Work Management Service: No tasks are shown on MySite

The work-management-service is not working.
On "MySite" the task-list is always empty (Pic.1), but there are tasks referenced to the profile.
I do not get errors in the ULS or on the task-page (refresh is OK).
Tasks are crawled and search works fine:
Are there any other settings i am not aware of ?

Increased the logging levels:
System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)), StackTrace:
at Microsoft.SharePoint.SPWeb.GetListFromWebPartPageUrl(String pageUrl)
at Microsoft.Office.Server.WorkManagement.ProviderOM.SharePointTaskAggregationUtilities.TaskCollector`3.<>c__DisplayClass56.<TryExecuteActionWithListLoaded>b__53(SPWeb web)
at Microsoft.Office.Server.WorkManagement.ProviderOM.SharePointTaskAggregationUtilities.TaskCollector`3.TryExecuteActionWithListLoaded(Func`1 fnGetCreateSite, Func`2 fnCreateWeb, Func`2 fnGetList, Func`1 fnGetListId, Action`3 toExecute)
at Microsoft.Office.Server.WorkManagement.ProviderOM.SharePointTaskAggregationUtilities.TaskCollector`3.TryExecuteActionWithListLoaded(Uri rootFolderUri, Action`3 toExecute)
at Microsoft.Office.Server.WorkManagement.ProviderOM.SharePointTaskAggregationUtilities.TaskCollector`3.FindNewTasksFromSearch()
at Microsoft.Office.Server.WorkManagement.ProviderOM.SharePointTaskAggregationUtilities.TaskCollector`3.CollectAndSyncTasks()
at Microsoft.Office.Server.WorkManagement.Internal.TaskAggregator.FarmRefreshJob.RefreshProvider(Nullable`1 lastSync, String providerKey, IWmaTaskProvider provider)
at Microsoft.Office.Server.WorkManagement.Internal.TaskAggregator.FarmRefreshJob.AggregateProviders()
at Microsoft.Office.Server.WorkManagement.Internal.TaskAggregator.FarmRefreshJob.ExecuteCore()
at Microsoft.Office.Server.WorkManagement.Internal.TaskAggregator.FarmRefreshJob.ExecuteAndDispose()
at Microsoft.Office.Server.WorkManagement.Internal.WmaContextUtils.<>c__DisplayClass1.<ExecuteCodeInsideWmaContext>b__0()
at Microsoft.Office.Server.WorkManagement.Internal.WmaContextUtils.ExecuteCodeInsideWmaContext(Action toRun, WmaContextType allowedContexts)
at Microsoft.Office.Server.WorkManagement.Internal.BaseContextRunner`2.ExecuteAndEnsureContextValid(Action toRun, TContextState serviceUserState, String actionName)
at Microsoft.Office.Server.WorkManagement.Internal.BaseContextRunner`2.ExecuteInSpContext(ThreadParams threadParams)
at Microsoft.Office.Server.WorkManagement.Internal.BaseContextRunner`2.ExecuteInDiagnosticScope(ThreadParams threadParams)
at Microsoft.Office.Server.WorkManagement.Internal.BaseContextRunner`2.Run(Object tParams)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
SPRequest.MapUrlToListAndView: UserPrincipalName=, AppPrincipalName= ,bstrUrl=https://ksi-server.com/customer/issuetracking ,bstrUrlToMap=/customer/issuetracking/Lists/Tasks/MyOpenTasks.aspx
There is no "UserPrincipalName" set, therefore the "access denied"-error ?
Setup:
1 Webfrontend Server
1 Application Server
1 Database Server
Work "Work Management Service" is running on the Frontend-server, created with the "SharePoint Hosted Services" app-pool.

Similar Messages

Task Table in Custom DB as provider in Work Management Service?

I have a task table on a SQL 2008 Database (with usual task columns like assigned_to, task_title, status etc).
I understand that custom providers are unsupported for WMS.
Is it possible to create an External List (BCS) connecting to the SQL task table and use that as a provider for WMS?

Hi Mahesh,
Although the implementation of work management service application is based on the provider model, I reckon the current SP 2013 RTM does not support custom providers. Only SharePoint task lists, Project server and MS Exchange are supported for now.
Regards,
Yatin

Problem in adding Custom Provider for Work Management Service

Hello,
I'm facing an issue in adding custom provider for work management service. As you are aware, Work management service is a Provider model and we
can integrate with other systems by adding custom providers. So with that confidence, i have started writing a connector as mentioned below.
Step - 1: Added new provider xml in the below path
"C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\CONFIG\WorkManagementService\Providers"
Provider Name: provider.bizagitasklist
Provider XML Content:
<Provider ProviderKey="DAA52AF3-A147-4086-8C0C-82D2F83A089D" OverrideProviderKey="" Assembly="adidas.TaskProvider, Version=1.0.0.0, Culture=neutral, PublicKeyToken=5d6f3e6be60a351b" > </Provider>
Step -2: Added a class which inherits "IWmaTaskProvider" and implemented the override methods.
public class BizAgiTaskListProvider : IWmaTaskProvider
public string LocalizedProviderName
get { return "BizAgiTaskListProvider"; }
public string ProviderName
get { return "BizAgiTaskListProvider"; }
public Microsoft.Office.Server.WorkManagement.CalloutInfo GetCalloutInfo(IWmaTaskContext context, string taskExternalKey, string locationExternalKey)
return null;
public DashboardExtensionInfo GetDashboardExtensionInfo(IWmaBasicProviderContext context)
return new DashboardExtensionInfo { ClassName = "SP.UI.SharePointExtension" };
public BulkEditResult HandleBulkEdits(IWmaTaskContext context, BulkEdit updates)
return null;
public TaskEditResult HandleTaskEdit(IWmaTaskContext context, BaseAggregatorToProviderTaskUpdate taskUpdate)
return null;
public void RefreshSingleTask(IWmaTaskRefreshContext context, string externalKey)
public void RefreshTasks(IWmaTaskRefreshContext context)
//context.WriteProviderCustomData(
Step – 3: Written a class to fetch the tasks from BizAgi System which has method to provide the task data.
But I’m not able to feed those tasks in the class written in Step – 2 as I’m able to find any method which will take Tasks as Input and I’m not
sure about the format of tasks.
I’m able to debug the provider, and the breakpoint hitting in only one method and two properties.
(LocalizedProviderName, ProviderName, GetDashboardExtensionInfo).
Can you please help me to proceed further in implementing the above solution?
Best Regards
Mahesh

Hi Mahesh,
Although the implementation of work management service application is based on the provider model, I reckon the current SP 2013 RTM does not support custom providers. Only SharePoint task lists, Project server and MS Exchange are supported for now.
Regards,
Yatin

Work Management Service Application

does anyone have a step by step guide on how to create from scratch a work management service application, i have deleted mine due to issues with task syncs i think it was the configuration of this application that was causing this issue,
any help welcome.
Cheers

Hi,
According to your post, my understanding is that you wanted to create Work Management Service Application.
The following Service Applications must be provisioned before you can deploy the Work Management Service Application:
Search
User Profile
In addition to this, the Work Management service account must have some further permissions configured:
Full Control on the User Profile Service Application
Grant Access To Process Identity
To Create Work Management Service Application, Navigate to Application Management in SharePoint central administration, select Manage Service Application link. In Service applications page, create new Work Management Service Application, and specify the
details.
After re-create a new Work Management Service Application, we need to:
Create a new Application Pool, but use the same account as for the Application Pool hosting your My Sites/Social or Portal.
Run a crawl
Incremental, continuous or full crawl should suffice.
More information:
http://consulting.risualblogs.com/blog/2013/10/23/sharepoint-2013work-management-service-application/
http://sureshpydi.blogspot.in/2013/11/work-management-service-application-in.html
http://zimmergren.net/technical/tip-work-management-service-application-keeps-telling-us-last-updated-at-111901-1200-am-fixes
http://blogs.technet.com/b/praveenh/archive/2013/08/22/work-management-service-application.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Work Management Service (WMS) Application on mulit-farms

Hi guys,
Is there any limitation for configuration the Work Management Service (WMS) Application on multi-farms?
I have 2 farms – farm A hosts all SAs and farm B hosts only web contents.
I understand there is dependency between WMS and search and UPS. Does that mean I cannot deploy my WMS on farm A?
Thanks

Hi,
According to your post, my understanding is that you want to configuration the Work Management Service (WMS) Application on multi-farms.
Per my knowleadge, you can deploy Work Management Service on farm A.
Though there is dependency between WMS and search and UPS, , some service applications such as Search and User Profile can be shared across server farms in SharePoint 2013.
In addition, you can also configure a SharePoint Server 2013 content farm that receives search queries to trust the SharePoint Server 2013 farm that sends the queries.
More information:
Share service applications across farms in SharePoint 2013
Configure trust for search between two SharePoint Server 2013 farms
SharePoint 2013: Work Management Service Application
Best Regards,
Linda Li
Linda Li
TechNet Community Support

BPEL Services with Task are ending in Recovery console

Hi All,
I have a BPEL service with task activity. Once the task service is invoked, the BPEL service is ending up in recovery console. Not sure why this is happening, we are currently on SOA 10.1.3.3.1+MLR18.
Note: In the same service I have a debug statement after the task initiation and before the receive activity of task. Once the BPEL service is invoked log I can see that my debug statement is getting executed. It means that in the back end my task is getting executed but it is not shown in BPEL console or WFTASK table.
Please suggest if we have I am missing any thing.
Thanks
Ramu.

Hi Ramu,
Are you able to recover the process from the manual recovery section ? If yes, then its fine and now turn the cube, wf, engine loggers to DEBUG and see the corresponding errors in the log file.(to figure out the root cause)
Regards
A

Substitute tasks not shown in UWL but available in SBWP

Hi, I am trying to test substitute functionality in our custom iview. I have added code(available in attached file) in UWL XML which shows Manage Substitution button and substitute tasks are shown in SBWP but not in UWL. What else I need so tasks show up in UWL? Thanks in advance

Nilesh Telkikar wrote:
Is there any authorizations required in portal to add substitution?
page 14, http://www.sap-press.de/download/dateien/1461/146_leseprobe.pdf
Nilesh Telkikar wrote:
I see entries in SAP table HRUS_D2 but portal table KMC_WF_SUBSTITUTE is empty when I add substitution.
sorry, Im not familiar with the table. But regarding your expectation of new entries, did you saw that already?:
UWL FAQ - Business Process Expert - SCN Wiki
Substitution - Getting Started - Using SAP Software - SAP Library
regards

Does Microsoft offer Managed services for this IIS layer down (IaaS)?

We are interested in managing a SharePoint 2013 implementation but not the IaaS?

Microsoft would probably refer you to a Microsoft Partner for Managed services. We are a Cloud OS Partner and they have been providing us plenty of work around Managed services in Azure.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Tasks are missing in Approval inbox

Dear Experts
We are using SRM 7.0 Version 701. we are facing a problem in approval inbox. The Total tasks are shown as 35 but we are able to see only 33 tasks (33/35). there is no trace about the remaining two tasks in approval link in portal. We checked in the Tcode BBP_PD we are able to find the status of those two tasks, but the same is not seen in the approval inbox in portal. Please suggest what can be done to solve this problem.
Regards
Arun.K.P

Dear Experts
We are using SRM 7.0 Version 701. we are facing a problem in approval inbox. The Total tasks are shown as 35 but we are able to see only 33 tasks (33/35). there is no trace about the remaining two tasks in approval link in portal. We checked in the Tcode BBP_PD we are able to find the status of those two tasks, but the same is not seen in the approval inbox in portal. Please suggest what can be done to solve this problem.
Regards
Arun.K.P

Custom Work Manager not shown in WL Server Admin Console

An application scoped custom work manager is to be configured, for which the files weblogic-application.xml, weblogic-ejb-jar.xml, weblogic.xml have been defined. After it is deployed on the server, custom work manager is not being shown in the list on console -> deployments -> application -> monitoring -> workload.
What could be the reason? Is there something which is missed out?

Hi Justin,
According to the error message and the issue can be caused by the edition of your SSRS is not support for the custom data provider. For example the express edition have limitation support on this:
Features Supported by the Editions of SQL Server 2012 .
If your edition is the supportted edition and the issue can be caused by the custom data provider do not necessarily support all the functionality supplied by Reporting Services data processing extensions. In addition, some OLE DB data providers and ODBC
drivers can be used to author and preview reports, but are not designed to support reports published on a report server. For example, the Microsoft OLE DB Provider for Jet is not supported on the report server. For more information, see
Data Processing Extensions and .NET Framework Data Providers (SSRS).
If you are running on a 32-bit platform, the data provider must be compiled for a 32-bit platform. If you are running on a 64-bit platform, the data provider must be compiled for the 64-bit platform. You cannot use a 32-bit data provider wrapped with 64-bit
interfaces on a 64 bit platform.
More details information:Data Sources Supported by Reporting Services (SSRS)
Similar thread for your reference：
ERROR: An attempt has been made to use a data extension 'SQL' that is not registered for
this report server.
Error when viewing SSRS report with SQL Azure as data source
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

No users are shown for Service Desk functionality in SOLMAN 4.0

Hello!
I would like to set up the business partners for Service Desk in SAP Solution Manager.
If I choose the solution and execute "Edit --> Create Business partner" for the SAP R/3 4.7 then I get the warning no users are shown under the system.
For the SAP SRM 5.0 I get only one user (SOLMAN<SID><CLNT>), meanwhile I set the data selection to blank.
I also copied the user account of SOLMAN<SID><CLNT> to the user test with no success.
I have assigned the Object S_RFC_ and S_USER_GRP.
The users have also the profile SAP_ALL.
How can this problem be solved?
Thank you very much!
regards
Thom

Thank you very much!
The problem is solved!
Im my case was necessary to apply SAP Note 1055630.
I have assigned the role "SAP_SM_S_USER_GRP" to the user with RFC_READ connection, refreshed the last alert in DSWP and tha is.
regards!
Thom

No users are shown for Service Desk functionality in SOLMAN

Hello!
I would like to set up the business partners for Service Desk in SAP Solution Manager.
If I choose the solution and execute "Edit --> Create Business partner"
no users are shown under the system.
Especially for the SAP R/3 4.7 system it is the case.
If I change the data selection for an earlier time or leave blank, the situation does not change, meanwhile I have enough users in the satellitesystems.
How can this problem be solved? 
Thank you very much!
regards
Thom

Hi,
Answering your question!
Ans. 1. Either user should have SAP_ALL + S_RFC.. it is very important to have S_RFC object. SAP excluded S_RFC from SAP_ALL for the security reason.
or , any user should have authority to create and delete users + S_RFC, S_RFCACL & S_T-CODE.. I just did my setup, so I remember after searching for long long....
Ans. 2. you need the following RFC's for sattelite system;
>>> SM_<SID>CLNT(CLIENT#)_READ
>>> SM_<SID>CLNT(CLIENT#)_TRUSTED
>>> SM_<SID>CLNT(CLIENT#)_TMW
you should see them in solman sm59.... make sure you use proper user with proper OBJECT. other wise, u'll see bunch of dumps every hour.. Let me know if you need any other help!!
Thanks,
I hope this will fix your problem

Are the WLS 9.1 Web Service Ant Tasks ready for prime time?

I am trying to create a Proof of Concept (POC) for Enterprise and B2B Services at Wendy's Int'l, Inc.
As part of this POC, I created a WSDL for an in-house service and then used the wsdlc and jwsc Ant Tasks to translate this WSDL to Java classes and ultimately (I hoped) a deployable services.
In this document, I describe the issues I encountered setting up what I consider to be a simple POC.
I'll try to attach my WSDL file and build.xml so you can follow along.
I'll also try to attach my CSS file so you can compare how the generated WSDL appears in the Browser to the way I want it to appear.
If attachments are not allowed on these forums, then I will wait and see if there is interest in those documents before I paste them under this topic.
Some preliminary information about my environment.
Environment:
 Windows XP Pro SP2
 WebLogic 9.1
 Java 1.5.0_04
Service Name:
 AppRelease
Note: If I modify my WSDL (perhaps to add a new Operation or to change the definition of an element) and run wsdlc again, the AppReleaseSOAPPortImpl.java file is overwritten For this reason, I implemented my service logic in a class called AppReleaseServiceImple.java.
Now, for the issues.
1. Bug:
In the WSDL generated by wsdlc, the wsdl:part child of the wsdl:message tag is erroneously prefixed with a colon.
This occurs whether or not I specify a prefix for the http://schemas.xmlsoap.org/wsdl/ namespace.
Work around: Extract the wsdl from the jar file, fix it and add it back into the jar.
2. Bug:
In the WSDL generated by wsdlc, the wsdl:input and wsdl:output children of the wsdl:operation child of wsdl:portType tag are erroneously prefixed with a colon. Like 1 above, this occurs whether or not I specify a prefix for the http://schemas.xmlsoap.org/wsdl/ namespace.
Work around: Extract the wsdl from the jar file, fix it and add it back into the jar.
The error message generated by Bugs 1 and 2 is not helpful in diagnosing the problem:
[jwsc] Error at line:46 col:7 ':' expected [?! -- [CDATA[ ]
3. Bug:
In the WSDL generated by wsdlc, the documentation elements have all of my html elements stripped out, as well as my xhtml and wsdl namespace references. This completely negates one of the best features of the documentation tag, being able to present the WSDL in a browser as a nicely formatted, human friendly document which is also the underlying WSDL that can be viewed when the person views the source document.
I label this as a bug because it greatly reduces the functionality of the resulting WSDL.
4. Annoyance:
The WSDL generated by wsdlc has all of my comments stripped out, except the comments in the xsd:schema section of the wsdl:types element. I would prefer that all my comments be left in the WSDL, but if comments must be stripped out then I think all of the comments should be stripped out.
5. Annoyance:
The WSDL generated by wsdlc has my CSS specification stripped.
Work around: I donâ€™t know if adding the CSS back will do any good because I have not yet created a deployable service (see the last issue below).
6. Annoyance:
The WSDL generated by wsdlc has different namespace prefixes than the ones I specified for my application's namespace and for the http://schemas.xmlsoap.org/wsdl/soap/ namespace.
Work around: Perform a find/replace on namespace prefixes "s0" and "s1" to return them to my prefered values.
Another thing I can do at this point is simply replace the generated WSDL in the jar file with my original WSDL. This would address issues 1 thru 6 above.
7. Annoyance:
The java source files created by wsdlc are put into a jar file. This makes it annoying when working within a traditional IDE like Eclipse because there is no way to reference the source files within the jar as working source.
Work around: Extract the source files from the jar and identify the resulting directory structure as part of the source structure of the project.
8. Bug:
The jwsc task complains if the same parameter name is used in multiple operations. I received the following Errors from jwsc:
[jwsc] C:\IDE\workspace\Acre-WL9.1\AppReleaseSOAPPort.java 0:0
[jwsc] [ERROR] - Parameter element "{http://acre.services.wendys.com/AppRelease/}garRequest" is not unique across document/literal bare WebService.
Since the operation names are unique, I see no reason to also require uniqueness in the parameter names used by those operations.
Work around: Use unique element names for the input parameters of the services operations.
9. Bug:
Once items 1, 2 and 8 above are taken care of, jwsc fails with the following error:
java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.j2ee.descriptor.ApplicationBeanImpl
This seems to be due to the weblogic.jar file not being in the System Classpath.
However, I should note that when I set verbose="on" and debug="on" in the jwsc ant task, there was a message from the task which stated "[jwsc] [search path for class files: [big freakinâ€™ jar list]". In the big freakinâ€™ jar list, I did find weblogic.jar and weblogic.jar has the required ApplicationBeanImpl. This indicates to me that the jwsc task does not fully honor either its classpathref attribute, nor an embedded classpath element.
Work around: Make sure the weblogic.jar is in the System Classpath.
10. Bug:
I fixed bug #9 by running a setDomainEnv script and then ran my ant task. This time I received the following output:
ant build-serviceBuildfile: build.xml
build-service:
[jwsc] 1 JWS files will be processed.
[jwsc] Processing JWS: C:\IDE\workspace\Acre-WL9.1\src\com\wendys\services\acre\AppReleaseServiceImpl.java
[jwsc] JWS: C:\IDE\workspace\Acre-WL9.1\src\com\wendys\services\acre\AppReleaseServiceImpl.java Validated.
[AntUtil.deleteDir] Deleting directory <some temporary directory>
BUILD FAILED
java.lang.ExceptionInInitializerError
At this point, I am completely stymied about how to proceed.
I wonder what new issues await once this 10th issue is addressed.
Really, is this tool set ready for prime time?

Sorry to hear you are having so many issues with using the WLS 9.1 web service Ant tasks, inside of Eclipse.
I generally create a User Library for the couple weblogic jars needed, and use it (the User Library) in my Eclipse projects that I create JWSes in. 
I also have a separate WebLogic Library in Eclipse (actually 2 libraries since I work with WL 8.1 and now WL 9.1). As you may know, one of the long-standing issues with the Ant integration within Eclipse is the fact that Ant, being an External Tool, does not receive the Project-specific Paths/Libraries. However, since most Java-relevant Ant tasks can take classpath and classpathref attributes, this is usually not an issue. In the case of the BEA-supplied wsdlc Ant task, it is apparent from the verbose/debug console output that wsdlc can see the jars in its classpathref, but it ignores those references when resolving class references and instead only uses the system classpath.

I've only needed the weblogic.jar and xbean.jar, not all the ones you mentioned in an earlier thread of this post. 
I have not tried to winnow down exactly which jars are required. I simply included all the jars that exist and were added to the system classpath by the setDomainEnv.bat file created by WebLogic 9.1.

Afterwards, I create an Ant Builder to build the JWS Web Service EAR, as opposed to fiddlin' with Eclipse. 
I too use Ant to build my deployable archives. Eclipse is simply my IDE of choice. I validated that all the issues I listed occurred when running Ant from the command line.

If you are interested in how I do it, send me an e-mail (to [email protected]), and I'll send you a zip of one of these JWS projects. The build.xml script for the project, takes care of a lot of the "annoyances" you mentioned, one of which I think is not accurate. I have never had a situation where the wsdlc Ant task "overwrote" my XXXImpl.java file.. 
Since I'm doing a POC to determine how we want to proceed with developing Web Services and an SOA in general, I tried to perform the same tasks using Axis 2 1.0, the WebLogic 9.1 tools, and XFire 1.1. Overwriting the Impl class is a common failing in the tools which take a WSDL and create Java source files for all three frameworks.

Try my scenario. Add another operation to an existing WSDL, and run the wsdlc Ant Task. The old IMPL class will be over-written.

Because of this, I have a separate Impl class and I make sure that all its methods and annotations match the methods and annotations in the Skeleton Impl class created by wsdlc.

Maybe that's because I use the <exec> Ant task with jar.exe (the xvf options) in my build.xml, to only get what I need out of the .jar/.zip the wsdlc generates. I'm typically only interest in the interface class that my XXXImpl.java file needs to implements, because I use XMLBeans for the input args (and return values) of my web service operations. 
Perhaps. I am not using XMLBeans in any of the three frameworks because the resulting service seems to be lighter-weight in all three frameworks if XMLBeans is not used. I'm sure there will be scenarios where XMLBeans is preferred, but I have not encountered that case in this POC.

Regards,
Mike Wooten
Thanks for the follow-up.
Mike McAngus

When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?

Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint.

OSB Business Service Work Manager Doesnt Throttle

Hi,
I have a requrirement to throlle the number of concurrent requests going to an end point.
So i have used OSB business service where in i am calling an end point webservice, and configured a work manager in console and selected it in the dispatch policy
I deployed the workmanager on managed server. i specified max concurrent threads as 3.
I tried to test it and see that throttling doesnt really work.. All the requests sent are being sent at once not 3 at a time.
The expected behavior is first 3 sdhud go and then onc ethey complete next 3 similary next 3. But i dont see that behavior. Please let me know if i am doing any worng
below is my work manager configuration
Service Type Any XML Service
Transport Configuration
Protocol http
Load Balancing Algorithm round-robin
Endpoint URI <Specified the end point URI>
Retry Count 0
Retry Iteration Interval 0
Retry Application Errors Yes
HTTP Transport Configuration
Read Timeout 0
Connection Timeout 0
HTTP Request Method POST
Authentication None
Proxy Server
Follow HTTP redirects Disabled
Use Chunked Streaming Mode Enabled
Dispatch Policy WorkManagerTest
Message Handling Configuration
XOP/MTOM Support Disabled
Page Attachments to Disk No
Result Caching Not Supported
Any suggestions on this?
Edited by: 791951 on Mar 17, 2011 7:51 AM

If you need to throttle the Business service, then you should configure the throttling parameters in the Business Service -> Operational Settings tab
Choose your Business Service in the OSB Console -> Operational Settings
Throttling -Check this box to enable the throttling. Maximum Concurrency to 3, and Throttling Queue to x number of messages you wish to hold in the throttling queue

Work Management Service: No tasks are shown on MySite

Similar Messages

Maybe you are looking for