Work Center Creator List

Hi Experts,
How to find out Work Center Creator's list by std SAP Transaction (one by one or in mass)
Regards,
VNG

Dear VNG,
Check the table CRHD to find the log details,in case in OP40 if for the work center category the check box is included for
change document means then check this report CR10.
Check and revert back.
Regards
Mangalraj.S

Similar Messages

  • Work center-Machine wise report

    Hi Guys,
    I have a work center for ex CNC in which i have taken 3 machines,in capacities i define the individual capacity for each machine & iam also able to split the capacity amoung the machines,Now if i want to take a report to give to the work center supervisor -list of the operations that i have loaded in the work center,<b>is there any standard report available where i can even get the detail of the load in the machines of particular work center?</b> otherwise pls give me some workaround

    Hi vijay,
    what u need is, day or weekly wise  prodution load for each machine .. am i correct?
    u need a report containing details about  what are all materials to be produced and its all operations for  each machine.
    In that case  u have to develop some customized Zreport.
    regards
    pradeep

  • How to get a list of production orders for a work center?

    Hello SDN Community, 
    I have an requirement to display in a pop-up window a list of production orders for a work center.
    Does anyone know which screens/transactions would show this relationship?
    Or better yet, does anyone know how to demonstrate this from the tables themselves?
    Thank you,
    Dean Atteberry.

    Hello Mangalraj.S
    >>Goto COOIS-->For the field List select PPIOO000 - operations and layout -->standard layout
    >>and execute,by this you will be able to see the operations for each order and to which
    >>work center they are assigned.
    The system I am working on is ECC 6.0.
    For this system the values in the dropdown for the "List" field are "Capacities, Items, Order Headers, Sequences, Trigger Points, etc".  But nothing that says PPIOO000 - operations and layout.
    >>Or else in the in input screen of COOIS,enter the work center for which you want to see which
    >>are the production order's assigned and execute.
    For system I am working in, I do get a grid display when entering a work center.  It has columns like "Order, Material, Icon, Order Type, MRP cntrlr, etc."   But no column with Work Center.
    Any further insight into how to use this transaction to display a list of production orders for a work center would be greatly appreciated.
    Thank you,
    Dean Atteberry.

  • FM for List of Work Center.

    Dear Friends,
    I am looking for the functional module which give me list of work center ;
    Like Customer will provide the product requirement and depend upon product specification i should get the specific work center where the product will manufacture.
    Regards

    Check with Below FM's :
    CR_WORKSTATION_READ
    CR_WORKSTATION_CHECK
    Search in SE37 like CRWORK and thereis no BAPI
    Table name is CRHD
    Thanks
    Seshu

  • Buyer Work Center - Group by Choice List Needed to Requistion

    Hi Guru's,
    In R12.1.3 Application - Purchasing Super User
    I am looking for personalization of self service page in PO Buyer work center for Requisition update.
    I wanted choice list/LOV Group by in Request header of Requisition self service page to be defaulted to "Requisition" instead "Default".
    I didn't find option in self service personalization of this page. Can some body help me in this how to default it to requisition.
    Thanks in advance...
    Edited by: user8822881 on Sep 24, 2012 6:22 AM

    Hi,
    You need to do it by profile option setup.
    Setup the profile option "PO: Default Requisition Grouping" to "Requisition" at the site level.
    You have two options - "Default" and "Requisition".
    Thanks,
    PS.

  • Capacity list from work center

    Hi all,
    there's some BAPI or MF to retrieve a capacity's list from work center ?
    tks,
    bye

    Dear,
    CRHD-wc header table  and CRCA- assignment of capacity to WC.
    From CRHD - pass WC name to CRHD and get the object ID
    Pass this Object ID to CRCA to get the capcity in WC.

  • Maintaining work center list in Capacity Planning: Selection List in CM01

    Hi,
    Where can find the config route in SPRO for maintain work center into the Capacity Planning: Selection List in CM01?
    Thanks a lot!
    Min

    Mandy,
    Couple of combinations you should check,
    1. First try to identify "Selection Profile" which is used. In "CM01" go to menu Planning->Profiles->Selection Profile.
    2.Check the defination of this profile using transaction "OPA2". Here you need to look for "Work center Set" which is assigned.
    3. Now look at the defination of the workcenter set using transaction "CMS3", here is were we define as how the list is to be fetched.
    Hope this helps....Reward your points and close the thread if so,
    Regards,
    Prasobh

  • Qm task list- work center

    Hi, while creating the task list, thw ork center we mention, is it the production work center? let us say at prod work center X is used to manufacture at operation 10, we need only micrometer to check the dimensions of at that opeartion, do we need to mention micrometer as quality work center? pls brief.

    Hi
    As you know the work center is maintained at the operation level of the task list.
    First understand the significance of work center.
    Generally Work center are related to routing where multiple operations are there & multiple stations of work are there.
    In the work center we maintain the Capcity of Man or M/C.Scheduling parameter & costing etc.
    These are generally centers where production work takes place.for a perticular station while confirmation of Production order we can calculate the Number of m/c hr & man hs for a perticular job.
    But in Quality we do not have such stations in the task list.
    We can miantiain this only for information purpose like QREC  QFINAL QINPR etc.
    where as   micrometer etc are the PRTs and can not be work centers
    I hope this is clear to you.
    Regards
    Sujit

  • SAP Code to Return Production Order List for a Given Work Center

    We are looking for native SAP code (BAPI, BADI, FM, ...) that would take a work center value as a parameter and then return all the production orders that have been assigned to that work center.
    We are running 4.7 and do not have access to BAPI's BAPI_PRODORD_GET_LIST or BAPI_PRODORD_GET_DETAIL.
    I believe we could write our own BAPI for this but was hoping that SAP had something natively embedded that we just can't find at this point.
    Thanks in advance for any information you might share!!!
    Chad

    Thanks, Srini
    This was very helpful.
    We're looking for an SAP object that we can interface into xMII.  So the logic in this report is useful but a BAPI, BADI, or RFC would be ideal.
    Thanks again,
    Chad

  • Work Center

    Hello Guru,
    I have some question about the work center when pick up by the creation of production order. When we create production order manually via CO01, SAP pick workcenter BSBA111 for this order. And when we convert a planned order to a production order SAP pick work center CAWORK01. same finished product is been consider with this material number 1111002 in plant 0012. why in different way of creating production order, but the system is been picking two different work center with different formula? please explain deeply for my concern.
    Thanks

    In this case what is happening is that while creating manual Production order you are manually selecting the production version . therefore the routing assigned to that particular production version gets copied & subsequently the work centre assigned to th routing gets copied along with that.
    Since you have used selection methood as 3 (selection only by production version) the system searches for the valid production version starting from the 1st production version in your list of production versions & stops as soon as it finds the valid one & selects it.(I.e. the 1st version which is valid for the date of exposion & within the lot size defined)
    Now in this case the one which you selected & the one which the system finds during MRP can differ.
    Thats why your work centres differ , because the production versions differ.
    Therefore If you want the selection to be same in Manual PO & PO by MRP , in OPL8, for your plant & order type , select indicator 0 for Production version i.e. automatic selection of production version.

  • Want to remove Technical data Tab from Work Center

    Hi All,
    I want to remove Technical data Tab from Work Center. I have Removed ''Technical data'' Tab from Plant Maintenance and Customer Service-->Master Data in Plant Maintenance and Customer Service -->Maintenance Plans, Work Centers, Task Lists and PRTs >Work Centers>Configure Screen Sequence for Work Center.
    Still I am able to see Technical Data Tab in IR01, Work center.
    Is there any other config to remove the same?

    This is resolved.
    I have changed the config in following node as 0005 for PM
    SPRO / IMG -> Plant Maintenance and Customer Service -> Master Data in Plant Maintenance and Customer Service -> Maintenance Plans, Work Centers, Task Lists and PRTs -> Work Centers->General Data->Define Work Center Types and Link to Task List Application

  • Work center in solution manager

    Hi,
    In the work center of solution manager, while trying to create job documentation : [https://websmp107.sap-ag.de/~sapidb/011000358700001975992008E/index.htm] from a change request the final step is to assign a logical component. When I click on the logical component icon my logical component list doesn't show up even though its maintained in the system. Is there some configuration involved?
    Thanks,
    Esha

    Hello Esha,
    if I understood your issue correctly your creating the Job Documentation from the Job Change Document (transaction type SDCD) -> you are using the ChaRM integration, right?
    In that case you'll have to check IBase assigned to the Job and Change Request: The IBase has to point to a production system.
    The program also filters for logical components having the (logical) System, i.e. combination of System ID and Client, of the assigned IBase, assigned in the role production.
    -> So you need a logical component which includes the selected system (see IBase) in role production.
    Regards,
    Martin
    Please follow us on SDN:
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/u/25168834 [original link is broken] [original link is broken]
    /people/martin.lauer/blog
    and SAP Service Marketplace:
    http://service.sap.com/jsm

  • Employee Responsible for a work center

    Good Morning,
    We use Project Systems in order to do project management within SAP.  We use the work center to define the team structure.  I know that there is a place to maintain the person responsible for a work center in the config, but the entry here is a text field.  We are trying to link the owner of a workcenter back to the reporting structure that can be pulled from HRP1001, and a text field makes it more difficult to track this back to the HR side.  We currently enter the name of a manager in this field, and if there is no other place to define the person responsible using a pernr, we'll have to start using this field to enter personnel number.  This will allow ABAP to pull the pernr and trace it to a position number on HRP1001.  I'd like to keep the manager name in this field if at all possible though.  Any help will be much appreciated.  Thanks in advance.

    HI,
    Create a Cost center using T code - KS01.
    Create an activity type using T code - KL01.
    Assign the Rates for an activity type & cost center combination using T code KP26.
    In the input screen of T code KP26 ,enter version as 0, from period 1 and to period as 12 and the Fiscal
    Year as 2009,enter the cost center, activity type click on overview screen (F5) & enter the per hour Rate
    After performing this in work center assign activity type & cost center
    should be assigned. Then while creating routing/task list this work center can assigned for performing
    as per the operation time, whichu2019s used by the work center, the cost is getting calculated.
    Overhead cost is the indirect cost which's spent during production.
    So when the cost rollup is taken using T code CK40N (or else using CK11N estimating & CK24 for
    Hope You will get some idea
    Thanks and regards
    E.Rambabu

  • Function Module to get a work center's capacity requirements (load) within a given period

    Hi all experts,
    Currently I’m doing a capacity summary report similar to CM01, but with a summarized capacity availability and loading for a period.
    Selection Parameters: Work center range from and to, Period from and to
    List Format: Work Center, Avail Capacity, Loaded Capacity, Free Capacity, Load %
    I have found a standard function module (FM) to get work center's available capacity for a period, but still facing the challenge to find a FM to get a work center’s capacity requirements (load) in a period.
    I have read through all the related threads from the web, and tested the recommended FMs, but still cannot get a right result.
    Please help to provide some leads for a FM or the logic.
    Best Regards
    Philip

    Hello Philip
    The following function modules should be useful:
       - CY_PRIMARY_SELECTION            - Function module for selection of orders for the work center
       - CY_SECONDARY_SELECTION          - Check for additional criteria
       - CR_CAPACITY_AVAILABLE_PERIODS   - Reads the available capacity from work center
       - HR_PERSON_READ_TIME_INFO        - Reads the available capacity from person (modification)
       - CY_GET_PART_CAPACITY            - used only for the first period to read backlog
       - CY_LOAD_DISTRIBUTION            - Distribution key
    Please observe that these are simple function modules, not BAPIs, That means, they were developed to be used on the SAP internal programs and they are not supported by SAP when used in custom programs.
    BR
    Caetano

  • HRMS Button not appearing in Work Center

    Hi friend,
    As we have HR module here, we have a requirement of maintaining the Personal number and work center link.
    But in the Transaction code IR01,02,03 HRMS button is not appearing.
    Whether any setting missing especially from HR side anything missing?
    Pls guide me on this.
    Regards,
    krishna

    Hi
    check the config in OIZU transaction, make sure that screen sequence for HR assignment is maintained
    Mneu path:
    PM>>Maintenance Plans, Work Centers, Task Lists and PRTs>Work Centers>Configure Screen Sequence for Work Center
    Regards
    Seenu

Maybe you are looking for