Won't load startup config

I've got a strange problem where the router won't boot with the startup config. When I type 'sho start' I see my config displayed but when I type 'sho run' it shows the generic config with none of the changes I made. Also, every time I power cycle the router it comes up with the following:
Would you like to enter the initial configuration dialog? [yes/no]:
When I type 'copy start run' and then 'sho run' I see my configuration changes in the running config. However when I power cycle the router it comes back up wit the initial configuration dialog and none of my configuration changes are in the running config????
I tried going through the initial configuration dialog, choosing the basic setup and assigning just a hostname and ip address to e0/0 but when I power cycle the router it still comes back up with the initial configuration dialog and doesn't have any of my changes in the running config.
What the heck is going on here?

Hi,
Issue the show version command and check the last line where it says config register.
If it is not set to (config-register 0x2102) then your router will not load startup-configuration file.
To resolve this go to configuration mode and change the value to be config-register 0x2102.
then copy startup-config to running-config and
then write memory (or copy running-configuration to startup-configuration) and reload the router.
your router should now load the startup-configuration.
Hope This Helps
Regards
Shaheen

Similar Messages

How to load a config file at appliaction startup

Hi
Is there a way to load a config file at application startup?
I have the DB conection info in a config file.
Right now m accessing that info by loading it using a classloader n then parsing it.
When ever i access the DB this file is loaded n parsed.
I want it to be loaded only once at startup n get cached.
Then later on whenever i refer it, i shud get the cached copy.
Is there a way to do this?

Or you could just include a relevant static block.
For instance you could have a utility class for accessing your DB in which you wrap jdbc code for querying, updating etc. This class would have code like the following:
public class DBBean {
   private static DataSource ds = null;
   static {
      loadDataSource();
   public static loadDataSource() {
      // load your property file with the configuration info and setup your datasource
   public static void doSomething() {
      Connection con = ds.getConnection();
}By placing initialization code in a public (?) method you can call this method to re-initialize your DataSource if e.g. you updated your datasource settings.
Hope this helps

System won't load after startup repair - Satellite A500

Hi guys,
I've got a problem with my laptop. I shut down my laptop directly by switching off from the switch. After I start the laptop the system recommends startup repair but it was unable to repair and after that it just went up to the welcome page and it won't load anymore.
Do anyone have any idea what is the problem?
Thank you

hi plioe,
can you run chkdsk on the hdd?
do you hear unusual sounds from the harddisk?
it seems that your harddisk has some problems...
this causes a slow startup or failure to boot...
but to be sure a recovery is recomended in some cases the software configuration went bad...

Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, anyone had this problem and has advice?

Hi there not sure what I did wrong but got a message asking if I would allow the application config but was warned by commputer not to now I can't log into some sites and others won't load properly, some sites will log in but only if the stay logged in box is not checked,I'v have cleared my cashe and internet history looked through securtity setting but nothing, anyone had this problem and has any advice?

See KB Article: http://support.apple.com/kb/HT1274 Changing or resetting an account password
my current country does not have a apple store....
AS are not the only places that repair Macs. Check out the following:
International AASP’s & Other Services
AASP's Outside of the USA
How to find your nearest Apple Authorized Service Provider (AASP)
Also, there are User Groups that can possible help.

SUP720 load specific config to startup during rommon

Hello Freinds,
Wendering if there is any tips to load specific file configuration(from disk0) to startup during rommon load, we need this to avoid "double" reload
when replacing new RMA SUP720, this will help to load correct config prior IOS loading without need to copy from file to startup config or
erease startup and copy the correct config while IOS already loaded thus, second reload is required.
any tips will be appreicated.
Mohamed.

Hello Reza,
Thanks alot for your support, thus twice reload is required :-(
Mohamed.

IMac makes a loud beep on start up, won't load past the blue screen and the black ticking dial appears every few seconds in centre of screen.

Urgent help!
Out of the blue my mac lost the mouse cursor even though it had connection so I rebooted only for the mac to make a loud beep on start up then get stuck at the blue loading screen. It won't load past the blue screen. I've tried to reboot holding down the shift key but no change. I've also shut down, unplugged the main for 15 seconds, re plug and wait 5 seconds before starting up again but no change. Does anyone have any suggestions?
PS: I'm not too sure which systems I am running without being able to check in about this mac. I bought my imac in January or February 2011 if that helps.

The power on self-test resides in the ROM of the computer. This test runs whenever the computer is turned on after being fully shut down (the power-on self-test does not run if the computer is only restarted).
If a fault is detected during the test, you will not hear a normal startup chime. Instead, the system will beep as explained below. If you experience one of these beeps, you may call your Apple Authorized Service Provider for additional troubleshooting assistance.
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
http://support.apple.com/kb/HT1547

Satellite M55-s3293 won't load windows xp

my Satellite M55-s3293 won't load windows xp. I press the power button, the fan runs for a few seconds, than I see the toshiba screen and it freezes. I get a message to press f2 to enter setup, f12 for boot device selection menu. I've gone into both menu's, to no avail.
If I wait for a minute or so, I get a message saying that windows did not start sucessfully . I have options to start in safe mod, last known good config, or normally. I've tried each of those selections, but get the same frozen toshiba screen with message to select f2 or f12. my cd drive will not open to allow me to try a recovery disk.
Do you have any suggestions for me please.
Thanks
Just tried f8 during startup and got tech info:
stop: 0x00000024 (0x00190203, 0x86efa828, 0xc0000102, 0x00000000)

Hello Jane and welcome in Toshiba forum
After reading your posting I must say that best and easiest solution for you is to reinstall operating system using original Toshiba recovery DVD. This DVD contains operating system, all necessary drivers, Toshiba specific tools and utilities. After recovery image installation you will have out-of-box state and clean preinstalled OS.
Yes, this should fix your problem. Please note: when you do this all saved data will be deleted.
Do you have some important data saved on your notebook?
If not use this disc reinstall Vista and everything should be ok again.

Can't log in - desktop won't load

Hi, and thanks for reading this. I hope someone here can help me.
I have a G4 flat-panel iMac, running 10.2.8. Bought brand new in 2002 and have had no problems, with the exception of the hard drive going out a few months later and replaced under warranty. (Apparently a few of the dual-boot machines had this problem.) They also upgraded the OS to 10.2.8 and the computer has run beautifully ever since. Until the other night.
I was online and the modem disconnected but Internet Connect kept displaying "Disconnecting". This happens on occasion and the only way out of it is to shut down the computer and restart. So I did, and when the computer restarted I could not log in. The computer started as usual and seemed fine, the log-in screen appeared, I entered my password, the computer said "logging in", a blue screen appeared briefly... and then kicked back to the login screen. The desktop never appeared.
After several tries of that, I decided to reset my password (with the system CD). It let me reset my password and the computer recognized the fact I had changed my password. (You know how the log-in screen "shakes" to signal a wrong password - that never happened.) I tried to log in again and it said "logging in"... and returned to the log-in screen. The same thing happened when I tried the root user account.
I was able to start up from my Norton CD and changed the startup disk to 9.2. In 9.2, I can see the contents of my hard drive including my User folder in OS X and everything that had been on my desktop in OS X is right there in the "desktop" folder for my user name. I can move, copy, and delete things there. It's all there; the desktop just won't load when I start in OS X.
I don't know if it helps, but in 9.2, the computer recognizes my ZIP drive, CDs, and my Wacom tablet and mouse.
I have gone through the discussion boards and articles here and cannot find where anyone else has had the exact same problem. I have tried the possible solutions below, and none of them have changed anything:
* Norton Utilities (Disk Doctor) - fixed some minor errors, then ran it again and no problems were found.
* Safe Boot - I couldn't get the mouse to work, and when I figured out the keyboard "shortcuts" to log in, I got the same thing as before... "logging in" and then getting kicked back to the log-in screen.
* Disk Utility (from the Mac OS X install CD) - it fixed a couple things then said that my hard drive appeared to be okay.
* fsck (single-user mode) - it said that "Macintosh HD appears to be OK". So at least the hardware seems okay.
* Rebuilding desktop - a long shot but I figured it was worth a try; nothing changed.
* Reset privileges (single-user mode) - as far as I can see, nothing changed even after doing this.
* Startup items (folder) - nothing seems out of place.
* Disable log-in items - I still couldn't log in
* In single-user mode: when trying one of the suggestions from an article here, I typed "cd/Users/{my user name}/Library, then mv Preferences Preferences_old, and received a message stating "no such file or directory."
Looking through the contents of my hard drive, I can see that there is a Desktop icon for OS 9, but not anything for OS X. In theory, shouldn't there also be a desktop icon for OS X? Has my computer somehow lost its "connection" or "map" to my OS X desktop? I ran fsck again today so that I could look at logs/parse failed/plist/etc (an article I found here on apple.com) and following those steps, I noticed there was a line that said "root device is mounted read-only." So I can only assume that has to do with the fact my OS X desktop doesn't load.
So, with all that being said (it's a lot, I know, and I hope it all makes sense) ... Is this problem something simple that I can fix myself, or do I need to take it into the shop and have a technician look at it? As you can imagine, this is all getting very frustrating, with limited access to an old version of Photoshop, SimpleText, and a very old web browser that only works on a few sites (and thankfully Apple.com is one of them). I miss my OS X.
Thanks again for reading this, and for any advice/assistance you may be able to provide.

Thanks, Anna. Excellent work. Everything seems fine, except, of course, the booting OS X part.
First try Resetting the PRAM
• Shut down the computer.
• Locate the following keys: Command, Option, P, and R. You will need to hold these keys down simultaneously later.
• Turn on the computer.
• Press and hold the Command + Option + P + R keys immediately after the startup chime.
• Hold keys down until you hear the startup chime for the third time.
• Release the keys and immediately and allow computer to boot.
The fact that you can boot in Safe Mode suggests that you may have a Login item that conflicts with the startup process. If resetting PRAM does not work try this:
Boot computer in Safe Mode.
If you are able to get into the Login items (Apple Menu > System Preferences > Accounts > Login Items) make a note of all the log in items (write it down). Then delete them all by selecting each one in turn and clicking the minus sign under the list. Shut down and try booting the computer normally. If you are able to boot successfully add the Login items on your list one by one and try rebooting each time you have added one. This should help you isolate the offending item.
I hope one of these methods works. Post back and let me know.
cornelius

My phone (ZTE Savvy) won't load certain pages. Why? And how do i fix it?

So the website worked for a little bit just fine. (www.quotev.com) now it won't load the page at all. I've tried EVERYTHING. I've taken out the battery, cleared the history, tried different browsers, shut the data off and turned it back on, shut down and started back up, moved to a different state (Though that was because of something else) and nothing works. It has to be connected to a source of wifi. Help?

What is the error that you receive when it does not load?
Does this happen on multiple wifi connections?
If it is a timeout issue you can change the amount of time Firefox takes to timeout on a connection. However this will not change the timeout time for the server that it is trying to connect to.
#Open about:config
#search for timeout and change dom.min_background_timeout_value to a larger number.
Otherwise, please provide the error that you get to better support this issue :-)

[SOLVED] KDE Won't loading

Hello everyone.
After reboot KDE won't loading anymore (after KDM login, stuck for ~30 sec at last stage and then appears only cursor).
Here the my xerrors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(1074) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(1074) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(1074) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.6'
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kded(1073)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
kded(1073) PowerDevil::Core::loadProfile: The profile "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kwin(1106) KDecorationPlugins::canLoad: "****** The library /usr/lib/kde4/kwin3_deKorator.so has no API version ******"
kwin(1106) KDecorationPlugins::canLoad: ****** Please use the KWIN_DECORATION macro in extern "C" to get this decoration loaded in future versions of kwin
kwin(1106): ""fsrestore1" - conversion of "0,0,0,0" to QRect failed"
kwin(1106): ""fsrestore2" - conversion of "0,0,0,0" to QRect failed"
kwin(1106): ""fsrestore3" - conversion of "0,0,0,0" to QRect failed"
kwin(1106): ""fsrestore4" - conversion of "0,0,0,0" to QRect failed"
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1111)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
Could not resolve property : linearGradient5334
Could not resolve property : linearGradient5332
Could not resolve property : linearGradient5326
Could not resolve property : linearGradient5328
Could not resolve property : linearGradient5334
Could not resolve property : linearGradient5332
Could not resolve property : linearGradient5326
Could not resolve property : linearGradient5328
Could not resolve property : linearGradient5334
Could not resolve property : linearGradient5332
Could not resolve property : linearGradient5326
Could not resolve property : linearGradient5328
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kdm.log
Note that your system uses syslog. All of kdm's internally generated messages
(i.e., not from libraries and external programs/scripts it uses) go to the
daemon.* syslog facility; check your syslog configuration to find out to which
file(s) it is logged. PAM logs messages related to authentication to authpriv.*.
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
Loading extension NV-GLX
Loading extension NV-CONTROL
Loading extension XINERAMA
klauncher(2730) kdemain: No DBUS session-bus found. Check if you have started the DBUS server.
kdeinit4: Communication error with launcher. Exiting!
kdmgreet(2724)/kdecore (K*TimeZone*): KSystemTimeZones: ktimezoned initialize() D-Bus call failed: "Not connected to D-Bus server"
kdmgreet(2724)/kdecore (K*TimeZone*): No time zone information obtained from ktimezoned
Xorg.0.log
[ 800.377]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 800.377] X Protocol Version 11, Revision 0
[ 800.377] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 800.377] Current Operating System: Linux Spotlight 3.12.4-pf #1 SMP PREEMPT Wed Feb 19 23:20:59 EET 2014 x86_64
[ 800.377] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-pf root=UUID=8b2512bb-5fc1-47b9-a43d-e7b3d76bf8de rw quiet apparmor=1 security=apparmor scsi_mod.scan=sync
[ 800.377] Build Date: 09 January 2014 08:47:24AM
[ 800.377]
[ 800.377] Current version of pixman: 0.32.4
[ 800.377] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 800.377] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 800.377] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 24 18:23:57 2014
[ 800.377] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 800.377] (==) No Layout section. Using the first Screen section.
[ 800.377] (==) No screen section available. Using defaults.
[ 800.377] (**) |-->Screen "Default Screen Section" (0)
[ 800.377] (**) | |-->Monitor "<default monitor>"
[ 800.377] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 800.377] (**) | |-->Device "Nvidia Card"
[ 800.377] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 800.377] (==) Automatically adding devices
[ 800.377] (==) Automatically enabling devices
[ 800.377] (==) Automatically adding GPU devices
[ 800.377] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 800.377] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 800.377] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 800.377] (II) Loader magic: 0x804c80
[ 800.377] (II) Module ABI versions:
[ 800.377] X.Org ANSI C Emulation: 0.4
[ 800.377] X.Org Video Driver: 15.0
[ 800.377] X.Org XInput driver : 20.0
[ 800.377] X.Org Server Extension : 8.0
[ 800.377] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 800.378] (--) PCI:*(0:1:0:0) 10de:0615:0000:0000 rev 162, Mem @ 0xf2000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[ 800.378] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 800.378] Initializing built-in extension Generic Event Extension
[ 800.378] Initializing built-in extension SHAPE
[ 800.378] Initializing built-in extension MIT-SHM
[ 800.378] Initializing built-in extension XInputExtension
[ 800.378] Initializing built-in extension XTEST
[ 800.378] Initializing built-in extension BIG-REQUESTS
[ 800.378] Initializing built-in extension SYNC
[ 800.378] Initializing built-in extension XKEYBOARD
[ 800.378] Initializing built-in extension XC-MISC
[ 800.378] Initializing built-in extension SECURITY
[ 800.378] Initializing built-in extension XINERAMA
[ 800.378] Initializing built-in extension XFIXES
[ 800.378] Initializing built-in extension RENDER
[ 800.378] Initializing built-in extension RANDR
[ 800.378] Initializing built-in extension COMPOSITE
[ 800.378] Initializing built-in extension DAMAGE
[ 800.378] Initializing built-in extension MIT-SCREEN-SAVER
[ 800.378] Initializing built-in extension DOUBLE-BUFFER
[ 800.378] Initializing built-in extension RECORD
[ 800.378] Initializing built-in extension DPMS
[ 800.378] Initializing built-in extension Present
[ 800.378] Initializing built-in extension DRI3
[ 800.378] Initializing built-in extension X-Resource
[ 800.378] Initializing built-in extension XVideo
[ 800.378] Initializing built-in extension XVideo-MotionCompensation
[ 800.378] Initializing built-in extension XFree86-VidModeExtension
[ 800.378] Initializing built-in extension XFree86-DGA
[ 800.378] Initializing built-in extension XFree86-DRI
[ 800.378] Initializing built-in extension DRI2
[ 800.378] (II) LoadModule: "glx"
[ 800.378] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 800.385] (II) Module glx: vendor="NVIDIA Corporation"
[ 800.385] compiled for 4.0.2, module version = 1.0.0
[ 800.385] Module class: X.Org Server Extension
[ 800.385] (II) NVIDIA GLX Module 331.38 Wed Jan 8 19:10:17 PST 2014
[ 800.385] Loading extension GLX
[ 800.385] (II) LoadModule: "nvidia"
[ 800.385] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 800.385] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 800.385] compiled for 4.0.2, module version = 1.0.0
[ 800.385] Module class: X.Org Video Driver
[ 800.385] (II) NVIDIA dlloader X Driver 331.38 Wed Jan 8 18:51:00 PST 2014
[ 800.385] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 800.385] (++) using VT number 7
[ 800.386] (II) Loading sub module "fb"
[ 800.386] (II) LoadModule: "fb"
[ 800.387] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 800.387] (II) Module fb: vendor="X.Org Foundation"
[ 800.387] compiled for 1.15.0, module version = 1.0.0
[ 800.387] ABI class: X.Org ANSI C Emulation, version 0.4
[ 800.387] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 800.387] (II) Loading sub module "wfb"
[ 800.387] (II) LoadModule: "wfb"
[ 800.387] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 800.387] (II) Module wfb: vendor="X.Org Foundation"
[ 800.387] compiled for 1.15.0, module version = 1.0.0
[ 800.387] ABI class: X.Org ANSI C Emulation, version 0.4
[ 800.387] (II) Loading sub module "ramdac"
[ 800.387] (II) LoadModule: "ramdac"
[ 800.387] (II) Module "ramdac" already built-in
[ 800.387] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 800.387] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 800.387] (==) NVIDIA(0): RGB weight 888
[ 800.387] (==) NVIDIA(0): Default visual is TrueColor
[ 800.387] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 800.387] (**) NVIDIA(0): Option "NoLogo" "true"
[ 800.387] (**) NVIDIA(0): Option "TripleBuffer" "true"
[ 800.387] (**) NVIDIA(0): Enabling 2D acceleration
[ 800.821] (II) NVIDIA(0): Display (BenQ GL940 (DFP-0)) does not support NVIDIA 3D Vision
[ 800.821] (II) NVIDIA(0): stereo.
[ 800.821] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 800.822] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
[ 800.822] (--) NVIDIA(0): Memory: 524288 kBytes
[ 800.822] (--) NVIDIA(0): VideoBIOS: 62.92.9a.00.00
[ 800.822] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 800.826] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 250 at PCI:1:0:0
[ 800.826] (--) NVIDIA(0): CRT-0
[ 800.826] (--) NVIDIA(0): CRT-1
[ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0) (boot, connected)
[ 800.826] (--) NVIDIA(0): DFP-1
[ 800.826] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[ 800.826] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0): Internal Dual Link TMDS
[ 800.826] (--) NVIDIA(0): BenQ GL940 (DFP-0): 330.0 MHz maximum pixel clock
[ 800.826] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
[ 800.826] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
[ 800.826] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 800.826] (**) NVIDIA(0): device BenQ GL940 (DFP-0) (Using EDID frequencies has been
[ 800.826] (**) NVIDIA(0): enabled on all display devices.)
[ 800.827] (==) NVIDIA(0):
[ 800.827] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 800.827] (==) NVIDIA(0): will be used as the requested mode.
[ 800.827] (==) NVIDIA(0):
[ 800.827] (II) NVIDIA(0): Validated MetaModes:
[ 800.827] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 800.827] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 800.859] (--) NVIDIA(0): DPI set to (84, 84); computed from "UseEdidDpi" X config
[ 800.859] (--) NVIDIA(0): option
[ 800.859] (--) Depth 24 pixmap format is 32 bpp
[ 800.859] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 800.861] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 800.861] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 800.861] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 800.861] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 800.861] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 800.861] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 800.861] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 800.861] (II) NVIDIA(0): Config Options in the README.
[ 800.866] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 800.893] Loading extension NV-GLX
[ 800.905] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 800.905] (==) NVIDIA(0): Backing store enabled
[ 800.905] (==) NVIDIA(0): Silken mouse enabled
[ 800.906] (==) NVIDIA(0): DPMS enabled
[ 800.906] Loading extension NV-CONTROL
[ 800.906] Loading extension XINERAMA
[ 800.906] (II) Loading sub module "dri2"
[ 800.906] (II) LoadModule: "dri2"
[ 800.906] (II) Module "dri2" already built-in
[ 800.906] (II) NVIDIA(0): [DRI2] Setup complete
[ 800.906] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 800.906] (--) RandR disabled
[ 800.909] (II) Initializing extension GLX
[ 800.933] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 800.933] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 800.933] (II) LoadModule: "evdev"
[ 800.933] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 800.933] (II) Module evdev: vendor="X.Org Foundation"
[ 800.933] compiled for 1.15.0, module version = 2.8.2
[ 800.933] Module class: X.Org XInput Driver
[ 800.933] ABI class: X.Org XInput driver, version 20.0
[ 800.933] (II) Using input driver 'evdev' for 'Power Button'
[ 800.933] (**) Power Button: always reports core events
[ 800.933] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 800.933] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 800.933] (--) evdev: Power Button: Found keys
[ 800.933] (II) evdev: Power Button: Configuring as keyboard
[ 800.933] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 800.933] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 800.933] (**) Option "xkb_rules" "evdev"
[ 800.933] (**) Option "xkb_model" "pc104"
[ 800.933] (**) Option "xkb_layout" "us"
[ 800.943] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 800.943] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 800.943] (II) Using input driver 'evdev' for 'Power Button'
[ 800.943] (**) Power Button: always reports core events
[ 800.943] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 800.943] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 800.943] (--) evdev: Power Button: Found keys
[ 800.943] (II) evdev: Power Button: Configuring as keyboard
[ 800.943] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 800.943] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 800.943] (**) Option "xkb_rules" "evdev"
[ 800.943] (**) Option "xkb_model" "pc104"
[ 800.943] (**) Option "xkb_layout" "us"
[ 800.944] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 800.944] (II) config/udev: Adding input device SONiX USB Device (/dev/input/event13)
[ 800.944] (**) SONiX USB Device: Applying InputClass "evdev pointer catchall"
[ 800.944] (II) Using input driver 'evdev' for 'SONiX USB Device'
[ 800.944] (**) SONiX USB Device: always reports core events
[ 800.944] (**) evdev: SONiX USB Device: Device: "/dev/input/event13"
[ 800.944] (--) evdev: SONiX USB Device: Vendor 0xc45 Product 0x7711
[ 800.944] (--) evdev: SONiX USB Device: Found 9 mouse buttons
[ 800.944] (--) evdev: SONiX USB Device: Found scroll wheel(s)
[ 800.944] (--) evdev: SONiX USB Device: Found relative axes
[ 800.944] (--) evdev: SONiX USB Device: Found x and y relative axes
[ 800.944] (II) evdev: SONiX USB Device: Configuring as mouse
[ 800.944] (II) evdev: SONiX USB Device: Adding scrollwheel support
[ 800.944] (**) evdev: SONiX USB Device: YAxisMapping: buttons 4 and 5
[ 800.944] (**) evdev: SONiX USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 800.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.4/1-10.4:1.0/input/input13/event13"
[ 800.944] (II) XINPUT: Adding extended input device "SONiX USB Device" (type: MOUSE, id 8)
[ 800.944] (II) evdev: SONiX USB Device: initialized for relative axes.
[ 800.944] (**) SONiX USB Device: (accel) keeping acceleration scheme 1
[ 800.944] (**) SONiX USB Device: (accel) acceleration profile 0
[ 800.944] (**) SONiX USB Device: (accel) acceleration factor: 2.000
[ 800.944] (**) SONiX USB Device: (accel) acceleration threshold: 4
[ 800.944] (II) config/udev: Adding input device SONiX USB Device (/dev/input/mouse0)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event7)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event6)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event5)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event12)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event11)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.944] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event10)
[ 800.944] (II) No input driver specified, ignoring this device.
[ 800.944] (II) This device may have been added with another device file.
[ 800.945] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event9)
[ 800.945] (II) No input driver specified, ignoring this device.
[ 800.945] (II) This device may have been added with another device file.
[ 800.945] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event8)
[ 800.945] (II) No input driver specified, ignoring this device.
[ 800.945] (II) This device may have been added with another device file.
[ 800.945] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 800.945] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 800.945] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 800.945] (**) AT Translated Set 2 keyboard: always reports core events
[ 800.945] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 800.945] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 800.945] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 800.945] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 800.945] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 800.945] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 800.945] (**) Option "xkb_rules" "evdev"
[ 800.945] (**) Option "xkb_model" "pc104"
[ 800.945] (**) Option "xkb_layout" "us"
[ 800.945] (II) config/udev: Adding input device PC Speaker (/dev/input/event1)
[ 800.945] (II) No input driver specified, ignoring this device.
[ 800.945] (II) This device may have been added with another device file.
[ 805.999] (II) NVIDIA(GPU-0): Display (BenQ GL940 (DFP-0)) does not support NVIDIA 3D Vision
[ 805.999] (II) NVIDIA(GPU-0): stereo.
Running latest NVIDIA drivers (GTS 250).
Last edited by Swiftie (2014-02-24 17:28:19)

I discovered problem. It's caused by NetworkManager after last update (libsystemd.0.so trouble).
Recompile pkg by yourself to get working NetworkManager.
Last edited by Swiftie (2014-02-24 17:28:01)

Windows 7 won't load properly / possible HDD failure?

Well I will start off by saying I've been having problems with this since I've bought it. It used to be under warranty and I had to ship it back twice, and I've had to do countless system recoveries but this time I'm at a loss. My current problem started about 4 days ago. I had skype downloaded, and my skype started freezing randomly, but only for 30 seconds to a minute, and then come right back to working. Then this started happening more frequently, and then it got to the point to where it wasn't just skype that would freeze, it was my computer. It must have only been explorer.exe that was freezing or something because my mouse still moved, and if I was in a skype call the skype call would work but I couldnt type or click on skype without it saying that it wasn't responding. Then yesterday that problem upgraded again to nothing working very well. My computer (again I can only assume it was explorer or something) would start up normally, and then once I got to my desktop the load light would come on my tower and freeze / slow down anything and everything. Example was I had VLC media player open watching a show and the video would freeze for 2 to 5 minutes, play for 10 seconds, then freeze again. Beforehand it was only slight lock ups, but then it became full blown lockups. Once that load light came on it stayed on and never wavered and I would be forced to restart my computer to even give it a chance to run properly for a few minutes before this same problem would occur. Yesterday however the problem upgraded once again, and my computer wouldn't even let me get to my desktop normally. I was able to load into safemode with networking to try some solutions but nothing worked. Then the hangup issue started occuring in safe mode as well, forcing me to restart again. This is where it just keeps getting worse sadly. My computer would get to the "Starting Windows" screen, sit there for a couple minutes, then maybe 1 out of 10 attempts it would get to the "Welcome" screen as if it was trying to load my desktop but never would load it, and on the other 9 attempts I didn't make it to the "Welcome" screen it just sat a black screen with the load light going and it would never do anything. My mouse has never been frozen at any point so it's not a full on freeze situation, but something isn't right. I did a sytem recovery last night, put it back once again to factory settings and it still locked up a little but nothing compared to how it had been. I turned my pc off and went to sleep, and then this morning it did the usual not getting past the "starting windows" screen. Sometimes it wouldn't even recognize my hard drive, giving me the old "insert media and boot from disc" or "No media found", I also got two errors, PXE-E61: Media test failure, check cable, and the other message was PXE-MOF: Exiting PXE ROM. Then after receiving those messages my computer would restart and give me the choice to hit a button to load from disk. Throught the course of this problem I tried startup repairs, smart tests, anti viruses, nothing did anything to help. So I decided once again it was going to be time for a system recovery, but now when I hit f11 to go into the system recovery options, all of it is blacked out. I can't even click on system recovery anymore. So at this point Windows 7 won't load at all, not even in safe mode, and I'm lucky to even be given the OPTION to start it in safe mode. Half of the time it seems my computer doesnt even recognize my harddrive, and I can't even do a system recovery or repair tools, but the repair tools didn't really do anything anyway. So I have no way to use that computer, and Im thinking it might be HDD failure but I'm not hearing any noises coming from it and my computer has always been a little slow so it's not like things have slowed down by a lot so I'm not so sure its my HDD but I have no idea what to do or where to start since I've exhausted all my of resources on trying to fix this issue myself. I know this problem is probably way too vague to try to get an accurate idea of what is wrong, but I will check back now and then and answer any questions to the best of my ability (I'm not tech savy so if you need really fancy PC information you wil most likely need to tell me how to acquire said information). I mean I guess if I have to I will get a new HDD, but that means I will most likely need to get a new OS, and I love windows 7 with all my heart and I don't want to upgrade at windows 8. I feel like it's my OS but it could very well be anything at this point.

Hi @rhhox ,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post ( serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
Regards,
George
I work for HP

Certain web sites won't load on any browser on Macbook Pro

Starting yesterday certain web sites won't load on any browser (Safari or Chrome). These include sites like the New England Journal of Medicine, Washington Post, and English Bulldog News. I get an error message in Safari that the server took too long to respond and in Chrome I get a connection timeout error message. I updated Adobe Flash with a clean install as I was unable to update using the standard method due to connection timeout. That restored my access to YouTube video but today it takes ~2 minutes to load a YT video. Web sites are loading fine on my phone and household PCs.
Not sure if it is notable that my internet loading capacity has been very slow for some time. I worked with the internet company to increase the network speed but my computer has not seen benefit. No problems on the PCs in our house but my Macbook very frequently gets partially "kicked-off" the network as indicated by yellow lights seen next to the "internet" and "server" items in my Network Diagnostics utility.
I looked at old threads and ran EtreCheck (see results copied below) as was recommended to another user several months ago, but would appreciate any thoughts about where to go from here. Could it be malware? Or just a classic case of operator error? Here are the EtreCheck "red" items extracted from the full report below:
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
Internet Plug-ins: ℹ️
Flash Player: Version: 16.0.0.235 - SDK 10.6 Cannot contact Adobe
FULL RESULTS:
EtreCheck version: 2.1.4 (107)
Report generated December 17, 2014 12:02:37 PM CST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
8 GB RAM
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
Mac OS X 10.7.5 (11G63b) - Uptime: 12:26:55
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 499.25 GB (261.25 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple, Inc. MacBook Pro
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[failed] com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist [Details]
[loaded] com.citrixonline.GoToMeeting.G2MUpdate.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
[running] com.spotify.webhelper.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Music Manager UNKNOWNHidden (missing value)
Speech Startup Application (/System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogn ition.framework/Versions/A/Speech Startup.app)
Dropbox Application (/Applications/Dropbox.app)
Music Manager ApplicationHidden (/Users/[redacted]/Library/PreferencePanes/MusicManager.prefPane/Contents/Helpe rs/MusicManagerHelper.app)
Spotify Application (/Applications/Spotify.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 2.4.4.2 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.1
Flash Player: Version: 16.0.0.235 - SDK 10.6 Cannot contact Adobe
AdobePDFViewer: Version: 10.1.4 [Support]
SharePointBrowserPlugin: Version: 14.3.2 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 09 Check version
User internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Flip4Mac WMV [Support]
Java [Support]
MusicManager [Support]
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      18% Google Chrome
      8% WindowServer
      2% SpeechRecognitionServer
      2% coreaudiod
      2% hidd
Top Processes by Memory: ℹ️
232 MB Google Chrome
189 MB System Preferences
129 MB Spotify
86 MB Spotify Helper
77 MB WindowServer
Virtual Memory Information: ℹ️
952 MB Free RAM
4.99 GB Active RAM
1.52 GB Inactive RAM
1.13 GB Wired RAM
1.02 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 16, 2014, 11:36:19 PM Self test - passed

Update: I ran Console upon trying to load a web site that won't load. Here are the messages from that action with any identical messages deleted:
12/17/14 1:45:51.013 PM [0x0-0x1b01b].com.google.Chrome: [201:2311:1217/134551:ERROR:location_bar_view_mac.mm(602)] Not implemented reached in virtual void LocationBarViewMac::EndOriginChipAnimations(bool)
12/17/14 1:45:51.000 PM kernel: Google Chrome He (map: 0xffffff8014ab4138) triggered DYLD shared region unnest for map: 0xffffff8014ab4138, region 0x7fff8a200000->0x7fff8a400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
12/17/14 1:46:16.515 PM [0x0-0x1b01b].com.google.Chrome: [604,1956432224:13:46:16.514831] Native Client module will be loaded at base address 0x00006a1600000000
12/17/14 1:46:16.000 PM kernel: Data/Stack execution not permitted: Google Chrome He[pid 604] at virtual address 0x107509000, protections were read-write
I forgot to note I have also done the obvious things like computer restart, shut down, and modem reset.

I've swapped to i5c so my hubby has my i4s with pay as u go but now it won't load or sent e-mails! I've tried tech support suggested by Talkmobile for 'fix' but it hasn't solved problem,any ideas?..

I've swapped to i5c (great phone) so my hubby has my i4s with pay as u go but now it won't load or sent e-mails! I've tried tech support suggested by Talkmobile for 'fix' but it hasn't solved problem,any ideas?..

Try this from MacFixIt as well:
In the case of drive directory damage or problems with permissions, the solution is usually to use Apple's Disk Utility to repair the disk. Of course, you won't be able to perform this operation normally (simply launching the Disk Utility application, located in Applications/Utilities, and initiating a disk repair) if your system will not startup. So two options exist:
* Insert your Mac OS X 10.4.x (Tiger) media (DVD or CD) and restart the computer while holding down the "C" key. Once the computer has booted from the installation disc, select "Utilities" from the menubar and open Disk Utility. Repair the disk, then quit Disk Utility and restart your system.
* Alternatively, you can repair the disk while booted in single user mode if you do not have access to a retail Mac OS X 10.4.x (Tiger) DVD/CD. To startup in single user mode, hold down the "Command" and "S" keys simultaneously at startup. Once properly booted, type the command fsck at the prompt. Repeat these process until no errors appear.

.swf won't load remotely...please help

Ok, so I have been working with the FlipBook dreamweaver extension and once I upload to my server
the .swf file won't load. However, everything works like a charm when tested locally. All corresponding
xml and js files are in place and the code looks fine. I've had this issue once before, and after much time spent on Google it
seemed there could be a problem with how the swf is being uploaded. I finally got it to work via uploading
through the web based control panel. Unfortunately, we switched hosts and can only upload via FTP now.
So I'm stuck again..any ideas how to remedy this situation? Thanks. -Bryan
URL: http://www.franklinshopper.com/everyday_heroes/

MAke sure you have all the supporting files loaded to the srver. Also, the flashvars line(s) in your embedding code that appear to have some stray "&"s in them that probably needs to be a real "&"s
<param name="flashvars" value="movie=FlipBook.swf&flashvars=configSource=config.xml&source=book.xml&swfversion=9 .0.45.0" />

Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP

I have devices loaded but new devices keep getting this error "Authentication failed on device 3 times. Failed to detect SSH version running on the device. PRIMARY-STARTUP config Fetch Operation failed for TFTP" - which trying to get configurations. I am using LMS 3.0.1
I tried to TELNET on devices via Putty port 22 no good. Please help?
Name Version License Status Size CiscoWorks Common Services 3.1.1 Licensed Not applicable Campus Manager 5.0.3 Purchased 1500 CiscoView 6.1.7 Licensed Not applicable CiscoWorks Assistant 1.0.1 Licensed Not applicable Device Fault Manager 3.0.3 Purchased 1500 Internetwork Performance Monitor 4.0.1 Purchased 1500 Integration Utility 1.7.1 Licensed Not applicable LMS Portal 1.0.1 Licensed Not applicable Resource Manager Essentials 4.1.1 Purchased 1500

Showing 1-1 of 1 records
Go to page:
of 1 pages
Device Name
SysObjectID
Model
Device Status
Inventory Status
Inventory Last Updated Time
Config Status
Config Last Updated Time
1.
R2020012_01
.1.3.6.1.4.1.9.1.576
Cisco 2811 Integrated Services Router
Normal
Success
Jan 13 2011 10:43:49 EST
Failed
Jan 13 2011 10:37:24 EST
Rows per page:
20 50 100 500
Go to page:
of 1 pages

Won't load startup config

Similar Messages

Maybe you are looking for