Work environment

Hi,
I have mostly been working in USA and Singapore, and only recently took a full time job in India.
These are the things I did not like:
Have to work 2 to 3 Saturdays a month.
Lunch break is only 30 minutes.
I have to become confirmed, until then, notice period is only one day.
Pressure from management to attend company picnic on Sunday.
Provide no training on the software (SAP) that I am working with.
Employees stand up whenever management visits.
Is this typical of Indian companies?
I am optimistic about India's economy, but I am disappointed by management lack of respect for employees.
I have only been with this company 4 months, and am wondering if I should look for another job in India. Perhaps I should stay and get experience with SAP before trying to go abroad.
Any suggestions?
Al Lal

Hello Abhinav,
I have been working in India for more than 3 years, and what you say is 'news' to me.
Sounds like you have joined an 'enduser' company.
Have to work 2 to 3 Saturdays a month.
--> It depends what you agreed for? Did you join a company which works 24/7. You should get 'compoff' for all non-working days that you work.
Lunch break is only 30 minutes.
--> I never came across such restriction before.
I have to become confirmed, until then, notice period is only one day.
--> it's a one month period.
Pressure from management to attend company picnic on Sunday.
--> What is the use of a picnic, if there is 'Pressure'. hee hee
Provide no training on the software (SAP) that I am working with.
--> I have been sent overseas just for SAP training.
Employees stand up whenever management visits
--> It's not mandatory.
Regards,
Ammey Kesarkar

Similar Messages

How to make all users have the same working environment?

Hi guys,
thanks for helping out on this issue.
Is there a way to set all users on your system to have the same working environment? I believe, as root you can edit the /etc/profile. But when I looked at the file, I was confused. I had no idea where to add stuff because it was a script.
Please if anyone can help me explain how to customize system wide working environments, I will be very grateful .
Thank you
Arrey

Hi.
It's not clear what you understand under system wide working environments ?
/etc/profile it's one possible solution.
Another way - put custimozed .profile to all users and use customezed */etc/skel* for new users.
Regards.

Work Environment in SAP R/3 system

In real time work environment, what are all the SAP R/3 landscape exists, please explain about them.
Thankyou for your time in giving the answers.
Bhaskar.

hi,
Three System Landscape consists of a development system DEV, a quality assurance system QAS and a production system PRD. The development system contains the Customizing client CUST, the quality assurance system contains the quality assurance client QTST and the production system contains the production client PROD.
The system landscape contains all the SAP Systems that you have installed. It can consist of several system groups, whose SAP Systems are linked by transport routes.
After you decide which clients you need and which roles you want them to have, you need to decide how to distribute them amongst the different SAP Systems. You can set up multiple clients independently of one another in a single SAP System. However, when you configure the data, you must remember that cross-client Customizing settings and Repository objects are identical for all clients in a single SAP System. Changes made in one client apply immediately to all clients in the system.
For more information check this link
http://help.sap.com/saphelp_nw04/helpdata/en/63/a30a4ac00811d2851c0000e8a57770/content.htm
Regards,
GUDURI

Paste phone n° out of email in work environment to the phone dialing pad is not possible

Hello,
I am trying to paste a phone number out of an email in my work environment to the dialing pad of the phone.
When I do that, I receive the error message that I am not allowed to paste work content into a personal application, although I am in the work environment and I have also opened the phone in the work environment.
When the email recognized the phone number "automatically," I am able to call that number.
I am using a Z30 with the software release 10.2.1.2102.
Thank you.
Regards.

Hmmm go back and sign out and turn off iMessage then after that reset all settings, its not going to delete anything off the phone. After reset all settings. Go back turn imessages on and sign back in.

Adjusting work environment with oracle developer 6.0 running on SCO-UNIX

i've been working on UNIX-WARE 7.1 OS. and i've got some difficulties to adjust work environment, especially with developer. Sometimes, it is crashed during compile, is there anyone having idea to solve my problem. thanks.

I am having the same exact problems, except I'm attempting to put the two on windows 98. I'm a student at California State Univeristy of Sacramento, and this problem does not seem to be rare. If anyone, such as a Oracle employee scanning over this discussion, could explain how to install this combination, and remove it, please help!!!
The teacher suggested installing developer in one home, and oracle in another home. I have yet to try this since I am having problems deleting Oracle off of my computer.
Please help
[email protected]

Home vs. Work Environment; Can't connect @ Home

I have a work environment where:
Tomcat 5.0.24 running on Win2K Workstation, Computer Name NJEP11
SQL Server 2000 running on Win2K Server, Computer Name DATABASE
I have a home environment where
Tomcat 5.0.24 (exact copy, file for file) running on WinXP Home, Computer Name DATABASE
SQL Server 2000 running on WinXP Home, Computer Name DATABASE (same machine). Identical setup as work with regards to login accounts, databases, tables, etc.
When I deploy my app at home, it can't create a connection pool. I receive the following exception:
org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Network error IOException: Connection refused: connect)
     at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:855)
     at org.apache.commons.dbcp.BasicDataSource.getConnection(BasicDataSource.java:540)
     at com.lamatek.dataconnection.ConnectionFactory.getPooledConnection(ConnectionFactory.java:41)
     at com.lamatek.basetags.BaseDBTag.getConnection(BaseDBTag.java:119)
     at com.lamatek.login.LoginVerifyTag.doEndTag(LoginVerifyTag.java:43)
     at org.apache.jsp.webapps.reps.index_jsp._jspx_meth_login_loginverify_0(index_jsp.java:143)
     at org.apache.jsp.webapps.reps.index_jsp._jspService(index_jsp.java:63)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
     at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
     at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
     at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
     at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
     at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.sql.SQLException: Network error IOException: Connection refused: connect
     at net.sourceforge.jtds.jdbc.ConnectionJDBC2.<init>(ConnectionJDBC2.java:372)
     at net.sourceforge.jtds.jdbc.ConnectionJDBC3.<init>(ConnectionJDBC3.java:50)
     at net.sourceforge.jtds.jdbc.Driver.connect(Driver.java:183)
     at org.apache.commons.dbcp.DriverConnectionFactory.createConnection(DriverConnectionFactory.java:37)
     at org.apache.commons.dbcp.PoolableConnectionFactory.makeObject(PoolableConnectionFactory.java:290)
     at org.apache.commons.dbcp.BasicDataSource.validateConnectionFactory(BasicDataSource.java:877)
     at org.apache.commons.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:851)
     ... 36 more
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:364)
     at java.net.Socket.connect(Socket.java:505)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:582)
     at net.sourceforge.jtds.jdbc.SharedSocket.<init>(SharedSocket.java:274)
     at net.sourceforge.jtds.jdbc.ConnectionJDBC2.<init>(ConnectionJDBC2.java:301)
     ... 42 moreIs this some limitation on XP Home? My Enterprise Manager looks exactly the same, as though I have the servername and computer name and login accounts correct (I can connect using Query Analyzer and Enterprise Manager using the same username and password as at work, and the server registration name shows up correctly as DATABASE).
Any hints?

This must be an XP Home Edition thing. I ran a port scanner and there's nothing listening on port 1433, even through SQL Server is running and I can connect through Query Analyzer, etc.
Anyone else have any specific input/experience?

Work Environment in ESS

Hi Experts,
I need to configure Work Environment in ESS . When i check standard Application it is showing empty screen(Equipment monitor). Please provide me any document, Whcich guides step by step configuration.
regards,
Sree.

You need to create one active implementation of one Badi yes. They recommend to re-use the sample coding.
You need to do this:
Prerequisites
●      A technical prerequisite of this application is SAP ECC 5.00 Financials Extension.
●      In the Customizing of Employee Self-Service (mySAP ERP) under Specify RFC Connection to the HCM System you have defined the RFC destination for the selection of the personnel data.
●      You have created and activated an implementation of BAdI FCOM_EQM_EQUI_USER for finding equipment for users and users for equipment. You are recommended to adopt the sample coding.
●      Users have the authorization to display the objects (asset, equipment and object on loan).

All the time slips in the working environment, how to fix this error?

All the time slips in the working environment, how to fix this error?

All the time slips in the working environment, how to fix this error?

Settings of the current work environment desincronizará the replacement and the original item

This problem occurs when processing my composition, I asked to define the first frame of the composition as the start of the work environment but do not know how .. who helps me please

a.) Move your playhead to the beginning of the work area and press the B key to set the beginning of your work area.
b.) Move your playhead to the end of the work area and press the N key to set the end of your work area.

Work environment disappeared?

Hi. Am using pp cs5 on mac pro - all working fine until this morning when the whole work environment (source clip preview, timeline, media browser - the lot) disappeared off screen and i cant retrieve it. Its all loading up fine as far as i can tell, the menu at the top is there...when i open a dialogue box its just on the edge of the screen so i can see it. Any ideas folks??

Welcome to the forum.
First thing that I would do is to Reset the Workspace (Window>Workspace), and choose either a custom, if you created one, or one of the defaults, that installs with PrPro.
Good luck,
Hunt

IMovie like working environment

Is it possible to convert the FCP like the photogenic working environment on the iMovie?
I find iMovie just more pleasant on eyes and the workflow.

But you can let Apple know that you'd like them to modernize their GUI
http://www.apple.com/feedback/finalcutpro.html
I think if they at least updated the browser to include a more elegant and manageable clip view it would make things more efficient and pleasant.
Can't hurt to ask.
best,
g

Collaborative work environment with JAVA Applet

Helo all, how can I use JAVA Applets to establish a collaborative work environment?
If anyone knows some resources that can help me, I'll be greatfull for him/her.

Java 2D provides the class java.awt.image.ConvolveOp that can be used to blur. This tutorial provides an example and code. Select "Convolve: Low Pass" display of the picture of the building to see the effect.
[http://java.sun.com/docs/books/tutorial/2d/images/drawimage.html]

Facing Issue while Installing SOA server for setting up BPM11g working environment

Hi All,
I have been able to install Database and Weblogic Server but I am facing issue in installing SOA server.
I am trying to install it for running BPM 11g application.
I saw the same problem has already been answered but available solutions are not resolving my problem.
Error Message:Provide the JDK/JRE location while launching the installer.Invoke the setup.exe with -jreLoc<JDK/JRE location absolute path>parameter(s).
I tried both way for initializing the installation. i.e directly through setup.exe and by command prompt but in both the cases I am getting same error.
It is not asking for Java path in command prompt also.
a)In my system java 7 is installed.
b)I have used Oracle Database 11g instead of XE
Can this be the reason?
I checked Program Files:
jre7 and jdk1.7.0_45 are there.
I also have set JAVA_HOME in environment variable as C:\Program Files\java\jre7
path :C:\Program Files\java\jdk1.7.0_45\bin
Please help me in fixing this as I am stuck in this installation from last few days.
Thanks!

Hi Binay,
You might want to consider instead installing it using JDK 1.6.
Here's where you can check the Fusion Middleware configurations: http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
It's buried in there, but bottom line is that Oracle BPM 11g (PS6) 11.1.1.7 needs JDK 1.6 (for Windows it is either JDK 1.6.0_35 or JRockit 6 Update 37 R28.2.5+) and I'd suggest you use JRockit.
Dan

Work Environment To Boot Caseless Comp?

hey folks!
i'm building my first opteron system (KT8 Master 2 FAR). i have all the parts already except for the processors themselves, the power supply, the cd rom drive, and a few misc. cables.
i don't have a case at this point in time. i plan on building my own, and i don't mean modifying off the shelf parts.
that's my most specific question:
how can i test the unit to make sure it boots and runs, etc, before i build the case? it can't be safe to plug in all the components and turn on the juice while the things are sitting there on a counter or table? it's going to be a while before the case is done. what sort of environment would i need to boot outside the box without shorting out the computer or my own nervous system?
thanks!

i had to run my a64 system caseless for a while and managed no probs. i put the mobo on the anti static bag it came in, on top of the box it came in. The mobo box raised the mobo enough so the agp/pci cards didn't cause the board to tilt at an angle.
Make sure the fans don't have any cables near them, it's easy to mis-route stuff and get a wire caught in the blades. Also, since there is no case, there is nothing to screw the pci cards into, i found they were able to move about quite a bit which isn't good for the cards or board. Plus if they're not seated properly you could get stability probs. My TV card experienced some interference issues without a case but that's not too big a problem.
Provided you take care, running caseless should not pose any probs.

Work Environment - Equipment Overview: language issue

Hello,
Im having a little issue with the Equipment Overview iview.
I've the portal in Portuguese language, but the Equipment Overview iview appears in Spanish.
I want to know how to change the language of this iview.
Thanks in advance.
Best regards,
Hugo

Hi,
If your homepage framework is working for German language then check if your setting are properly maintain for Area Group Key SAPDEFAULTESS_ERP2005 in Portugese. spanish.
Solution:Login to system in each language i.e FR, TR, PT
navigate to SPRO>FA>TM>ESS>Homepage FR> select Header & Area Group Pages>
Select Define Area Group Pages > Add Entries> Select the SAPDEFAULTESS_ERP2005 Key check weather the Area Group
Role Text is maintain for FR TR PT if not maintain the translation your problem will be resolved.
u can set language at various levels.
com/saphelp_nw04/helpdata/en/49/e607426338da6fe10000000a1550b0/
frameset.htm
Please have a look at the Note 947081,
the hierarchy of what locale a component will be shown in the portal,
will be :
1)component- if he have a locale define
2) portal mandatory locale -( that's what we suggest)
3)user locale
4)browser locale
5)Portal default locale
6) system locale

Work environment

Similar Messages

Maybe you are looking for