtige S*** ist wenn es um Support ältere Programme geht so zeigt Adobe meiner Meinung nach das Ihre Produkte nichts wert sind zumindest macht es den Anschein. Aber wie gesagt, bin ich hier um Hilfe zu bekommen um das Problem zu lösen ohne ein neue Version zu kaufen, das ist ja bekanntlich die einfachste Lösung, aber wenn Informatiker auch so denken würden dann würde es sehr schlecht aussehen... und als Anmerkung am Rande, es wäre ja nett wenn man mir denn Link dieser Updates zukommen lassen könnte um die Updates Manuell zu Installieren.
"Aber wie sollen wir denn Programme testen auf Hardware und OS, die es erst in ein paar Jahren geben wird."
Dies kann man in voraus natürlich nicht aber in nachhinein geht das und Software Entwickler denn etwas an Ihre Produkte liegt, machen das nachhinein auch und passen gegebenenfalls Ihr Produkt an.
PS: CS 2 läuft ebenfalls auf einem Windows 8.1 rechner ;-)

ERROR: DF024: Adobe Media Encoder CS6

I Have a 2012 Mac Pro running Mavericks. I started having issues with Premiere Pro after video card upgrade. I get the following error message when trying to reinstall CS6 Production Premium:
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR: DF024 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
----------- Payload: Adobe Media Encoder CS6 6.0.0.0 {CC006FD6-00EF-46FC-ACA0-7A28EFF44D20} -----------
ERROR: DF024: Unable to preserve original file at "/Applications/Adobe Media Encoder CS6/Adobe Media Encoder CS6.app/Contents/Frameworks/AdobeCrashReporter.framework/AdobeCrashReporter" (Seq 309)
I backed up, and deleted all Production Premium applications; ran the CC sweep tool, and got the same error.
Can anyone recommend a fix, or point me in the direction of an Adobe tech for more answers?

Oké, the next steps will remove all Adobe folders from your system, so put's you in a clean state where you should have no issues re-installing. Please be sure you have settings saved as a backup. The locations below will only clean the Adobe applications.
1. Please remove all adobe software from the machine (use uninstall or use the clean-tool)
Steps see: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2. Remove by hand all still existing Adobe entries: http://helpx.adobe.com/x-productkb/global/delete-previously-installed-application-files.ht ml
~ Files / Folders ~
/Applications/Adobe*
/Applications/.AdobePatchFiles
/Applications/Utilities/Adobe*
/Library/Application Support/Adobe*
/Library/Application Support/FLEXnet Publisher/
/Library/Preferences/com.adobe*
/Library/Preferences/FLEXnet Publisher/
/Users/[user]/Library/Application Support/Adobe*
/Users/[user]/Library/Caches/Adobe*
/Users/[user]/Library/Caches/com.adobe*
/Users/[user]/Library/Preferences/Adobe*
/Users/[user]/Library/Preferences/com.adobe*
+ Please notice that the [user] library in above steps is hidden by default:
http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html
3. Re-install and update the software.
http://helpx.adobe.com/creative-cloud/help/install-apps.html see Update apps
Good luck!

Adobe Media Encoder cs6 error 0xc000007b

Recently i installed Adobe Media Encoder CS6 , on start it showing application unable to start due this error 0xc000007b, please resolve ASAP, if anybody knows.

I just want to make sure anyone with the same problem who comes across this thread is made aware of some things to try and at least one solution that has worked for multiple people...
As the Adobe Staff member here mentioned, the 0xc000007b error usually has to do with a 32-bit/64-bit confusion on the machine. More specifically, as someone stated in a Windows forum: "this error is most likely a result of a 32-bit (x86) executable trying to load a 64-bit (x64) DLL."
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-the-applicati on-was-unable-to-start/05a2b904-3f61-4d08-94d6-e2ff92161111
What has worked for others is copy & pasting the msvcr100.dll & msvcr80.dll files from the After Effects Support Files folder to the folder of the app that is giving this error (usually Media Encoder or Premiere Pro or Lightroom). It was mentioned several times in the threads below, and worked for me as well...
http://forums.adobe.com/message/5020877#5020877
http://forums.adobe.com/message/4861711#4861711

Mac Pro restarts with kernel panic error during Adobe Premiere CS6 or Adobe Media Encoder CS6 render/encode.

Multiple times this week, my Mac Pro at work has been restarting during renders in Adobe Media Encoder CS6 and Adobe Premiere CS6. This seems to be specific on this computer only. Identical computers don't have this problem. Here is the system report after it reboots to OS X:
Interval Since Last Panic Report: 252068 sec
Panics Since Last Report:          2
Anonymous UUID:                    7DF9A04B-0693-5FC4-60CF-4BC6ABDB3C1E
Fri May 17 15:37:07 2013
panic(cpu 0 caller 0xffffff8009ab7e95): Kernel trap at 0xffffff8009e1b814, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x00000000000000b8, CR3: 0x000000000c3d3000, CR4: 0x00000000000206e0
RAX: 0x0000000000000001, RBX: 0xffffff8039ebfb98, RCX: 0xffffff800a08eb00, RDX: 0xffffff82413abde8
RSP: 0xffffff82413abde8, RBP: 0xffffff82413abe20, RSI: 0x00000000000000b8, RDI: 0x0000000000000001
R8: 0x0000000000000000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0x000000000000004a, R13: 0x0000000000000371, R14: 0xffffff8040611cb0, R15: 0xffffff80404ec008
RFL: 0x0000000000010206, RIP: 0xffffff8009e1b814, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0x00000000000000b8, Error code: 0x0000000000000002, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff82413aba80 : 0xffffff8009a1d626
0xffffff82413abaf0 : 0xffffff8009ab7e95
0xffffff82413abcc0 : 0xffffff8009acd4dd
0xffffff82413abce0 : 0xffffff8009e1b814
0xffffff82413abe20 : 0xffffff7f8bcf4d54
0xffffff82413abe60 : 0xffffff7f8bcf72f1
0xffffff82413abf20 : 0xffffff8009d86e2b
0xffffff82413abf60 : 0xffffff8009a3dcfe
0xffffff82413abfb0 : 0xffffff8009ab2977
      Kernel Extensions in backtrace:
         com.apple.nke.asp_tcp(7.0)[78FAA01C-ABC4-3AD3-8D9A-6187F7911E1A]@0xffffff7f8bce f000->0xffffff7f8bcfbfff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x0000000009800000
Kernel text base: 0xffffff8009a00000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 76945023460235
Model: MacPro5,1, BootROM MP51.007F.B03, 8 processors, Quad-Core Intel Xeon, 2.4 GHz, 20 GB, SMC 1.39f11
Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
Memory Module: DIMM 1, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
Memory Module: DIMM 2, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
Memory Module: DIMM 3, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
Memory Module: DIMM 4, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
Memory Module: DIMM 5, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
Memory Module: DIMM 6, 4 GB, DDR3 ECC, 1066 MHz, 0x857F, 0x463732353155363446393333334700000000
Memory Module: DIMM 7, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
Memory Module: DIMM 8, 1 GB, DDR3 ECC, 1066 MHz, 0x80CE, 0x4D33393142323837334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8E), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: ATI Radeon HD 5770, sppci_displaycontroller, Slot-1
Serial ATA Device: HL-DT-ST DVD-RW GH41N
Serial ATA Device: WDC WD1001FALS-41Y6A1, 1 TB
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd300000 / 2
USB Device: Apple Keyboard, apple_vendor_id, 0x024f, 0xfd320000 / 3
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x5a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0x5a110000 / 3
FireWire Device: built-in_hub, 800mbit_speed

That doesn't look like a complete panic report. Is there any more to it? Regardless, I suggest you run the extended form of the Apple Hardware Test. If it fails to identify a fault, remove the RAM upgrade and test with the original RAM.

Adobe Media Encoder CS6 Random Crashing Mid-Render

Hello -
I've been dealing with this issue for enough months and across enough computers to finally seek out some advise here, hope it works out...
Basically I've got a 2 hour long film that I've been trying to export using Adobe Media Encoder CS6. It's never made it all the way through. I can usually skim through the generated quicktime file up to the point where the crash occurred. I've tried using that as a reference to check out my sequence in Premiere but there is never anything suspicious going on there. Most frustratingly the crash occurs randomly. Sometimes it will go through 10 minutes of the film; sometimes an hour. Regardless I get a crash with a report that has no specific information.
Footage:
r3d - Various resolutions, all being cut in a 2048x1152 sequence.
Quicktime mov - ProRes4444 for the most part.
Machine(s):
I had been attempting to render this for the past few months with a Macbook Pro running OSX 10.8.4 w/ 16GB RAM, 2.7 GHz Intel i7, NVIDIA GeForce GT 650M 1024MB - never made it through a render longer than 50 minutes of the 2 hours.
We recently got one of the new 2013 Mac Pro systems running OSX 10.9 w/ 16GB RAM, 3.5 GHz 6-Core Intel Xeon E5, AMD FirePro D500 3072 MB
The hope was that this new powerful machine would overcome the issues we were running into with these renders. Since I'm posting this now you can probably figure out that it didn't really work out that way...
Software:
AME- 6.0.2.81
Premiere - 6.0
I know there are updates to be used here, but whenever I update Premiere from just 6.0, the project itself becomes a buggy mess, crashing constantly. I also run Creative Cloud and have tried to just jump over to Premiere CC hoping all my problems would vanish, but instead, I again get a buggy project that constantly crashes. The only version of Premiere that seems to work with this project is 6.0, so general updates have not been useful (and instead damaging, I've wasted several days trying everything I possibly can to make the project work in the updates).
Any help appreciated. Thanks.

Thanks for the reply MMeguro.
Last night I was able to get my first full render through by doing a combination of things (so I'm not sure what did the trick in the end).
To answer some questions first, never attempted to do the FULL render directly out of Premiere, always switched over to AME for that, so that potentially could work too. Smaller renders have worked directly out of Premiere Pro, but they've also worked out of AME.
The initial render attempts that had been failing for the last few months were on the MBP which did not support GPU accleration due to an incompatible graphics card. I assumed the issue must be tied to something else because of this and was using it on the renders with the new 2013 Mac Pro. Using the workflow of Pr6.0, AME 6.0 and GPU rendering turned ON, I was failing to render to both Quicktime h264 and ProRes 422.
What worked for last night's render:
1. Convert Pr6.0 project to PrCC project (when I've done actual editing in CC after converting this project it tends to crash, but I figured just generating the project itself without doing any editing in it might satisfy what I was attempting to do).
2. Open AME CC and import PrCC Sequence. Used custom ProRes 422 setting.
3. Turned OFF GPU acceleration.
So as long as I the PrCC project I create stays stable long enough to save it (without crashing, which has been a problem with that Pr6.0 to PrCC conversion) then it seems like this will work. Kind of an annoying couple extra steps but I'm just out of my mind glad that I can actually render this thing finally. We're still in the rough stages so being able to turn around a review version within a day is very important.
Wish I could do more tests to figure out exactly which combination actually made this work for the benefit of others, but can't afford to do multiple 10 hour+ renders with random crash times.
Anyway, thanks again for the reply MMeguro much appreciated.

FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6

Could you please attempt to shed some light on why FLVs created with ADOBE MEDIA ENCODER CS6 do not display thumbnails in ADOBE BRIDGE CS6, yet apple finder is able to display thumbnails for these same FLVs without issue?
I'm running CS6 Production Premium with ALL updates installed on 10.6.8
I appreciate any input and help provided the input is provided by someone who either
A) knows the answer because they actually work for adobe
B) actually tried this themselves before attempting to provide a solution
If the conclusion is that it is a codec issue or a header issue with the FLVs You'd have to present a very strong case to back that claim up as it makes no sense whatsoever that CS6 is unable to generate thumbnails for media encoded using CS6, yet Apple finder can without issue. NOT to mention the FLVs in question are CREATED on the same machine with the same codecs installed that is trying to generate previews in Bridge.
Apologies if my frustration is showing, I've gotten and seen several... incompetent replies on this forum regarding this issue and it has never been actually addressed properly as far as I can tell by Adobe support.

We are all just incompetent users here. As pointed out before this is just a user to user forum, Adobe rarely checks in.
I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

Adobe Media Encoder CS6 (6.0.1) update available

The Adobe Media Encoder CS6 (6.0.1) update is available.
It has bug fixes and some new features.
You'll see from the post above that one of the features is left somewhat unexplained for the moment. That's because we wanted to get the bug fixes for Adobe Media Encoder out as soon as possible, rather than hold this update and wait for it to coincide with certain other events. Stay tuned. We'll have more information about that new feature quite soon.

I'm having a problem with Media Encoder 6.0.1 - it will encode for a few minutes, then slow down and sit, and then stop with an error (Error compiling movie. Unknown error). This happens with both h.264 and MPEG2, exporting 1080p. This is with Windows 7, and the Task Manager shows the used memory increase and the CPU usage increase when ME starts, and when it slows down the CPU usage stops and the memory usage goes down.
(When it stops with the error it makes a loud noise, like a goat dying! Must be the programmers idea of how to notify there is an error!)
This is happening on two different computers running Production Premium CS6 , and is pretty consistent between the two. I don't know if ME 6.0 had this issue, only had CS6 a few days before the 6.0.1 update and may not have exported a file. There have been no encoding issues at all with CS5 and CS5.5.
Any ideas what is causing this - something in the setup? A bug?

Adobe Media Encoder CS6 crashes when quit

OS X 10.7.4
Multiple hardware types
Adobe Media Encoder CS6 as installed from Adobe Production Premium CS6. NOTE: CS6 was installed under a different user than the new user that is having AME crash.
Issue:
Open AME. Encode a file or do not encode a file because the end result does not matter. Now quit AME (either hotkey or File --> Quit). AME then crashes. Keep in mind that no other CS6 programs are affected this way, just AME.
I ran into this problem weeks ago and found a solution that worked. The fix was to delete one of the many many folders Adobe creates in your user folder. The problem now is I cannot find that same posting where the fix was listed.
I deleted this "mystery folder" we will call it and then AME CS6 worked fine. The catch was that I had to redo the whole "Adobe ID" sign in BS and retype the serial number when I opened one of the other programs.
Any guesses as to where this folder might be so I can delete it again? I was hoping some others may have run into this same issue. I will keep looking for the fix, and post it back here if I finally find it.

Just deleting the Adobe Media Encoder folder in the given directory works just fine and this saves a lot of trouble because your settings are maintained as are your presets.
But thanks a lot for the help

Adobe Media Encoder CS6 completely missing from Mastercollection CS6

Computer Environment:
MacBook Pro Early 2011
Graphics AMD Radeon HD 6490M 256 MB
Memory 16 GB 1333 MHz DDR3
SSD with 512GB; about 81GB are still free
Mavericks OS X 10.9.5
Adobe Mastercollection CS6
Quicktime Player (Standard)
Problem:
I am currently missing the sidekick Adobe Media Encoder (AME), even though I succesfully can run After Effects and Premier Pro.
I cannot locate the AME app anywhere on my hard drive to launch it manually.
Steps/general information:
I initially was able to run AME, after fixing another problem with launching it by deleting the ExportQuickTimeHost.bundle / QuicktTimeHost.bundle as I have described in another post (https://forums.adobe.com/message/7221143#7221143 – #26 is my post).
Unfortunately, the presets for Quicktime (I needed prores) were missing, even after I have done a workaround, by copying prores-codecs into AME plugins, as described in this post: martin-thoburn.com » Install the Apple ProRES codec without Final Cut or ProApps
The next time launching QuickTime, I was not able to open it again.
I uninstalled, reinstalled and updated After Effects and Premier Pro three times now and took away the QuickTimeHost.bundle from AME and Premiere Pro
I also tried resetting ACL (through Utilities, when starting the MacBook with option key pressed down) as suggested by Seth Goldin in the post https://forums.adobe.com/thread/1010136
I already tried wiping down the whole Adobe Suite, using the Cloud Cleaner Tool, delete the presets in the user library and then reinstall the apps: Photoshop, Illustrator, Indesign, Acrobat, After Effects and Premiere Pro. There is now only the CS6 (and not for example some CC apps) on my Computer. All apps are up to date.
I didn't install any other codecs by accident.
Since AME was again not launching (Splash screen wasn't showing me any plugins, AME could have loaded). I simply deleted AME by trashing it.
Now it's completely gone, even after reinstalling (and launching) After Effects and Premier Pro.
By trying to install AME's updates (6.0.1 and 6.0.2) I naturally get an error message, since the main app is missing.
I have battled with AME about half a year now, so things like reinstalling Lion and then Mavericks has occurred before as well.
And unfortunately, I am in the middle of a big project, which is due in a month and two days. Hope the links are not too confusing
– please look through them though, as the solutions I tried out are very clearly written in those posts.
Any help would be greatly appreciated.

Update in chronological order:
I uninstalled the Cloud, which I kept for making updates; I also uninstalled everything from Adobe (CS6 mastercollection)
I ran the Cloud cleaner tool
I reinstalled only Photoshop, Illustrator, Indesign, Premier Pro, After Effects and Acrobat. Bridge and AME were installed as sidekicks of Photoshop and AE/PP.
So this has solved problem 1 already.
On to problem 2 (update only):
updated all adobe software, incl. DynamicLinkMediaServerRetail-1.0.1-mul-AdobeUpdate
I installed Final Cut Pro 7
I (re)installed Quicktime 7.6.6*
I downloaded the Prores Presets for AME (as you suggested in post #2)
I tried opening AME – that did not work, as it hung on the ExporterQuicktimeHost.bundle
Went to AME app, right clicked on app icon to get "Show package content">Contents>Plug-Ins>Common and deleted ExporterQuickTimeHost.bundle and ImporterQuickTimeHost.bundle
repeated last step with Premiere Pro and AE
I opened AE
I tried importing the presets through AME>import>presets... That did not work. I get this pop-up message:
restarted my computer
tried again to import AME without luck
tried the solution of this discussion Re: Quicktime Export options are missing (only in AME) (post #8)
since I noticed that mine was changed back after the reinstallation. No luck.
restarted the computer again. No luck.
Put back only the ExporterQuicktimeHost.bundle into AME's package content
tried to open AME without luck
removed the Quicktimebundle once more to open AME (worked)
opened PP to check if I could export in queue: AME does not open by itself, still.
I tried opening a prores file (end as .mov) that I encoded at university (not on my provate computer) – did not worl
I checked if I could open a mov-file which was not encoded to prores: that worked.
I looked into Martin Thoburn's method again to try one more time in AME to find the settings "Quicktime". No luck.
I also have a third problem that may be linked to this, since it also has to do with PP and AE:
Re: Can anyone help? "DynamicLink" not available attempting to open Mov in Photoshop CS6
My post there is #22.
But now that I absolutely made sure that I do have the prores codecs,
I strongly suspect that it may also be a problem, which is discussed here:
Are the ProRes codec and .MOV file no longer supported?
...namely, that the codecs are just not visible. Unfortunately, this discussion is not resolved either.
HarleyTDavis's post #30 of this discussion Are the ProRes codec and .MOV file no longer supported?
suggests something complicated (because I yet would need another Adobe version), which I may try at some point.
Alright. That is all the effort that I can afford in time for this. I am too exhausted to go on so I'll do a workaround in FCP
– now that I got it – and will ask someone else to encode my outcome to a prores-Version.
If I feel like it – and yeah, I'd rather work with the Adobe Suite CS6 mostly – I'll come back to this discussion after a having clean wiped my computer and reinstalled everything.
Thanks to both of you for looking into this with me. I'm positive this can be solved – just not now.

Adobe Media Encoder CS6: Freezes after starting encoding process

Adobe Media Encoder CS6: When trying to export media I Click on the Queue tab. I then click the Start button. The program shows the first few frames in the review window and then freezes with no error codes or any other notifications. Clicking on the S
I am running Adobe Media Encoder CS66.0.3.1 on Win7 64 with Intel i7-4770K CPU 16 GB Ram.
The source file is 1920 X 1080 29.97 fps. Output file is H.264 Android Tablet 1080 P 29.97 fps
I do not see any indication what so ever of what is going wrong. I have uninstalled the program completely and re installed it with no effect.
Need some help!

Can you export directly from Premiere Pro?
Have you tried disabling GPU acceleration?

.wmv mit Adobe Encoder Cs6?

Similar Messages

Maybe you are looking for